dmesg - run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-279.el6.x86_64 (mockbuild@x86-008.build.bos.redhat.com) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Wed Jun 13 18:24:36 EDT 2012
Command line: ro root=/dev/mapper/vg_vcstest1-LogVol01 intel_iommu=on rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_vcstest1/LogVol01 rd_LVM_LV=vg_vcstest1/LogVol00 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfe44000 (usable)
BIOS-e820: 00000000cfe44000 - 00000000cfe4c000 (ACPI data)
BIOS-e820: 00000000cfe4c000 - 00000000cfe4d000 (usable)
BIOS-e820: 00000000cfe4d000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 00000001affff000 (usable)
DMI 2.4 present.
SMBIOS version 2.4 @ 0xF4F40
DMI: HP ProLiant DL380 G5, BIOS P56 05/02/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1affff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcfe4d max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cfe4d000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cfe4d000 page 4k
kernel direct mapping tables up to cfe4d000 @ 8000-e000
init_memory_mapping: 0000000100000000-00000001affff000
0100000000 - 01afe00000 page 2M
01afe00000 - 01affff000 page 4k
kernel direct mapping tables up to 1affff000 @ c000-15000
RAMDISK: 7d33a000 - 7ffffa00
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000cfe447c0 0007C (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000cfe44840 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-607)
ACPI: DSDT 00000000cfe44940 023E8 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000cfe44100 00040
ACPI: SPCR 00000000cfe44140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000cfe441c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000cfe44200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000cfe44240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000cfe44280 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000cfe44480 0009E (v01 HP ProLiant 00000002 00000000)
ACPI: FFFF 00000000cfe44540 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000cfe446c0 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000cfe44700 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: SSDT 00000000cfe49000 00C85 (v01 HP SSDTP 00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000001affff000
Bootmem setup node 0 0000000000000000-00000001affff000
NODE_DATA [0000000000010000 - 0000000000043fff]
bootmap [0000000000044000 - 0000000000079fff] pages 36
(8 early reservations) ==> bootmem [0000000000 - 01affff000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002012024] TEXT DATA BSS ==> [0001000000 - 0002012024]
#3 [007d33a000 - 007ffffa00] RAMDISK ==> [007d33a000 - 007ffffa00]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [0002013000 - 0002013118] BRK ==> [0002013000 - 0002013118]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000010000] PGTABLE ==> [000000c000 - 0000010000]
found SMP MP-table at [ffff8800000f4f80] f4f80
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 6911MB)
[ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880028600000-ffff88002dbfffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x001affff
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000cfe44
0: 0x000cfe4c -> 0x000cfe4d
0: 0x00100000 -> 0x001affff
On node 0 totalpages: 1572322
DMA zone: 56 pages used for memmap
DMA zone: 107 pages reserved
DMA zone: 3835 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833149 pages, LIFO batch:31
Normal zone: 9856 pages used for memmap
Normal zone: 711039 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfe44000 - 00000000cfe4c000
PM: Registered nosave memory: 00000000cfe4d000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94424 r8192 d24360 u262144
pcpu-alloc: s94424 r8192 d24360 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1548023
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_vcstest1-LogVol01 intel_iommu=on rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_vcstest1/LogVol01 rd_LVM_LV=vg_vcstest1/LogVol00 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
Intel-IOMMU: enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 5940272k/7077884k available (5151k kernel code, 788596k absent, 349016k reserved, 7166k data, 1260k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2666.597 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.19 BogoMIPS (lpj=2666597)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21015 entries in 83 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU 5150 @ 2.66GHz stepping 06
Performance Events: PEBS fmt0-, Core2 events, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c)
Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (10666.38 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff8801ab8d8920), AE_AML_BUFFER_LIMIT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1000-0x101f]
pci 0000:00:1d.1: reg 20: [io 0x1020-0x103f]
pci 0000:00:1d.2: reg 20: [io 0x1040-0x105f]
pci 0000:00:1d.3: reg 20: [io 0x1060-0x107f]
pci 0000:00:1d.7: reg 10: [mem 0xf7df0000-0xf7df03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0x0500-0x050f]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
pci 0000:09:00.3: PME# disabled
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 09-12]
pci 0000:00:02.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.0: bridge window [mem 0xfdc00000-0xfddfffff]
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:01.0: PME# disabled
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:02.0: PME# disabled
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:09:00.0: PCI bridge to [bus 0a-11]
pci 0000:09:00.0: bridge window [io 0x5000-0x5fff]
pci 0000:09:00.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:09:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:00.0: PCI bridge to [bus 0b-0d]
pci 0000:0a:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:0a:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:0a:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0e:00.0: reg 10: [io 0x5000-0x50ff]
pci 0000:0e:00.0: reg 14: [mem 0xfddf0000-0xfddf3fff 64bit]
pci 0000:0e:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:0e:00.1: reg 10: [io 0x5400-0x54ff]
pci 0000:0e:00.1: reg 14: [mem 0xfdde0000-0xfdde3fff 64bit]
pci 0000:0e:00.1: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:0a:01.0: PCI bridge to [bus 0e-10]
pci 0000:0a:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:0a:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:0a:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:02.0: PCI bridge to [bus 11-11]
pci 0000:0a:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:0a:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:0a:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:09:00.3: PCI bridge to [bus 12-12]
pci 0000:09:00.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:09:00.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:09:00.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: reg 10: [mem 0xfdb00000-0xfdbfffff 64bit]
pci 0000:06:00.0: reg 18: [io 0x4000-0x40ff]
pci 0000:06:00.0: reg 1c: [mem 0xfdaf0000-0xfdaf0fff 64bit]
pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:03.0: PCI bridge to [bus 06-08]
pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:03.0: bridge window [mem 0xfda00000-0xfdbfffff]
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:13:00.0: reg 10: [mem 0xfdfe0000-0xfdffffff]
pci 0000:13:00.0: reg 14: [mem 0xfdf00000-0xfdf7ffff]
pci 0000:13:00.0: reg 18: [io 0x6000-0x601f]
pci 0000:13:00.0: reg 1c: [mem 0xfdef0000-0xfdef3fff]
pci 0000:13:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:13:00.0: PME# supported from D0 D3hot D3cold
pci 0000:13:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 13-15]
pci 0000:00:04.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdffffff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:05.0: PCI bridge to [bus 16-16]
pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:06.0: PCI bridge to [bus 17-19]
pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:07.0: PCI bridge to [bus 1a-1a]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:03.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff]
pci 0000:01:03.0: reg 18: [mem 0xf7ff0000-0xf7ffffff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff]
pci 0000:01:04.0: reg 14: [mem 0xf7fe0000-0xf7fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff]
pci 0000:01:04.2: reg 14: [mem 0xf7fd0000-0xf7fd07ff]
pci 0000:01:04.2: reg 18: [mem 0xf7fc0000-0xf7fc3fff]
pci 0000:01:04.2: reg 1c: [mem 0xf7f00000-0xf7f7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20: [io 0x3800-0x381f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10: [mem 0xf7ef0000-0xf7ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
ACPI Warning for \_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20090903/nspredef-433)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 PNP0a08 (active)
pnp 00:01: [io 0x0070-0x0077]
pnp 00:01: [io 0x0408-0x040f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0700-0x071f]
pnp 00:01: [io 0x0800-0x083f]
pnp 00:01: [io 0x0900-0x097f]
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0c80-0x0c83]
pnp 00:01: [io 0x0cd4-0x0cd7]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x00f0]
pnp 00:01: [io 0x0ca0-0x0ca1]
pnp 00:01: [io 0x0ca4-0x0ca5]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [io 0x02f8-0x02ff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0ca2-0x0ca3]
pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [dma 7]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x004e-0x004f]
pnp 00:08: [io 0x0620-0x065f]
pnp 00:08: [io 0x0680-0x069f]
pnp 00:08: [io 0x0600-0x061f]
pnp 00:08: [io 0x0660-0x067f]
pnp 00:08: [io 0x0300-0x030f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:09: [irq 4]
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0800-0x083f] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
PCI: max bus depth: 3 pci_try_num: 4
pci 0000:00:02.0: BAR 15: assigned [mem 0xd0000000-0xd00fffff pref]
pci 0000:00:03.0: BAR 15: assigned [mem 0xd0100000-0xd01fffff pref]
pci 0000:00:04.0: BAR 15: assigned [mem 0xd0200000-0xd02fffff pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0300000-0xd03fffff pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0400000-0xd04fffff pref]
pci 0000:09:00.0: BAR 15: assigned [mem 0xd0000000-0xd00fffff pref]
pci 0000:0a:01.0: BAR 15: assigned [mem 0xd0000000-0xd00fffff pref]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0d]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0d]
pci 0000:0a:00.0: bridge window [io disabled]
pci 0000:0a:00.0: bridge window [mem disabled]
pci 0000:0a:00.0: bridge window [mem pref disabled]
pci 0000:0e:00.0: BAR 6: assigned [mem 0xd0000000-0xd003ffff pref]
pci 0000:0e:00.1: BAR 6: assigned [mem 0xd0040000-0xd007ffff pref]
pci 0000:0a:01.0: PCI bridge to [bus 0e-10]
pci 0000:0a:01.0: PCI bridge to [bus 0e-10]
pci 0000:0a:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:0a:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:0a:01.0: bridge window [mem 0xd0000000-0xd00fffff pref]
pci 0000:0a:02.0: PCI bridge to [bus 11-11]
pci 0000:0a:02.0: PCI bridge to [bus 11-11]
pci 0000:0a:02.0: bridge window [io disabled]
pci 0000:0a:02.0: bridge window [mem disabled]
pci 0000:0a:02.0: bridge window [mem pref disabled]
pci 0000:09:00.0: PCI bridge to [bus 0a-11]
pci 0000:09:00.0: PCI bridge to [bus 0a-11]
pci 0000:09:00.0: bridge window [io 0x5000-0x5fff]
pci 0000:09:00.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:09:00.0: bridge window [mem 0xd0000000-0xd00fffff pref]
pci 0000:09:00.3: PCI bridge to [bus 12-12]
pci 0000:09:00.3: PCI bridge to [bus 12-12]
pci 0000:09:00.3: bridge window [io disabled]
pci 0000:09:00.3: bridge window [mem disabled]
pci 0000:09:00.3: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 09-12]
pci 0000:00:02.0: PCI bridge to [bus 09-12]
pci 0000:00:02.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.0: bridge window [mem 0xfdc00000-0xfddfffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd00fffff pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0xd0100000-0xd013ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 06-08]
pci 0000:00:03.0: PCI bridge to [bus 06-08]
pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:03.0: bridge window [mem 0xfda00000-0xfdbfffff]
pci 0000:00:03.0: bridge window [mem 0xd0100000-0xd01fffff pref]
pci 0000:13:00.0: BAR 6: assigned [mem 0xd0200000-0xd023ffff pref]
pci 0000:00:04.0: PCI bridge to [bus 13-15]
pci 0000:00:04.0: PCI bridge to [bus 13-15]
pci 0000:00:04.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdffffff]
pci 0000:00:04.0: bridge window [mem 0xd0200000-0xd02fffff pref]
pci 0000:00:05.0: PCI bridge to [bus 16-16]
pci 0000:00:05.0: PCI bridge to [bus 16-16]
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [mem disabled]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 17-19]
pci 0000:00:06.0: PCI bridge to [bus 17-19]
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem disabled]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 1a-1a]
pci 0000:00:07.0: PCI bridge to [bus 1a-1a]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:02:00.0: BAR 15: assigned [mem 0xd0300000-0xd03fffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xd0300000-0xd03007ff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io disabled]
pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:02:00.0: bridge window [mem 0xd0300000-0xd03fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd03fffff pref]
pci 0000:04:00.0: BAR 15: assigned [mem 0xd0400000-0xd04fffff pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xd0400000-0xd04007ff pref]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io disabled]
pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:04:00.0: bridge window [mem 0xd0400000-0xd04fffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io disabled]
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd04fffff pref]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf7e00000-0xf7e1ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf7e20000-0xf7e2ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:09:00.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:0a:00.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:0a:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:0a:01.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:0a:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:0a:02.0: setting latency timer to 64
pci 0000:09:00.3: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:09: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:09: resource 1 [mem 0xfdc00000-0xfddfffff]
pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd00fffff pref]
pci_bus 0000:0a: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:0a: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:0a: resource 2 [mem 0xd0000000-0xd00fffff pref]
pci_bus 0000:0e: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:0e: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:0e: resource 2 [mem 0xd0000000-0xd00fffff pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdbfffff]
pci_bus 0000:06: resource 2 [mem 0xd0100000-0xd01fffff pref]
pci_bus 0000:13: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:13: resource 1 [mem 0xfde00000-0xfdffffff]
pci_bus 0000:13: resource 2 [mem 0xd0200000-0xd02fffff pref]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:02: resource 2 [mem 0xd0300000-0xd03fffff pref]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:03: resource 2 [mem 0xd0300000-0xd03fffff pref]
pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 2 [mem 0xd0400000-0xd04fffff pref]
pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:05: resource 2 [mem 0xd0400000-0xd04fffff pref]
pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:01:03.0: Boot video device
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
pci 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
pci 0000:01:04.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 45846k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1414663548.262:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 11691
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 2E8E5C39AF9EC7F8
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: SSDT 00000000cfe4f800 000AD (v01 HP CPU0CST 00000001 INTL 20061109)
ACPI: SSDT 00000000cfe4f900 000AD (v01 HP CPU1CST 00000001 INTL 20061109)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-279.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-279.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-279.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-279.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-279.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-279.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:01:04.4
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2014-10-30 10:05:49 UTC (1414663549)
Initalizing network drop monitor service
Freeing unused kernel memory: 1260k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 972k freed
Freeing unused kernel memory: 1732k freed
dracut: dracut-004-283.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
radeon 0000:01:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).
[drm] register mmio base: 0xF7FF0000
[drm] register mmio size: 65536
radeon 0000:01:03.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (32M used)
radeon 0000:01:03.0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 2995042 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[TTM] Initializing DMA pool allocator.
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: ib pool ready.
[drm] PCIE GART of 512M enabled (table at 0x000000007F880000).
radeon 0000:01:03.0: WB disabled
[drm] fence driver on ring 0 use gpu addr 0xb8000000 and cpu addr 0xffff88007f824000
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x00000000B8001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] VGA
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] fb mappable at 0xD8040000
[drm] vram apper at 0xD8000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
usb 6-1: new full speed USB device number 2 using uhci_hcd
usb 6-1: New USB device found, idVendor=03f0, idProduct=1027
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Virtual Keyboard
usb 6-1: Manufacturer: HP
usb 6-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input3
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.13.0 20080528 for 0000:01:03.0 on minor 0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input4
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
Refined TSC clocksource calibration: 2666.666 MHz.
Switching to clocksource tsc
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
ata1.00: ATAPI: DW-224E-V, C.CA, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TEAC DW-224E-V C.CA PQ: 0 ANSI: 5
HP CISS Driver (v 4.6.28-24 )
cciss 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 26 for MSI/MSI-X
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 27 for MSI/MSI-X
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 28 for MSI/MSI-X
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 29 for MSI/MSI-X
cciss 0000:06:00.0: cciss0: at PCI 0000:06:00.0 IRQ 26 using DAC
cciss/c0d0: p1 p2
scsi2 : cciss
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
qla2xxx [0000:00:00.0]-0005: QLogic Fibre Channel HBA Driver: 8.04.00.04.06.3-k.
qla2xxx 0000:0e:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
qla2xxx [0000:0e:00.0]-001d: Found an ISP2432 irq 17 iobase 0xffffc900117c2000.
qla2xxx [0000:0e:00.0]-0035:3: MSI-X: Unsupported ISP2432 (0x2, 0x0).
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
qla2xxx 0000:0e:00.0: irq 30 for MSI/MSI-X
qla2xxx 0000:0e:00.0: setting latency timer to 64
qla2xxx 0000:0e:00.0: firmware: requesting ql2400_fw.bin
scsi3 : qla2xxx
qla2xxx [0000:0e:00.0]-00fb:3: QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA.
qla2xxx [0000:0e:00.0]-00fc:3: ISP2432: PCIe (2.5GT/s x4) @ 0000:0e:00.0 hdma+ host#=3 fw=5.06.05 (9496).
qla2xxx 0000:0e:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
qla2xxx [0000:0e:00.1]-001d: Found an ISP2432 irq 18 iobase 0xffffc90000c54000.
qla2xxx [0000:0e:00.1]-0035:4: MSI-X: Unsupported ISP2432 (0x2, 0x0).
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
qla2xxx 0000:0e:00.1: irq 31 for MSI/MSI-X
qla2xxx 0000:0e:00.1: setting latency timer to 64
scsi4 : qla2xxx
qla2xxx [0000:0e:00.1]-00fb:4: QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA.
qla2xxx [0000:0e:00.1]-00fc:4: ISP2432: PCIe (2.5GT/s x4) @ 0000:0e:00.1 hdma+ host#=4 fw=5.06.05 (9496).
scsi: waiting for bus probes to complete ...
dracut: Scanning devices for LVM logical volumes vg_vcstest1/LogVol01 vg_vcstest1/LogVol00
dracut: inactive '/dev/vg_vcstest1/LogVol01' [266.91 GiB] inherit
dracut: inactive '/dev/vg_vcstest1/LogVol00' [6.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_vcstest1-LogVol01
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1414663556.952:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Jun 13 2012
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 sig=0x6f6, pf=0x4, revision=0xd2
platform microcode: firmware: requesting intel-ucode/06-0f-06
microcode: CPU1 sig=0x6f6, pf=0x4, revision=0xd2
platform microcode: firmware: requesting intel-ucode/06-0f-06
Microcode Update Driver: v2.00 , Peter Oruba
sr 0:0:0:0: Attached scsi generic sg0 type 5
e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:13:00.0: Disabling ASPM L0s
e1000e 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:13:00.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
e1000e 0000:13:00.0: irq 32 for MSI/MSI-X
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
e1000e 0000:13:00.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
e1000e 0000:13:00.0: irq 34 for MSI/MSI-X
e1000e 0000:13:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:25:b8:3b
e1000e 0000:13:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:13:00.0: eth0: MAC: 3, PHY: 8, PBA No: G17304-006
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.1 (Dec 18, 2011)
bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw
bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:03:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:1b:78:99:c8:28
bnx2 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:05:00.0: eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 17, node addr 00:1b:78:99:c8:26
ipmi message handler version 39.2
IPMI System Interface driver.
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Adding ACPI-specified kcs state machine: duplicate interface
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21
IRQ 21/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 21
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11)
IPMI kcs interface initialized
hpwdt 0000:01:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST).
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.0, timer margin: 30 seconds (nowayout=0).
hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode. Opts:
Adding 6291448k swap on /dev/mapper/vg_vcstest1-LogVol00. Priority:-1 extents:1 across:6291448k
readahead-disable-service: delaying service auditd
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-bond0 instead
bonding: bond0: setting mode to active-backup (1).
bonding: bond0: Setting MII monitoring interval to 100.
ADDRCONF(NETDEV_UP): bond0: link is not ready
8021q: adding VLAN 0 to HW filter on device bond0
bonding: bond0: Adding slave eth1.
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
bnx2 0000:03:00.0: irq 35 for MSI/MSI-X
bnx2 0000:03:00.0: eth1: using MSI
bonding: bond0: enslaving eth1 as a backup interface with a down link.
bonding: bond0: Adding slave eth2.
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 36 for MSI/MSI-X
bnx2 0000:05:00.0: eth2: using MSI
bonding: bond0: enslaving eth2 as a backup interface with a down link.
bnx2 0000:03:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
bonding: bond0: making interface eth1 the new active one.
bonding: bond0: first active interface up!
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bnx2 0000:05:00.0: eth2: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth2, 1000 Mbps full duplex.
FS-Cache: Loaded
CacheFiles: Loaded
TECH PREVIEW: fscache may not be fully supported.
Please review provided documentation for limitations.
FS-Cache: Cache "mycache" added (type cachefiles)
CacheFiles: File cache on dm-0 registered
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
bnx2 0000:03:00.0: eth1: Added CNIC device
bnx2 0000:03:00.0: eth1: register_cnic failed
bnx2 0000:03:00.0: eth1: register_cnic failed
bnx2 0000:05:00.0: eth2: Added CNIC device
bnx2 0000:05:00.0: eth2: register_cnic failed
bnx2 0000:05:00.0: eth2: register_cnic failed
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.11 (Apr 24, 2012)
bnx2fc: bnx2fc FCoE not supported on eth2, flags: 8 fcoe_conn: 0
bnx2fc: bnx2fc FCoE not supported on eth1, flags: 8 fcoe_conn: 0
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
bond0: no IPv6 routers present
ipmi device interface
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
lo: Disabled Privacy Extensions
type=1305 audit(1414663605.519:87624): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
type=1305 audit(1414663605.519:87625): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
type=1307 audit(1414663605.518:87620): cwd="/var/gdm"
type=1302 audit(1414663605.518:87620): item=0 name="/usr/share/locale/en_US.UTF-8/LC_MESSAGES/atk10.mo"
type=1302 audit(1414663605.518:87620): item=1 name=(null) inode=262242 dev=fd:00 mode=040755 ouid=0 ogid=0 rdev=00:00
readahead-collector: starting delayed service auditd
readahead-collector: sorting
readahead-collector: finished
qla2xxx [0000:0e:00.0]-8038:3: Cable is unplugged...
qla2xxx [0000:0e:00.1]-8038:4: Cable is unplugged...
bonding: bond0: Removing slave eth1
bonding: bond0: Warning: the permanent HWaddr of eth1 - 00:1b:78:99:c8:28 - is still in use by bond0. Set the HWaddr of eth1 to a different address to avoid conflicts.
bonding: bond0: releasing active interface eth1
bonding: bond0: making interface eth2 the new active one.
bonding: bond0: Removing slave eth2
bonding: bond0: releasing active interface eth2
lo: Disabled Privacy Extensions
bonding: bond0: setting mode to active-backup (1).
bonding: bond0: Setting MII monitoring interval to 100.
ADDRCONF(NETDEV_UP): bond0: link is not ready
8021q: adding VLAN 0 to HW filter on device bond0
bonding: bond0: Adding slave eth1.
bnx2 0000:03:00.0: irq 35 for MSI/MSI-X
bnx2 0000:03:00.0: eth1: using MSI
bnx2 0000:03:00.0: eth1: register_cnic failed
bonding: bond0: enslaving eth1 as a backup interface with a down link.
bonding: bond0: Adding slave eth2.
bnx2 0000:05:00.0: irq 36 for MSI/MSI-X
bnx2 0000:05:00.0: eth2: using MSI
bnx2 0000:05:00.0: eth2: register_cnic failed
bonding: bond0: enslaving eth2 as a backup interface with a down link.
bnx2 0000:03:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
bonding: bond0: making interface eth1 the new active one.
bonding: bond0: first active interface up!
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bnx2 0000:05:00.0: eth2: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth2, 1000 Mbps full duplex.
bond0: no IPv6 routers present
bonding: bond0: Removing slave eth1
bonding: bond0: Warning: the permanent HWaddr of eth1 - 00:1b:78:99:c8:28 - is still in use by bond0. Set the HWaddr of eth1 to a different address to avoid conflicts.
bonding: bond0: releasing active interface eth1
bonding: bond0: making interface eth2 the new active one.
bonding: bond0: Removing slave eth2
bonding: bond0: releasing active interface eth2
lo: Disabled Privacy Extensions
bonding: bond0: setting mode to active-backup (1).
bonding: bond0: Setting MII monitoring interval to 100.
ADDRCONF(NETDEV_UP): bond0: link is not ready
8021q: adding VLAN 0 to HW filter on device bond0
bonding: bond0: Adding slave eth1.
bnx2 0000:03:00.0: irq 35 for MSI/MSI-X
bnx2 0000:03:00.0: eth1: using MSI
bnx2 0000:03:00.0: eth1: register_cnic failed
bonding: bond0: enslaving eth1 as a backup interface with a down link.
bonding: bond0: Adding slave eth2.
bnx2 0000:05:00.0: irq 36 for MSI/MSI-X
bnx2 0000:05:00.0: eth2: using MSI
bnx2 0000:05:00.0: eth2: register_cnic failed
bonding: bond0: enslaving eth2 as a backup interface with a down link.
bnx2 0000:03:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
bonding: bond0: making interface eth1 the new active one.
bonding: bond0: first active interface up!
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bnx2 0000:05:00.0: eth2: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth2, 1000 Mbps full duplex.
bond0: no IPv6 routers present
gdm-smartcard-w[607]: segfault at 7f5f29ca32e8 ip 00007f5f29ca32e8 sp 00007f5f295f8da8 error 4 in locale-archive[7f5f2a0e3000+5e91000]
fuse init (API version 7.13)
Bridge firewalling registered
cciss 0000:06:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
qla2xxx [0000:0e:00.0]-801c:3: Abort command issued nexus=3:0:0 -- 1 2002.
scsi 3:0:0:0: RAID HP MSA CONTROLLER 7.20 PQ: 0 ANSI: 4
scsi 3:0:0:0: Attached scsi generic sg1 type 12
scsi 3:0:0:1: Direct-Access HP MSA VOLUME 7.20 PQ: 0 ANSI: 4
scsi 3:0:0:1: Attached scsi generic sg2 type 0
sd 3:0:0:1: [sda] 71130720 512-byte logical blocks: (36.4 GB/33.9 GiB)
sd 3:0:0:1: [sda] Write Protect is off
sd 3:0:0:1: [sda] Mode Sense: 83 00 00 08
sd 3:0:0:1: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 3:0:0:1: [sda] Attached SCSI disk
sda: sda1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
sda: sda1 sda2
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
ssh: page allocation failure. order:1, mode:0x20
Pid: 22021, comm: ssh Tainted: G --------------- T 2.6.32-279.el6.x86_64 #1
Call Trace:
[] ? __alloc_pages_nodemask+0x77f/0x940
[] ? kmem_getpages+0x62/0x170
[] ? fallback_alloc+0x1ba/0x270
[] ? ____cache_alloc_node+0x99/0x160
[] ? kmem_cache_alloc+0x11b/0x190
[] ? sk_prot_alloc+0x48/0x1c0
[] ? sk_clone+0x22/0x2e0
[] ? inet_csk_clone+0x16/0xd0
[] ? tcp_create_openreq_child+0x23/0x450
[] ? tcp_v4_syn_recv_sock+0x4d/0x310
[] ? tcp_check_req+0x226/0x460
[] ? tcp_v4_do_rcv+0x35b/0x430
[] ? tcp_v4_rcv+0x4fe/0x8d0
[] ? ip_local_deliver_finish+0x0/0x2d0
[] ? ip_local_deliver_finish+0xdd/0x2d0
[] ? ip_local_deliver+0x98/0xa0
[] ? ip_rcv_finish+0x12d/0x440
[] ? ip_rcv+0x275/0x350
[] ? __netif_receive_skb+0x49b/0x6f0
[] ? process_backlog+0x9a/0x100
[] ? net_rx_action+0x103/0x2f0
[] ? __do_softirq+0xc1/0x1e0
[] ? call_softirq+0x1c/0x30
[] ? call_softirq+0x1c/0x30
[] ? do_softirq+0x65/0xa0
[] ? local_bh_enable_ip+0x9a/0xb0
[] ? _spin_unlock_bh+0x1b/0x20
[] ? release_sock+0xce/0xe0
[] ? inet_stream_connect+0x183/0x2c0
[] ? autoremove_wake_function+0x0/0x40
[] ? sys_connect+0xd7/0xf0
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0xd9/0xde
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ssh: page allocation failure. order:1, mode:0x20
Pid: 4745, comm: ssh Tainted: G --------------- T 2.6.32-279.el6.x86_64 #1
Call Trace:
[] ? __alloc_pages_nodemask+0x77f/0x940
[] ? kmem_getpages+0x62/0x170
[] ? fallback_alloc+0x1ba/0x270
[] ? ____cache_alloc_node+0x99/0x160
[] ? kmem_cache_alloc+0x11b/0x190
[] ? sk_prot_alloc+0x48/0x1c0
[] ? sk_clone+0x22/0x2e0
[] ? inet_csk_clone+0x16/0xd0
[] ? tcp_create_openreq_child+0x23/0x450
[] ? tcp_v4_syn_recv_sock+0x4d/0x310
[] ? tcp_check_req+0x226/0x460
[] ? tcp_v4_do_rcv+0x35b/0x430
[] ? tcp_v4_rcv+0x4fe/0x8d0
[] ? ip_local_deliver_finish+0x0/0x2d0
[] ? ip_local_deliver_finish+0xdd/0x2d0
[] ? ip_local_deliver+0x98/0xa0
[] ? ip_rcv_finish+0x12d/0x440
[] ? ip_rcv+0x275/0x350
[] ? __netif_receive_skb+0x49b/0x6f0
[] ? process_backlog+0x9a/0x100
[] ? net_rx_action+0x103/0x2f0
[] ? __do_softirq+0xc1/0x1e0
[] ? call_softirq+0x1c/0x30
[] ? call_softirq+0x1c/0x30
[] ? do_softirq+0x65/0xa0
[] ? local_bh_enable_ip+0x9a/0xb0
[] ? _spin_unlock_bh+0x1b/0x20
[] ? release_sock+0xce/0xe0
[] ? inet_stream_connect+0x183/0x2c0
[] ? autoremove_wake_function+0x0/0x40
[] ? sys_connect+0xd7/0xf0
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0xd9/0xde
possible SYN flooding on port 25. Sending cookies.
bonding: bond0: Removing slave eth1
bonding: bond0: Warning: the permanent HWaddr of eth1 - 00:1b:78:99:c8:28 - is still in use by bond0. Set the HWaddr of eth1 to a different address to avoid conflicts.
bonding: bond0: releasing active interface eth1
bonding: bond0: making interface eth2 the new active one.
bonding: unable to remove non-existent slave eth1 for bond bond0.
bonding: bond0: Removing slave eth2
bonding: bond0: releasing active interface eth2
lo: Disabled Privacy Extensions
bonding: bond0: setting mode to active-backup (1).
bonding: bond0: Setting MII monitoring interval to 100.
ADDRCONF(NETDEV_UP): bond0: link is not ready
8021q: adding VLAN 0 to HW filter on device bond0
bonding: bond0: Adding slave eth1.
bnx2 0000:03:00.0: irq 35 for MSI/MSI-X
bnx2 0000:03:00.0: eth1: using MSI
bnx2 0000:03:00.0: eth1: register_cnic failed
bonding: bond0: enslaving eth1 as a backup interface with a down link.
bonding: bond0: Adding slave eth2.
bnx2 0000:05:00.0: irq 36 for MSI/MSI-X
bnx2 0000:05:00.0: eth2: using MSI
bnx2 0000:05:00.0: eth2: register_cnic failed
bonding: bond0: enslaving eth2 as a backup interface with a down link.
bnx2 0000:03:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
bonding: bond0: making interface eth1 the new active one.
bonding: bond0: first active interface up!
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bnx2 0000:05:00.0: eth2: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth2, 1000 Mbps full duplex.
bond0: no IPv6 routers present
bonding: bond0: Removing slave eth1
bonding: bond0: Warning: the permanent HWaddr of eth1 - 00:1b:78:99:c8:28 - is still in use by bond0. Set the HWaddr of eth1 to a different address to avoid conflicts.
bonding: bond0: releasing active interface eth1
bonding: bond0: making interface eth2 the new active one.
bonding: bond0: Removing slave eth2
bonding: bond0: releasing active interface eth2
lo: Disabled Privacy Extensions
bonding: bond0: setting mode to active-backup (1).
bonding: bond0: Setting MII monitoring interval to 100.
ADDRCONF(NETDEV_UP): bond0: link is not ready
8021q: adding VLAN 0 to HW filter on device bond0
bonding: bond0: Adding slave eth1.
bnx2 0000:03:00.0: irq 35 for MSI/MSI-X
bnx2 0000:03:00.0: eth1: using MSI
bnx2 0000:03:00.0: eth1: register_cnic failed
bonding: bond0: enslaving eth1 as a backup interface with a down link.
bonding: bond0: Adding slave eth2.
bnx2 0000:05:00.0: irq 36 for MSI/MSI-X
bnx2 0000:05:00.0: eth2: using MSI
bnx2 0000:05:00.0: eth2: register_cnic failed
bonding: bond0: enslaving eth2 as a backup interface with a down link.
bnx2 0000:03:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
bonding: bond0: making interface eth1 the new active one.
bonding: bond0: first active interface up!
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bnx2 0000:05:00.0: eth2: NIC Copper Link is Up, 1000 Mbps full duplex
bond0: link status definitely up for interface eth2, 1000 Mbps full duplex.
bond0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
gdm-smartcard-w[12271]: segfault at 7fb70caaa2e8 ip 00007fb70caaa2e8 sp 00007fb70c3ffda8 error 4 in locale-archive[7fb70ceea000+5e91000]
cciss 0000:06:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
hpilo 0000:01:04.2: Open could not dequeue a packet
hpilo 0000:01:04.2: Open could not dequeue a packet
hpilo 0000:01:04.2: Open could not dequeue a packet
hpilo 0000:01:04.2: Open could not dequeue a packet
hpilo 0000:01:04.2: Open could not dequeue a packet
INFO: task sendmail:29605 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D 00000000ffffffff 0 29605 29104 0x10000080
ffff8800b3f7bcf8 0000000000000082 ffff8800b3f7bd08 ffffffff811898d5
ffff880110cc8de0 0000000300000001 ffff880110cc8df0 ffff8800a9d5cae0
ffff8800a9d5d098 ffff8800b3f7bfd8 000000000000fb88 ffff8800a9d5d098
Call Trace:
[] ? __link_path_walk+0x155/0x1030
[] ? sync_page+0x0/0x50
[] ? mntput_no_expire+0x30/0x110
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] lock_rename+0xd3/0xe0
[] sys_renameat+0x113/0x260
[] ? ring_buffer_lock_reserve+0xa2/0x160
[] ? ftrace_raw_event_sys_enter+0xd9/0x130
[] ? syscall_trace_enter+0x1d8/0x1e0
[] sys_rename+0x1b/0x20
[] tracesys+0xd9/0xde
INFO: task sendmail:31067 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D ffff8801af824100 0 31067 30507 0x10000080
ffff8800b53cbe48 0000000000000086 0000000000000000 ffff8800b53cbdb0
ffff8800b53cbdb8 ffffffff810137f3 ffff8800b53cbdc8 ffff8801ab85b140
ffff8800b53c9af8 ffff8800b53cbfd8 000000000000fb88 ffff8800b53c9af8
Call Trace:
[] ? native_sched_clock+0x13/0x80
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] vfs_fsync_range+0x90/0xe0
[] vfs_fsync+0x1d/0x20
[] do_fsync+0x3e/0x60
[] sys_fsync+0x10/0x20
[] tracesys+0xd9/0xde
INFO: task sendmail:31104 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D 00000000ffffffff 0 31104 30506 0x10000080
ffff88005c6f3ba8 0000000000000086 ffff8801afa7cd70 000280da00000000
0000000000000282 0000000000000030 ffffffff8100ba4e ffff88005c6f3ba8
ffff88005c65b098 ffff88005c6f3fd8 000000000000fb88 ffff88005c65b098
Call Trace:
[] ? common_interrupt+0xe/0x13
[] ? mutex_spin_on_owner+0x62/0xc0
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] do_lookup+0x11b/0x230
[] __link_path_walk+0x734/0x1030
[] ? security_inode_permission+0x1f/0x30
[] ? pipe_read+0x2d5/0x4e0
[] path_walk+0x6a/0xe0
[] do_path_lookup+0x5b/0xa0
[] user_path_at+0x57/0xa0
[] ? rb_reserve_next_event+0xb4/0x370
[] ? ring_buffer_lock_reserve+0xa2/0x160
[] vfs_fstatat+0x3c/0x80
[] vfs_stat+0x1b/0x20
[] sys_newstat+0x24/0x50
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0x7a/0xde
[] tracesys+0xd9/0xde
INFO: task sendmail:31107 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D 00000000ffffffff 0 31107 30515 0x10000080
ffff88000b9edba8 0000000000000086 ffff8801afa7cd70 000280da00000000
0000000000000282 0000000000000030 0000000000000000 ffff880000020d80
ffff88000b9ebab8 ffff88000b9edfd8 000000000000fb88 ffff88000b9ebab8
Call Trace:
[] ? __alloc_pages_nodemask+0x111/0x940
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] do_lookup+0x11b/0x230
[] __link_path_walk+0x734/0x1030
[] ? security_inode_permission+0x1f/0x30
[] ? pipe_read+0x2d5/0x4e0
[] path_walk+0x6a/0xe0
[] do_path_lookup+0x5b/0xa0
[] user_path_at+0x57/0xa0
[] ? rb_reserve_next_event+0xb4/0x370
[] ? ring_buffer_lock_reserve+0xa2/0x160
[] vfs_fstatat+0x3c/0x80
[] vfs_stat+0x1b/0x20
[] sys_newstat+0x24/0x50
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0x7a/0xde
[] tracesys+0xd9/0xde
INFO: task sendmail:31114 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D 00000000ffffffff 0 31114 30517 0x10000080
ffff8800021ffba8 0000000000000086 ffff8801afa7cd70 000280da00000000
0000000000000282 0000000000000030 0000000000000000 ffff880000020d80
ffff8800021f9098 ffff8800021fffd8 000000000000fb88 ffff8800021f9098
Call Trace:
[] ? __alloc_pages_nodemask+0x111/0x940
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] do_lookup+0x11b/0x230
[] __link_path_walk+0x734/0x1030
[] ? security_inode_permission+0x1f/0x30
[] ? pipe_read+0x2d5/0x4e0
[] path_walk+0x6a/0xe0
[] do_path_lookup+0x5b/0xa0
[] user_path_at+0x57/0xa0
[] ? rb_reserve_next_event+0xb4/0x370
[] ? ring_buffer_lock_reserve+0xa2/0x160
[] vfs_fstatat+0x3c/0x80
[] vfs_stat+0x1b/0x20
[] sys_newstat+0x24/0x50
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0x7a/0xde
[] tracesys+0xd9/0xde
INFO: task sendmail:325 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D 00000000ffffffff 0 325 32290 0x10000080
ffff8800c6895ba8 0000000000000082 ffff8801afa7cd70 000280da00000000
0000000000000282 0000000000000030 0000000000000000 ffff880000020d80
ffff8800652e4638 ffff8800c6895fd8 000000000000fb88 ffff8800652e4638
Call Trace:
[] ? __alloc_pages_nodemask+0x111/0x940
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] do_lookup+0x11b/0x230
[] __link_path_walk+0x734/0x1030
[] ? security_inode_permission+0x1f/0x30
[] ? pipe_read+0x2d5/0x4e0
[] path_walk+0x6a/0xe0
[] do_path_lookup+0x5b/0xa0
[] user_path_at+0x57/0xa0
[] ? rb_reserve_next_event+0xb4/0x370
[] ? ring_buffer_lock_reserve+0xa2/0x160
[] vfs_fstatat+0x3c/0x80
[] vfs_stat+0x1b/0x20
[] sys_newstat+0x24/0x50
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0x7a/0xde
[] tracesys+0xd9/0xde
INFO: task sendmail:328 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D ffff8801af824300 0 328 32291 0x10000080
ffff8800ce083ba8 0000000000000086 0000000000000000 000280da00000000
0000000000000282 0000000000000030 0000000000000000 ffff8800000186c0
ffff8800c4516638 ffff8800ce083fd8 000000000000fb88 ffff8800c4516638
Call Trace:
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] do_lookup+0x11b/0x230
[] __link_path_walk+0x734/0x1030
[] ? security_inode_permission+0x1f/0x30
[] ? pipe_read+0x2d5/0x4e0
[] path_walk+0x6a/0xe0
[] do_path_lookup+0x5b/0xa0
[] user_path_at+0x57/0xa0
[] ? rb_reserve_next_event+0xb4/0x370
[] ? ring_buffer_lock_reserve+0xa2/0x160
[] vfs_fstatat+0x3c/0x80
[] vfs_stat+0x1b/0x20
[] sys_newstat+0x24/0x50
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0x7a/0xde
[] tracesys+0xd9/0xde
INFO: task sendmail:333 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D 00000000ffffffff 0 333 32287 0x10000080
ffff8800b6d85ba8 0000000000000082 ffff8801afa7cd70 000280da00000000
0000000000000282 0000000000000030 0000000000000000 ffff880000020d80
ffff880086e7dab8 ffff8800b6d85fd8 000000000000fb88 ffff880086e7dab8
Call Trace:
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] do_lookup+0x11b/0x230
[] __link_path_walk+0x734/0x1030
[] ? security_inode_permission+0x1f/0x30
[] ? pipe_read+0x2d5/0x4e0
[] path_walk+0x6a/0xe0
[] do_path_lookup+0x5b/0xa0
[] user_path_at+0x57/0xa0
[] ? rb_reserve_next_event+0xb4/0x370
[] ? ring_buffer_lock_reserve+0xa2/0x160
[] vfs_fstatat+0x3c/0x80
[] vfs_stat+0x1b/0x20
[] sys_newstat+0x24/0x50
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0x7a/0xde
[] tracesys+0xd9/0xde
INFO: task sendmail:338 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D 00000000ffffffff 0 338 32297 0x10000080
ffff8800cc3c1ba8 0000000000000086 ffff8801afa7cd70 000280da00000000
0000000000000282 0000000000000030 0000000000000000 ffff880000020d80
ffff880001cb1af8 ffff8800cc3c1fd8 000000000000fb88 ffff880001cb1af8
Call Trace:
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] do_lookup+0x11b/0x230
[] __link_path_walk+0x734/0x1030
[] ? security_inode_permission+0x1f/0x30
[] ? pipe_read+0x2d5/0x4e0
[] path_walk+0x6a/0xe0
[] do_path_lookup+0x5b/0xa0
[] user_path_at+0x57/0xa0
[] ? rb_reserve_next_event+0xb4/0x370
[] ? ring_buffer_lock_reserve+0xa2/0x160
[] vfs_fstatat+0x3c/0x80
[] vfs_stat+0x1b/0x20
[] sys_newstat+0x24/0x50
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0x7a/0xde
[] tracesys+0xd9/0xde
INFO: task sendmail:343 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D 00000000ffffffff 0 343 32295 0x10000080
ffff8800c6811ba8 0000000000000082 ffff8801ab9c18f0 000280da00000000
0000000000000286 0000000000000030 0000000000000000 ffff880000020d80
ffff8800b263d098 ffff8800c6811fd8 000000000000fb88 ffff8800b263d098
Call Trace:
[] __mutex_lock_slowpath+0x13e/0x180
[] mutex_lock+0x2b/0x50
[] do_lookup+0x11b/0x230
[] __link_path_walk+0x734/0x1030
[] ? security_inode_permission+0x1f/0x30
[] ? pipe_read+0x2d5/0x4e0
[] path_walk+0x6a/0xe0
[] do_path_lookup+0x5b/0xa0
[] user_path_at+0x57/0xa0
[] ? rb_reserve_next_event+0xb4/0x370
[] ? ring_buffer_lock_reserve+0xa2/0x160
[] vfs_fstatat+0x3c/0x80
[] vfs_stat+0x1b/0x20
[] sys_newstat+0x24/0x50
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0x7a/0xde
[] tracesys+0xd9/0xde
ssh: page allocation failure. order:1, mode:0x20
Pid: 21538, comm: ssh Tainted: G --------------- T 2.6.32-279.el6.x86_64 #1
Call Trace:
[] ? __alloc_pages_nodemask+0x77f/0x940
[] ? kmem_getpages+0x62/0x170
[] ? fallback_alloc+0x1ba/0x270
[] ? ____cache_alloc_node+0x99/0x160
[] ? kmem_cache_alloc+0x11b/0x190
[] ? sk_prot_alloc+0x48/0x1c0
[] ? sk_clone+0x22/0x2e0
[] ? inet_csk_clone+0x16/0xd0
[] ? tcp_create_openreq_child+0x23/0x450
[] ? tcp_v4_syn_recv_sock+0x4d/0x310
[] ? tcp_check_req+0x226/0x460
[] ? tcp_v4_do_rcv+0x35b/0x430
[] ? tcp_v4_rcv+0x4fe/0x8d0
[] ? ip_local_deliver_finish+0x0/0x2d0
[] ? ip_local_deliver_finish+0xdd/0x2d0
[] ? ip_local_deliver+0x98/0xa0
[] ? ip_rcv_finish+0x12d/0x440
[] ? ip_rcv+0x275/0x350
[] ? __netif_receive_skb+0x49b/0x6f0
[] ? ftrace_raw_event_id_softirq+0xbb/0xd0
[] ? process_backlog+0x9a/0x100
[] ? net_rx_action+0x103/0x2f0
[] ? __do_softirq+0xc1/0x1e0
[] ? call_softirq+0x1c/0x30
[] ? do_softirq+0x65/0xa0
[] ? local_bh_enable_ip+0x9a/0xb0
[] ? _spin_unlock_bh+0x1b/0x20
[] ? release_sock+0xce/0xe0
[] ? inet_stream_connect+0x183/0x2c0
[] ? autoremove_wake_function+0x0/0x40
[] ? sys_connect+0xd7/0xf0
[] ? syscall_trace_enter+0x1d8/0x1e0
[] ? tracesys+0xd9/0xde
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
attempt to access beyond end of device
loop2: rw=0, want=6661528, limit=6245472
Buffer I/O error on device loop2, logical block 1665381
attempt to access beyond end of device
loop2: rw=0, want=6661532, limit=6245472
Buffer I/O error on device loop2, logical block 1665382
attempt to access beyond end of device
loop2: rw=0, want=6661528, limit=6245472
Buffer I/O error on device loop2, logical block 1665381
attempt to access beyond end of device
loop2: rw=0, want=6661532, limit=6245472
Buffer I/O error on device loop2, logical block 1665382
attempt to access beyond end of device
loop2: rw=0, want=6661528, limit=6245472
Buffer I/O error on device loop2, logical block 1665381
attempt to access beyond end of device
loop2: rw=0, want=6661532, limit=6245472
Buffer I/O error on device loop2, logical block 1665382