dmesg - testvm-default1
Linux version 2.6.18-398.el5 (mockbuild@builder17.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-55)) #1 SMP Tue Sep 16 20:50:52 EDT 2014
Command line: ro root=LABEL=/
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000640000000 (usable)
DMI 2.8 present.
DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
kvm-clock: cpu 0, msr 7eff:804ab401, boot clock
ACPI: RSDP (v000 BOCHS ) @ 0x00000000000f0c40
ACPI: RSDT (v001 BOCHS BXPCRSDT 0x00000001 BXPC 0x00000001) @ 0x00000000bffe1cd8
ACPI: FADT (v001 BOCHS BXPCFACP 0x00000001 BXPC 0x00000001) @ 0x00000000bffe0b37
ACPI: SSDT (v001 BOCHS BXPCSSDT 0x00000001 BXPC 0x00000001) @ 0x00000000bffe0bab
ACPI: MADT (v001 BOCHS BXPCAPIC 0x00000001 BXPC 0x00000001) @ 0x00000000bffe1bd0
ACPI: HPET (v001 BOCHS BXPCHPET 0x00000001 BXPC 0x00000001) @ 0x00000000bffe1ca0
ACPI: DSDT (v001 BOCHS BXPCDSDT 0x00000001 BXPC 0x00000001) @ 0x(null)
No NUMA configuration found
Faking a node at 0000000000000000-0000000640000000
Bootmem setup node 0 0000000000000000-0000000640000000
bootmap start 100000 pages 200
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Setting up node 0 0-640000
On node 0 totalpages: 6200182
DMA zone: 2398 pages, LIFO batch:0
DMA32 zone: 768024 pages, LIFO batch:31
Normal zone: 5429760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
Processor #4 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
Processor #5 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
Processor #8 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
Processor #9 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
Processor #10 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
Processor #11 15:6 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Nosave address range: 00000000bffe0000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000feffc000
Nosave address range: 00000000feffc000 - 00000000ff000000
Nosave address range: 00000000ff000000 - 00000000fffc0000
Nosave address range: 00000000fffc0000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:3effc000)
SMP: Allowing 12 CPUs, 0 hotplug CPUs
kvm-clock: cpu 0, msr 0:1003401, primary cpu clock
Built 1 zonelists. Total pages: 6200182
Kernel command line: ro root=LABEL=/
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Using TSC for driving interrupts
Console: colour VGA+ 80x25
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x407f000 - 0x807f000
Memory: 24682140k/26214400k available (2630k kernel code, 483104k reserved, 1679k data, 224k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.84 BogoMIPS (lpj=2533422)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 62.501 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/12 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5164.09 BogoMIPS (lpj=2582049)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Common KVM processor stepping 01
kvm-clock: cpu 1, msr 0:100b981, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 2/12 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 5089.91 BogoMIPS (lpj=2544958)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Common KVM processor stepping 01
kvm-clock: cpu 2, msr 0:1013f01, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 3/12 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 5066.83 BogoMIPS (lpj=2533418)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Common KVM processor stepping 01
kvm-clock: cpu 3, msr 0:101c481, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 4/12 APIC 0x4
Initializing CPU#4
Calibrating delay using timer specific routine.. 5064.01 BogoMIPS (lpj=2532007)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 4
Common KVM processor stepping 01
kvm-clock: cpu 4, msr 0:1024a01, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 5/12 APIC 0x5
Initializing CPU#5
Calibrating delay using timer specific routine.. 5066.71 BogoMIPS (lpj=2533357)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 5
Common KVM processor stepping 01
kvm-clock: cpu 5, msr 0:102cf81, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 6/12 APIC 0x6
Initializing CPU#6
Calibrating delay using timer specific routine.. 5043.17 BogoMIPS (lpj=2521586)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 6
Common KVM processor stepping 01
kvm-clock: cpu 6, msr 0:1035501, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 7/12 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 5068.28 BogoMIPS (lpj=2534142)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 7
Common KVM processor stepping 01
kvm-clock: cpu 7, msr 0:103da81, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 8/12 APIC 0x8
Initializing CPU#8
Calibrating delay using timer specific routine.. 5099.88 BogoMIPS (lpj=2549940)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 8
Common KVM processor stepping 01
kvm-clock: cpu 8, msr 0:1046001, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 9/12 APIC 0x9
Initializing CPU#9
Calibrating delay using timer specific routine.. 5066.04 BogoMIPS (lpj=2533021)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
Common KVM processor stepping 01
kvm-clock: cpu 9, msr 0:104e581, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 10/12 APIC 0xa
Initializing CPU#10
Calibrating delay using timer specific routine.. 5066.65 BogoMIPS (lpj=2533326)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 10
Common KVM processor stepping 01
kvm-clock: cpu 10, msr 0:1056b01, secondary cpu clock
SMP alternatives: switching to SMP code
Booting processor 11/12 APIC 0xb
Initializing CPU#11
Calibrating delay using timer specific routine.. 5073.22 BogoMIPS (lpj=2536612)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 11
Common KVM processor stepping 01
kvm-clock: cpu 11, msr 0:105f081, secondary cpu clock
Brought up 12 CPUs
time.c: Using 100.000000 MHz WALL KVM GTOD KVM timer.
time.c: Detected 2533.422 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=3413
checking if image is initramfs... it is
Freeing initrd memory: 2663k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20: [io 0xc0a0-0xc0af]
pci 0000:00:01.2: reg 20: [io 0xc040-0xc05f]
PCI quirk: region 0600-063f claimed by PIIX4 ACPI
PCI quirk: region 0700-070f claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
pci 0000:00:02.0: reg 30: [mem 0xfebd0000-0xfebdffff pref]
pci 0000:00:03.0: reg 10: [io 0xc060-0xc07f]
pci 0000:00:0a.0: reg 10: [io 0xc000-0xc03f]
pci 0000:00:0a.0: reg 14: [mem 0xfebf1000-0xfebf1fff]
pci 0000:00:12.0: reg 10: [io 0xc080-0xc09f]
pci 0000:00:12.0: reg 14: [mem 0xfebf2000-0xfebf2fff]
pci 0000:00:12.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
host bridge window [io 0x0000-0x0cf7] (ignored)
host bridge window [io 0x0d00-0xadff] (ignored)
host bridge window [io 0xae0f-0xaeff] (ignored)
host bridge window [io 0xaf20-0xafdf] (ignored)
host bridge window [io 0xafe4-0xffff] (ignored)
host bridge window [mem 0x000a0000-0x000bffff] (ignored)
host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 7 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 100000000 Hz
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1416415443.094:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 414F5232C2A139E0
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
Activating ISA DMA hang workarounds.
Boot video device is 0000:00:02.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:01.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
pci 0000:00:01.1: setting latency timer to 64
ide0: BM-DMA at 0xc0a0-0xc0a7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xc0a8-0xc0af, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
input: AT Translated Set 2 keyboard as /class/input/input0
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 533k
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, high) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 10 (level, high) -> IRQ 10
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 10 (level, high) -> IRQ 10
vda: vda1
SCSI subsystem initialized
libata version 3.00 loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
usb 1-1: new full speed USB device using uhci_hcd and address 2
device-mapper: dm-raid45: initialized v0.2594l
usb 1-1: configuration #1 chosen from 1 choice
input: QEMU QEMU USB Tablet as /class/input/input2
input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1416415466.326:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
security: 3 users, 6 roles, 2076 types, 282 bools, 1 sens, 1024 cats
security: 61 classes, 83798 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev vda1, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1416415466.392:3): policy loaded auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input3
hdc: ATAPI 4X DVD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
piix4_smbus 0000:00:01.3: Found 0000:00:01.3 device
FDC 0 is a S82078B
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
EXT3 FS on vda1, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
Loading iSCSI transport class v2.0-871.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
eth0: no IPv6 routers present