dmesg - nr6-linux
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-39-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC 2014 (Ubuntu 3.13.0-39.66-generic 3.13.11.8)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-39-generic root=/dev/mapper/kubuntu--vg-root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf75ffff] usable
BIOS-e820: [mem 0x00000000bf760000-0x00000000bf76dfff] ACPI data
BIOS-e820: [mem 0x00000000bf76e000-0x00000000bf7a7fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7a8000-0x00000000bf7dffff] reserved
BIOS-e820: [mem 0x00000000bf7eb800-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Acer Aspire G7710/Aspire G7710, BIOS R01-A4 04/22/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BF800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3064MB, range: 8MB, type UC
total RAM covered: 8184M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 1GB, type WB
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf760 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[mem 0x23fe00000-0x23fffffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[mem 0x23c000000-0x23fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf75ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf75ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
RAMDISK: [mem 0x34aec000-0x3656dfff]
ACPI: RSDP 00000000000fa4b0 000014 (v00 ACPIAM)
ACPI: RSDT 00000000bf760000 00004C (v01 ACRSYS ACRPRDCT 20090422 MSFT 00000097)
ACPI: FACP 00000000bf760200 000084 (v01 ACER58 ACRPRDCT 20090422 MSFT 00000097)
ACPI: DSDT 00000000bf7605e0 00619B (v01 A7570 A7570005 00000005 INTL 20051117)
ACPI: FACS 00000000bf76e000 000040
ACPI: APIC 00000000bf760390 00008C (v01 ACER58 ACRPRDCT 20090422 MSFT 00000097)
ACPI: MCFG 00000000bf760420 00003C (v01 ACER58 ACRPRDCT 20090422 MSFT 00000097)
ACPI: SLIC 00000000bf760460 000176 (v01 ACRSYS ACRPRDCT 20090422 MSFT 00000097)
ACPI: OEMB 00000000bf76e040 000071 (v01 ACER58 ACRPRDCT 20090422 MSFT 00000097)
ACPI: HPET 00000000bf766780 000038 (v01 ACER58 ACRPRDCT 20090422 MSFT 00000097)
ACPI: AWMI 00000000bf76e0c0 00004E (v01 ACER58 ACRPRDCT 20090422 MSFT 00000097)
ACPI: ASPT 00000000bf767810 000034 (v04 ACER58 PerfTune 20090422 MSFT 00000097)
ACPI: WDTT 00000000bf767850 000104 (v02 ACER58 OEMWDTT 20090422 MSFT 00000097)
ACPI: SSDT 00000000bf770940 001298 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x00000000-0x23fffffff]
NODE_DATA [mem 0x23fff6000-0x23fffafff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbf75ffff]
node 0: [mem 0x100000000-0x23fffffff]
On node 0 totalpages: 2094845
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12190 pages used for memmap
DMA32 zone: 780128 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf760000-0xbf76dfff]
PM: Registered nosave memory: [mem 0xbf76e000-0xbf7a7fff]
PM: Registered nosave memory: [mem 0xbf7a8000-0xbf7dffff]
PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]
PM: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88023fc00000 s86400 r8192 d24192 u262144
pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062090
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-39-generic root=/dev/mapper/kubuntu--vg-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8137528K/8379380K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 241852K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2673.336 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5346.67 BogoMIPS (lpj=10693344)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (fam: 06, model: 1a, stepping: 04)
APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
APIC delta adjusted to PM-Timer: 835403 (1002475)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (42773.37 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf76e000-0xbf7a7fff] (237568 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 8:50:30, date: 11/01/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf76e110 000403 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000403 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bf770190 0003B2 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003B2 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bf76e520 000403 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000403 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
ACPI: SSDT 00000000bf770550 000085 (v01 PmRef P002Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000085 (v01 PmRef P002Cst 00003000 INTL 20051117)
ACPI: SSDT 00000000bf76e930 000403 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000403 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
ACPI: SSDT 00000000bf7705e0 000085 (v01 PmRef P003Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000085 (v01 PmRef P003Cst 00003000 INTL 20051117)
ACPI: SSDT 00000000bf76ed40 000403 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000403 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
ACPI: SSDT 00000000bf770670 000085 (v01 PmRef P004Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000085 (v01 PmRef P004Cst 00003000 INTL 20051117)
ACPI: SSDT 00000000bf76f150 000403 (v01 DpgPmm P005Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000403 (v01 DpgPmm P005Ist 00000012 INTL 20051117)
ACPI: SSDT 00000000bf770700 000085 (v01 PmRef P005Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000085 (v01 PmRef P005Cst 00003000 INTL 20051117)
ACPI: SSDT 00000000bf76f560 000403 (v01 DpgPmm P006Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000403 (v01 DpgPmm P006Ist 00000012 INTL 20051117)
ACPI: SSDT 00000000bf770790 000085 (v01 PmRef P006Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000085 (v01 PmRef P006Cst 00003000 INTL 20051117)
ACPI: SSDT 00000000bf76f970 000403 (v01 DpgPmm P007Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000403 (v01 DpgPmm P007Ist 00000012 INTL 20051117)
ACPI: SSDT 00000000bf770820 000085 (v01 PmRef P007Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000085 (v01 PmRef P007Cst 00003000 INTL 20051117)
ACPI: SSDT 00000000bf76fd80 000403 (v01 DpgPmm P008Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000403 (v01 DpgPmm P008Ist 00000012 INTL 20051117)
ACPI: SSDT 00000000bf7708b0 000085 (v01 PmRef P008Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000085 (v01 PmRef P008Cst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x8400-0x841f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x8480-0x849f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x8800-0x881f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf7200000-0xf72003ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf79f8000-0xf79fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x8880-0x889f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x8c00-0x8c1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x9000-0x901f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf7400000-0xf74003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x9880-0x9887]
pci 0000:00:1f.2: reg 0x14: [io 0x9800-0x9803]
pci 0000:00:1f.2: reg 0x18: [io 0x9480-0x9487]
pci 0000:00:1f.2: reg 0x1c: [io 0x9400-0x9403]
pci 0000:00:1f.2: reg 0x20: [io 0x9080-0x909f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7600000-0xf76007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf79ffc00-0xf79ffcff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: [10de:05e2] type 00 class 0x030000
pci 0000:09:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:09:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:09:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:09:00.0: reg 0x24: [io 0xec00-0xec7f]
pci 0000:09:00.0: reg 0x30: [mem 0xfaf80000-0xfaffffff pref]
pci 0000:00:03.0: PCI bridge to [bus 09]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 08]
pci 0000:00:09.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd800-0xd8ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf7fff000-0xf7ffffff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xcfff0000-0xcfffffff 64bit pref]
pci 0000:05:00.0: reg 0x30: [mem 0xf7fc0000-0xf7fdffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:04:00.0: [197b:2363] type 00 class 0x010185
pci 0000:04:00.0: reg 0x24: [mem 0xf7c00000-0xf7c01fff]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
pci 0000:04:00.1: reg 0x10: [io 0xcc00-0xcc07]
pci 0000:04:00.1: reg 0x14: [io 0xc880-0xc883]
pci 0000:04:00.1: reg 0x18: [io 0xc800-0xc807]
pci 0000:04:00.1: reg 0x1c: [io 0xc480-0xc483]
pci 0000:04:00.1: reg 0x20: [io 0xc400-0xc40f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7dfffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xb800-0xb8ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7bff000-0xf7bfffff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xcfef0000-0xcfefffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0xf7bc0000-0xf7bdffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.4: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
pci 0000:02:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:02:00.0: reg 0x10: [mem 0xf7aff800-0xf7afffff 64bit]
pci 0000:02:00.0: reg 0x18: [io 0xa800-0xa8ff]
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:09:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf760000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0a00-0x0adf] has been reserved
system 00:05: [io 0x0ae0-0x0aef] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] could not be reserved
system 00:06: [io 0x0500-0x057f] could not be reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0a: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 0a]
pci 0000:00:03.0: PCI bridge to [bus 09]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 08]
pci 0000:00:09.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7dfffff]
pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.4: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
pci_bus 0000:09: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:09: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:06: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:05: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7dfffff]
pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:03: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:02: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:09:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27144K (ffff880034aec000 - ffff88003656e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb760000-0xbf760000] (64MB) mapped at [ffff8800bb760000-ffff8800bf75ffff]
microcode: CPU0 sig=0x106a4, pf=0x2, revision=0xa
microcode: CPU1 sig=0x106a4, pf=0x2, revision=0xa
microcode: CPU2 sig=0x106a4, pf=0x2, revision=0xa
microcode: CPU3 sig=0x106a4, pf=0x2, revision=0xa
microcode: CPU4 sig=0x106a4, pf=0x2, revision=0xa
microcode: CPU5 sig=0x106a4, pf=0x2, revision=0xa
microcode: CPU6 sig=0x106a4, pf=0x2, revision=0xa
microcode: CPU7 sig=0x106a4, pf=0x2, revision=0xa
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1414831829.712:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15946
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7200000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7400000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-39-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-39-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-39-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-39-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008c00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-39-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-39-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: e3c165d0891e3ceeb6dd5c18c7e1993cd24956b0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:738:825
rtc_cmos 00:02: setting system clock to 2014-11-01 08:50:30 UTC (1414831830)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[148]: starting version 204
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi0 : pata_jmicron
r8169 0000:05:00.0: irq 45 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168c/8111c at 0xffffc90000c5e000, 00:24:21:17:ba:0d, XID 1c4000c0 IRQ 45
r8169 0000:05:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 46 for MSI/MSI-X
r8169 0000:03:00.0 eth1: RTL8168c/8111c at 0xffffc90000c7c000, 00:24:21:17:ba:0c, XID 1c4000c0 IRQ 46
r8169 0000:03:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16
ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf7600000 port 0xf7600100 irq 47
ata4: SATA max UDMA/133 abar m2048@0xf7600000 port 0xf7600180 irq 47
ata5: SATA max UDMA/133 abar m2048@0xf7600000 port 0xf7600200 irq 47
ata6: SATA max UDMA/133 abar m2048@0xf7600000 port 0xf7600280 irq 47
ata7: SATA max UDMA/133 abar m2048@0xf7600000 port 0xf7600300 irq 47
ata8: SATA max UDMA/133 abar m2048@0xf7600000 port 0xf7600380 irq 47
firewire_ohci 0000:02:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xf7c00000 port 0xf7c00100 irq 19
ata10: SATA max UDMA/133 abar m8192@0xf7c00000 port 0xf7c00180 irq 19
usb 1-5: new high-speed USB device number 2 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
firewire_core 0000:02:00.0: created device fw0: GUID 0010dc0001785938, S400
ata4: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 2673.299 MHz
usb 1-5: New USB device found, idVendor=0bda, idProduct=0151
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB2.0-CRW
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 20060413092100000
usb-storage 1-5:1.0: USB Mass Storage device detected
scsi10 : usb-storage 1-5:1.0
usbcore: registered new interface driver usb-storage
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
ata5.00: 490234752 sectors, multi 0: LBA48 NCQ (not used)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 4:0:0:0: [sda] Attached SCSI disk
random: lvm urandom read with 30 bits of entropy available
bio: create slab at 1
ata6: SATA link down (SStatus 0 SControl 300)
usb 6-1: new full-speed USB device number 2 using uhci_hcd
usb 6-1: New USB device found, idVendor=046d, idProduct=c52e
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Receiver
usb 6-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input5
hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input6
hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATAPI: HL-DT-STDVD-ROM DH10N, 0A01, max UDMA/100
ata7.00: configured for UDMA/100
scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-ROM DH10N 0A01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg1 type 5
Switched to clocksource tsc
scsi 10:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 10:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 10:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:1: Attached scsi generic sg3 type 0
sd 10:0:0:2: Attached scsi generic sg4 type 0
sd 10:0:0:3: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdb] Attached SCSI removable disk
sd 10:0:0:1: [sdc] Attached SCSI removable disk
sd 10:0:0:2: [sdd] Attached SCSI removable disk
sd 10:0:0:3: [sde] Attached SCSI removable disk
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
ata8.00: configured for UDMA/100
scsi 7:0:0:0: CD-ROM HL-DT-ST DVDRAM GH40F MG01 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
sr 7:0:0:0: Attached scsi CD-ROM sr1
sr 7:0:0:0: Attached scsi generic sg6 type 5
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Adding 8376316k swap on /dev/mapper/kubuntu--vg-swap_1. Priority:-1 extents:1 across:8376316k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[418]: starting version 204
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
lp: driver loaded but no devices found
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
wmi: Mapper loaded
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
input: PC Speaker as /devices/platform/pcspkr/input/input7
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
[drm] Initialized drm 1.1.0 20060810
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
gpio_ich: GPIO from 195 to 255 on gpio_ich
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
hda_codec: ALC888: SKU not ready 0x411111f0
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
type=1400 audit(1414828244.583:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=573 comm="apparmor_parser"
type=1400 audit(1414828244.583:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser"
type=1400 audit(1414828244.583:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser"
type=1400 audit(1414828244.583:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=572 comm="apparmor_parser"
type=1400 audit(1414828244.583:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=572 comm="apparmor_parser"
type=1400 audit(1414828244.583:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=572 comm="apparmor_parser"
type=1400 audit(1414828244.583:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=571 comm="apparmor_parser"
type=1400 audit(1414828244.583:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=571 comm="apparmor_parser"
type=1400 audit(1414828244.583:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=571 comm="apparmor_parser"
type=1400 audit(1414828244.583:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (743) killed by HUP signal
init: cups main process ended, respawning
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
init: failsafe main process (680) killed by TERM signal
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:09:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:09:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
audit_printk_skb: 132 callbacks suppressed
type=1400 audit(1414828250.847:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1102 comm="apparmor_parser"
type=1400 audit(1414828251.443:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/mysqld" pid=1199 comm="apparmor_parser"
r8169 0000:05:00.0 eth0: link down
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: samba-ad-dc main process (1273) terminated with status 1
init: nvidia-persistenced main process (1488) terminated with status 1
nvidia 0000:09:00.0: irq 49 for MSI/MSI-X
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1935) terminated with status 1
type=1400 audit(1414828278.060:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1995 comm="apparmor_parser"
type=1400 audit(1414828278.060:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1995 comm="apparmor_parser"
type=1400 audit(1414828278.060:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1995 comm="apparmor_parser"
init: anacron main process (1087) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 4:0:0:0: [sda] Synchronizing SCSI cache
sd 4:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 194.831 msecs
PM: late suspend of devices complete after 0.106 msecs
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 64.007 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
Broke affinity for irq 47
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
Broke affinity for irq 18
Broke affinity for irq 23
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 430683413 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
Switched to clocksource hpet
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 191.931 msecs
PM: early resume of devices complete after 0.095 msecs
usb usb4: root hub lost power or was reset
pcieport 0000:00:1c.2: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
usb usb5: root hub lost power or was reset
usb usb3: root hub lost power or was reset
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
usb usb8: root hub lost power or was reset
r8169 0000:05:00.0 eth0: link down
r8169 0000:03:00.0 eth1: link down
usb 6-1: reset full-speed USB device number 2 using uhci_hcd
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: configured for UDMA/100
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: configured for UDMA/100
firewire_core 0000:02:00.0: rediscovered device fw0
r8169 0000:05:00.0 eth0: link up
ata5: link is slow to respond, please be patient (ready=0)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7456.346 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 4:0:0:0: [sda] Synchronizing SCSI cache
sd 4:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 155.911 msecs
PM: late suspend of devices complete after 0.143 msecs
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 64.108 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
Broke affinity for irq 17
Broke affinity for irq 23
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 188.956 msecs
PM: early resume of devices complete after 0.094 msecs
pcieport 0000:00:1c.2: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
usb usb5: root hub lost power or was reset
usb usb4: root hub lost power or was reset
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
usb usb7: root hub lost power or was reset
usb usb6: root hub lost power or was reset
usb usb8: root hub lost power or was reset
r8169 0000:05:00.0 eth0: link down
r8169 0000:03:00.0 eth1: link down
usb 6-1: reset full-speed USB device number 2 using uhci_hcd
ata10: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7.00: configured for UDMA/100
ata8.00: configured for UDMA/100
firewire_core 0000:02:00.0: rediscovered device fw0
r8169 0000:05:00.0 eth0: link up
ata5: link is slow to respond, please be patient (ready=0)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7459.931 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 4:0:0:0: [sda] Synchronizing SCSI cache
sd 4:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 163.435 msecs
PM: late suspend of devices complete after 0.111 msecs
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 64.026 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 189.442 msecs
PM: early resume of devices complete after 0.094 msecs
pcieport 0000:00:1c.2: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
usb usb8: root hub lost power or was reset
r8169 0000:05:00.0 eth0: link down
r8169 0000:03:00.0 eth1: link down
usb 6-1: reset full-speed USB device number 2 using uhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
ata8.00: configured for UDMA/100
firewire_core 0000:02:00.0: rediscovered device fw0
r8169 0000:05:00.0 eth0: link up
ata5: link is slow to respond, please be patient (ready=0)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7624.259 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
ata6: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
ata6: irq_stat 0x00400040, connection status changed
ata6: SError: { PHYRdyChg CommWake DevExch }
ata6: hard resetting link
ata4: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
ata4: irq_stat 0x00000040, connection status changed
ata4: SError: { PHYRdyChg CommWake DevExch }
ata4: hard resetting link
ata3: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
ata3: irq_stat 0x00400040, connection status changed
ata3: SError: { PHYRdyChg CommWake DevExch }
ata3: hard resetting link
ata6: link is slow to respond, please be patient (ready=0)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: ST31000528AS, CC44, max UDMA/133
ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
ata6: EH complete
scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC44 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: Attached scsi generic sg7 type 0
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: unknown partition table
sd 5:0:0:0: [sdf] Attached SCSI disk
ata4: link is slow to respond, please be patient (ready=0)
ata3: link is slow to respond, please be patient (ready=0)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata4: EH complete
scsi 3:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg8 type 0
sd 3:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdg] 4096-byte physical blocks
sd 3:0:0:0: [sdg] Write Protect is off
sd 3:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1
sd 3:0:0:0: [sdg] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata3: EH complete
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg9 type 0
sd 2:0:0:0: [sdh] Write Protect is off
sd 2:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdh: sdh1
sd 2:0:0:0: [sdh] Attached SCSI disk
EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdh] Synchronizing SCSI cache
sd 3:0:0:0: [sdg] Synchronizing SCSI cache
sd 5:0:0:0: [sdf] Synchronizing SCSI cache
sd 2:0:0:0: [sdh] Stopping disk
sd 4:0:0:0: [sda] Synchronizing SCSI cache
sd 5:0:0:0: [sdf] Stopping disk
sd 4:0:0:0: [sda] Stopping disk
sd 3:0:0:0: [sdg] Stopping disk
PM: suspend of devices complete after 1056.803 msecs
PM: late suspend of devices complete after 0.168 msecs
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 64.091 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
Broke affinity for irq 18
Broke affinity for irq 23
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 189.069 msecs
PM: early resume of devices complete after 0.100 msecs
pcieport 0000:00:1c.2: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb5: root hub lost power or was reset
usb usb4: root hub lost power or was reset
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
usb usb8: root hub lost power or was reset
r8169 0000:05:00.0 eth0: link down
r8169 0000:03:00.0 eth1: link down
usb 6-1: reset full-speed USB device number 2 using uhci_hcd
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: configured for UDMA/100
ata8.00: configured for UDMA/100
firewire_core 0000:02:00.0: rediscovered device fw0
r8169 0000:05:00.0 eth0: link up
ata5: link is slow to respond, please be patient (ready=0)
ata6: link is slow to respond, please be patient (ready=0)
ata3: link is slow to respond, please be patient (ready=0)
ata4: link is slow to respond, please be patient (ready=0)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
sd 5:0:0:0: [sdf] Starting disk
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sda] Starting disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sdh] Starting disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
sd 3:0:0:0: [sdg] Starting disk
PM: resume of devices complete after 7909.655 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
ata6: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen
ata6: irq_stat 0x00400040, connection status changed
ata6: SError: { PHYRdyChg 10B8B DevExch }
ata6: hard resetting link
ata6: SATA link down (SStatus 0 SControl 300)
ata6: hard resetting link
ata6: SATA link down (SStatus 0 SControl 300)
ata6: limiting SATA link speed to 1.5 Gbps
ata6: hard resetting link
ata6: SATA link down (SStatus 0 SControl 310)
ata6.00: disabled
ata6: EH complete
ata6.00: detaching (SCSI 5:0:0:0)
sd 5:0:0:0: [sdf] Synchronizing SCSI cache
sd 5:0:0:0: [sdf]
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 5:0:0:0: [sdf] Stopping disk
sd 5:0:0:0: [sdf] START_STOP FAILED
sd 5:0:0:0: [sdf]
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdh] Synchronizing SCSI cache
sd 3:0:0:0: [sdg] Synchronizing SCSI cache
sd 2:0:0:0: [sdh] Stopping disk
sd 3:0:0:0: [sdg] Stopping disk
sd 4:0:0:0: [sda] Synchronizing SCSI cache
sd 4:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1022.805 msecs
PM: late suspend of devices complete after 0.112 msecs
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 64.087 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
Broke affinity for irq 18
Broke affinity for irq 47
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
Broke affinity for irq 17
Broke affinity for irq 23
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 189.424 msecs
PM: early resume of devices complete after 0.098 msecs
pcieport 0000:00:1c.2: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
usb usb8: root hub lost power or was reset
r8169 0000:03:00.0 eth1: link down
r8169 0000:05:00.0 eth0: link down
usb 6-1: reset full-speed USB device number 2 using uhci_hcd
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: configured for UDMA/100
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: configured for UDMA/100
firewire_core 0000:02:00.0: rediscovered device fw0
r8169 0000:05:00.0 eth0: link up
ata3: link is slow to respond, please be patient (ready=0)
ata4: link is slow to respond, please be patient (ready=0)
ata5: link is slow to respond, please be patient (ready=0)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sda] Starting disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sdh] Starting disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
sd 3:0:0:0: [sdg] Starting disk
PM: resume of devices complete after 8172.213 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
type=1400 audit(1414916376.584:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5818 comm="apparmor_parser"
type=1400 audit(1414916376.584:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5818 comm="apparmor_parser"
type=1400 audit(1414916376.584:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5818 comm="apparmor_parser"