dmesg - k55vd

Return To k55vd System Information

CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000c90dbfff] usable
BIOS-e820: [mem 0x00000000c90dc000-0x00000000c911efff] ACPI NVS
BIOS-e820: [mem 0x00000000c911f000-0x00000000c9528fff] usable
BIOS-e820: [mem 0x00000000c9529000-0x00000000c97fafff] reserved
BIOS-e820: [mem 0x00000000c97fb000-0x00000000c9f02fff] usable
BIOS-e820: [mem 0x00000000c9f03000-0x00000000ca503fff] ACPI NVS
BIOS-e820: [mem 0x00000000ca504000-0x00000000ca506fff] type 20
BIOS-e820: [mem 0x00000000ca507000-0x00000000ca526fff] usable
BIOS-e820: [mem 0x00000000ca527000-0x00000000ca52cfff] type 20
BIOS-e820: [mem 0x00000000ca52d000-0x00000000ca52efff] usable
BIOS-e820: [mem 0x00000000ca52f000-0x00000000ca53cfff] type 20
BIOS-e820: [mem 0x00000000ca53d000-0x00000000ca68efff] usable
BIOS-e820: [mem 0x00000000ca68f000-0x00000000ca692fff] type 20
BIOS-e820: [mem 0x00000000ca693000-0x00000000ca6d6fff] usable
BIOS-e820: [mem 0x00000000ca6d7000-0x00000000ca6d8fff] type 20
BIOS-e820: [mem 0x00000000ca6d9000-0x00000000ca6e5fff] reserved
BIOS-e820: [mem 0x00000000ca6e6000-0x00000000ca6f6fff] type 20
BIOS-e820: [mem 0x00000000ca6f7000-0x00000000ca6fefff] usable
BIOS-e820: [mem 0x00000000ca6ff000-0x00000000ca700fff] type 20
BIOS-e820: [mem 0x00000000ca701000-0x00000000ca717fff] usable
BIOS-e820: [mem 0x00000000ca718000-0x00000000ca71dfff] type 20
BIOS-e820: [mem 0x00000000ca71e000-0x00000000ca72ffff] usable
BIOS-e820: [mem 0x00000000ca730000-0x00000000ca730fff] type 20
BIOS-e820: [mem 0x00000000ca731000-0x00000000ca73efff] usable
BIOS-e820: [mem 0x00000000ca73f000-0x00000000ca743fff] type 20
BIOS-e820: [mem 0x00000000ca744000-0x00000000ca76cfff] usable
BIOS-e820: [mem 0x00000000ca76d000-0x00000000ca76dfff] type 20
BIOS-e820: [mem 0x00000000ca76e000-0x00000000ca780fff] usable
BIOS-e820: [mem 0x00000000ca781000-0x00000000ca7a5fff] type 20
BIOS-e820: [mem 0x00000000ca7a6000-0x00000000ca7b6fff] usable
BIOS-e820: [mem 0x00000000ca7b7000-0x00000000ca7b7fff] type 20
BIOS-e820: [mem 0x00000000ca7b8000-0x00000000ca7b8fff] usable
BIOS-e820: [mem 0x00000000ca7b9000-0x00000000ca7bafff] type 20
BIOS-e820: [mem 0x00000000ca7bb000-0x00000000ca7bbfff] usable
BIOS-e820: [mem 0x00000000ca7bc000-0x00000000ca7c0fff] type 20
BIOS-e820: [mem 0x00000000ca7c1000-0x00000000ca7d6fff] usable
BIOS-e820: [mem 0x00000000ca7d7000-0x00000000ca836fff] reserved
BIOS-e820: [mem 0x00000000ca837000-0x00000000ca84ffff] type 20
BIOS-e820: [mem 0x00000000ca850000-0x00000000cad79fff] reserved
BIOS-e820: [mem 0x00000000cad7a000-0x00000000caff9fff] ACPI NVS
BIOS-e820: [mem 0x00000000caffa000-0x00000000caffefff] ACPI data
BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022f1fffff] usable
debug: ignoring loglevel setting.
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI=0xcafcd000  ACPI 2.0=0xcafcd000  SMBIOS=0xf04c0  MPS=0xfd4c0 
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000058000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
efi: mem03: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
efi: mem04: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
efi: mem05: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem06: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002053000) (16MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000002053000-0x0000000020000000) (479MB)
efi: mem10: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000020200000-0x000000003775c000) (373MB)
efi: mem12: type=2, attr=0xf, range=[0x000000003775c000-0x0000000037ba6000) (4MB)
efi: mem13: type=7, attr=0xf, range=[0x0000000037ba6000-0x0000000040004000) (132MB)
efi: mem14: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
efi: mem15: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ecb9000) (1260MB)
efi: mem16: type=2, attr=0xf, range=[0x000000008ecb9000-0x00000000be7ab000) (762MB)
efi: mem17: type=1, attr=0xf, range=[0x00000000be7ab000-0x00000000be7c8000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000be7c8000-0x00000000be7e5000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000be7e5000-0x00000000be822000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x00000000be822000-0x00000000be82a000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x00000000be82a000-0x00000000be9d9000) (1MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000be9d9000-0x00000000be9db000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x00000000be9db000-0x00000000be9ee000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000be9ee000-0x00000000be9f2000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x00000000be9f2000-0x00000000bea95000) (0MB)
efi: mem26: type=7, attr=0xf, range=[0x00000000bea95000-0x00000000bebbb000) (1MB)
efi: mem27: type=4, attr=0xf, range=[0x00000000bebbb000-0x00000000bebbf000) (0MB)
efi: mem28: type=7, attr=0xf, range=[0x00000000bebbf000-0x00000000bebc1000) (0MB)
efi: mem29: type=4, attr=0xf, range=[0x00000000bebc1000-0x00000000c8648000) (154MB)
efi: mem30: type=7, attr=0xf, range=[0x00000000c8648000-0x00000000c864a000) (0MB)
efi: mem31: type=4, attr=0xf, range=[0x00000000c864a000-0x00000000c8651000) (0MB)
efi: mem32: type=7, attr=0xf, range=[0x00000000c8651000-0x00000000c8652000) (0MB)
efi: mem33: type=4, attr=0xf, range=[0x00000000c8652000-0x00000000c8653000) (0MB)
efi: mem34: type=7, attr=0xf, range=[0x00000000c8653000-0x00000000c8654000) (0MB)
efi: mem35: type=4, attr=0xf, range=[0x00000000c8654000-0x00000000c90dc000) (10MB)
efi: mem36: type=10, attr=0xf, range=[0x00000000c90dc000-0x00000000c911f000) (0MB)
efi: mem37: type=4, attr=0xf, range=[0x00000000c911f000-0x00000000c9269000) (1MB)
efi: mem38: type=3, attr=0xf, range=[0x00000000c9269000-0x00000000c94fd000) (2MB)
efi: mem39: type=4, attr=0xf, range=[0x00000000c94fd000-0x00000000c950d000) (0MB)
efi: mem40: type=3, attr=0xf, range=[0x00000000c950d000-0x00000000c951f000) (0MB)
efi: mem41: type=4, attr=0xf, range=[0x00000000c951f000-0x00000000c9520000) (0MB)
efi: mem42: type=3, attr=0xf, range=[0x00000000c9520000-0x00000000c9522000) (0MB)
efi: mem43: type=4, attr=0xf, range=[0x00000000c9522000-0x00000000c9529000) (0MB)
efi: mem44: type=6, attr=0x800000000000000f, range=[0x00000000c9529000-0x00000000c97fb000) (2MB)
efi: mem45: type=4, attr=0xf, range=[0x00000000c97fb000-0x00000000c9816000) (0MB)
efi: mem46: type=7, attr=0xf, range=[0x00000000c9816000-0x00000000c9eda000) (6MB)
efi: mem47: type=2, attr=0xf, range=[0x00000000c9eda000-0x00000000c9ee6000) (0MB)
efi: mem48: type=3, attr=0xf, range=[0x00000000c9ee6000-0x00000000c9f03000) (0MB)
efi: mem49: type=10, attr=0xf, range=[0x00000000c9f03000-0x00000000ca504000) (6MB)
efi: mem50: type=5, attr=0x800000000000000f, range=[0x00000000ca504000-0x00000000ca507000) (0MB)
efi: mem51: type=3, attr=0xf, range=[0x00000000ca507000-0x00000000ca527000) (0MB)
efi: mem52: type=5, attr=0x800000000000000f, range=[0x00000000ca527000-0x00000000ca52d000) (0MB)
efi: mem53: type=3, attr=0xf, range=[0x00000000ca52d000-0x00000000ca52f000) (0MB)
efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000ca52f000-0x00000000ca53d000) (0MB)
efi: mem55: type=3, attr=0xf, range=[0x00000000ca53d000-0x00000000ca68f000) (1MB)
efi: mem56: type=5, attr=0x800000000000000f, range=[0x00000000ca68f000-0x00000000ca693000) (0MB)
efi: mem57: type=3, attr=0xf, range=[0x00000000ca693000-0x00000000ca6d7000) (0MB)
efi: mem58: type=5, attr=0x800000000000000f, range=[0x00000000ca6d7000-0x00000000ca6d9000) (0MB)
efi: mem59: type=6, attr=0x800000000000000f, range=[0x00000000ca6d9000-0x00000000ca6e6000) (0MB)
efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000ca6e6000-0x00000000ca6f7000) (0MB)
efi: mem61: type=3, attr=0xf, range=[0x00000000ca6f7000-0x00000000ca6ff000) (0MB)
efi: mem62: type=5, attr=0x800000000000000f, range=[0x00000000ca6ff000-0x00000000ca701000) (0MB)
efi: mem63: type=3, attr=0xf, range=[0x00000000ca701000-0x00000000ca718000) (0MB)
efi: mem64: type=5, attr=0x800000000000000f, range=[0x00000000ca718000-0x00000000ca71e000) (0MB)
efi: mem65: type=3, attr=0xf, range=[0x00000000ca71e000-0x00000000ca730000) (0MB)
efi: mem66: type=5, attr=0x800000000000000f, range=[0x00000000ca730000-0x00000000ca731000) (0MB)
efi: mem67: type=3, attr=0xf, range=[0x00000000ca731000-0x00000000ca73f000) (0MB)
efi: mem68: type=5, attr=0x800000000000000f, range=[0x00000000ca73f000-0x00000000ca744000) (0MB)
efi: mem69: type=3, attr=0xf, range=[0x00000000ca744000-0x00000000ca76d000) (0MB)
efi: mem70: type=5, attr=0x800000000000000f, range=[0x00000000ca76d000-0x00000000ca76e000) (0MB)
efi: mem71: type=3, attr=0xf, range=[0x00000000ca76e000-0x00000000ca781000) (0MB)
efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca781000-0x00000000ca7a6000) (0MB)
efi: mem73: type=3, attr=0xf, range=[0x00000000ca7a6000-0x00000000ca7b7000) (0MB)
efi: mem74: type=5, attr=0x800000000000000f, range=[0x00000000ca7b7000-0x00000000ca7b8000) (0MB)
efi: mem75: type=3, attr=0xf, range=[0x00000000ca7b8000-0x00000000ca7b9000) (0MB)
efi: mem76: type=5, attr=0x800000000000000f, range=[0x00000000ca7b9000-0x00000000ca7bb000) (0MB)
efi: mem77: type=3, attr=0xf, range=[0x00000000ca7bb000-0x00000000ca7bc000) (0MB)
efi: mem78: type=5, attr=0x800000000000000f, range=[0x00000000ca7bc000-0x00000000ca7c1000) (0MB)
efi: mem79: type=3, attr=0xf, range=[0x00000000ca7c1000-0x00000000ca7d7000) (0MB)
efi: mem80: type=6, attr=0x800000000000000f, range=[0x00000000ca7d7000-0x00000000ca837000) (0MB)
efi: mem81: type=5, attr=0x800000000000000f, range=[0x00000000ca837000-0x00000000ca850000) (0MB)
efi: mem82: type=6, attr=0x800000000000000f, range=[0x00000000ca850000-0x00000000ca856000) (0MB)
efi: mem83: type=6, attr=0x800000000000000f, range=[0x00000000ca856000-0x00000000ca85b000) (0MB)
efi: mem84: type=6, attr=0x800000000000000f, range=[0x00000000ca85b000-0x00000000ca85d000) (0MB)
efi: mem85: type=6, attr=0x800000000000000f, range=[0x00000000ca85d000-0x00000000ca87a000) (0MB)
efi: mem86: type=0, attr=0xf, range=[0x00000000ca87a000-0x00000000cabce000) (3MB)
efi: mem87: type=0, attr=0xf, range=[0x00000000cabce000-0x00000000cad0f000) (1MB)
efi: mem88: type=0, attr=0xf, range=[0x00000000cad0f000-0x00000000cad15000) (0MB)
efi: mem89: type=0, attr=0xf, range=[0x00000000cad15000-0x00000000cad7a000) (0MB)
efi: mem90: type=10, attr=0xf, range=[0x00000000cad7a000-0x00000000cae35000) (0MB)
efi: mem91: type=10, attr=0xf, range=[0x00000000cae35000-0x00000000cafe3000) (1MB)
efi: mem92: type=10, attr=0xf, range=[0x00000000cafe3000-0x00000000cafe6000) (0MB)
efi: mem93: type=10, attr=0xf, range=[0x00000000cafe6000-0x00000000caffa000) (0MB)
efi: mem94: type=9, attr=0xf, range=[0x00000000caffa000-0x00000000caffe000) (0MB)
efi: mem95: type=9, attr=0xf, range=[0x00000000caffe000-0x00000000cafff000) (0MB)
efi: mem96: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
efi: mem97: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f200000) (4850MB)
efi: mem98: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
efi: mem99: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: ASUSTeK COMPUTER INC. K55VD/K55VD, BIOS K55VD.203 03/12/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x22f200 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask E00000000 write-back
  1 base 200000000 mask FE0000000 write-back
  2 base 220000000 mask FF0000000 write-back
  3 base 0E0000000 mask FE0000000 uncachable
  4 base 0D0000000 mask FF0000000 uncachable
  5 base 0CC000000 mask FFC000000 uncachable
  6 base 0CBC00000 mask FFFC00000 uncachable
  7 base 22F800000 mask FFF800000 uncachable
  8 base 22F400000 mask FFFC00000 uncachable
  9 base 22F200000 mask FFFE00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff8800000fd7e0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01b2f000, 0x01b2ffff] PGTABLE
BRK [0x01b30000, 0x01b30fff] PGTABLE
BRK [0x01b31000, 0x01b31fff] PGTABLE
init_memory_mapping: [mem 0x22f000000-0x22f1fffff]
 [mem 0x22f000000-0x22f1fffff] page 2M
BRK [0x01b32000, 0x01b32fff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22effffff]
 [mem 0x22c000000-0x22effffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
 [mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x40003fff]
 [mem 0x20200000-0x3fffffff] page 2M
 [mem 0x40000000-0x40003fff] page 4k
BRK [0x01b33000, 0x01b33fff] PGTABLE
BRK [0x01b34000, 0x01b34fff] PGTABLE
init_memory_mapping: [mem 0x40005000-0xc90dbfff]
 [mem 0x40005000-0x401fffff] page 4k
 [mem 0x40200000-0xc8ffffff] page 2M
 [mem 0xc9000000-0xc90dbfff] page 4k
init_memory_mapping: [mem 0xc911f000-0xc9528fff]
 [mem 0xc911f000-0xc91fffff] page 4k
 [mem 0xc9200000-0xc93fffff] page 2M
 [mem 0xc9400000-0xc9528fff] page 4k
init_memory_mapping: [mem 0xc97fb000-0xc9f02fff]
 [mem 0xc97fb000-0xc97fffff] page 4k
 [mem 0xc9800000-0xc9dfffff] page 2M
 [mem 0xc9e00000-0xc9f02fff] page 4k
init_memory_mapping: [mem 0xca507000-0xca526fff]
 [mem 0xca507000-0xca526fff] page 4k
init_memory_mapping: [mem 0xca52d000-0xca52efff]
 [mem 0xca52d000-0xca52efff] page 4k
init_memory_mapping: [mem 0xca53d000-0xca68efff]
 [mem 0xca53d000-0xca68efff] page 4k
init_memory_mapping: [mem 0xca693000-0xca6d6fff]
 [mem 0xca693000-0xca6d6fff] page 4k
init_memory_mapping: [mem 0xca6f7000-0xca6fefff]
 [mem 0xca6f7000-0xca6fefff] page 4k
init_memory_mapping: [mem 0xca701000-0xca717fff]
 [mem 0xca701000-0xca717fff] page 4k
init_memory_mapping: [mem 0xca71e000-0xca72ffff]
 [mem 0xca71e000-0xca72ffff] page 4k
init_memory_mapping: [mem 0xca731000-0xca73efff]
 [mem 0xca731000-0xca73efff] page 4k
init_memory_mapping: [mem 0xca744000-0xca76cfff]
 [mem 0xca744000-0xca76cfff] page 4k
init_memory_mapping: [mem 0xca76e000-0xca780fff]
 [mem 0xca76e000-0xca780fff] page 4k
init_memory_mapping: [mem 0xca7a6000-0xca7b6fff]
 [mem 0xca7a6000-0xca7b6fff] page 4k
init_memory_mapping: [mem 0xca7b8000-0xca7b8fff]
 [mem 0xca7b8000-0xca7b8fff] page 4k
init_memory_mapping: [mem 0xca7bb000-0xca7bbfff]
 [mem 0xca7bb000-0xca7bbfff] page 4k
init_memory_mapping: [mem 0xca7c1000-0xca7d6fff]
 [mem 0xca7c1000-0xca7d6fff] page 4k
init_memory_mapping: [mem 0xcafff000-0xcaffffff]
 [mem 0xcafff000-0xcaffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
 [mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x3775c000-0x37ba5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CAFCD000 000024 (v02 _ASUS_)
ACPI: XSDT 0x00000000CAFCD078 000074 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FACP 0x00000000CAFDFE80 0000F4 (v04 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: DSDT 0x00000000CAFCD188 012CF8 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
ACPI: FACS 0x00000000CAFF7F80 000040
ACPI: APIC 0x00000000CAFDFF78 000092 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FPDT 0x00000000CAFE0010 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: ECDT 0x00000000CAFE0058 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: MCFG 0x00000000CAFE0120 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: SLIC 0x00000000CAFE0160 000176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
ACPI: HPET 0x00000000CAFE02D8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CAFE0310 00090A (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000CAFE0C20 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: BGRT 0x00000000CAFE16B8 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022f1fffff]
Initmem setup node 0 [mem 0x00000000-0x22f1fffff]
  NODE_DATA [mem 0x22f1ef000-0x22f1f2fff]
 [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226800000-ffff88022e7fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x22f1fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x1fffffff]
  node   0: [mem 0x20200000-0x40003fff]
  node   0: [mem 0x40005000-0xc90dbfff]
  node   0: [mem 0xc911f000-0xc9528fff]
  node   0: [mem 0xc97fb000-0xc9f02fff]
  node   0: [mem 0xca507000-0xca526fff]
  node   0: [mem 0xca52d000-0xca52efff]
  node   0: [mem 0xca53d000-0xca68efff]
  node   0: [mem 0xca693000-0xca6d6fff]
  node   0: [mem 0xca6f7000-0xca6fefff]
  node   0: [mem 0xca701000-0xca717fff]
  node   0: [mem 0xca71e000-0xca72ffff]
  node   0: [mem 0xca731000-0xca73efff]
  node   0: [mem 0xca744000-0xca76cfff]
  node   0: [mem 0xca76e000-0xca780fff]
  node   0: [mem 0xca7a6000-0xca7b6fff]
  node   0: [mem 0xca7b8000-0xca7b8fff]
  node   0: [mem 0xca7bb000-0xca7bbfff]
  node   0: [mem 0xca7c1000-0xca7d6fff]
  node   0: [mem 0xcafff000-0xcaffffff]
  node   0: [mem 0x100000000-0x22f1fffff]
On node 0 totalpages: 2067944
  DMA zone: 64 pages used for memmap
  DMA zone: 27 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 12850 pages used for memmap
  DMA32 zone: 822346 pages, LIFO batch:31
  Normal zone: 19400 pages used for memmap
  Normal zone: 1241600 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xc90dc000-0xc911efff]
PM: Registered nosave memory: [mem 0xc9529000-0xc97fafff]
PM: Registered nosave memory: [mem 0xc9f03000-0xca503fff]
PM: Registered nosave memory: [mem 0xca504000-0xca506fff]
PM: Registered nosave memory: [mem 0xca527000-0xca52cfff]
PM: Registered nosave memory: [mem 0xca52f000-0xca53cfff]
PM: Registered nosave memory: [mem 0xca68f000-0xca692fff]
PM: Registered nosave memory: [mem 0xca6d7000-0xca6d8fff]
PM: Registered nosave memory: [mem 0xca6d9000-0xca6e5fff]
PM: Registered nosave memory: [mem 0xca6e6000-0xca6f6fff]
PM: Registered nosave memory: [mem 0xca6ff000-0xca700fff]
PM: Registered nosave memory: [mem 0xca718000-0xca71dfff]
PM: Registered nosave memory: [mem 0xca730000-0xca730fff]
PM: Registered nosave memory: [mem 0xca73f000-0xca743fff]
PM: Registered nosave memory: [mem 0xca76d000-0xca76dfff]
PM: Registered nosave memory: [mem 0xca781000-0xca7a5fff]
PM: Registered nosave memory: [mem 0xca7b7000-0xca7b7fff]
PM: Registered nosave memory: [mem 0xca7b9000-0xca7bafff]
PM: Registered nosave memory: [mem 0xca7bc000-0xca7c0fff]
PM: Registered nosave memory: [mem 0xca7d7000-0xca836fff]
PM: Registered nosave memory: [mem 0xca837000-0xca84ffff]
PM: Registered nosave memory: [mem 0xca850000-0xcad79fff]
PM: Registered nosave memory: [mem 0xcad7a000-0xcaff9fff]
PM: Registered nosave memory: [mem 0xcaffa000-0xcaffefff]
PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88022ee00000 s86848 r8192 d23744 u262144
pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2035603
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7878876K/8271776K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 392900K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	Dump stacks of tasks blocking RCU-preempt GP.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 0
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.617 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.45 BogoMIPS (lpj=7648723)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140724
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
ftrace: allocating 20674 entries in 81 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2
CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
 #3
CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (36728.61 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xc90dc000-0xc911efff] (274432 bytes)
PM: Registering ACPI NVS region [mem 0xc9f03000-0xca503fff] (6295552 bytes)
PM: Registering ACPI NVS region [mem 0xcad7a000-0xcaff9fff] (2621440 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:10:42, date: 10/29/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802232EA000 000853 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802232C3400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802232BDA00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf791a000-0xf791a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7918000-0xf79183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7917000-0xf79173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7916000-0xf79167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7915000-0xf79150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
pci 0000:01:00.0: [10de:1058] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:5289] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf780ffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.2: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:03:00.2: reg 0x18: [mem 0xea104000-0xea104fff 64bit pref]
pci 0000:03:00.2: reg 0x20: [mem 0xea100000-0xea103fff 64bit pref]
pci 0000:03:00.2: supports D1 D2
pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.3:   bridge window [mem 0xea100000-0xea1fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 12)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xc90dc000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc9529000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc9f03000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca527000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca52f000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca68f000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca6d7000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca6ff000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca718000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca730000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca73f000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca76d000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca781000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca7b7000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca7b9000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca7bc000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca7d7000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
e820: reserve RAM buffer [mem 0x22f200000-0x22fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0x0200-0x020f] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0x0400-0x0453] could not be reserved
system 00:01: [io  0x0458-0x047f] has been reserved
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xcfe00000-0xcfe00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xcfe00000-0xcfe00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x20000000-0x201fffff] has been reserved
system 00:09: [mem 0x40004000-0x40004fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xea200000-0xea3fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xea400000-0xea5fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xea200000-0xea3fffff]
pci 0000:00:1c.0:   bridge window [mem 0xea400000-0xea5fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.3:   bridge window [mem 0xea100000-0xea1fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xea200000-0xea3fffff]
pci_bus 0000:02: resource 2 [mem 0xea400000-0xea5fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
pci_bus 0000:03: resource 2 [mem 0xea100000-0xea1fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4392K (ffff88003775c000 - ffff880037ba6000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xba7e5000-0xbe7e5000] (64MB) mapped at [ffff8800ba7e5000-ffff8800be7e4fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x1b
microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x1b
microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x1b
microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x1b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15745
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004e80000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
  Magic number: 2:412:185
acpi device:44: hash matches
rtc_cmos 00:02: setting system clock to 2014-10-29 15:10:43 UTC (1414595443)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
random: systemd-tmpfile urandom read with 2 bits of entropy available
systemd-udevd[77]: starting version 216
[drm] Initialized drm 1.1.0 20060810
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input3
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
[drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
rtsx_pci 0000:03:00.0: irq 28 for MSI/MSI-X
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 28
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
libata version 3.00 loaded.
ehci-pci: EHCI PCI platform driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 29 for MSI/MSI-X
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7918000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7917000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916100 irq 30
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
usb 1-1: new low-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: WDC WD7500BPKX-22HPJT0, 01.01A01, max UDMA/133
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPKX-2 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: DragonRise Inc.   Generic   USB  Joystick   as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0079:0006.0001/input/input10
dragonrise 0003:0079:0006.0001: input,hidraw0: USB HID v1.10 Joystick [DragonRise Inc.   Generic   USB  Joystick  ] on usb-0000:00:14.0-1/input0
dragonrise 0003:0079:0006.0001: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley 
tsc: Refined TSC clocksource calibration: 2294.787 MHz
usb 1-2: new full-speed USB device number 3 using xhci_hcd
EXT4-fs (sda3): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 1-3: new full-speed USB device number 4 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
usb 1-3: hub failed to enable device, error -22
usb 1-3: new full-speed USB device number 5 using xhci_hcd
Switched to clocksource tsc
usb 1-3: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
usb 1-3: hub failed to enable device, error -22
usb 1-3: new full-speed USB device number 6 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Set hostname to .
usb 1-3: device not accepting address 6, error -71
random: nonblocking pool is initialized
usb 1-3: new full-speed USB device number 7 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 7, error -71
usb usb1-port3: unable to enumerate USB device
usb 3-1: new high-speed USB device number 2 using ehci-pci
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: new high-speed USB device number 2 using ehci-pci
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 6 ports detected
usb 3-1.3: new high-speed USB device number 3 using ehci-pci
systemd[1]: Configuration file /etc/systemd/system/netctl@xenbr0.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Cannot add dependency job for unit crashplan.service, ignoring: Unit crashplan.service failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit devmon@matt.service, ignoring: Unit devmon@matt.service failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit nfs-server.target, ignoring: Unit nfs-server.target failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit gssproxy.service, ignoring: Unit gssproxy.service failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit nfsd.service, ignoring: Unit nfsd.service failed to load: No such file or directory.
systemd[1]: Starting Login Prompts.
systemd[1]: Reached target Login Prompts.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0f2.device...
systemd[1]: Starting Host and Network Name Lookups.
systemd[1]: Reached target Host and Network Name Lookups.
systemd[1]: Starting RPC Port Mapper.
systemd[1]: Reached target RPC Port Mapper.
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Expecting device dev-sda2.device...
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Mounting Temporary Directory...
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Starting system-netctl.slice.
systemd[1]: Created slice system-netctl.slice.
systemd[1]: Starting system-syncthing.slice.
systemd[1]: Created slice system-syncthing.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
EXT4-fs (sda3): re-mounted. Opts: data=ordered
systemd-udevd[210]: starting version 216
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
sd 0:0:0:0: Attached scsi generic sg0 type 0
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.23)
wmi: Mapper loaded
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (58 C)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140724/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140724/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140724/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140724/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc1
ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140724/utaddress-258)
ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
mei_me 0000:00:16.0: irq 32 for MSI/MSI-X
input: PC Speaker as /devices/platform/pcspkr/input/input15
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 7.9
asus_wmi: SFUN value: 0x4a0877
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Internal Mic=0x19
sound hdaudioC0D0:      Mic=0x18
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.2: irq 33 for MSI/MSI-X
r8169 0000:03:00.2 eth0: RTL8411 at 0xffffc90004c82000, 10:bf:48:0a:01:8b, XID 08800800 IRQ 33
r8169 0000:03:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
asus_wmi: Backlight controlled by ACPI video driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
r8169 0000:03:00.2 enp3s0f2: renamed from eth0
systemd-udevd[236]: renamed network interface eth0 to enp3s0f2
raid6: sse2x1    5060 MB/s
raid6: sse2x2    7241 MB/s
AVX version of gcm_enc/dec engaged.
raid6: sse2x4   10611 MB/s
raid6: using algorithm sse2x4 (10611 MB/s)
raid6: using ssse3x2 recovery algorithm
psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f02)
psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
xor: automatically using best checksumming function:
   avx       : 23439.600 MB/sec
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input14
Btrfs loaded
mousedev: PS/2 mouse device common for all mice
BTRFS: device label home devid 1 transid 155048 /dev/sda4
Adding 2097148k swap on /dev/sda2.  Priority:-1 extents:1 across:2097148k FS
BTRFS info (device sda4): disabling disk space caching
BTRFS info (device sda4): force zlib compression
BTRFS info (device sda4): enabling auto defrag
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a014)
input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input20
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
input: Logitech Unifying Device. Wireless PID:4019 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0004/0003:046D:C52B.0005/input/input21
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4019] on usb-0000:00:14.0-2:1
input: Logitech Unifying Device. Wireless PID:4009 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0004/0003:046D:C52B.0006/input/input22
logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4009] on usb-0000:00:14.0-2:2
systemd-journald[189]: Received request to flush runtime journal from PID 1
cfg80211: Calling CRDA to update world regulatory domain
Bridge firewalling registered
r8169 0000:03:00.2 enp3s0f2: link down
r8169 0000:03:00.2 enp3s0f2: link down
device enp3s0f2 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): enp3s0f2: link is not ready
zram: Created 8 device(s) ...
zram0: detected capacity change from 0 to 206442496
IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
zram1: detected capacity change from 0 to 206442496
zram2: detected capacity change from 0 to 206442496
zram3: detected capacity change from 0 to 206442496
zram4: detected capacity change from 0 to 206442496
zram5: detected capacity change from 0 to 206442496
zram6: detected capacity change from 0 to 206442496
zram7: detected capacity change from 0 to 206442496
Adding 201600k swap on /dev/zram0.  Priority:100 extents:1 across:201600k SSFS
Adding 201600k swap on /dev/zram1.  Priority:100 extents:1 across:201600k SSFS
Adding 201600k swap on /dev/zram2.  Priority:100 extents:1 across:201600k SSFS
Adding 201600k swap on /dev/zram3.  Priority:100 extents:1 across:201600k SSFS
Adding 201600k swap on /dev/zram4.  Priority:100 extents:1 across:201600k SSFS
Adding 201600k swap on /dev/zram5.  Priority:100 extents:1 across:201600k SSFS
Adding 201600k swap on /dev/zram6.  Priority:100 extents:1 across:201600k SSFS
Adding 201600k swap on /dev/zram7.  Priority:100 extents:1 across:201600k SSFS
systemd[1]: Unit psd.service entered failed state.
r8169 0000:03:00.2 enp3s0f2: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f2: link becomes ready
xenbr0: port 1(enp3s0f2) entered forwarding state
xenbr0: port 1(enp3s0f2) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
NFSD: starting 90-second grace period (net ffffffff818ae640)
xenbr0: port 1(enp3s0f2) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
device vnet0 entered promiscuous mode
xenbr0: port 2(vnet0) entered forwarding state
xenbr0: port 2(vnet0) entered forwarding state
bbswitch: version 0.8
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
bbswitch: detected an Optimus _DSM function
pci 0000:01:00.0: enabling device (0000 -> 0003)
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
device vnet1 entered promiscuous mode
xenbr0: port 3(vnet1) entered forwarding state
xenbr0: port 3(vnet1) entered forwarding state
kvm: zapping shadow pages for mmio generation wraparound
xenbr0: port 2(vnet0) entered forwarding state
xenbr0: port 3(vnet1) entered forwarding state
kvm [1554]: vcpu0 unhandled rdmsr: 0x611
kvm [1554]: vcpu0 unhandled rdmsr: 0x639
kvm [1554]: vcpu0 unhandled rdmsr: 0x641
kvm [1554]: vcpu0 unhandled rdmsr: 0x619
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
traps: blueman-mechani[2115] trap int3 ip:7fc8eb448a80 sp:7fffcbfb7a50 error:0
traps: blueman-mechani[2154] trap int3 ip:7ff747007a80 sp:7ffff8f690e0 error:0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
traps: blueman-mechani[2161] trap int3 ip:7fd949fb3a80 sp:7fff6adc1220 error:0
owncloud[1947]: segfault at 0 ip           (null) sp 00007fffbd023768 error 14 in owncloud[400000+da000]
traps: blueman-mechani[2470] trap int3 ip:7f442784ea80 sp:7fffe6babe20 error:0
traps: blueman-mechani[2546] trap int3 ip:7f30ad5caa80 sp:7fff9f35ce30 error:0
traps: blueman-mechani[2550] trap int3 ip:7ffe005e8a80 sp:7ffffe1367b0 error:0
xenbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
xenbr0: port 2(vnet0) entered disabled state
EXT4-fs (sda3): error count since last fsck: 9
EXT4-fs (sda3): initial error at time 1404119865: ext4_mb_generate_buddy:756
EXT4-fs (sda3): last error at time 1405066902: ext4_mb_generate_buddy:756
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 617.005 msecs
PM: late suspend of devices complete after 13.289 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
r8169 0000:03:00.2: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.278 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.830 msecs
PM: early resume of devices complete after 0.553 msecs
mei_me 0000:00:16.0: irq 31 for MSI/MSI-X
r8169 0000:03:00.2: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:02: System wakeup disabled by ACPI
r8169 0000:03:00.2 enp3s0f2: link down
xenbr0: port 1(enp3s0f2) entered disabled state
usb 3-1.3: reset high-speed USB device number 3 using ehci-pci
PM: resume of devices complete after 401.073 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
usb 1-3: new high-speed USB device number 8 using xhci_hcd
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-3.4: new high-speed USB device number 9 using xhci_hcd
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 4 ports detected
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 4, act. len = 4294967292
hub 1-3.4:1.0: hub_port_status failed (err = 0)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: Cannot enable. Maybe the USB cable is bad?
usb 1-3.4-port3: cannot disable (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: Cannot enable. Maybe the USB cable is bad?
usb 1-3.4-port3: cannot disable (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: Cannot enable. Maybe the USB cable is bad?
usb 1-3.4-port3: cannot disable (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: cannot reset (err = -71)
usb 1-3.4-port3: Cannot enable. Maybe the USB cable is bad?
usb 1-3.4-port3: cannot disable (err = -71)
usb 1-3.4-port3: unable to enumerate USB device
usb 1-3.4-port3: cannot disable (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 4, act. len = 4294967292
hub 1-3.4:1.0: hub_port_status failed (err = 0)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 4, act. len = 4294967292
hub 1-3.4:1.0: hub_port_status failed (err = 0)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
hub 1-3.4:1.0: hub_port_status failed (err = -71)
xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288
hub 1-3:1.0: hub_port_status failed (err = -71)
hub 1-3:1.0: hub_port_status failed (err = -71)
hub 1-3:1.0: hub_port_status failed (err = -71)
r8169 0000:03:00.2 enp3s0f2: link up
xenbr0: port 1(enp3s0f2) entered forwarding state
xenbr0: port 1(enp3s0f2) entered forwarding state
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
systemd[1]: Unit resume-fix-pulseaudio@matt.service entered failed state.
xenbr0: port 1(enp3s0f2) entered forwarding state
perf interrupt took too long (2506 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
xenbr0: port 3(vnet1) entered disabled state
device vnet1 left promiscuous mode
xenbr0: port 3(vnet1) entered disabled state
device vnet0 entered promiscuous mode
xenbr0: port 2(vnet0) entered forwarding state
xenbr0: port 2(vnet0) entered forwarding state
xenbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
xenbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
xenbr0: port 2(vnet0) entered forwarding state
xenbr0: port 2(vnet0) entered forwarding state
kvm: zapping shadow pages for mmio generation wraparound
kvm [6161]: vcpu0 unhandled rdmsr: 0x606
xenbr0: port 2(vnet0) entered forwarding state
kvm [6161]: vcpu0 unhandled rdmsr: 0x611
kvm [6161]: vcpu0 unhandled rdmsr: 0x639
kvm [6161]: vcpu0 unhandled rdmsr: 0x641
kvm [6161]: vcpu0 unhandled rdmsr: 0x619
kvm [6161]: vcpu0 unhandled rdmsr: 0x611
kvm [6161]: vcpu0 unhandled rdmsr: 0x639
kvm [6161]: vcpu0 unhandled rdmsr: 0x641
kvm [6161]: vcpu0 unhandled rdmsr: 0x619
xenbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
xenbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
xenbr0: port 2(vnet0) entered forwarding state
xenbr0: port 2(vnet0) entered forwarding state
kvm: zapping shadow pages for mmio generation wraparound
kvm [7749]: vcpu0 unhandled rdmsr: 0x606
kvm [7749]: vcpu0 unhandled rdmsr: 0x611
kvm [7749]: vcpu0 unhandled rdmsr: 0x639
kvm [7749]: vcpu0 unhandled rdmsr: 0x641
kvm [7749]: vcpu0 unhandled rdmsr: 0x619
kvm [7749]: vcpu0 unhandled rdmsr: 0x611
kvm [7749]: vcpu0 unhandled rdmsr: 0x639
kvm [7749]: vcpu0 unhandled rdmsr: 0x641
kvm [7749]: vcpu0 unhandled rdmsr: 0x619
xenbr0: port 2(vnet0) entered forwarding state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
hub 1-3:1.0: hub_port_status failed (err = -71)
hub 1-3:1.0: hub_port_status failed (err = -71)
usb 1-3-port4: cannot reset (err = -71)
usb 1-3-port4: device 1-3.4 not suspended yet
PM: suspend of devices complete after 622.214 msecs
PM: late suspend of devices complete after 13.284 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
r8169 0000:03:00.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.336 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.766 msecs
PM: early resume of devices complete after 0.461 msecs
mei_me 0000:00:16.0: irq 31 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
r8169 0000:03:00.2: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:02: System wakeup disabled by ACPI
r8169 0000:03:00.2 enp3s0f2: link down
xenbr0: port 1(enp3s0f2) entered disabled state
usb 3-1.3: reset high-speed USB device number 3 using ehci-pci
usb 1-3: reset high-speed USB device number 8 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
usb 1-3: hub failed to enable device, error -22
usb 1-3: reset high-speed USB device number 8 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
usb 1-3: hub failed to enable device, error -22
usb 1-3: reset high-speed USB device number 8 using xhci_hcd
usb 1-3: device descriptor read/8, error -71
usb 1-3: device descriptor read/8, error -71
PM: resume of devices complete after 1126.073 msecs
PM: Finishing wakeup.
Restarting tasks ... 
usb 1-3: USB disconnect, device number 8
usb 1-3.4: USB disconnect, device number 9
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b36dd5a0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021e8c3a20
done.
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
systemd[1]: Unit suspend.target is bound to inactive service. Stopping, too.
usb 1-3: new full-speed USB device number 14 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 13.
usb 1-3: hub failed to enable device, error -22
r8169 0000:03:00.2 enp3s0f2: link up
xenbr0: port 1(enp3s0f2) entered forwarding state
xenbr0: port 1(enp3s0f2) entered forwarding state
usb 1-3: new full-speed USB device number 15 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 14.
usb 1-3: hub failed to enable device, error -22
usb 1-3: new full-speed USB device number 16 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 1-3: device not accepting address 16, error -71
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
usb 1-3: new full-speed USB device number 17 using xhci_hcd
usb 1-3: Device not responding to setup address.
systemd[1]: Unit shadow.service entered failed state.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 17, error -71
usb usb1-port3: unable to enumerate USB device
xenbr0: port 1(enp3s0f2) entered forwarding state
bbswitch: enabling discrete graphics
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  343.22  Thu Sep 11 16:27:43 PDT 2014
nvidia 0000:01:00.0: irq 34 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[drm] Module unloaded
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
pci 0000:01:00.0: Refused to change power state, currently in D0
usb 1-1: USB disconnect, device number 2
usb 1-1: new low-speed USB device number 18 using xhci_hcd
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
input: DragonRise Inc.   Generic   USB  Joystick   as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0079:0006.0007/input/input35
dragonrise 0003:0079:0006.0007: input,hidraw0: USB HID v1.10 Joystick [DragonRise Inc.   Generic   USB  Joystick  ] on usb-0000:00:14.0-1/input0
dragonrise 0003:0079:0006.0007: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley 
usb 1-1: USB disconnect, device number 18
usb 1-1: new low-speed USB device number 19 using xhci_hcd
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
input: DragonRise Inc.   Generic   USB  Joystick   as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0079:0006.0008/input/input36
dragonrise 0003:0079:0006.0008: input,hidraw0: USB HID v1.10 Joystick [DragonRise Inc.   Generic   USB  Joystick  ] on usb-0000:00:14.0-1/input0
dragonrise 0003:0079:0006.0008: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley 
xenbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
xenbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
xenbr0: port 2(vnet0) entered forwarding state
xenbr0: port 2(vnet0) entered forwarding state
kvm: zapping shadow pages for mmio generation wraparound
kvm [23732]: vcpu0 unhandled rdmsr: 0x606
xenbr0: port 2(vnet0) entered forwarding state
kvm [23732]: vcpu0 unhandled rdmsr: 0x611
kvm [23732]: vcpu0 unhandled rdmsr: 0x639
kvm [23732]: vcpu0 unhandled rdmsr: 0x641
kvm [23732]: vcpu0 unhandled rdmsr: 0x619
kvm [23732]: vcpu0 unhandled rdmsr: 0x611
kvm [23732]: vcpu0 unhandled rdmsr: 0x639
kvm [23732]: vcpu0 unhandled rdmsr: 0x641
kvm [23732]: vcpu0 unhandled rdmsr: 0x619
usb 1-1: USB disconnect, device number 19
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 2f 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Alternate GPT is invalid, using primary GPT.
 sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12
sd 6:0:0:0: [sdb] Attached SCSI removable disk
 sdb: sdb1 sdb2
 sdb: sdb1 sdb2
 sdb: sdb1 sdb2
 sdb: sdb1 sdb2
usb 2-1: USB disconnect, device number 2
usb 1-1: new high-speed USB device number 20 using xhci_hcd
usb 1-1: can't set config #1, error -71
usb 1-1: USB disconnect, device number 20
usb 1-1: new high-speed USB device number 21 using xhci_hcd
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host7: usb-storage 1-1:1.0
scsi 7:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 2f 00 00 00
sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 7:0:0:0: [sdb] Attached SCSI removable disk
ISO 9660 Extensions: RRIP_1991A
sdb: detected capacity change from 32010928128 to 0
usb 1-1: USB disconnect, device number 21
usb 1-1: new high-speed USB device number 22 using xhci_hcd
usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host8: usb-storage 2-1:1.0
scsi 8:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 4
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 2f 00 00 00
sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 8:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1: USB disconnect, device number 3
usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host9: usb-storage 2-1:1.0
scsi 9:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 4
sd 9:0:0:0: Attached scsi generic sg1 type 0
sd 9:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 2f 00 00 00
sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 9:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1: USB disconnect, device number 4
usb 2-1: new SuperSpeed USB device number 5 using xhci_hcd
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-1:1.0
scsi 10:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 4
sd 10:0:0:0: Attached scsi generic sg1 type 0
sd 10:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 2f 00 00 00
sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 10:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1: USB disconnect, device number 5
usb 2-1: new SuperSpeed USB device number 6 using xhci_hcd
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host11: usb-storage 2-1:1.0
scsi 11:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 4
sd 11:0:0:0: Attached scsi generic sg1 type 0
sd 11:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 11:0:0:0: [sdb] Write Protect is off
sd 11:0:0:0: [sdb] Mode Sense: 2f 00 00 00
sd 11:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 11:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1: USB disconnect, device number 6
usb 1-1: new low-speed USB device number 23 using xhci_hcd
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
input: DragonRise Inc.   Generic   USB  Joystick   as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0079:0006.0009/input/input37
dragonrise 0003:0079:0006.0009: input,hidraw0: USB HID v1.10 Joystick [DragonRise Inc.   Generic   USB  Joystick  ] on usb-0000:00:14.0-1/input0
dragonrise 0003:0079:0006.0009: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley 
usb 1-3: new full-speed USB device number 24 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 28.
usb 1-3: hub failed to enable device, error -22
usb 1-3: new full-speed USB device number 25 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 29.
usb 1-3: hub failed to enable device, error -22
usb 1-3: new full-speed USB device number 26 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 26, error -71
usb 1-3: new full-speed USB device number 27 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 27, error -71
usb usb1-port3: unable to enumerate USB device
usb 1-3: new high-speed USB device number 28 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 32.
usb 1-3: hub failed to enable device, error -22
usb 1-3: new high-speed USB device number 30 using xhci_hcd
usb 1-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 1-3: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 167772140, Max: 1607
xhci_hcd 0000:00:14.0: Not enough bandwidth
usb 1-3: can't set config #1, error -12
usb 1-3: USB disconnect, device number 30
usb 1-3: new high-speed USB device number 31 using xhci_hcd
usb 1-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 1-3: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 167772140, Max: 1607
xhci_hcd 0000:00:14.0: Not enough bandwidth
usb 1-3: can't set config #1, error -12
usb 1-3: USB disconnect, device number 31
usb 1-3: new high-speed USB device number 32 using xhci_hcd
usb 1-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 1-3: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 167772140, Max: 1607
xhci_hcd 0000:00:14.0: Not enough bandwidth
usb 1-3: can't set config #1, error -12
usb 1-3: USB disconnect, device number 32
usb 1-3: new high-speed USB device number 33 using xhci_hcd
xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 167772140, Max: 1607
xhci_hcd 0000:00:14.0: Not enough bandwidth
usb 1-3: can't set config #1, error -12
usb 1-1: USB disconnect, device number 23
usb 2-1: new SuperSpeed USB device number 7 using xhci_hcd
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host12: usb-storage 2-1:1.0
scsi 12:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 4
sd 12:0:0:0: Attached scsi generic sg1 type 0
usb 1-3: USB disconnect, device number 33
sd 12:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 12:0:0:0: [sdb] Write Protect is off
sd 12:0:0:0: [sdb] Mode Sense: 2f 00 00 00
sd 12:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 12:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1: USB disconnect, device number 7
usb 2-1: new SuperSpeed USB device number 8 using xhci_hcd
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 2-1:1.0
scsi 13:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
sd 13:0:0:0: Attached scsi generic sg1 type 0
sd 13:0:0:0: [sdb] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB)
sd 13:0:0:0: [sdb] Write Protect is off
sd 13:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 13:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 13:0:0:0: [sdb] Attached SCSI removable disk
usb 1-3: new high-speed USB device number 34 using xhci_hcd
usb 1-3: device descriptor read/all, error -71
usb 1-3: new full-speed USB device number 35 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 8.
usb 1-3: hub failed to enable device, error -22
usb 1-3: new full-speed USB device number 36 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 36, error -71
usb 1-3: new full-speed USB device number 37 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 37, error -71
usb usb1-port3: unable to enumerate USB device
NILFS version 2 loaded
NILFS warning: mounting unchecked fs
NILFS: recovery complete.
segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
usb 2-1: USB disconnect, device number 8
sd 13:0:0:0: [sdb] Synchronizing SCSI cache
sd 13:0:0:0: [sdb]  
Result: hostbyte=0x01 driverbyte=0x00
Buffer I/O error on device sdb1, logical block 0
lost page write due to I/O error on sdb1
NILFS: unable to write superblock (err=-5)
Buffer I/O error on device sdb1, logical block 3931903
lost page write due to I/O error on sdb1
NILFS: unable to write superblock (err=-5)
usb 2-1: new SuperSpeed USB device number 9 using xhci_hcd
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host14: usb-storage 2-1:1.0
scsi 14:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 4
sd 14:0:0:0: Attached scsi generic sg1 type 0
sd 14:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 14:0:0:0: [sdb] Write Protect is off
sd 14:0:0:0: [sdb] Mode Sense: 2f 00 00 00
sd 14:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 14:0:0:0: [sdb] Attached SCSI removable disk
ISO 9660 Extensions: RRIP_1991A
usb 2-1: USB disconnect, device number 9
usb 1-1: new high-speed USB device number 39 using xhci_hcd
usb 1-1: new high-speed USB device number 40 using xhci_hcd
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1:1.0
scsi 15:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 4
sd 15:0:0:0: Attached scsi generic sg1 type 0
sd 15:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 15:0:0:0: [sdb] Write Protect is off
sd 15:0:0:0: [sdb] Mode Sense: 2f 00 00 00
sd 15:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 15:0:0:0: [sdb] Attached SCSI removable disk
usb 1-1: USB disconnect, device number 40
usb 1-1: new low-speed USB device number 41 using xhci_hcd
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
input: DragonRise Inc.   Generic   USB  Joystick   as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0079:0006.000A/input/input38
dragonrise 0003:0079:0006.000A: input,hidraw0: USB HID v1.10 Joystick [DragonRise Inc.   Generic   USB  Joystick  ] on usb-0000:00:14.0-1/input0
dragonrise 0003:0079:0006.000A: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley 
[drm:ivybridge_set_fifo_underrun_reporting] *ERROR* uncleared fifo underrun on pipe B
[drm:ivb_err_int_handler] *ERROR* Pipe B FIFO underrun
[drm:ivybridge_set_fifo_underrun_reporting] *ERROR* uncleared fifo underrun on pipe B
[drm:ivb_err_int_handler] *ERROR* Pipe B FIFO underrun
[drm:ivybridge_set_fifo_underrun_reporting] *ERROR* uncleared fifo underrun on pipe B
[drm:ivb_err_int_handler] *ERROR* Pipe B FIFO underrun
[drm:ivybridge_set_fifo_underrun_reporting] *ERROR* uncleared fifo underrun on pipe B
[drm:ivb_err_int_handler] *ERROR* Pipe B FIFO underrun
usb 1-1: USB disconnect, device number 41
usb 1-1: new low-speed USB device number 42 using xhci_hcd
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
input: DragonRise Inc.   Generic   USB  Joystick   as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0079:0006.000B/input/input39
dragonrise 0003:0079:0006.000B: input,hidraw0: USB HID v1.10 Joystick [DragonRise Inc.   Generic   USB  Joystick  ] on usb-0000:00:14.0-1/input0
dragonrise 0003:0079:0006.000B: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley 
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 645.277 msecs
PM: late suspend of devices complete after 13.287 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
r8169 0000:03:00.2: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.386 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.797 msecs
PM: early resume of devices complete after 0.396 msecs
mei_me 0000:00:16.0: irq 31 for MSI/MSI-X
r8169 0000:03:00.2: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:02: System wakeup disabled by ACPI
r8169 0000:03:00.2 enp3s0f2: link down
xenbr0: port 1(enp3s0f2) entered disabled state
usb 3-1.3: reset high-speed USB device number 3 using ehci-pci
PM: resume of devices complete after 401.334 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
r8169 0000:03:00.2 enp3s0f2: link up
xenbr0: port 1(enp3s0f2) entered forwarding state
xenbr0: port 1(enp3s0f2) entered forwarding state
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
systemd[1]: Unit resume-fix-pulseaudio@matt.service entered failed state.
xenbr0: port 1(enp3s0f2) entered forwarding state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 615.375 msecs
PM: late suspend of devices complete after 13.285 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
r8169 0000:03:00.2: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.345 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.958 msecs
PM: early resume of devices complete after 0.522 msecs
mei_me 0000:00:16.0: irq 31 for MSI/MSI-X
r8169 0000:03:00.2: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
r8169 0000:03:00.2 enp3s0f2: link down
xenbr0: port 1(enp3s0f2) entered disabled state
usb 3-1.3: reset high-speed USB device number 3 using ehci-pci
PM: resume of devices complete after 404.354 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
r8169 0000:03:00.2 enp3s0f2: link up
xenbr0: port 1(enp3s0f2) entered forwarding state
xenbr0: port 1(enp3s0f2) entered forwarding state
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
systemd[1]: Unit suspend.target is bound to inactive service. Stopping, too.
systemd[1]: Unit resume-fix-pulseaudio@matt.service entered failed state.
systemd[1]: Unit shadow.service entered failed state.
xenbr0: port 1(enp3s0f2) entered forwarding state
usb 1-3: new high-speed USB device number 43 using xhci_hcd
usb 1-3: device descriptor read/all, error -71
usb 1-3: new full-speed USB device number 44 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 20.
usb 1-3: hub failed to enable device, error -22
usb 1-3: new full-speed USB device number 45 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 45, error -71
usb 1-3: new full-speed USB device number 46 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 46, error -71
usb usb1-port3: unable to enumerate USB device
usb 1-2: USB disconnect, device number 3
usb 1-2: new full-speed USB device number 47 using xhci_hcd
logitech-djreceiver 0003:046D:C52B.000E: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
input: Logitech Unifying Device. Wireless PID:4019 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.000E/0003:046D:C52B.000F/input/input52
logitech-djdevice 0003:046D:C52B.000F: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4019] on usb-0000:00:14.0-2:1
input: Logitech Unifying Device. Wireless PID:4009 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.000E/0003:046D:C52B.0010/input/input53
logitech-djdevice 0003:046D:C52B.0010: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4009] on usb-0000:00:14.0-2:2
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 646.648 msecs
PM: late suspend of devices complete after 13.330 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
r8169 0000:03:00.2: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.355 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 microcode updated early to revision 0x1b, date = 2014-05-29
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.684 msecs
PM: early resume of devices complete after 0.285 msecs
mei_me 0000:00:16.0: irq 31 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
r8169 0000:03:00.2: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:02: System wakeup disabled by ACPI
r8169 0000:03:00.2 enp3s0f2: link down
xenbr0: port 1(enp3s0f2) entered disabled state
usb 3-1.3: reset high-speed USB device number 3 using ehci-pci
PM: resume of devices complete after 404.941 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
usb 1-3: new high-speed USB device number 48 using xhci_hcd
r8169 0000:03:00.2 enp3s0f2: link up
xenbr0: port 1(enp3s0f2) entered forwarding state
xenbr0: port 1(enp3s0f2) entered forwarding state
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
systemd[1]: Unit suspend.target is bound to inactive service. Stopping, too.
systemd[1]: Unit resume-fix-pulseaudio@matt.service entered failed state.
systemd[1]: Unit shadow.service entered failed state.
xhci_hcd 0000:00:14.0: Command completion event does not match command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 1-3: device not accepting address 48, error -62
usb 1-3: new high-speed USB device number 49 using xhci_hcd
usb 1-3: device descriptor read/all, error -71
usb 1-3: new full-speed USB device number 50 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 50, error -71
usb 1-3: new full-speed USB device number 51 using xhci_hcd
usb 1-3: Device not responding to setup address.
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 51, error -71
usb usb1-port3: unable to enumerate USB device
xenbr0: port 1(enp3s0f2) entered forwarding state

Return To k55vd System Information