dmesg - pc-p4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@komainu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:31:42 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000004ff2ffff] usable
BIOS-e820: [mem 0x000000004ff30000-0x000000004ff3ffff] ACPI data
BIOS-e820: [mem 0x000000004ff40000-0x000000004ffeffff] ACPI NVS
BIOS-e820: [mem 0x000000004fff0000-0x000000004fffffff] reserved
BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P4V8X-X, BIOS 1004.009 11/12/2003
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x4ff30 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 040000000 mask FF0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 base 0E0000000 mask FFC000000 write-combining
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b88000, 0x01b88fff] PGTABLE
RAMDISK: [mem 0x34b48000-0x3659bfff]
ACPI: RSDP 000fa3a0 000014 (v00 ACPIAM)
ACPI: RSDT 4ff30000 000030 (v01 A M I OEMRSDT 11000312 MSFT 00000097)
ACPI: FACP 4ff30200 000081 (v02 A M I OEMFACP 11000312 MSFT 00000097)
ACPI: DSDT 4ff303f0 003562 (v01 A0017 A0017001 00000001 INTL 02002026)
ACPI: FACS 4ff40000 000040
ACPI: APIC 4ff30390 000052 (v01 A M I OEMAPIC 11000312 MSFT 00000097)
ACPI: OEMB 4ff40040 000040 (v01 A M I AMI_OEM 11000312 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
387MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b89000, 0x01b89fff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x4ff2ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x4ff2ffff]
On node 0 totalpages: 327374
free_area_init_node: node 0, pgdat c1990a80, node_mem_map f71fe020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 775 pages used for memmap
HighMem zone: 99122 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
e820: [mem 0x50000000-0xff7bffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f71db000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 325590
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 2619768 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0004ff30)
Memory: 1256912K/1309496K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 52584K reserved, 396488K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19ae000 - 0xc1a88000 ( 872 kB)
.data : 0xc165b132 - 0xc19ad4c0 (3400 kB)
.text : 0xc1000000 - 0xc165b132 (6508 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f6808000 soft=f680a000
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2399.848 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.69 BogoMIPS (lpj=9599392)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27695 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz (fam: 0f, model: 02, stepping: 04)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (4799.69 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x4ff40000-0x4ffeffff] (720896 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:03:04, date: 10/13/14
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x50000000-0xffffffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [1106:3168] type 00 class 0x060000
pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
pci 0000:00:0f.0: reg 0x10: [io 0xefe0-0xefe7]
pci 0000:00:0f.0: reg 0x14: [io 0xefac-0xefaf]
pci 0000:00:0f.0: reg 0x18: [io 0xefa0-0xefa7]
pci 0000:00:0f.0: reg 0x1c: [io 0xefa8-0xefab]
pci 0000:00:0f.0: reg 0x20: [io 0xef90-0xef9f]
pci 0000:00:0f.0: reg 0x24: [io 0xe800-0xe8ff]
pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
pci 0000:00:0f.1: reg 0x20: [io 0xfc00-0xfc0f]
pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 0x20: [io 0xeec0-0xeedf]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 0x20: [io 0xef00-0xef1f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.2: reg 0x20: [io 0xef20-0xef3f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: System wakeup disabled by ACPI
pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.3: reg 0x20: [io 0xef40-0xef5f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: System wakeup disabled by ACPI
pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
pci 0000:00:10.4: reg 0x10: [mem 0xdfe00000-0xdfe000ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
pci 0000:00:11.5: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:11.5: System wakeup disabled by ACPI
pci 0000:00:11.6: [1106:3068] type 00 class 0x078000
pci 0000:00:11.6: reg 0x10: [io 0x0000-0x00ff]
pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
pci 0000:00:12.0: reg 0x10: [io 0xe400-0xe4ff]
pci 0000:00:12.0: reg 0x14: [mem 0xdff00000-0xdff000ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:01:00.0: [1002:5960] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:01:00.0: reg 0x14: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xdfa00000-0xdfa0ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xdf900000-0xdf91ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:5940] type 00 class 0x038000
pci 0000:01:00.1: reg 0x10: [mem 0xc8000000-0xcfffffff pref]
pci 0000:01:00.1: reg 0x14: [mem 0xdf800000-0xdf80ffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xdf500000-0xdfafffff]
pci 0000:00:01.0: bridge window [mem 0xbf400000-0xdf3fffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x4ff30000-0x4fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: disabling [io 0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0072-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0080] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0084-0x0086] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0088] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0090-0x009f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
system 00:05: [io 0x0295-0x0296] has been reserved
system 00:05: [io 0x03e1-0x03e7] has been reserved
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x0800-0x087f] could not be reserved
system 00:05: [io 0x0400-0x041f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfff80000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0680-0x06ff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0x4ffeffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
Switched to clocksource acpi_pm
pci 0000:00:11.6: BAR 0: assigned [io 0x1000-0x10ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xdf500000-0xdfafffff]
pci 0000:00:01.0: bridge window [mem 0xbf400000-0xdf3fffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xdf500000-0xdfafffff]
pci_bus 0000:01: resource 2 [mem 0xbf400000-0xdf3fffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26960K (f4b48000 - f659c000)
microcode: CPU0 sig=0xf24, pf=0x4, revision=0x1e
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1413212585.063:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1733
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
agpgart: Detected VIA PT800 chipset
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:10.4: EHCI Host Controller
ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:10.4: irq 21, io mem 0xdfe00000
ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000eec0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000ef00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000ef20
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ef40
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
isapnp: No Plug & Play device found
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5682f337b8a0a17eef58c6ac5e9a85712c9208df'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:106:83
rtc_cmos 00:01: setting system clock to 2014-10-13 15:03:06 UTC (1413212586)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
Write protecting the kernel text: 6512k
Write protecting the kernel read-only data: 2756k
systemd-udevd[91]: starting version 204
sata_via 0000:00:0f.0: version 2.6
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xefe0 ctl 0xefac bmdma 0xef90 irq 20
ata2: SATA max UDMA/133 cmd 0xefa0 ctl 0xefa8 bmdma 0xef98 irq 20
pata_via 0000:00:0f.1: version 0.3.4
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xdff00000, 00:0e:a6:7f:ae:72, IRQ 23
via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[drm] Initialized drm 1.1.0 20060810
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata3.00: ATA-7: Maxtor 7L250R0, BAJ41G20, max UDMA/133
ata3.00: 490234752 sectors, multi 16: LBA48
ata3.01: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133
ata3.01: 240121728 sectors, multi 16: LBA
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/133
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 2399.922 MHz
scsi 2:0:0:0: Direct-Access ATA Maxtor 7L250R0 BAJ4 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 < sda5 >
scsi 2:0:1:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5
sd 2:0:1:0: [sdb] 240121728 512-byte logical blocks: (122 GB/114 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: Attached scsi generic sg1 type 0
sdb: sdb1
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:1:0: [sdb] Attached SCSI disk
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 300000) vs hw (d0000000 8000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x1002:0x5960).
[drm] register mmio base: 0xDFA00000
[drm] register mmio size: 65536
agpgart-via 0000:00:00.0: AGP 3.5 bridge
agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: GTT: 64M 0xE0000000 - 0xE3FFFFFF
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 256M 0x00000000D0000000 - 0x00000000DFFFFFFF (256M used)
[drm] Detected VRAM RAM=256M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 444128 kiB
[TTM] Zone highmem: Available graphics memory: 642372 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 64M of GTT memory ready.
radeon 0000:01:00.0: WB disabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0xf841e000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R200 Microcode
[drm] radeon: ring at 0x00000000E0001000
[drm] ring test succeeded in 0 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP1: INTERNAL_TMDS1
[drm] Connector 2:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 5185536
[drm] fb depth is 24
[drm] pitch is 5760
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33
ata4.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
ata4.00: configured for UDMA/33
ata4.01: configured for UDMA/33
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
usb 3-1: new low-speed USB device number 2 using uhci_hcd
sr 3:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
sr 3:0:1:0: Attached scsi CD-ROM sr1
sr 3:0:1:0: Attached scsi generic sg3 type 5
usb 3-1: New USB device found, idVendor=046d, idProduct=c05b
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input6
hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.1-1/input0
usb 3-2: new low-speed USB device number 3 using uhci_hcd
random: lvm urandom read with 111 bits of entropy available
bio: create slab at 1
random: nonblocking pool is initialized
usb 3-2: New USB device found, idVendor=1241, idProduct=1503
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Keyboard
usb 3-2: Manufacturer:
Switched to clocksource tsc
input: USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input7
hid-generic 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:10.1-2/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input8
hid-generic 0003:1241:1503.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:10.1-2/input1
usb 4-1: new full-speed USB device number 2 using uhci_hcd
usb 4-1: New USB device found, idVendor=07cc, idProduct=0200
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: SPRING-Rev1.1
usb 4-1: Manufacturer: ----- Ltd.
usb 4-1: SerialNumber: 101012183555
usb-storage 4-1:1.0: USB Mass Storage device detected
scsi4 : usb-storage 4-1:1.0
usbcore: registered new interface driver usb-storage
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
scsi 4:0:0:0: Direct-Access SPRING MultiCard Slot A 0100 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:1: Direct-Access SPRING MultiCard Slot D 0100 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:2: Direct-Access SPRING MultiCard Slot S 0100 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:3: Direct-Access SPRING MultiCard Slot M 0100 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:1: Attached scsi generic sg5 type 0
sd 4:0:0:2: Attached scsi generic sg6 type 0
sd 4:0:0:3: Attached scsi generic sg7 type 0
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:1: [sdd] Attached SCSI removable disk
sd 4:0:0:2: [sde] Attached SCSI removable disk
sd 4:0:0:3: [sdf] Attached SCSI removable disk
Adding 1306620k swap on /dev/mapper/mint--vg-swap_1. Priority:-1 extents:1 across:1306620k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-udevd[394]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
device-mapper: multipath: version 1.6.0 loaded
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
snd_via82xx_modem 0000:00:11.6: enabling device (0000 -> 0001)
init: failsafe main process (743) killed by TERM signal
snd_via82xx_modem: probe of 0000:00:11.6 failed with error -13
codec_read: codec 0 is not valid [0x107e5370]
codec_read: codec 0 is not valid [0x107e5370]
codec_read: codec 0 is not valid [0x107e5370]
codec_read: codec 0 is not valid [0x107e5370]
init: samba-ad-dc main process (839) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1595) terminated with status 1
perf samples too long (2536 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5024 > 5000), lowering kernel.perf_event_max_sample_rate to 25000