dmesg - blele

Return To blele System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-34-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 (Ubuntu 3.13.0-34.60-generic 3.13.11.4)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000df77ffff] usable
BIOS-e820: [mem 0x00000000df780000-0x00000000df7a2fff] ACPI NVS
BIOS-e820: [mem 0x00000000df7a3000-0x00000000df7dffff] ACPI data
BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000031f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. Z68AP-D3/Z68AP-D3, BIOS FD 03/20/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x31f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CCFFF write-protect
  CD000-CFFFF uncachable
  D0000-D2FFF write-protect
  D3000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 0E0000000 mask FE0000000 uncachable
  2 base 100000000 mask F00000000 write-back
  3 base 200000000 mask E00000000 write-back
  4 base 300000000 mask FE0000000 write-back
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 12GB, range: 512MB, type WB
total RAM covered: 15872M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 1G 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5ba0-0x000f5baf] mapped at [ffff8800000f5ba0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x31f600000-0x31f7fffff]
 [mem 0x31f600000-0x31f7fffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x31c000000-0x31f5fffff]
 [mem 0x31c000000-0x31f5fffff] page 2M
init_memory_mapping: [mem 0x300000000-0x31bffffff]
 [mem 0x300000000-0x31bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdf77ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xdf5fffff] page 2M
 [mem 0xdf600000-0xdf77ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
 [mem 0x100000000-0x2ffffffff] page 2M
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
RAMDISK: [mem 0x359e8000-0x36cebfff]
ACPI: RSDP 00000000000f7790 000014 (v00 GBT   )
ACPI: RSDT 00000000df7a3040 000050 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000df7a3100 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000df7a31c0 00503A (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
ACPI: FACS 00000000df780000 000040
ACPI: MSDM 00000000df7a8340 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000df7a8400 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000df7a8480 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: ASPT 00000000df7a8600 000034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
ACPI: SSPT 00000000df7a8640 002380 (v01 GBT    SsptHead 312E3042 UTBG 01010101)
ACPI: EUDS 00000000df7aa9c0 0000C0 (v01 GBT             00000000      00000000)
ACPI: TAMG 00000000df7aaa80 000A82 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC 00000000df7a8240 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000df7ab540 003E74 (v01  INTEL PPM RCM  80000001 INTL 20061109)
ACPI: MATS 00000000df7af3c0 00A74D (v01        MATS RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000031f7fffff]
Initmem setup node 0 [mem 0x00000000-0x31f7fffff]
  NODE_DATA [mem 0x31f7f1000-0x31f7f5fff]
 [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880312e00000-ffff88031edfffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x31f7fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009cfff]
  node   0: [mem 0x00100000-0xdf77ffff]
  node   0: [mem 0x100000000-0x31f7fffff]
On node 0 totalpages: 3141404
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 14238 pages used for memmap
  DMA32 zone: 911232 pages, LIFO batch:31
  Normal zone: 34784 pages used for memmap
  Normal zone: 2226176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdf780000-0xdf7a2fff]
PM: Registered nosave memory: [mem 0xdf7a3000-0xdf7dffff]
PM: Registered nosave memory: [mem 0xdf7e0000-0xdf7fffff]
PM: Registered nosave memory: [mem 0xdf800000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xdf800000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88031f400000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3092297
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12265884K/12565616K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 299732K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3410.212 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6820.42 BogoMIPS (lpj=13640848)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54563.39 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdf780000-0xdf7a2fff] (143360 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time:  1:19:27, date: 10/02/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xBC, should be 0xBB (20131115/tbprint-214)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xff00-0xff07]
pci 0000:00:1f.2: reg 0x14: [io  0xfe00-0xfe03]
pci 0000:00:1f.2: reg 0x18: [io  0xfd00-0xfd07]
pci 0000:00:1f.2: reg 0x1c: [io  0xfc00-0xfc03]
pci 0000:00:1f.2: reg 0x20: [io  0xfb00-0xfb1f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
pci 0000:01:00.0: [10de:1201] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf7ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xec000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xef00-0xef7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf9ffc000-0xf9ffffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [12d8:2404] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02-06]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbefffff 64bit pref]
pci 0000:03:01.0: [12d8:2404] type 01 class 0x060400
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:02.0: [12d8:2404] type 01 class 0x060400
pci 0000:03:02.0: supports D1 D2
pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:03.0: [12d8:2404] type 01 class 0x060400
pci 0000:03:03.0: supports D1 D2
pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-06]
pci 0000:02:00.0:   bridge window [io  0xc000-0xdfff]
pci 0000:02:00.0:   bridge window [mem 0xfbd00000-0xfbefffff 64bit pref]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xde00-0xdeff]
pci 0000:04:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PCI bridge to [bus 04]
pci 0000:03:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:03:01.0:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:03:02.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io  0xce00-0xceff]
pci 0000:06:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
pci 0000:06:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:03.0: PCI bridge to [bus 06]
pci 0000:03:03.0:   bridge window [io  0xc000-0xcfff]
pci 0000:03:03.0:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci 0000:07:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfbcf8000-0xfbcfffff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [io  0xbe00-0xbeff]
pci 0000:08:00.0: reg 0x18: [mem 0xfbbff000-0xfbbfffff 64bit pref]
pci 0000:08:00.0: reg 0x20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:09:00.0: [1283:8892] type 01 class 0x060400
pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdf780000-0xdfffffff]
e820: reserve RAM buffer [mem 0x31f800000-0x31fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0290-0x029f] has been reserved
system 00:00: [io  0x0800-0x0805] has been reserved
system 00:00: [io  0x0290-0x0294] has been reserved
system 00:00: [io  0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:09: [io  0x0400-0x04cf] could not be reserved
system 00:09: [io  0x04d2-0x04ff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [io  0x1000-0x107f] has been reserved
system 00:0a: [io  0x1080-0x10ff] has been reserved
system 00:0a: [io  0x1100-0x117f] has been reserved
system 00:0a: [io  0x1180-0x11ff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
system 00:0b: [io  0x0454-0x0457] has been reserved
system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0x000d2a00-0x000d3fff] has been reserved
system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0d: [mem 0xdf780000-0xdf7dffff] could not be reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0xdf77ffff] could not be reserved
system 00:0d: [mem 0xdf7e0000-0xdf7fffff] has been reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed8ffff] could not be reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
system 00:0d: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0d: [mem 0x40000000-0x400fffff] could not be reserved
system 00:0d: [mem 0xdf800000-0xdfffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 15 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe807ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:01.0: PCI bridge to [bus 04]
pci 0000:03:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:03:01.0:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:03:02.0: PCI bridge to [bus 05]
pci 0000:03:03.0: PCI bridge to [bus 06]
pci 0000:03:03.0:   bridge window [io  0xc000-0xcfff]
pci 0000:03:03.0:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03-06]
pci 0000:02:00.0:   bridge window [io  0xc000-0xdfff]
pci 0000:02:00.0:   bridge window [mem 0xfbd00000-0xfbefffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-06]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbefffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
pci 0000:00:1e.0: PCI bridge to [bus 0b]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xfbd00000-0xfbefffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xfbd00000-0xfbefffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:06: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:08: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:08: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0b: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0b: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:0b: resource 9 [mem 0xe0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19472K (ffff8800359e8000 - ffff880036cec000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdb780000-0xdf780000] (64MB) mapped at [ffff8800db780000-ffff8800df77ffff]
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xc
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xc
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xc
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xc
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0xc
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0xc
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0xc
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0xc
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1412212767.452:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 23994
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:03:01.0: irq 41 for MSI/MSI-X
pcieport 0000:03:02.0: irq 42 for MSI/MSI-X
pcieport 0000:03:03.0: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-34-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-34-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.0: irq 44 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-34-generic xhci_hcd
usb usb3: SerialNumber: 0000:07:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-34-generic xhci_hcd
usb usb4: SerialNumber: 0000:07:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 500bc5c87d4b115cf3c1504f7a92e233c6143d58'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 2:547:305
tty tty34: hash matches
rtc_cmos 00:03: setting system clock to 2014-10-02 01:19:28 UTC (1412212768)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[146]: starting version 204
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 45 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018a6000, 00:13:3b:0e:50:21, XID 0c900800 IRQ 45
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:06:00.0: irq 46 for MSI/MSI-X
r8169 0000:06:00.0 eth1: RTL8168evl/8111evl at 0xffffc90005b4a000, 00:13:3b:0e:50:22, XID 0c900800 IRQ 46
r8169 0000:06:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:08:00.0: irq 47 for MSI/MSI-X
r8169 0000:08:00.0 eth2: RTL8168evl/8111evl at 0xffffc90005b4c000, 50:e5:49:e6:26:fa, XID 0c900800 IRQ 47
r8169 0000:08:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 48
ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 48
ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 48
ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 48
ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 48
ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 48
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: MKNSSDCR120GB, 502ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      MKNSSDCR120GB    502A PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-2: new full-speed USB device number 2 using xhci_hcd
usb 3-2: New USB device found, idVendor=045e, idProduct=028e
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Controller
usb 3-2: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 3-2: SerialNumber: 1AB1F18
tsc: Refined TSC clocksource calibration: 3410.014 MHz
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
usb 4-1: New USB device found, idVendor=0bc2, idProduct=2320
usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-1: Product: Expansion
usb 4-1: Manufacturer: Seagate
usb 4-1: SerialNumber: NA41GL78
usb-storage 4-1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 4-1:1.0
usbcore: registered new interface driver usb-storage
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD1003FZEX-0 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-1.3: New USB device found, idVendor=0764, idProduct=0501
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: CRCA102*AF1
usb 1-1.3: Manufacturer: CP1500PFCLCD
usb 1-1.3: SerialNumber: CPS
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:0764:0501.0001: hiddev0,hidraw0: USB HID v1.10 Device [CP1500PFCLCD CRCA102*AF1] on usb-0000:00:1a.0-1.3/input0
usb 1-1.4: new low-speed USB device number 4 using ehci-pci
usb 1-1.4: New USB device found, idVendor=0461, idProduct=4d0f
usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.4: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3
hid-generic 0003:0461:4D0F.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.4/input0
usb 1-1.5: new full-speed USB device number 5 using ehci-pci
usb 1-1.5: New USB device found, idVendor=046d, idProduct=08af
usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: TSSTcorp CDDVDW TS-H653Z, 4303, max UDMA/33
ata3.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653Z  4303 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
ata4: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
scsi 6:0:0:0: Direct-Access     Seagate  Expansion        0608 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 4f 00 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 5 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 109 bits of entropy available
init: plymouth-upstart-bridge main process (232) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (241) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (245) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (247) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (249) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
systemd-udevd[373]: starting version 204
lp: driver loaded but no devices found
8021q: 802.1Q VLAN Support v1.8
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
random: nonblocking pool is initialized
[drm] Initialized drm 1.1.0 20060810
ppdev: user-space parallel port driver
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or  required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  343.22  Thu Sep 11 16:27:43 PDT 2014
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4004c601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000004
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x11/0x1e
   inputs:
     Rear Mic=0x18
     Front Mic=0x19
     Line=0x1a
     CD=0x1c
realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0889
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
lp0: using parport0 (interrupt-driven).
gpio_ich: GPIO from 180 to 255 on gpio_ich
type=1400 audit(1412212776.533:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=677 comm="apparmor_parser"
type=1400 audit(1412212776.533:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=677 comm="apparmor_parser"
type=1400 audit(1412212776.533:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=677 comm="apparmor_parser"
type=1400 audit(1412212776.533:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=678 comm="apparmor_parser"
type=1400 audit(1412212776.533:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser"
type=1400 audit(1412212776.533:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"
type=1400 audit(1412212776.533:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=677 comm="apparmor_parser"
type=1400 audit(1412212776.533:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=677 comm="apparmor_parser"
type=1400 audit(1412212776.533:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=679 comm="apparmor_parser"
type=1400 audit(1412212776.533:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=679 comm="apparmor_parser"
EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
ip_tables: (C) 2000-2006 Netfilter Core Team
Linux video capture interface: v2.00
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
gspca_main: v2.14.0 registered
gspca_main: gspca_zc3xx-2.14.0 probing 046d:08af
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb3/3-2/3-2:1.0/input/input9
usbcore: registered new interface driver xpad
intel_rapl: domain uncore energy ctr 0:0 not working, skip
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
r8169 0000:06:00.0 eth1: link down
r8169 0000:06:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0.10: link is not ready
u32 classifier
    Actions configured
Mirror/redirect action on
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: gspca_zc3xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/input/input14
usbcore: registered new interface driver gspca_zc3xx
init: udev-fallback-graphics main process (1468) terminated with status 1
r8169 0000:04:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0.10: link becomes ready
r8169 0000:06:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit_printk_skb: 33 callbacks suppressed
type=1400 audit(1412212788.829:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2004 comm="apparmor_parser"
type=1400 audit(1412212788.829:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=2004 comm="apparmor_parser"
type=1400 audit(1412212788.829:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2004 comm="apparmor_parser"
init: cups main process (2017) killed by HUP signal
init: cups main process ended, respawning
init: failsafe main process (1767) killed by TERM signal
type=1400 audit(1412212788.893:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/dhcpd" pid=2180 comm="apparmor_parser"
type=1400 audit(1412212788.893:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/named" pid=2181 comm="apparmor_parser"
type=1400 audit(1412212788.893:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2179 comm="apparmor_parser"
type=1400 audit(1412212788.893:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2179 comm="apparmor_parser"
type=1400 audit(1412212788.893:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2179 comm="apparmor_parser"
type=1400 audit(1412212788.893:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2174 comm="apparmor_parser"
type=1400 audit(1412212788.893:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=2174 comm="apparmor_parser"
nvidia 0000:01:00.0: irq 51 for MSI/MSI-X
init: plymouth-upstart-bridge main process ended, respawning
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x1f4 offMax=0x2140
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.16 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (3140) terminated with status 1
hda-codec: out of range cmd 3:5:707:ffffffbf
audit_printk_skb: 96 callbacks suppressed
type=1400 audit(1412212818.756:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4310 comm="apparmor_parser"
type=1400 audit(1412212818.756:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4310 comm="apparmor_parser"
type=1400 audit(1412212818.756:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4310 comm="apparmor_parser"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/drivers/usb/core/urb.c:336 usb_submit_urb+0x45b/0x470()
URB ffff880309225540 submitted while active
Modules linked in: xt_multiport pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) rfcomm bnep bluetooth ip_gre gre ip_tunnel snd_hda_codec_hdmi act_mirred cls_u32 sch_ingress sch_sfq sch_hfsc ifb iptable_mangle ipt_MASQUERADE xt_nat iptable_nat nf_nat_ipv4 nf_nat ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 joydev xpad ff_memless gspca_zc3xx gspca_main xt_conntrack nf_conntrack videodev iptable_filter ip_tables x_tables gpio_ich intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd snd_hda_intel snd_hda_codec serio_raw snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event lpc_ich snd_rawmidi shpchp snd_seq snd_seq_device nvidia(POF) snd_timer parport_pc snd drm ppdev mac_hid mei_me mei soundcore 8021q garp stp mrp llc lp parport hid_generic usbhid hid usb_storage ahci libahci r8169 mii
CPU: 0 PID: 0 Comm: swapper/0 Tainted: PF          O 3.13.0-34-generic #60-Ubuntu
Hardware name: Gigabyte Technology Co., Ltd. Z68AP-D3/Z68AP-D3, BIOS FD 03/20/2012
 0000000000000009 ffff88031f403cc0 ffffffff8171bd94 ffff88031f403d08
 ffff88031f403cf8 ffffffff810676cd ffff880309225540 ffff88030b530b08
 ffff88030b530800 ffff88031f403df0 000000000000ffff ffff88031f403d58
Call Trace:
   [] dump_stack+0x45/0x56
 [] warn_slowpath_common+0x7d/0xa0
 [] warn_slowpath_fmt+0x4c/0x50
 [] usb_submit_urb+0x45b/0x470
 [] ? sched_clock_cpu+0xb5/0x100
 [] xpad_play_effect+0x161/0x200 [xpad]
 [] ml_play_effects+0x102/0x600 [ff_memless]
 [] ? ml_ff_playback+0x100/0x100 [ff_memless]
 [] ml_effect_timer+0x3f/0x200 [ff_memless]
 [] call_timer_fn+0x36/0x100
 [] ? ml_ff_playback+0x100/0x100 [ff_memless]
 [] run_timer_softirq+0x1ef/0x2f0
 [] __do_softirq+0xec/0x2c0
 [] irq_exit+0x105/0x110
 [] smp_apic_timer_interrupt+0x45/0x60
 [] apic_timer_interrupt+0x6d/0x80
   [] ? cpuidle_enter_state+0x52/0xc0
 [] cpuidle_idle_call+0xb9/0x1f0
 [] arch_cpu_idle+0xe/0x30
 [] cpu_startup_entry+0xc5/0x290
 [] rest_init+0x77/0x80
 [] start_kernel+0x438/0x443
 [] ? repair_env_string+0x5c/0x5c
 [] ? early_idt_handlers+0x120/0x120
 [] x86_64_start_reservations+0x2a/0x2c
 [] x86_64_start_kernel+0x143/0x152
---[ end trace 89e1b6191a3aad03 ]---
perf samples too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

Return To blele System Information