dmesg - Initial
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable
BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved
BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Alienware M14xR1/M14xR1, BIOS A08 12/24/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-EFFFF write-protect
F0000-FFFFF write-combining
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 09D000000 mask FFF000000 uncachable
3 base 09E000000 mask FFE000000 uncachable
4 base 0FFC00000 mask FFFC00000 write-protect
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 240000000 mask FF0000000 write-back
8 base 250000000 mask FF0000000 write-back
9 base 25FE00000 mask FFFE00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x25fc00000-0x25fdfffff]
[mem 0x25fc00000-0x25fdfffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x25c000000-0x25fbfffff]
[mem 0x25c000000-0x25fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x25bffffff]
[mem 0x200000000-0x25bffffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x9ce3efff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x9cdfffff] page 2M
[mem 0x9ce00000-0x9ce3efff] page 4k
init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[mem 0x9cfff000-0x9cffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
RAMDISK: [mem 0x34920000-0x36487fff]
ACPI: RSDP 00000000000fe020 000024 (v02 ALWARE)
ACPI: XSDT 000000009cffe120 00009C (v01 ALWARE ALIENWRE 00000001 01000013)
ACPI: FACP 000000009cffa000 0000F4 (v04 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: DSDT 000000009cfee000 00884F (v01 ALWARE ALIENWRE 00000000 ASL 00040000)
ACPI: FACS 000000009cf6c000 000040
ACPI: SLIC 000000009cffd000 000176 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: OSFR 000000009cffc000 000074 (v01 ALWARE ALIENWRE 27D60B15 ASL 00040000)
ACPI: ASF! 000000009cffb000 0000A5 (v32 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: HPET 000000009cff9000 000038 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: APIC 000000009cff8000 00008C (v02 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: MCFG 000000009cff7000 00003C (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 000000009cfec000 001068 (v01 INSYDE INSYDE 00001000 MSFT 01000013)
ACPI: BOOT 000000009cfea000 000028 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 000000009cfe6000 0007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
ACPI: SSDT 000000009cfe5000 000996 (v01 PmRef CpuPm 00003000 INTL 20100121)
ACPI: DMAR 000000009cfe4000 0000E0 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 000000009cfdf000 004773 (v01 NvdRef NvdTabl 00001000 INTL 20100121)
ACPI: WDTT 000000009cfde000 000224 (v02 ALWARE ALIENWRE 00000001 ASL 01000013)
ACPI: ASPT 000000009cfe7000 000034 (v07 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
Initmem setup node 0 [mem 0x00000000-0x25fdfffff]
NODE_DATA [mem 0x25fdf5000-0x25fdf9fff]
[ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x25fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x9ce3efff]
node 0: [mem 0x9cfff000-0x9cffffff]
node 0: [mem 0x100000000-0x25fdfffff]
On node 0 totalpages: 2083804
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 9977 pages used for memmap
DMA32 zone: 638528 pages, LIFO batch:31
Normal zone: 22520 pages used for memmap
Normal zone: 1441280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9ce3f000-0x9cebefff]
PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88025fa00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2051087
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8091888K/8335216K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 243328K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2392.483 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4784.96 BogoMIPS (lpj=9569932)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x0000003e2e0000 end: 0x0000003e2fffff
dmar: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2: Thermal monitoring handled by SMI
CPU3: Thermal monitoring handled by SMI
CPU4: Thermal monitoring handled by SMI
CPU5: Thermal monitoring handled by SMI
CPU6: Thermal monitoring handled by SMI
CPU7: Thermal monitoring handled by SMI
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38279.72 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:41:27, date: 09/27/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000009ce90718 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 000000009ce91a98 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 000000009ce8fd98 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd2400000-0xd27fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x7000-0x703f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xda804000-0xda80400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xda800000-0xda803fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xda809000-0xda8093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x7088-0x708f]
pci 0000:00:1f.2: reg 0x14: [io 0x709c-0x709f]
pci 0000:00:1f.2: reg 0x18: [io 0x7080-0x7087]
pci 0000:00:1f.2: reg 0x1c: [io 0x7098-0x709b]
pci 0000:00:1f.2: reg 0x20: [io 0x7060-0x707f]
pci 0000:00:1f.2: reg 0x24: [mem 0xda808000-0xda8087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xda806000-0xda8060ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x7040-0x705f]
pci 0000:01:00.0: [10de:0dcd] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd1ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb3ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x6000-0x607f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd20fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb3ffffff 64bit pref]
pci 0000:07:00.0: [1969:1083] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xd9800000-0xd983ffff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0x5000-0x507f]
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xd9800000-0xda7fffff]
pci 0000:00:1c.0: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
pci 0000:0d:00.0: [168c:0030] type 00 class 0x028000
pci 0000:0d:00.0: reg 0x10: [mem 0xd8800000-0xd881ffff 64bit]
pci 0000:0d:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:0d:00.0: supports D1
pci 0000:0d:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.2: PCI bridge to [bus 0d-12]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xd8800000-0xd97fffff]
pci 0000:00:1c.2: bridge window [mem 0xd3800000-0xd47fffff 64bit pref]
pci 0000:13:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:13:00.0: reg 0x10: [mem 0xd7801000-0xd7801fff]
pci 0000:13:00.0: supports D1 D2
pci 0000:13:00.0: PME# supported from D1 D2 D3hot
pci 0000:13:00.1: [10ec:5209] type 00 class 0x080500
pci 0000:13:00.1: reg 0x10: [mem 0xd7800000-0xd78000ff]
pci 0000:13:00.1: supports D1 D2
pci 0000:13:00.1: PME# supported from D1 D2 D3hot
pci 0000:00:1c.3: PCI bridge to [bus 13-18]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xd7800000-0xd87fffff]
pci 0000:00:1c.3: bridge window [mem 0xd4800000-0xd57fffff 64bit pref]
pci 0000:19:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:19:00.0: reg 0x10: [mem 0xd6800000-0xd6801fff 64bit]
pci 0000:19:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 19-1e]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xd6800000-0xd77fffff]
pci 0000:00:1c.5: bridge window [mem 0xd5800000-0xd67fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 1f] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x9fa00000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0x0810-0x0813] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: [io 0xff2c-0xff2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs DLL0491 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs SMO8800 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:0d:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd2000000-0xd207ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd20fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb3ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xd9800000-0xda7fffff]
pci 0000:00:1c.0: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
pci 0000:0d:00.0: BAR 6: assigned [mem 0xd3800000-0xd380ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 0d-12]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xd8800000-0xd97fffff]
pci 0000:00:1c.2: bridge window [mem 0xd3800000-0xd47fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 13-18]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xd7800000-0xd87fffff]
pci 0000:00:1c.3: bridge window [mem 0xd4800000-0xd57fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 19-1e]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xd6800000-0xd77fffff]
pci 0000:00:1c.5: bridge window [mem 0xd5800000-0xd67fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 1f]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd20fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb3ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:07: resource 1 [mem 0xd9800000-0xda7fffff]
pci_bus 0000:07: resource 2 [mem 0xd2800000-0xd37fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:0d: resource 1 [mem 0xd8800000-0xd97fffff]
pci_bus 0000:0d: resource 2 [mem 0xd3800000-0xd47fffff 64bit pref]
pci_bus 0000:13: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:13: resource 1 [mem 0xd7800000-0xd87fffff]
pci_bus 0000:13: resource 2 [mem 0xd4800000-0xd57fffff 64bit pref]
pci_bus 0000:19: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:19: resource 1 [mem 0xd6800000-0xd77fffff]
pci_bus 0000:19: resource 2 [mem 0xd5800000-0xd67fffff 64bit pref]
pci_bus 0000:1f: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:1f: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:1f: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:1f: resource 7 [mem 0x9fa00000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28064K (ffff880034920000 - ffff880036488000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x98e3f000-0x9ce3f000] (64MB) mapped at [ffff880098e3f000-ffff88009ce3efff]
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1411843287.944:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15859
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: AC Adapter [ACAD] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xda809000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:19:00.0: xHCI Host Controller
xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 50 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb2: SerialNumber: 0000:19:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:19:00.0: xHCI Host Controller
xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:19:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:91:697
rtc_cmos 00:05: setting system clock to 2014-09-27 18:41:28 UTC (1411843288)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[146]: starting version 204
wmi: Mapper loaded
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtsx_pci 0000:13:00.0: irq 51 for MSI/MSI-X
rtsx_pci 0000:13:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 51
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1)
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:13:00.1: dummy supplies not allowed
mmc1: no vqmmc regulator found
sdhci-pci 0000:13:00.1: dummy supplies not allowed
mmc1: no vmmc regulator found
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc1: SDHCI controller on PCI [0000:13:00.1] using DMA
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
checking generic (c0000000 300000) vs hw (a0000000 10000000)
checking generic (c0000000 300000) vs hw (b0000000 4000000)
nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
atl1c 0000:07:00.0: version 1.0.1.1-NAPI
i915 0000:00:02.0: irq 52 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 2392.229 MHz
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-2: new low-speed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=04f3, idProduct=02f4
usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-2: Product: Nano Cordless Mouse
usb 2-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Nano Cordless Mouse as /devices/pci0000:00/0000:00:1c.5/0000:19:00.0/usb2/2-2/2-2:1.0/input/input4
hid-generic 0003:04F3:02F4.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [Nano Cordless Mouse] on usb-0000:19:00.0-2/input0
usb 1-1.2: new low-speed USB device number 3 using ehci-pci
usb 1-1.2: New USB device found, idVendor=04f3, idProduct=01a4
usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2: Product: 2.4G RF Keyboard & Mouse
input: 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
hid-generic 0003:04F3:01A4.0002: input,hidraw1: USB HID v1.10 Keyboard [2.4G RF Keyboard & Mouse] on usb-0000:00:1d.0-1.2/input0
input: 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input6
hid-generic 0003:04F3:01A4.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [2.4G RF Keyboard & Mouse] on usb-0000:00:1d.0-1.2/input1
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input7
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:39: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ahci 0000:00:1f.2: version 3.0
[drm] hdmi device not found 1 0 1
ahci 0000:00:1f.2: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c3680a1
nouveau [ DEVICE][0000:01:00.0] Chipset: GF106 (NVC3)
nouveau [ DEVICE][0000:01:00.0] Family : NVC0
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... signature not found
nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
nouveau [ VBIOS][0000:01:00.0] ... signature not found
nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
usb 1-1.3: new full-speed USB device number 4 using ehci-pci
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
usb 1-1.3: New USB device found, idVendor=413c, idProduct=8187
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: DW375 Bluetooth Module
usb 1-1.3: Manufacturer: Dell Computer Corp
usb 1-1.3: SerialNumber: 74DE2B99291E
usb 1-1.4: new high-speed USB device number 5 using ehci-pci
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xda808000 port 0xda808100 irq 53
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xda808000 port 0xda808200 irq 53
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6430
usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.4: Product: Laptop_Integrated_Webcam_2M
usb 1-1.4: Manufacturer: CN04MYKF72487192N3ZYA01
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 1-1.6: new full-speed USB device number 6 using ehci-pci
usb 1-1.6: New USB device found, idVendor=236a, idProduct=9220
usb 1-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.6: Product: AT91USBSerial
Switched to clocksource tsc
usb 1-1.7: new full-speed USB device number 7 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-1.7: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
usb 1-1.7: New USB device found, idVendor=187c, idProduct=0521
usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.7: Product: M14x
usb 1-1.7: Manufacturer: Alienware
usb 1-1.7: SerialNumber: 1.0.8
hid-generic 0003:187C:0521.0004: hiddev0,hidraw3: USB HID v1.01 Device [Alienware M14x] on usb-0000:00:1d.0-1.7/input0
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: WDC WD7500BPKT-22PK4T0, 01.01A01, max UDMA/133
ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from ACPI
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 70.06.29.00.16
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
nouveau [ VBIOS][0000:01:00.0] running init tables
scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
nouveau 0000:01:00.0: irq 54 for MSI/MSI-X
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau W[ PFB][0000:01:00.0][0x00000000][ffff88024e27b800] reclocking of this ram type unsupported
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 3072 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 880000uv
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 03: core 50 MHz memory 135 MHz
nouveau [ CLK][0000:01:00.0] 07: core 202 MHz memory 324 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 590 MHz memory 900 MHz
nouveau [ CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 4061434 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 3072 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02010362 00020010
nouveau [ DRM] DCB outp 01: 080213d6 0f220020
nouveau [ DRM] DCB outp 02: 08021392 00020020
nouveau [ DRM] DCB outp 03: 08032382 00020010
nouveau [ DRM] DCB conn 00: 00001061
nouveau [ DRM] DCB conn 01: 00202146
nouveau [ DRM] DCB conn 02: 00010261
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] ACPI backlight interface available, not registering our own
nouveau [ DRM] MM: using COPY0 for buffer copies
nouveau 0000:01:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133
ata3.00: configured for UDMA/133
nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff880035022800
nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
scsi 2:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N A101 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
random: nonblocking pool is initialized
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Adding 8333308k swap on /dev/sda6. Priority:-1 extents:1 across:8333308k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[415]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
mei_me 0000:00:16.0: irq 55 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPRD 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPRD 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPRD 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
usbcore: registered new interface driver btusb
snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90011240000, irq=18
hda_codec: ALC665: SKU not ready 0x598301f0
autoconfig: line_outs=2 (0x17/0x15/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=2 (0x1b/0x19/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x18
Internal Mic=0x12
realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
device-mapper: multipath: version 1.6.0 loaded
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
input: Dell WMI hotkeys as /devices/virtual/input/input14
Linux video capture interface: v2.00
cdc_acm 1-1.6:1.0: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-1.6:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6430)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
init: failsafe main process (721) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (793) killed by HUP signal
init: cups main process ended, respawning
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1659, fw id: 698563
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
atl1c 0000:07:00.0: irq 57 for MSI/MSI-X
init: samba-ad-dc main process (864) terminated with status 1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1450) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
UDF-fs: INFO Mounting volume 'TSimsM', timestamp 2011/02/16 18:46 (1f10)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
nouveau [ DRM] suspending display...
nouveau [ DRM] unpinning framebuffer(s)...
nouveau [ DRM] evicting buffers...
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: suspend of devices complete after 1705.422 msecs
PM: late suspend of devices complete after 0.126 msecs
pcieport 0000:00:1c.5: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.614 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
Broke affinity for irq 44
Broke affinity for irq 46
Broke affinity for irq 47
Broke affinity for irq 48
Broke affinity for irq 49
Broke affinity for irq 50
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
Broke affinity for irq 53
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
Broke affinity for irq 45
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
CPU4: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
CPU5: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
CPU6: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
pcieport 0000:00:1c.5: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 173.132 msecs
PM: early resume of devices complete after 0.105 msecs
mei_me 0000:00:16.0: irq 55 for MSI/MSI-X
nouveau [ DRM] re-enabling device...
nouveau [ DRM] resuming kernel object tree...
nouveau [ VBIOS][0000:01:00.0] running init tables
snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X
ath: phy0: ASPM enabled: 0x42
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
atl1c 0000:07:00.0: irq 57 for MSI/MSI-X
nouveau [ VOLT][0000:01:00.0] GPU voltage: 880000uv
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz
nouveau [ DRM] resuming client object trees...
nouveau [ DRM] resuming display...
usb 1-1.7: reset full-speed USB device number 7 using ehci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
usb 1-1.6: reset full-speed USB device number 6 using ehci-pci
usb 1-1.4: reset high-speed USB device number 5 using ehci-pci
usb 1-1.3: reset full-speed USB device number 4 using ehci-pci
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2954.561 msecs
PM: Finishing wakeup.
atl1c 0000:07:00.0: no hotplug settings from platform
ath9k 0000:0d:00.0: no hotplug settings from platform
rtsx_pci 0000:13:00.0: no hotplug settings from platform
sdhci-pci 0000:13:00.1: no hotplug settings from platform
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
nouveau [ DRM] suspending display...
nouveau [ DRM] unpinning framebuffer(s)...
nouveau [ DRM] evicting buffers...
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: suspend of devices complete after 1197.076 msecs
PM: late suspend of devices complete after 0.142 msecs
pcieport 0000:00:1c.5: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.802 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
CPU4: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
CPU5: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
CPU6: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
pcieport 0000:00:1c.5: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 173.074 msecs
PM: early resume of devices complete after 0.105 msecs
mei_me 0000:00:16.0: irq 55 for MSI/MSI-X
nouveau [ DRM] re-enabling device...
nouveau [ DRM] resuming kernel object tree...
nouveau [ VBIOS][0000:01:00.0] running init tables
snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X
ath: phy0: ASPM enabled: 0x42
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
atl1c 0000:07:00.0: irq 57 for MSI/MSI-X
nouveau [ VOLT][0000:01:00.0] GPU voltage: 880000uv
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz
nouveau [ DRM] resuming client object trees...
nouveau [ DRM] resuming display...
usb 1-1.3: reset full-speed USB device number 4 using ehci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
usb 1-1.6: reset full-speed USB device number 6 using ehci-pci
usb 1-1.7: reset full-speed USB device number 7 using ehci-pci
usb 1-1.4: reset high-speed USB device number 5 using ehci-pci
usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2844.504 msecs
PM: Finishing wakeup.
atl1c 0000:07:00.0: no hotplug settings from platform
Restarting tasks ... done.
ath9k 0000:0d:00.0: no hotplug settings from platform
rtsx_pci 0000:13:00.0: no hotplug settings from platform
sdhci-pci 0000:13:00.1: no hotplug settings from platform
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
systemd-hostnamed[3611]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-2: USB disconnect, device number 2
usb 2-1: new low-speed USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=04f3, idProduct=02f4
usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1: Product: Nano Cordless Mouse
usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Nano Cordless Mouse as /devices/pci0000:00/0000:00:1c.5/0000:19:00.0/usb2/2-1/2-1:1.0/input/input16
hid-generic 0003:04F3:02F4.0005: input,hiddev0,hidraw0: USB HID v1.11 Mouse [Nano Cordless Mouse] on usb-0000:19:00.0-1/input0
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: unable to enumerate USB device on port 1
usb 3-2: new SuperSpeed USB device number 6 using xhci_hcd
usb 3-2: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 3-2: New USB device found, idVendor=0480, idProduct=a006
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: External USB 3.0
usb 3-2: Manufacturer: Toshiba
usb 3-2: SerialNumber: 2012022930957
usb-storage 3-2:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
scsi 6:0:0:0: Direct-Access TOSHIBA External USB 3.0 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 33 00 00 08
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 3-2: reset SuperSpeed USB device number 6 using xhci_hcd
usb 3-2: Parent hub missing LPM exit latency info. Power management will be impacted.
xhci_hcd 0000:19:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880225f6be80
xhci_hcd 0000:19:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880225f6bec0
usb 3-2: Device not responding to set address.
usb 3-2: reset SuperSpeed USB device number 6 using xhci_hcd
usb 3-2: Parent hub missing LPM exit latency info. Power management will be impacted.
xhci_hcd 0000:19:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880225f6be80
xhci_hcd 0000:19:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880225f6bec0
sd 6:0:0:0: [sdb] Unhandled error code
sd 6:0:0:0: [sdb]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
sd 6:0:0:0: [sdb] CDB:
Read(10): 28 00 04 3b 5d 00 00 00 f0 00
end_request: I/O error, dev sdb, sector 70999296
usb 3-2: USB disconnect, device number 6
sd 6:0:0:0: [sdb] Unhandled error code
sd 6:0:0:0: [sdb]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 6:0:0:0: [sdb] CDB:
Read(10): 28 00 04 3b 5d f0 00 00 10 00
end_request: I/O error, dev sdb, sector 70999536
sd 6:0:0:0: [sdb] Unhandled error code
sd 6:0:0:0: [sdb]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 6:0:0:0: [sdb] CDB:
Read(10): 28 00 04 3b 5e 00 00 00 f0 00
end_request: I/O error, dev sdb, sector 70999552
usb 3-2: new SuperSpeed USB device number 7 using xhci_hcd
usb 3-2: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 3-2: New USB device found, idVendor=0480, idProduct=a006
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: External USB 3.0
usb 3-2: Manufacturer: Toshiba
usb 3-2: SerialNumber: 2012022930957
usb-storage 3-2:1.0: USB Mass Storage device detected
scsi7 : usb-storage 3-2:1.0
scsi 7:0:0:0: Direct-Access TOSHIBA External USB 3.0 0001 PQ: 0 ANSI: 6
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 33 00 00 08
sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc:
sd 7:0:0:0: [sdc] Attached SCSI disk
FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
FAT-fs (sdb): unable to read boot sector to mark fs as dirty
usb 3-2: USB disconnect, device number 7
sd 7:0:0:0: [sdc] Unhandled error code
sd 7:0:0:0: [sdc]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 7:0:0:0: [sdc] CDB:
Read(10): 28 00 04 67 a3 70 00 00 10 00
end_request: I/O error, dev sdc, sector 73900912
sd 7:0:0:0: [sdc] Unhandled error code
sd 7:0:0:0: [sdc]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 7:0:0:0: [sdc] CDB:
Read(10): 28 00 04 67 a3 80 00 00 f0 00
end_request: I/O error, dev sdc, sector 73900928
usb 2-1: USB disconnect, device number 3
usb 2-2: new low-speed USB device number 4 using xhci_hcd
usb 2-2: New USB device found, idVendor=04f3, idProduct=02f4
usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-2: Product: Nano Cordless Mouse
usb 2-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Nano Cordless Mouse as /devices/pci0000:00/0000:00:1c.5/0000:19:00.0/usb2/2-2/2-2:1.0/input/input17
hid-generic 0003:04F3:02F4.0006: input,hiddev0,hidraw0: USB HID v1.11 Mouse [Nano Cordless Mouse] on usb-0000:19:00.0-2/input0
usb 2-1: new high-speed USB device number 5 using xhci_hcd
usb 2-1: New USB device found, idVendor=0480, idProduct=a006
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: External USB 3.0
usb 2-1: Manufacturer: Toshiba
usb 2-1: SerialNumber: 2012022930957
usb 2-1: ep 0x81 - rounding interval to 16 microframes, ep desc says 20 microframes
usb 2-1: ep 0x2 - rounding interval to 16 microframes, ep desc says 20 microframes
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-1:1.0
scsi 8:0:0:0: Direct-Access TOSHIBA External USB 3.0 0001 PQ: 0 ANSI: 6
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 33 00 00 08
sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sd 8:0:0:0: [sdb] Attached SCSI disk
FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-1: USB disconnect, device number 5
usb 2-2: USB disconnect, device number 4
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 3-0:1.0: unable to enumerate USB device on port 1
usb 2-1: new low-speed USB device number 6 using xhci_hcd
usb 2-1: New USB device found, idVendor=04f3, idProduct=02f4
usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1: Product: Nano Cordless Mouse
usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Nano Cordless Mouse as /devices/pci0000:00/0000:00:1c.5/0000:19:00.0/usb2/2-1/2-1:1.0/input/input18
hid-generic 0003:04F3:02F4.0007: input,hiddev0,hidraw0: USB HID v1.11 Mouse [Nano Cordless Mouse] on usb-0000:19:00.0-1/input0
usb 3-2: new SuperSpeed USB device number 12 using xhci_hcd
usb 3-2: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 3-2: New USB device found, idVendor=0480, idProduct=a006
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: External USB 3.0
usb 3-2: Manufacturer: Toshiba
usb 3-2: SerialNumber: 2012022930957
usb-storage 3-2:1.0: USB Mass Storage device detected
scsi9 : usb-storage 3-2:1.0
usb 3-2: USB disconnect, device number 12
usb 3-2: new SuperSpeed USB device number 13 using xhci_hcd
usb 3-2: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 3-2: New USB device found, idVendor=0480, idProduct=a006
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: External USB 3.0
usb 3-2: Manufacturer: Toshiba
usb 3-2: SerialNumber: 2012022930957
usb-storage 3-2:1.0: USB Mass Storage device detected
scsi10 : usb-storage 3-2:1.0
scsi 10:0:0:0: Direct-Access TOSHIBA External USB 3.0 0001 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 33 00 00 08
sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sd 10:0:0:0: [sdb] Attached SCSI disk
FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 3-2: USB disconnect, device number 13
usb 3-2: device not accepting address 14, error -22
traps: cinnamon[2134] trap int3 ip:7f2cedf11c13 sp:7fffee92fb60 error:0
traps: cinnamon[4150] trap int3 ip:7fc48a8fec13 sp:7fff873f4560 error:0
traps: cinnamon[4217] trap int3 ip:7fb933523c13 sp:7fff7ff48320 error:0
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
PM: Marking nosave pages: [mem 0x9ce3f000-0x9cffefff]
PM: Marking nosave pages: [mem 0x9d000000-0xffffffff]
PM: Basic memory bitmaps created
PM: Preallocating image memory... done (allocated 1239740 pages)
PM: Allocated 4958960 kbytes in 0.71 seconds (6984.45 MB/s)
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
nouveau [ DRM] suspending display...
nouveau [ DRM] unpinning framebuffer(s)...
nouveau [ DRM] evicting buffers...
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: freeze of devices complete after 1571.787 msecs
PM: late freeze of devices complete after 0.121 msecs
PM: noirq freeze of devices complete after 1.077 msecs
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
Broke affinity for irq 23
Broke affinity for irq 44
Broke affinity for irq 49
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
Broke affinity for irq 16
Broke affinity for irq 43
Broke affinity for irq 45
Broke affinity for irq 46
Broke affinity for irq 47
Broke affinity for irq 48
Broke affinity for irq 50
Broke affinity for irq 53
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
PM: Creating hibernation image:
PM: Need to copy 613780 pages
PM: Normal pages needed: 613780 + 1024, available pages: 1469851
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
CPU4: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
CPU5: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
CPU6: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S4
PM: noirq restore of devices complete after 30.398 msecs
PM: early restore of devices complete after 0.092 msecs
usb usb1: root hub lost power or was reset
mei_me 0000:00:16.0: irq 55 for MSI/MSI-X
nouveau [ DRM] re-enabling device...
nouveau [ DRM] resuming kernel object tree...
nouveau [ VBIOS][0000:01:00.0] running init tables
ath: phy0: ASPM enabled: 0x42
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 50 for MSI/MSI-X
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
atl1c 0000:07:00.0: irq 57 for MSI/MSI-X
nouveau [ VOLT][0000:01:00.0] GPU voltage: 880000uv
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz
nouveau [ DRM] resuming client object trees...
nouveau [ DRM] resuming display...
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-1: reset high-speed USB device number 2 using ehci-pci
ata3.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
usb 2-1: reset low-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:19:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035566ac0
usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1.3: reset full-speed USB device number 4 using ehci-pci
usb 1-1.4: reset high-speed USB device number 5 using ehci-pci
usb 1-1.7: reset full-speed USB device number 7 using ehci-pci
usb 1-1.6: reset full-speed USB device number 6 using ehci-pci
usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
PM: restore of devices complete after 2013.326 msecs
PM: Image restored successfully.
PM: Basic memory bitmaps freed
atl1c 0000:07:00.0: no hotplug settings from platform
ath9k 0000:0d:00.0: no hotplug settings from platform
rtsx_pci 0000:13:00.0: no hotplug settings from platform
sdhci-pci 0000:13:00.1: no hotplug settings from platform
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
init: anacron main process (5043) killed by TERM signal
traps: cinnamon[4464] trap int3 ip:7f45d75d8c13 sp:7fff67fec440 error:0
systemd-hostnamed[5443]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: disassociated from 54:be:f7:c5:8e:b8 (Reason: 2)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: disassociated from 54:be:f7:c5:8e:b8 (Reason: 8)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: disassociated from 54:be:f7:c5:8e:b8 (Reason: 8)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: disassociated from 54:be:f7:c5:8e:b8 (Reason: 8)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: disassociated from 54:be:f7:c5:8e:b8 (Reason: 8)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=2)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: disassociated from 54:be:f7:c5:8e:b8 (Reason: 8)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: disassociated from 54:be:f7:c5:8e:b8 (Reason: 8)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
init: upstart-udev-bridge main process (408) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (621) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (755) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (10601) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (10605) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (10606) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (10649) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (10652) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (10655) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (12747) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (12751) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (12752) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: smbd main process (730) killed by TERM signal
init: irqbalance main process (1190) killed by TERM signal
init: upstart-udev-bridge main process (12771) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (12774) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (12776) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (22231) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (22236) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (22235) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: samba-ad-dc main process (24084) terminated with status 1
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 54:be:f7:c5:8e:b8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
nouveau [ DRM] suspending display...
nouveau [ DRM] unpinning framebuffer(s)...
nouveau [ DRM] evicting buffers...
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: suspend of devices complete after 1817.312 msecs
PM: late suspend of devices complete after 0.131 msecs
pcieport 0000:00:1c.5: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.634 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 18
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
Broke affinity for irq 44
Broke affinity for irq 50
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
Broke affinity for irq 45
Broke affinity for irq 46
Broke affinity for irq 47
Broke affinity for irq 48
Broke affinity for irq 49
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
CPU4: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
CPU5: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
CPU6: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
pcieport 0000:00:1c.5: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 173.013 msecs
PM: early resume of devices complete after 0.106 msecs
nouveau [ DRM] re-enabling device...
mei_me 0000:00:16.0: irq 55 for MSI/MSI-X
nouveau [ DRM] resuming kernel object tree...
nouveau [ VBIOS][0000:01:00.0] running init tables
snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
ath: phy0: ASPM enabled: 0x42
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
mei_me 0000:00:16.0: less data available than length=00000001.
xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS
xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
mei_me 0000:00:16.0: hbm: properties response: state mismatch, [1, 1]
xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS
xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 50 for MSI/MSI-X
mei_me 0000:00:16.0: hbm: start: state mismatch, [1, 3]
mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS
mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
mei_me 0000:00:16.0: reset failed
mei_me 0000:00:16.0: no destination client found 0x00000084
mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
mei_me 0000:00:16.0: reset failed
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
atl1c 0000:07:00.0: irq 57 for MSI/MSI-X
nouveau [ VOLT][0000:01:00.0] GPU voltage: 880000uv
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz
nouveau [ DRM] resuming client object trees...
nouveau [ DRM] resuming display...
usb 1-1: reset high-speed USB device number 2 using ehci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
usb 2-1: reset low-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:19:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035566ac0
usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
usb 1-1.3: reset full-speed USB device number 4 using ehci-pci
usb 1-1.4: reset high-speed USB device number 5 using ehci-pci
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 1-1.6: reset full-speed USB device number 6 using ehci-pci
usb 1-1.7: reset full-speed USB device number 7 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 3059.765 msecs
PM: Finishing wakeup.
atl1c 0000:07:00.0: no hotplug settings from platform
ath9k 0000:0d:00.0: no hotplug settings from platform
rtsx_pci 0000:13:00.0: no hotplug settings from platform
sdhci-pci 0000:13:00.1: no hotplug settings from platform
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
wlan0: authenticate with 54:be:f7:c5:8e:b8
wlan0: send auth to 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: authenticated
wlan0: associate with 54:be:f7:c5:8e:b8 (try 1/3)
wlan0: RX AssocResp from 54:be:f7:c5:8e:b8 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: US
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)