dmesg - ALLTEST01
Linux version 2.6.18-348.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jan 8 17:53:53 EST 2013
Command line: ro root=LABEL=/ console=tty0 console=ttyS1,115200
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009a000 (usable)
BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cd3c2000 (usable)
BIOS-e820: 00000000cd3c2000 - 00000000cd3c9000 (ACPI NVS)
BIOS-e820: 00000000cd3c9000 - 00000000dd948000 (usable)
BIOS-e820: 00000000dd948000 - 00000000dd9e5000 (reserved)
BIOS-e820: 00000000dd9e5000 - 00000000dd9fc000 (ACPI data)
BIOS-e820: 00000000dd9fc000 - 00000000ddb60000 (ACPI NVS)
BIOS-e820: 00000000ddb60000 - 00000000df7ff000 (reserved)
BIOS-e820: 00000000df7ff000 - 00000000df800000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000420000000 (usable)
DMI 2.7 present.
DMI: Quanta S910-X31E/S1E, BIOS S1E_3A12 03/28/2014
ACPI: RSDP (v002 ALASKA ) @ 0x00000000000f04a0
ACPI: XSDT (v001 ALASKA A M I 0x01072009 AMI 0x00010013) @ 0x00000000dd9e9098
ACPI: FADT (v005 ALASKA A M I 0x01072009 AMI 0x00010013) @ 0x00000000dd9f5b70
ACPI: MADT (v003 ALASKA A M I 0x01072009 AMI 0x00010013) @ 0x00000000dd9f5c80
ACPI: FPDT (v001 ALASKA A M I 0x01072009 AMI 0x00010013) @ 0x00000000dd9f5d18
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20120711) @ 0x00000000dd9f5d60
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20120711) @ 0x00000000dd9f62a0
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20120711) @ 0x00000000dd9f6d78
ACPI: SSDT (v001 PmRef ApTst 0x00003000 INTL 0x20120711) @ 0x00000000dd9f7058
ACPI: MCFG (v001 ALASKA A M I 0x01072009 MSFT 0x00000097) @ 0x00000000dd9f7418
ACPI: PRAD (v002 PRADID PRADTID 0x00000001 MSFT 0x03000001) @ 0x00000000dd9f7458
ACPI: HPET (v001 ALASKA A M I 0x01072009 AMI. 0x00000005) @ 0x00000000dd9f7518
ACPI: SSDT (v001 SataRe SataTabl 0x00001000 INTL 0x20120711) @ 0x00000000dd9f7550
ACPI: SSDT (v001 SaSsdt SaSsdt 0x00003000 INTL 0x20091112) @ 0x00000000dd9f78c0
ACPI: SPMI (v005 A M I OEMSPMI 0x00000000 AMI. 0x00000000) @ 0x00000000dd9fade8
ACPI: EINJ (v001 AMI AMI EINJ 0x00000000 0x00000000) @ 0x00000000dd9fae28
ACPI: ERST (v001 AMIER AMI ERST 0x00000000 0x00000000) @ 0x00000000dd9faf58
ACPI: HEST (v001 AMI AMI HEST 0x00000000 0x00000000) @ 0x00000000dd9fb188
ACPI: BERT (v001 AMI AMI BERT 0x00000000 0x00000000) @ 0x00000000dd9fb230
ACPI: DSDT (v002 ALASKA A M I 0x00000a12 INTL 0x20120711) @ 0x(null)
No NUMA configuration found
Faking a node at 0000000000000000-0000000420000000
Bootmem setup node 0 0000000000000000-0000000420000000
bootmap start 100000 pages 132
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Setting up node 0 0-420000
On node 0 totalpages: 4123610
DMA zone: 2400 pages, LIFO batch:0
DMA32 zone: 889210 pages, LIFO batch:31
Normal zone: 3232000 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:12 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 7:12 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Processor #4 7:12 APIC version 21
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Processor #6 7:12 APIC version 21
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
Processor #1 7:12 APIC version 21
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
Processor #3 7:12 APIC version 21
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
Processor #5 7:12 APIC version 21
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Processor #7 7:12 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a701 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009a000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 00000000cd3c2000 - 00000000cd3c9000
Nosave address range: 00000000dd948000 - 00000000dd9e5000
Nosave address range: 00000000dd9e5000 - 00000000dd9fc000
Nosave address range: 00000000dd9fc000 - 00000000ddb60000
Nosave address range: 00000000ddb60000 - 00000000df7ff000
Nosave address range: 00000000df800000 - 00000000f8000000
Nosave address range: 00000000f8000000 - 00000000fc000000
Nosave address range: 00000000fc000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec01000
Nosave address range: 00000000fec01000 - 00000000fed00000
Nosave address range: 00000000fed00000 - 00000000fed04000
Nosave address range: 00000000fed04000 - 00000000fed1c000
Nosave address range: 00000000fed1c000 - 00000000fed20000
Nosave address range: 00000000fed20000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ff000000
Nosave address range: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: df800000:18800000)
SMP: Allowing 8 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 4123610
Kernel command line: ro root=LABEL=/ console=tty0 console=ttyS1,115200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x285e000 - 0x685e000
Memory: 16400536k/17301504k available (2627k kernel code, 336536k reserved, 1677k data, 224k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.67 BogoMIPS (lpj=3392339)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
MCE: Machine Check Exception Reporting is disabled.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 6.235 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/8 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 6784.40 BogoMIPS (lpj=3392202)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 2/8 APIC 0x4
Initializing CPU#2
Calibrating delay using timer specific routine.. 6784.46 BogoMIPS (lpj=3392233)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 3/8 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 6784.23 BogoMIPS (lpj=3392117)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 4/8 APIC 0x1
Initializing CPU#4
Calibrating delay using timer specific routine.. 6783.92 BogoMIPS (lpj=3391962)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 5/8 APIC 0x3
Initializing CPU#5
Calibrating delay using timer specific routine.. 6784.08 BogoMIPS (lpj=3392042)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 6/8 APIC 0x5
Initializing CPU#6
Calibrating delay using timer specific routine.. 6784.43 BogoMIPS (lpj=3392217)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 7/8 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 6784.40 BogoMIPS (lpj=3392201)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz stepping 03
Brought up 8 CPUs
CPU#0: NMI watchdog performance counter calibration - 818->838
CPU#1: NMI watchdog performance counter calibration - 61->81
CPU#2: NMI watchdog performance counter calibration - 61->81
CPU#3: NMI watchdog performance counter calibration - 61->81
CPU#4: NMI watchdog performance counter calibration - 61->81
CPU#5: NMI watchdog performance counter calibration - 60->80
CPU#6: NMI watchdog performance counter calibration - 60->80
CPU#7: NMI watchdog performance counter calibration - 60->80
NMI watchdog testing PASSED.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 3392.339 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=1,39
checking if image is initramfs... it is
Freeing initrd memory: 2689k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
Warning: pci_mmcfg_init marking 256MB space uncacheable.
MCFG table requires 64MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on
PCI: Using MMCONFIG at f8000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:16.0: reg 10: [mem 0xf7c05000-0xf7c0500f 64bit]
pci 0000:00:16.1: reg 10: [mem 0xf7c04000-0xf7c0400f 64bit]
pci 0000:00:1d.0: reg 10: [mem 0xf7c02000-0xf7c023ff]
pci 0000:00:1f.3: reg 10: [mem 0xf7c01000-0xf7c010ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 14: [mem 0xf7a40000-0xf7a4ffff 64bit]
pci 0000:01:00.0: reg 1c: [mem 0xf7a00000-0xf7a3ffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xf7900000-0xf79fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7900000-0xf7afffff]
pci 0000:02:00.0: reg 10: [mem 0xf7b20000-0xf7b3ffff]
pci 0000:02:00.0: reg 18: [io 0xd020-0xd03f]
pci 0000:02:00.0: reg 1c: [mem 0xf7b44000-0xf7b47fff]
pci 0000:02:00.1: reg 10: [mem 0xf7b00000-0xf7b1ffff]
pci 0000:02:00.1: reg 18: [io 0xd000-0xd01f]
pci 0000:02:00.1: reg 1c: [mem 0xf7b40000-0xf7b43fff]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xf7000000-0xf78fffff]
pci 0000:04:00.0: reg 10: [mem 0xf7000000-0xf77fffff]
pci 0000:04:00.0: reg 14: [mem 0xf7800000-0xf781ffff]
pci 0000:04:00.0: reg 18: [io 0xc000-0xc07f]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:03:00.0: bridge window [mem 0xf7000000-0xf78fffff]
host bridge window [io 0x0000-0x0cf7] (ignored)
host bridge window [io 0x0d00-0xffff] (ignored)
host bridge window [mem 0x000a0000-0x000bffff] (ignored)
host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
host bridge window [mem 0x000dc000-0x000dffff] (ignored)
host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
host bridge window [mem 0xe0000000-0xfeafffff] (ignored)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 64-bit timers, 14318180 Hz
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:08: ioport range 0x1854-0x1857 has been reserved
system 00:0e: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0e: iomem range 0xfed10000-0xfed17fff has been reserved
system 00:0e: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:0e: iomem range 0xfed19000-0xfed19fff has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7900000-0xf7afffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:01.1: bridge window [mem pref disabled]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:03:00.0: bridge window [mem 0xf7000000-0xf78fffff]
pci 0000:03:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xf7000000-0xf78fffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
pci 0000:00:01.0: setting latency timer to 64
ACPI: PCI Interrupt 0000:00:01.1[A] -> GSI 16 (level, low) -> IRQ 169
pci 0000:00:01.1: setting latency timer to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
pci 0000:00:1c.0: setting latency timer to 64
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
pci 0000:03:00.0: setting latency timer to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1411470965.351:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 691B840A64868995
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:04:00.0
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.1: setting latency timer to 64
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Transitioning device [FAN0] to D3
ACPI: Transitioning device [FAN0] to D3
ACPI: Fan [FAN0] (off)
ACPI: Transitioning device [FAN1] to D3
ACPI: Transitioning device [FAN1] to D3
ACPI: Fan [FAN1] (off)
ACPI: Transitioning device [FAN2] to D3
ACPI: Transitioning device [FAN2] to D3
ACPI: Fan [FAN2] (off)
ACPI: Transitioning device [FAN3] to D3
ACPI: Transitioning device [FAN3] to D3
ACPI: Fan [FAN3] (off)
ACPI: Transitioning device [FAN4] to D3
ACPI: Transitioning device [FAN4] to D3
ACPI: Fan [FAN4] (off)
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: Processor [CPU0] (supports 16 throttling states)
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ ApIst] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ ApCst] [20060707]
ACPI: Processor [CPU1] (supports 16 throttling states)
ACPI: Processor [CPU2] (supports 16 throttling states)
ACPI: Processor [CPU3] (supports 16 throttling states)
ACPI: Processor [CPU4] (supports 16 throttling states)
ACPI: Processor [CPU5] (supports 16 throttling states)
ACPI: Processor [CPU6] (supports 16 throttling states)
ACPI: Processor [CPU7] (supports 16 throttling states)
ACPI: Thermal Zone [TZ00] (28 C)
ACPI: Thermal Zone [TZ01] (30 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 532k
GSI 17 sharing vector 0xD1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 209, io mem 0xf7c02000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
mpt2sas version 13.101.00.00 loaded
scsi0 : Fusion MPT SAS Host
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
mpt2sas 0000:01:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16403452 kB)
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 217
mpt2sas0-msix1: PCI-MSI-X enabled: IRQ 225
mpt2sas0-msix2: PCI-MSI-X enabled: IRQ 233
mpt2sas0-msix3: PCI-MSI-X enabled: IRQ 50
mpt2sas0-msix4: PCI-MSI-X enabled: IRQ 58
mpt2sas0-msix5: PCI-MSI-X enabled: IRQ 66
mpt2sas0-msix6: PCI-MSI-X enabled: IRQ 74
mpt2sas0-msix7: PCI-MSI-X enabled: IRQ 82
mpt2sas0: iomem(0x00000000f7a40000), mapped(0xffffc20000060000), size(65536)
mpt2sas0: ioport(0x000000000000e000), size(256)
mpt2sas0: sending diag reset !!
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
mpt2sas0: diag reset: SUCCESS
mpt2sas0: Allocated physical memory: size(15850 kB)
mpt2sas0: Current Controller Queue Depth(7929), Max Controller Queue Depth(8192)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2308: FWVersion(14.00.01.00), ChipRevision(0x05), BiosVersion(07.27.00.00)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x50016360009cac29), phys(8)
mpt2sas0: port enable: SUCCESS
Vendor: LSI Model: Logical Volume Rev: 3000
Type: Direct-Access ANSI SCSI revision: 06
scsi 0:1:0:0: RAID1: handle(0x0232), wwid(0x043b71c8d85f9e76), pd_count(2), type(SSP)
scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
SCSI device sda: 583983104 512-byte hdwr sectors (298999 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 08
SCSI device sda: drive cache: write through
SCSI device sda: 583983104 512-byte hdwr sectors (298999 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 08
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3
sd 0:1:0:0: Attached scsi disk sda
Vendor: TOSHIBA Model: AL13SEB300 Rev: 0101
Type: Direct-Access ANSI SCSI revision: 05
scsi 0:0:0:0: SSP: handle(0x0009), sas_addr(0x500003957801ec62), phy(2), device_name(0x500003957801ec61)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x50016360009cac29), slot(2)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
Vendor: TOSHIBA Model: AL13SEB300 Rev: 0101
Type: Direct-Access ANSI SCSI revision: 05
scsi 0:0:1:0: SSP: handle(0x000a), sas_addr(0x500003957818e08a), phy(3), device_name(0x500003957818e089)
scsi 0:0:1:0: SSP: enclosure_logical_id(0x50016360009cac29), slot(3)
scsi 0:0:1:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1411471005.839:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input0
dca service started, version 1.8
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
GSI 18 sharing vector 0x5A and IRQ 18
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 90
igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k1-1
igb: Copyright (c) 2007-2012 Intel Corporation.
GSI 19 sharing vector 0x62 and IRQ 19
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 98
igb 0000:02:00.0: setting latency timer to 64
igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session.
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 08:9e:01:e9:d4:00
igb 0000:02:00.0: eth0: PBA No: 105900-000
igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 18 (level, low) -> IRQ 90
igb 0000:02:00.1: setting latency timer to 64
igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 08:9e:01:e9:d4:01
igb 0000:02:00.1: eth1: PBA No: 105900-000
igb 0000:02:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
sd 0:1:0:0: Attached scsi generic sg0 type 0
scsi 0:0:0:0: Attached scsi generic sg1 type 0
scsi 0:0:1:0: Attached scsi generic sg2 type 0
floppy0: no floppy controllers found
work still pending
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
input: Video Bus as /class/input/input1
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4192956k swap on /dev/sda2. Priority:-1 extents:1 across:4192956k
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
8021q: adding VLAN 0 to HW filter on device eth0
usb 1-1.1: new low speed USB device using ehci_hcd and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
input: LiteOn Generic USB Keyboard as /class/input/input2
input,hidraw0: USB HID v1.00 Keyboard [LiteOn Generic USB Keyboard] on usb-0000:00:1d.0-1.1
input: LiteOn Generic USB Keyboard as /class/input/input3
input,hidraw0: USB HID v1.00 Device [LiteOn Generic USB Keyboard] on usb-0000:00:1d.0-1.1
usb 1-1.1: USB disconnect, address 3
usb 1-1.1: new low speed USB device using ehci_hcd and address 4
usb 1-1.1: configuration #1 chosen from 1 choice
input: LiteOn Generic USB Keyboard as /class/input/input4
input,hidraw0: USB HID v1.00 Keyboard [LiteOn Generic USB Keyboard] on usb-0000:00:1d.0-1.1
input: LiteOn Generic USB Keyboard as /class/input/input5
input,hidraw0: USB HID v1.00 Device [LiteOn Generic USB Keyboard] on usb-0000:00:1d.0-1.1
usb 1-1.1: USB disconnect, address 4