dmesg - 1
CPU0 microcode updated early to revision 0x1a, date = 2014-05-23
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.15-custom1-amd64 (alex@bootes) (gcc version 4.9.1 (Debian 4.9.1-11) ) #1 SMP PREEMPT Tue Sep 16 21:01:33 YEKT 2014
Command line: BOOT_IMAGE=/vmlinuz-3.14.15-custom1-amd64 root=/dev/mapper/vg0-root ro video=vesafb:ywrap vga=795 quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ba9cefff] usable
BIOS-e820: [mem 0x00000000ba9cf000-0x00000000ba9d5fff] ACPI NVS
BIOS-e820: [mem 0x00000000ba9d6000-0x00000000bba51fff] usable
BIOS-e820: [mem 0x00000000bba52000-0x00000000bbfdafff] reserved
BIOS-e820: [mem 0x00000000bbfdb000-0x00000000ce6f2fff] usable
BIOS-e820: [mem 0x00000000ce6f3000-0x00000000ce906fff] reserved
BIOS-e820: [mem 0x00000000ce907000-0x00000000ce9f2fff] ACPI NVS
BIOS-e820: [mem 0x00000000ce9f3000-0x00000000cf7fefff] reserved
BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z87X-UD5H/Z87X-UD5H-CF, BIOS F9 03/18/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 0220000000 mask 7FF8000000 write-back
3 base 0228000000 mask 7FFC000000 write-back
4 base 022C000000 mask 7FFE000000 write-back
5 base 022E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 base 00D0000000 mask 7FF0000000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0177c000, 0x0177cfff] PGTABLE
BRK [0x0177d000, 0x0177dfff] PGTABLE
BRK [0x0177e000, 0x0177efff] PGTABLE
init_memory_mapping: [mem 0x22ee00000-0x22effffff]
[mem 0x22ee00000-0x22effffff] page 2M
BRK [0x0177f000, 0x0177ffff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22edfffff]
[mem 0x22c000000-0x22edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
[mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xba9cefff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xba7fffff] page 2M
[mem 0xba800000-0xba9cefff] page 4k
init_memory_mapping: [mem 0xba9d6000-0xbba51fff]
[mem 0xba9d6000-0xba9fffff] page 4k
[mem 0xbaa00000-0xbb9fffff] page 2M
[mem 0xbba00000-0xbba51fff] page 4k
BRK [0x01780000, 0x01780fff] PGTABLE
init_memory_mapping: [mem 0xbbfdb000-0xce6f2fff]
[mem 0xbbfdb000-0xbbffffff] page 4k
[mem 0xbc000000-0xce5fffff] page 2M
[mem 0xce600000-0xce6f2fff] page 4k
BRK [0x01781000, 0x01781fff] PGTABLE
init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
[mem 0xcf7ff000-0xcf7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35f72000-0x36fb0fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000ce9c9080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ce9d50b8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000ce9c9190 00BF25 (v02 ALASKA A M I 000000F9 INTL 20091112)
ACPI: FACS 00000000ce9f1080 000040
ACPI: APIC 00000000ce9d51c8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ce9d5260 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000ce9d52a8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000ce9d57e8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MCFG 00000000ce9d62c0 00003C (v01 01072009 MSFT 00000097)
ACPI: HPET 00000000ce9d6300 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000ce9d6338 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000ce9d66a8 003299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 00000000ce9d9948 000080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: MATS 00000000ce9d99c8 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022effffff]
Initmem setup node 0 [mem 0x00000000-0x22effffff]
NODE_DATA [mem 0x22eff7000-0x22effafff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xba9cefff]
node 0: [mem 0xba9d6000-0xbba51fff]
node 0: [mem 0xbbfdb000-0xce6f2fff]
node 0: [mem 0xcf7ff000-0xcf7fffff]
node 0: [mem 0x100000000-0x22effffff]
On node 0 totalpages: 2085120
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13126 pages used for memmap
DMA32 zone: 840036 pages, LIFO batch:31
Normal zone: 19392 pages used for memmap
Normal zone: 1241088 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xba9cf000-0xba9d5fff]
PM: Registered nosave memory: [mem 0xbba52000-0xbbfdafff]
PM: Registered nosave memory: [mem 0xce6f3000-0xce906fff]
PM: Registered nosave memory: [mem 0xce907000-0xce9f2fff]
PM: Registered nosave memory: [mem 0xce9f3000-0xcf7fefff]
PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88022ec00000 s76224 r8192 d22080 u262144
pcpu-alloc: s76224 r8192 d22080 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2052517
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.14.15-custom1-amd64 root=/dev/mapper/vg0-root ro video=vesafb:ywrap vga=795 quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 8117924K/8340480K available (4289K kernel code, 539K rwdata, 1388K rodata, 828K init, 580K bss, 222556K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Dump stacks of tasks blocking RCU-preempt GP.
NR_IRQS:4352 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3399.762 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.52 BogoMIPS (lpj=3399762)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 16K (ffffffff816e5000 - ffffffff816e9000)
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000ce885000 end: 0x000000ce891fff
IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1 microcode updated early to revision 0x1a, date = 2014-05-23
#2[ 0.071182] CPU2 microcode updated early to revision 0x1a, date = 2014-05-23
#3
CPU3 microcode updated early to revision 0x1a, date = 2014-05-23
#4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54396.19 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xba9cf000-0xba9d5fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xce907000-0xce9f2fff] (966656 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000ce8fcc18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000ce8fc618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000ce8fbd98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf3620000-0xf362ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf363b000-0xf363b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf3600000-0xf361ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf3639000-0xf3639fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf3638000-0xf36383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf3630000-0xf3633fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf3637000-0xf36373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf3636000-0xf36367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf3635000-0xf36350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1004] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf3200000-0xf32fffff]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xf3300000-0xf3303fff]
pci 0000:03:00.0: reg 0x30: [mem 0xf3100000-0xf31fffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf33fffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf3500000-0xf35fffff]
pci 0000:05:00.0: [8086:244e] type 01 class 0x060401
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 05-06] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf3400000-0xf34fffff]
pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
pci 0000:06:00.0: [1131:7133] type 00 class 0x048000
pci 0000:06:00.0: reg 0x10: [mem 0xf3401000-0xf34017ff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:01.0: [1106:3044] type 00 class 0x0c0010
pci 0000:06:01.0: reg 0x10: [mem 0xf3400000-0xf34007ff]
pci 0000:06:01.0: reg 0x14: [io 0xb000-0xb07f]
pci 0000:06:01.0: supports D2
pci 0000:06:01.0: PME# supported from D2 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:05:00.0: bridge window [mem 0xf3400000-0xf34fffff]
pci 0000:05:00.0: bridge window [io 0xb000-0xbfff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0xf3400000-0xf34fffff] (subtractive decode)
pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xba9cf000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbba52000-0xbbffffff]
e820: reserve RAM buffer [mem 0xce6f3000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x1c00-0x1cfe] has been reserved
system 00:04: [io 0x1d00-0x1dfe] has been reserved
system 00:04: [io 0x1e00-0x1efe] has been reserved
system 00:04: [io 0x1f00-0x1ffe] has been reserved
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0a00-0x0a0f] has been reserved
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: [io 0x0a20-0x0a2f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:0c: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf33fffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf3500000-0xf35fffff]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:05:00.0: bridge window [mem 0xf3400000-0xf34fffff]
pci 0000:00:1c.6: PCI bridge to [bus 05-06]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf3400000-0xf34fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xe8000000-0xf30fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf33fffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf3500000-0xf35fffff]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xf3400000-0xf34fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 13 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xf3400000-0xf34fffff]
pci_bus 0000:06: resource 4 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 5 [mem 0xf3400000-0xf34fffff]
pci_bus 0000:06: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:06: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:06: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:06: resource 17 [mem 0xd0000000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 16636K (ffff880035f72000 - ffff880036fb1000)
DMAR: No ATSR found
IOMMU 0 0xfed90000: using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:1d.0 [0xce885000 - 0xce891fff]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xce885000 - 0xce891fff]
IOMMU: Setting identity map for device 0000:00:14.0 [0xce885000 - 0xce891fff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/pci/search.c:46 pci_find_upstream_pcie_bridge+0x61/0x90()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.15-custom1-amd64 #1
Hardware name: Gigabyte Technology Co., Ltd. Z87X-UD5H/Z87X-UD5H-CF, BIOS F9 03/18/2014
0000000000000009 ffffffff8142311e 0000000000000000 ffffffff81042e1d
ffff880224d4b098 ffff880224d4b000 ffff880224d4b098 ffffffff815fbcc0
ffff88022600c7e0 ffffffff8124a151 0000000000000000 ffffffff81314613
Call Trace:
[] ? dump_stack+0x49/0x6a
[] ? warn_slowpath_common+0x6d/0x90
[] ? pci_find_upstream_pcie_bridge+0x61/0x90
[] ? intel_iommu_add_device+0x43/0x210
[] ? bus_set_iommu+0x50/0x50
[] ? add_iommu_group+0x20/0x50
[] ? bus_for_each_dev+0x5b/0x90
[] ? bus_set_iommu+0x3e/0x50
[] ? intel_iommu_init+0xd87/0xde5
[] ? free_reserved_area+0x10f/0x120
[] ? memblock_find_dma_reserve+0x131/0x131
[] ? pci_iommu_init+0xe/0x37
[] ? do_one_initcall+0xea/0x140
[] ? parse_args+0x110/0x3a0
[] ? kernel_init_freeable+0x172/0x1f3
[] ? rest_init+0x80/0x80
[] ? kernel_init+0x5/0xe0
[] ? ret_from_fork+0x7c/0xb0
[] ? rest_init+0x80/0x80
---[ end trace 6669bc3059e9e7f4 ]---
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1a
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1a
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1411656125.383:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 16016
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: enabling device (0000 -> 0003)
simple-framebuffer simple-framebuffer.0: framebuffer at 0xf1000000, 0x500000 bytes, mapped to 0xffffc90004e80000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1280x1024x32, linelength=5120
Console: switching to colour frame buffer device 160x64
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
DCCP: Activated CCID 2 (TCP-like)
DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
Key type dns_resolver registered
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-09-25 14:42:05 UTC (1411656125)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 828K (ffffffff81616000 - ffffffff816e5000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
systemd-udevd[94]: starting version 208
random: systemd-udevd urandom read with 1 bits of entropy available
ACPI: Fan [FAN0] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ACPI: Fan [FAN1] (off)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
PTP clock support registered
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
dca service started, version 1.12.1
usbcore: registered new device driver usb
SCSI subsystem initialized
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
libata version 3.00 loaded.
AVX2 version of gcm_enc/dec engaged.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3638000
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.15-custom1-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3637000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.14.15-custom1-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.14.15-custom1-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.14.15-custom1-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3636000 port 0xf3636100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xf3636000 port 0xf3636180 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
dmar: DRHD: handling fault status reg 2
firewire_ohci 0000:06:01.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffff000
DMAR:[fault reason 02] Present bit in context entry is clear
firewire_ohci 0000:06:01.0: DMA context ARReq has stopped, error code: evt_unknown
firewire_ohci 0000:06:01.0: DMA context ARRsp has stopped, error code: evt_unknown
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Write] Request device [06:00.0] fault addr fffff000
DMAR:[fault reason 02] Present bit in context entry is clear
firewire_ohci 0000:06:01.0: bad self ID 0/1 (00000000 != ~00000000)
igb 0000:03:00.0: irq 45 for MSI/MSI-X
igb 0000:03:00.0: irq 46 for MSI/MSI-X
igb 0000:03:00.0: irq 47 for MSI/MSI-X
igb 0000:03:00.0: irq 48 for MSI/MSI-X
igb 0000:03:00.0: irq 49 for MSI/MSI-X
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 94:de:80:6b:1e:4e
igb 0000:03:00.0: eth0: PBA No: 000200-000
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
e1000e 0000:00:19.0 eth1: registered PHC clock
e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 94:de:80:6b:1e:50
e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: WDC WD10EZEX-75ZF5A0, 80.00A80, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-75Z 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
random: nonblocking pool is initialized
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-5: New USB device found, idVendor=045b, idProduct=0210
usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-6: New USB device found, idVendor=045b, idProduct=0210
usb 4-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-6:1.0: USB hub found
hub 4-6:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3399.997 MHz
usb 3-9: new high-speed USB device number 2 using xhci_hcd
bio: create slab at 1
raid6: sse2x1 11742 MB/s
raid6: sse2x2 15480 MB/s
raid6: sse2x4 18109 MB/s
raid6: avx2x1 24027 MB/s
usb 3-9: New USB device found, idVendor=045b, idProduct=0209
usb 3-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
raid6: avx2x2 27261 MB/s
raid6: avx2x4 32179 MB/s
raid6: using algorithm avx2x4 (32179 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 37896.000 MB/sec
bio: create slab at 2
Btrfs loaded
usb 3-10: new high-speed USB device number 3 using xhci_hcd
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-0): mounted filesystem with ordered data mode
usb 3-10: New USB device found, idVendor=045b, idProduct=0209
usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-10:1.0: USB hub found
hub 3-10:1.0: 4 ports detected
usb 3-9.1: new full-speed USB device number 5 using xhci_hcd
Switched to clocksource tsc
usb 3-9.1: New USB device found, idVendor=047f, idProduct=d955
usb 3-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9.1: Product: Plantronics Wireless Audio
usb 3-9.1: Manufacturer: Plantronics Wireless Audio
usb 3-9.1: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.2: new full-speed USB device number 6 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=0ac8, idProduct=305b
usb 3-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9.2: Product: PC Camera
usb 3-9.2: Manufacturer: Vimicro Corp.
usb 3-9.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.4: new full-speed USB device number 7 using xhci_hcd
systemd-udevd[451]: starting version 208
usb 3-9.4: New USB device found, idVendor=04cc, idProduct=1122
usb 3-9.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-9.4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9.4:1.0: USB hub found
hub 3-9.4:1.0: 2 ports detected
usb 3-10.3: new full-speed USB device number 8 using xhci_hcd
usb 3-10.3: New USB device found, idVendor=046d, idProduct=c066
usb 3-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-10.3: Product: G9x Laser Mouse
usb 3-10.3: Manufacturer: Logitech
usb 3-10.3: SerialNumber: 640B27E0080018
usb 3-13: new high-speed USB device number 9 using xhci_hcd
usb 3-13: New USB device found, idVendor=041e, idProduct=3f0a
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-13: Product: E-MU Tracker Pre | USB
usb 3-13: Manufacturer: E-MU Systems, Inc.
usb 3-13: SerialNumber: E-MU-53-3F0A-07DA0A08-10C9F-8730T2A
input: PC Speaker as /devices/platform/pcspkr/input/input1
wmi: Mapper loaded
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
systemd-udevd[503]: renamed network interface eth1 to rename3
systemd-udevd[491]: renamed network interface eth0 to eth1
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
systemd-udevd[503]: renamed network interface rename3 to eth0
media: Linux media interface: v0.10
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0, 2, 17 loaded
saa7133[0]: found at 0000:06:00.0, rev: 208, irq: 18, latency: 32, mmio: 0xf3401000
saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]
saa7133[0]: board init: gpio is 200c000
saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a0 ff 22 00 c2
saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff ff 0c 22 17 76 03 22 bd 73
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 0-004b: Tuner -1 found with type(s) Radio TV.
tda829x 0-004b: setting tuner address to 61
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
tda829x 0-004b: type set to tda8290+75a
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Plantronics Wireless Audio Plantronics Wireless Audio as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.3/0003:047F:D955.0001/input/input16
hid-generic 0003:047F:D955.0001: input,hiddev0,hidraw0: USB HID v1.01 Device [Plantronics Wireless Audio Plantronics Wireless Audio] on usb-0000:00:14.0-9.1/input3
input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.0/0003:046D:C066.0002/input/input17
hid-generic 0003:046D:C066.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech G9x Laser Mouse] on usb-0000:00:14.0-10.3/input0
input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.1/0003:046D:C066.0003/input/input18
hid-generic 0003:046D:C066.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech G9x Laser Mouse] on usb-0000:00:14.0-10.3/input1
usbcore: registered new interface driver snd-usb-audio
gspca_main: v2.14.0 registered
gspca_main: gspca_zc3xx-2.14.0 probing 0ac8:305b
Registered IR keymap rc-pinnacle-color
input: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0/input19
rc0: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0
ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-0/0-0047/ir0 [saa7133[0]]
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xf3401000 irq 18 registered as card -1
input: gspca_zc3xx as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/input/input20
usbcore: registered new interface driver gspca_zc3xx
EXT3-fs (dm-0): using internal journal
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
fuse init (API version 7.22)
loop: module loaded
scsi6 : vhba
it87: Found IT8728F chip at 0xa30, revision 1
it87: Beeping is supported
async_tx: api initialized (async)
md: raid10 personality registered for level 10
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: raid: Loading target version 1.5.2
md/raid1:mdX: active with 2 out of 2 mirrors
mdX: invalid bitmap file superblock: bad magic
created bitmap (499 pages) for device mdX
mdX: bitmap initialized from disk: read 32 pages, set 14 of 1021936 bits
Adding 2007036k swap on /dev/dm-1. Priority:-1 extents:1 across:2007036k
EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: barrier=1,commit=10
kjournald starting. Commit interval 10 seconds
EXT3-fs (dm-2): using internal journal
EXT3-fs (dm-2): mounted filesystem with ordered data mode
kjournald starting. Commit interval 10 seconds
EXT3-fs (dm-7): using internal journal
EXT3-fs (dm-7): mounted filesystem with ordered data mode
EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: barrier=1,commit=10
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input21
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff815fca00)
Bluetooth: Core ver 2.18
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd-logind[4372]: New seat seat0.
systemd-logind[4372]: Watching system buttons on /dev/input/event3 (Power Button)
systemd-logind[4372]: Watching system buttons on /dev/input/event2 (Power Button)
systemd-logind[4372]: Failed to start unit user@107.service: Unknown unit: user@107.service
systemd-logind[4372]: Failed to start user service: Unknown unit: user@107.service
systemd-logind[4372]: New session c1 of user Debian-console-log.
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x1b6 offMax=0x1b009
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.16 (interface 0x001a0007).
vboxpci: IOMMU found
systemd-logind[4372]: Failed to abandon scope session-c1.scope
systemd-logind[4372]: Failed to abandon session scope: No such interface 'org.freedesktop.systemd1.Scope' on object at path /org/freedesktop/systemd1/unit/session_2dc1_2escope
systemd-logind[4372]: New session c2 of user Debian-console-log.
systemd-logind[4372]: Failed to abandon scope session-c2.scope
systemd-logind[4372]: Failed to abandon session scope: No such interface 'org.freedesktop.systemd1.Scope' on object at path /org/freedesktop/systemd1/unit/session_2dc2_2escope
systemd-logind[4372]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[4372]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[4372]: New session c3 of user alex.
systemd-logind[4372]: New session c4 of user alex.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/W MODULE].
QNX4 filesystem 0.2.3 registered.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014
nvidia 0000:01:00.0: irq 51 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
dmar: DRHD: handling fault status reg 2
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
hda-codec: out of range cmd 0:6:707:ffffffbf
dmar: DRHD: handling fault status reg 2
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
it87 it87.2608: Mapping change disabled for safety reasons
vlc[11060]: segfault at 0 ip 00007f722d5dd99f sp 00007f7214ba4938 error 4 in libvaapi_plugin.so[7f722d5d9000+7000]
usb 3-13: USB disconnect, device number 9
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
usb 3-13: new high-speed USB device number 10 using xhci_hcd
usb 3-13: New USB device found, idVendor=041e, idProduct=3f0a
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-13: Product: E-MU Tracker Pre | USB
usb 3-13: Manufacturer: E-MU Systems, Inc.
usb 3-13: SerialNumber: E-MU-53-3F0A-07DA0A08-10C9F-8730T2A
dmar: DRHD: handling fault status reg 2
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 2
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
usb 3-13: USB disconnect, device number 10
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 2
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
hub 3-9:1.0: port 1 disabled by hub (EMI?), re-enabling...
usb 3-9.1: USB disconnect, device number 5
usb 3-9.1: new full-speed USB device number 11 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=047f, idProduct=d955
usb 3-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9.1: Product: Plantronics Wireless Audio
usb 3-9.1: Manufacturer: Plantronics Wireless Audio
usb 3-9.1: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Plantronics Wireless Audio Plantronics Wireless Audio as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.3/0003:047F:D955.0004/input/input22
hid-generic 0003:047F:D955.0004: input,hiddev0,hidraw0: USB HID v1.01 Device [Plantronics Wireless Audio Plantronics Wireless Audio] on usb-0000:00:14.0-9.1/input3
hda-codec: out of range cmd 0:7:707:ffffffbf
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
hda-codec: out of range cmd 0:4:707:ffffffbf
hda-codec: out of range cmd 0:5:707:ffffffbf
hda-codec: out of range cmd 0:6:707:ffffffbf
dmar: DRHD: handling fault status reg 2
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
systemd-logind[4372]: New session 2 of user alex.
systemd-logind[4372]: Failed to abandon scope session-2.scope
systemd-logind[4372]: Failed to abandon session scope: No such interface 'org.freedesktop.systemd1.Scope' on object at path /org/freedesktop/systemd1/unit/session_2d2_2escope
systemd-logind[4372]: New session 3 of user alex.
systemd-logind[4372]: Failed to abandon scope session-3.scope
systemd-logind[4372]: Failed to abandon session scope: No such interface 'org.freedesktop.systemd1.Scope' on object at path /org/freedesktop/systemd1/unit/session_2d3_2escope
systemd-logind[4372]: New session 4 of user alex.
systemd-logind[4372]: Failed to abandon scope session-4.scope
systemd-logind[4372]: Failed to abandon session scope: No such interface 'org.freedesktop.systemd1.Scope' on object at path /org/freedesktop/systemd1/unit/session_2d4_2escope
systemd-logind[4372]: New session 5 of user alex.
systemd-logind[4372]: Failed to abandon scope session-5.scope
systemd-logind[4372]: Failed to abandon session scope: No such interface 'org.freedesktop.systemd1.Scope' on object at path /org/freedesktop/systemd1/unit/session_2d5_2escope
systemd-logind[4372]: New session 6 of user alex.
systemd-logind[4372]: Failed to abandon scope session-6.scope
systemd-logind[4372]: Failed to abandon session scope: No such interface 'org.freedesktop.systemd1.Scope' on object at path /org/freedesktop/systemd1/unit/session_2d6_2escope
usb 3-13: new high-speed USB device number 12 using xhci_hcd
usb 3-13: New USB device found, idVendor=041e, idProduct=3f0a
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-13: Product: E-MU Tracker Pre | USB
usb 3-13: Manufacturer: E-MU Systems, Inc.
usb 3-13: SerialNumber: E-MU-53-3F0A-07DA0A08-10C9F-8730T2A
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
jack_mixer[15371]: segfault at 0 ip 00007f9152ef751e sp 00007f9151d0ee00 error 4 in jack_mixer_c.so[7f9152ef3000+a000]
systemd-logind[4372]: New session c5 of user alex.
xhci_hcd 0000:00:14.0: Signal while waiting for configure endpoint command
usb 3-9.1: Not enough bandwidth for altsetting 0
xhci_hcd 0000:00:14.0: Signal while waiting for configure endpoint command
usb 3-9.1: Not enough bandwidth for altsetting 0
systemd-logind[4372]: Failed to abandon scope session-c3.scope
systemd-logind[4372]: Failed to abandon session scope: No such interface 'org.freedesktop.systemd1.Scope' on object at path /org/freedesktop/systemd1/unit/session_2dc3_2escope
nvidia 0000:01:00.0: irq 51 for MSI/MSI-X
systemd-logind[4372]: Failed to abandon scope session-c5.scope
systemd-logind[4372]: Failed to abandon session scope: No such interface 'org.freedesktop.systemd1.Scope' on object at path /org/freedesktop/systemd1/unit/session_2dc5_2escope
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f80
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x1 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:1:1: usb_set_interface failed (-22)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f00
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x82 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:2:1: usb_set_interface failed (-22)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f80
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x1 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:1:1: usb_set_interface failed (-22)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f00
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x82 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:2:1: usb_set_interface failed (-22)
traps: akonadi_baloo_i[12902] general protection ip:7fbdc36af1f8 sp:7fff82b78d38 error:0 in libpthread-2.19.so[7fbdc369e000+18000]
traps: akonadi_baloo_i[12938] general protection ip:7f965c30d1f8 sp:7fffad828728 error:0 in libpthread-2.19.so[7f965c2fc000+18000]
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [06:00.0] fault addr fffbf000
DMAR:[fault reason 06] PTE Read access is not set
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f80
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x1 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:1:1: usb_set_interface failed (-22)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f00
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x82 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:2:1: usb_set_interface failed (-22)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f80
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x1 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:1:1: usb_set_interface failed (-22)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f00
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x82 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:2:1: usb_set_interface failed (-22)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f80
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x1 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:1:1: usb_set_interface failed (-22)
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801cd2d1f00
xhci_hcd 0000:00:14.0: Trying to add endpoint 0x82 without dropping it.
usb 3-9.1: Not enough bandwidth for altsetting 1
11:2:1: usb_set_interface failed (-22)