dmesg - IDEN1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-35-generic (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #62~precise1-Ubuntu SMP Mon Aug 18 14:52:04 UTC 2014 (Ubuntu 3.13.0-35.62~precise1-generic 3.13.11.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ca533fff] usable
BIOS-e820: [mem 0x00000000ca534000-0x00000000ca967fff] reserved
BIOS-e820: [mem 0x00000000ca968000-0x00000000ca977fff] ACPI data
BIOS-e820: [mem 0x00000000ca978000-0x00000000cb77ffff] ACPI NVS
BIOS-e820: [mem 0x00000000cb780000-0x00000000cca2ffff] reserved
BIOS-e820: [mem 0x00000000cca30000-0x00000000cca30fff] usable
BIOS-e820: [mem 0x00000000cca31000-0x00000000ccc36fff] ACPI NVS
BIOS-e820: [mem 0x00000000ccc37000-0x00000000cd081fff] usable
BIOS-e820: [mem 0x00000000cd082000-0x00000000cd7f2fff] reserved
BIOS-e820: [mem 0x00000000cd7f3000-0x00000000cd7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000042effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2002 02/26/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CD800000 mask FFFFFF800000 uncachable
4 base 0000CE000000 mask FFFFFE000000 uncachable
5 disabled
6 disabled
7 disabled
TOM2: 000000042f000000 aka 17136M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3288MB, range: 8MB, type UC
reg 4, base: 3296MB, range: 32MB, type UC
total RAM covered: 3288M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3288MB, range: 8MB, type UC
reg 4, base: 3296MB, range: 32MB, type UC
e820: update [mem 0xcd800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcd800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0x42ee00000-0x42effffff]
[mem 0x42ee00000-0x42effffff] page 2M
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x42c000000-0x42edfffff]
[mem 0x42c000000-0x42edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x42bffffff]
[mem 0x400000000-0x42bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xca533fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xca3fffff] page 2M
[mem 0xca400000-0xca533fff] page 4k
init_memory_mapping: [mem 0xcca30000-0xcca30fff]
[mem 0xcca30000-0xcca30fff] page 4k
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0xccc37000-0xcd081fff]
[mem 0xccc37000-0xccdfffff] page 4k
[mem 0xcce00000-0xccffffff] page 2M
[mem 0xcd000000-0xcd081fff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
init_memory_mapping: [mem 0xcd7f3000-0xcd7fffff]
[mem 0xcd7f3000-0xcd7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x3ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x34c68000-0x3662bfff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000ca96f070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ca976288 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000ca96f168 007119 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000cb77af80 000040
ACPI: APIC 00000000ca976398 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ca976438 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000ca976480 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000ca9764c0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 00000000ca976588 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: BGRT 00000000ca976550 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
Initmem setup node 0 [mem 0x00000000-0x42effffff]
NODE_DATA [mem 0x42eff5000-0x42eff9fff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e600000-ffff88042e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x42effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xca533fff]
node 0: [mem 0xcca30000-0xcca30fff]
node 0: [mem 0xccc37000-0xcd081fff]
node 0: [mem 0xcd7f3000-0xcd7fffff]
node 0: [mem 0x100001000-0x42effffff]
On node 0 totalpages: 4167977
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12903 pages used for memmap
DMA32 zone: 825741 pages, LIFO batch:31
Normal zone: 52160 pages used for memmap
Normal zone: 3338239 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xca534000-0xca967fff]
PM: Registered nosave memory: [mem 0xca968000-0xca977fff]
PM: Registered nosave memory: [mem 0xca978000-0xcb77ffff]
PM: Registered nosave memory: [mem 0xcb780000-0xcca2ffff]
PM: Registered nosave memory: [mem 0xcca31000-0xccc36fff]
PM: Registered nosave memory: [mem 0xcd082000-0xcd7f2fff]
PM: Registered nosave memory: [mem 0xcd800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xcd800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88042ec00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4102829
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c0000000
PM: Registered nosave memory: [mem 0xc0000000-0xc3ffffff]
Memory: 16234184K/16671908K available (7612K kernel code, 1138K rwdata, 3488K rodata, 1360K init, 1440K bss, 437724K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:1288 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4013.884 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8027.76 BogoMIPS (lpj=16055536)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cd800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e72000 - ffffffff81e7a000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 31488 entries in 124 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64222.14 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xca978000-0xcb77ffff] (14712832 bytes)
PM: Registering ACPI NVS region [mem 0xcca31000-0xccc36fff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 14:51:24, date: 09/06/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:02:00.0: reg 0x24: [mem 0xfe900000-0xfe9001ff]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [8086:150c] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe81ffff]
pci 0000:03:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfe820000-0xfe823fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfe600000-0xfe607fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 06]
pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:07:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:07:00.0: reg 0x10: [io 0xb050-0xb057]
pci 0000:07:00.0: reg 0x14: [io 0xb040-0xb043]
pci 0000:07:00.0: reg 0x18: [io 0xb030-0xb037]
pci 0000:07:00.0: reg 0x1c: [io 0xb020-0xb023]
pci 0000:07:00.0: reg 0x20: [io 0xb000-0xb01f]
pci 0000:07:00.0: reg 0x24: [mem 0xfe400000-0xfe4001ff]
pci 0000:00:0a.0: PCI bridge to [bus 07]
pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0a.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:0b.0: PCI bridge to [bus 08]
pci 0000:00:0d.0: PCI bridge to [bus 09]
pci 0000:00:14.4: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xca534000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcca31000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd082000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:09.0: PCI bridge to [bus 06]
pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:0a.0: PCI bridge to [bus 07]
pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0a.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:0b.0: PCI bridge to [bus 08]
pci 0000:00:0d.0: PCI bridge to [bus 09]
pci 0000:00:14.4: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:07: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0a: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0a: resource 10 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26384K (ffff880034c68000 - ffff88003662c000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c0000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1410015083.888:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31887
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011b80000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:04:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb8: SerialNumber: 0000:04:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb9: SerialNumber: 0000:04:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 87 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb10: SerialNumber: 0000:05:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb11: SerialNumber: 0000:05:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 12
xhci_hcd 0000:06:00.0: irq 88 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 89 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 90 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 91 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 92 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 93 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 94 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 95 for MSI/MSI-X
usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: xHCI Host Controller
usb usb12: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb12: SerialNumber: 0000:06:00.0
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 13
usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: Product: xHCI Host Controller
usb usb13: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb13: SerialNumber: 0000:06:00.0
hub 13-0:1.0: USB hub found
hub 13-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 3cd3204673e57957e2ed3f114700351849763662'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:292:889
hash matches /build/buildd/linux-lts-trusty-3.13.0/drivers/base/power/main.c:719
rtc_cmos 00:04: setting system clock to 2014-09-06 14:51:25 UTC (1410015085)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1360K (ffffffff81d1e000 - ffffffff81e72000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 568K (ffff880001772000 - ffff880001800000)
Freeing unused kernel memory: 608K (ffff880001b68000 - ffff880001c00000)
udevd[147]: starting version 175
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
wmi: Mapper loaded
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:03:00.0: irq 96 for MSI/MSI-X
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
ahci 0000:02:00.0: irq 97 for MSI/MSI-X
ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900100 irq 97
ata8: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900180 irq 97
ahci 0000:07:00.0: irq 98 for MSI/MSI-X
ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfe400000 port 0xfe400100 irq 98
ata10: SATA max UDMA/133 abar m512@0xfe400000 port 0xfe400180 irq 98
e1000e 0000:03:00.0 eth0: registered PHC clock
e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) ac:22:0b:4d:65:1e
e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0 eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
usb 4-2: new full-speed USB device number 2 using ohci-pci
ata7: SATA link down (SStatus 0 SControl 300)
usb 4-2: New USB device found, idVendor=046d, idProduct=c52b
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Receiver
usb 4-2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input2
input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input4
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:12.0-2:1
input: Logitech Unifying Device. Wireless PID:1017 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input5
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:12.0-2:2
tsc: Refined TSC clocksource calibration: 4013.469 MHz
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
ata5.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
ata5.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
ata5.00: configured for UDMA/133
ata2.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg2 type 0
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
ata6.00: ATAPI: PIONEER DVD-RW DVR-220, 1.01, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM PIONEER DVD-RW DVR-220 1.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg3 type 5
usb 12-2: new high-speed USB device number 2 using xhci_hcd
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 12-2: New USB device found, idVendor=eb1a, idProduct=2870
usb 12-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 12-2: Product: USB 2870 Device
ata8: SATA link down (SStatus 0 SControl 300)
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.00: ATA-7: ST3500630AS, 3.CHN, max UDMA/100
ata9.00: 976773168 sectors, multi 16: LBA48
ata9.00: configured for UDMA/100
scsi 8:0:0:0: Direct-Access ATA ST3500630AS 3.CH PQ: 0 ANSI: 5
sd 8:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 < sdd5 >
sd 8:0:0:0: [sdd] Attached SCSI disk
Switched to clocksource tsc
ata10: SATA link down (SStatus 0 SControl 300)
random: nonblocking pool is initialized
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (404) terminated with status 5
Adding 16670716k swap on /dev/sdd5. Priority:-1 extents:1 across:16670716k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[478]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (sdd1): re-mounted. Opts: errors=remount-ro
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
asus_wmi: ASUS WMI generic driver loaded
MCE: In-kernel MCE decoding enabled.
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
asus_wmi: Disabling ACPI video driver
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90011b5eb00). heartbeat=60 sec (nowayout=0)
Linux video capture interface: v2.00
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870, interface 0, class 0)
em28xx: Video interface 0 found: isoc
em28xx: DVB interface 0 found: isoc
em28xx: chip ID is em2870
SKU: Nid=0x1d sku_cfg=0x4007e629
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000e6
SKU: external_amp=0x5
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4007e629 for NID 0x1d
realtek: Enabling init ASM_ID=0xe629 CODEC_ID=10ec0899
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 99 for MSI/MSI-X
em2870 #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00
em2870 #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00
em2870 #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00
em2870 #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 e3 3b f9 47
em2870 #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2870 #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2870 #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
em2870 #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00
em2870 #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
em2870 #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2870 #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2870 #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2870 #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2870 #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2870 #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2870 #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2870 #0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0x843a43ce
em2870 #0: EEPROM info:
em2870 #0: No audio on board.
em2870 #0: 500mA max power
em2870 #0: Table at offset 0x04, strings=0x226a, 0x0000, 0x0000
em2870 #0: No sensor detected
hda-intel 0000:01:00.1: Enable sync_write for stable communication
em2870 #0: found i2c device @ 0xa0 on bus 0 [eeprom]
em2870 #0: found i2c device @ 0xc0 on bus 0 [tuner (analog)]
em2870 #0: Your board has no unique USB ID and thus need a hint to be detected.
em2870 #0: You may try to use card= insmod option to workaround that.
em2870 #0: Please send an email with this log to:
em2870 #0: V4L Mailing List
em2870 #0: Board eeprom hash is 0x843a43ce
em2870 #0: Board i2c devicelist hash is 0x4b800080
em2870 #0: Here is a list of valid choices for the card= insmod option:
em2870 #0: card=0 -> Unknown EM2800 video grabber
em2870 #0: card=1 -> Unknown EM2750/28xx video grabber
em2870 #0: card=2 -> Terratec Cinergy 250 USB
em2870 #0: card=3 -> Pinnacle PCTV USB 2
em2870 #0: card=4 -> Hauppauge WinTV USB 2
em2870 #0: card=5 -> MSI VOX USB 2.0
em2870 #0: card=6 -> Terratec Cinergy 200 USB
em2870 #0: card=7 -> Leadtek Winfast USB II
em2870 #0: card=8 -> Kworld USB2800
em2870 #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U
em2870 #0: card=10 -> Hauppauge WinTV HVR 900
em2870 #0: card=11 -> Terratec Hybrid XS
em2870 #0: card=12 -> Kworld PVR TV 2800 RF
em2870 #0: card=13 -> Terratec Prodigy XS
em2870 #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
em2870 #0: card=15 -> V-Gear PocketTV
em2870 #0: card=16 -> Hauppauge WinTV HVR 950
em2870 #0: card=17 -> Pinnacle PCTV HD Pro Stick
em2870 #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
em2870 #0: card=19 -> EM2860/SAA711X Reference Design
em2870 #0: card=20 -> AMD ATI TV Wonder HD 600
em2870 #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
em2870 #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
em2870 #0: card=23 -> Huaqi DLCW-130
em2870 #0: card=24 -> D-Link DUB-T210 TV Tuner
em2870 #0: card=25 -> Gadmei UTV310
em2870 #0: card=26 -> Hercules Smart TV USB 2.0
em2870 #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
em2870 #0: card=28 -> Leadtek Winfast USB II Deluxe
em2870 #0: card=29 -> EM2860/TVP5150 Reference Design
em2870 #0: card=30 -> Videology 20K14XUSB USB2.0
em2870 #0: card=31 -> Usbgear VD204v9
em2870 #0: card=32 -> Supercomp USB 2.0 TV
em2870 #0: card=33 -> Elgato Video Capture
em2870 #0: card=34 -> Terratec Cinergy A Hybrid XS
em2870 #0: card=35 -> Typhoon DVD Maker
em2870 #0: card=36 -> NetGMBH Cam
em2870 #0: card=37 -> Gadmei UTV330
em2870 #0: card=38 -> Yakumo MovieMixer
em2870 #0: card=39 -> KWorld PVRTV 300U
em2870 #0: card=40 -> Plextor ConvertX PX-TV100U
em2870 #0: card=41 -> Kworld 350 U DVB-T
em2870 #0: card=42 -> Kworld 355 U DVB-T
em2870 #0: card=43 -> Terratec Cinergy T XS
em2870 #0: card=44 -> Terratec Cinergy T XS (MT2060)
em2870 #0: card=45 -> Pinnacle PCTV DVB-T
em2870 #0: card=46 -> Compro, VideoMate U3
em2870 #0: card=47 -> KWorld DVB-T 305U
em2870 #0: card=48 -> KWorld DVB-T 310U
em2870 #0: card=49 -> MSI DigiVox A/D
em2870 #0: card=50 -> MSI DigiVox A/D II
em2870 #0: card=51 -> Terratec Hybrid XS Secam
em2870 #0: card=52 -> DNT DA2 Hybrid
em2870 #0: card=53 -> Pinnacle Hybrid Pro
em2870 #0: card=54 -> Kworld VS-DVB-T 323UR
em2870 #0: card=55 -> Terratec Cinnergy Hybrid T USB XS (em2882)
em2870 #0: card=56 -> Pinnacle Hybrid Pro (330e)
em2870 #0: card=57 -> Kworld PlusTV HD Hybrid 330
em2870 #0: card=58 -> Compro VideoMate ForYou/Stereo
em2870 #0: card=59 -> (null)
em2870 #0: card=60 -> Hauppauge WinTV HVR 850
em2870 #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
em2870 #0: card=62 -> Gadmei TVR200
em2870 #0: card=63 -> Kaiomy TVnPC U2
em2870 #0: card=64 -> Easy Cap Capture DC-60
em2870 #0: card=65 -> IO-DATA GV-MVP/SZ
em2870 #0: card=66 -> Empire dual TV
em2870 #0: card=67 -> Terratec Grabby
em2870 #0: card=68 -> Terratec AV350
em2870 #0: card=69 -> KWorld ATSC 315U HDTV TV Box
em2870 #0: card=70 -> Evga inDtube
em2870 #0: card=71 -> Silvercrest Webcam 1.3mpix
em2870 #0: card=72 -> Gadmei UTV330+
em2870 #0: card=73 -> Reddo DVB-C USB TV Box
em2870 #0: card=74 -> Actionmaster/LinXcel/Digitus VC211A
em2870 #0: card=75 -> Dikom DK300
em2870 #0: card=76 -> KWorld PlusTV 340U or UB435-Q (ATSC)
em2870 #0: card=77 -> EM2874 Leadership ISDBT
em2870 #0: card=78 -> PCTV nanoStick T2 290e
em2870 #0: card=79 -> Terratec Cinergy H5
em2870 #0: card=80 -> PCTV DVB-S2 Stick (460e)
em2870 #0: card=81 -> Hauppauge WinTV HVR 930C
em2870 #0: card=82 -> Terratec Cinergy HTC Stick
em2870 #0: card=83 -> Honestech Vidbox NW03
em2870 #0: card=84 -> MaxMedia UB425-TC
em2870 #0: card=85 -> PCTV QuatroStick (510e)
em2870 #0: card=86 -> PCTV QuatroStick nano (520e)
em2870 #0: card=87 -> Terratec Cinergy HTC USB XS
em2870 #0: card=88 -> C3 Tech Digital Duo HDTV/SDTV USB
em2870 #0: card=89 -> Delock 61959
em2870 #0: card=90 -> KWorld USB ATSC TV Stick UB435-Q V2
em2870 #0: Board not discovered
em2870 #0: Identified as Unknown EM2750/28xx video grabber (card=1)
em2870 #0: Your board has no unique USB ID and thus need a hint to be detected.
em2870 #0: You may try to use card= insmod option to workaround that.
em2870 #0: Please send an email with this log to:
em2870 #0: V4L Mailing List
em2870 #0: Board eeprom hash is 0x843a43ce
em2870 #0: Board i2c devicelist hash is 0x4b800080
em2870 #0: Here is a list of valid choices for the card= insmod option:
em2870 #0: card=0 -> Unknown EM2800 video grabber
em2870 #0: card=1 -> Unknown EM2750/28xx video grabber
em2870 #0: card=2 -> Terratec Cinergy 250 USB
em2870 #0: card=3 -> Pinnacle PCTV USB 2
em2870 #0: card=4 -> Hauppauge WinTV USB 2
em2870 #0: card=5 -> MSI VOX USB 2.0
em2870 #0: card=6 -> Terratec Cinergy 200 USB
em2870 #0: card=7 -> Leadtek Winfast USB II
em2870 #0: card=8 -> Kworld USB2800
em2870 #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U
em2870 #0: card=10 -> Hauppauge WinTV HVR 900
em2870 #0: card=11 -> Terratec Hybrid XS
em2870 #0: card=12 -> Kworld PVR TV 2800 RF
em2870 #0: card=13 -> Terratec Prodigy XS
em2870 #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
em2870 #0: card=15 -> V-Gear PocketTV
em2870 #0: card=16 -> Hauppauge WinTV HVR 950
em2870 #0: card=17 -> Pinnacle PCTV HD Pro Stick
em2870 #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
em2870 #0: card=19 -> EM2860/SAA711X Reference Design
em2870 #0: card=20 -> AMD ATI TV Wonder HD 600
em2870 #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
em2870 #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
em2870 #0: card=23 -> Huaqi DLCW-130
em2870 #0: card=24 -> D-Link DUB-T210 TV Tuner
em2870 #0: card=25 -> Gadmei UTV310
em2870 #0: card=26 -> Hercules Smart TV USB 2.0
em2870 #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
em2870 #0: card=28 -> Leadtek Winfast USB II Deluxe
em2870 #0: card=29 -> EM2860/TVP5150 Reference Design
em2870 #0: card=30 -> Videology 20K14XUSB USB2.0
em2870 #0: card=31 -> Usbgear VD204v9
em2870 #0: card=32 -> Supercomp USB 2.0 TV
em2870 #0: card=33 -> Elgato Video Capture
em2870 #0: card=34 -> Terratec Cinergy A Hybrid XS
em2870 #0: card=35 -> Typhoon DVD Maker
em2870 #0: card=36 -> NetGMBH Cam
em2870 #0: card=37 -> Gadmei UTV330
em2870 #0: card=38 -> Yakumo MovieMixer
em2870 #0: card=39 -> KWorld PVRTV 300U
em2870 #0: card=40 -> Plextor ConvertX PX-TV100U
em2870 #0: card=41 -> Kworld 350 U DVB-T
em2870 #0: card=42 -> Kworld 355 U DVB-T
em2870 #0: card=43 -> Terratec Cinergy T XS
em2870 #0: card=44 -> Terratec Cinergy T XS (MT2060)
em2870 #0: card=45 -> Pinnacle PCTV DVB-T
em2870 #0: card=46 -> Compro, VideoMate U3
em2870 #0: card=47 -> KWorld DVB-T 305U
em2870 #0: card=48 -> KWorld DVB-T 310U
em2870 #0: card=49 -> MSI DigiVox A/D
em2870 #0: card=50 -> MSI DigiVox A/D II
em2870 #0: card=51 -> Terratec Hybrid XS Secam
em2870 #0: card=52 -> DNT DA2 Hybrid
em2870 #0: card=53 -> Pinnacle Hybrid Pro
em2870 #0: card=54 -> Kworld VS-DVB-T 323UR
em2870 #0: card=55 -> Terratec Cinnergy Hybrid T USB XS (em2882)
em2870 #0: card=56 -> Pinnacle Hybrid Pro (330e)
em2870 #0: card=57 -> Kworld PlusTV HD Hybrid 330
em2870 #0: card=58 -> Compro VideoMate ForYou/Stereo
em2870 #0: card=59 -> (null)
em2870 #0: card=60 -> Hauppauge WinTV HVR 850
em2870 #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
em2870 #0: card=62 -> Gadmei TVR200
em2870 #0: card=63 -> Kaiomy TVnPC U2
em2870 #0: card=64 -> Easy Cap Capture DC-60
em2870 #0: card=65 -> IO-DATA GV-MVP/SZ
em2870 #0: card=66 -> Empire dual TV
em2870 #0: card=67 -> Terratec Grabby
em2870 #0: card=68 -> Terratec AV350
em2870 #0: card=69 -> KWorld ATSC 315U HDTV TV Box
em2870 #0: card=70 -> Evga inDtube
em2870 #0: card=71 -> Silvercrest Webcam 1.3mpix
em2870 #0: card=72 -> Gadmei UTV330+
em2870 #0: card=73 -> Reddo DVB-C USB TV Box
em2870 #0: card=74 -> Actionmaster/LinXcel/Digitus VC211A
em2870 #0: card=75 -> Dikom DK300
em2870 #0: card=76 -> KWorld PlusTV 340U or UB435-Q (ATSC)
em2870 #0: card=77 -> EM2874 Leadership ISDBT
em2870 #0: card=78 -> PCTV nanoStick T2 290e
em2870 #0: card=79 -> Terratec Cinergy H5
em2870 #0: card=80 -> PCTV DVB-S2 Stick (460e)
em2870 #0: card=81 -> Hauppauge WinTV HVR 930C
em2870 #0: card=82 -> Terratec Cinergy HTC Stick
em2870 #0: card=83 -> Honestech Vidbox NW03
em2870 #0: card=84 -> MaxMedia UB425-TC
em2870 #0: card=85 -> PCTV QuatroStick (510e)
em2870 #0: card=86 -> PCTV QuatroStick nano (520e)
em2870 #0: card=87 -> Terratec Cinergy HTC USB XS
em2870 #0: card=88 -> C3 Tech Digital Duo HDTV/SDTV USB
em2870 #0: card=89 -> Delock 61959
em2870 #0: card=90 -> KWorld USB ATSC TV Stick UB435-Q V2
em2870 #0: v4l2 driver version 0.2.0
em2870 #0: V4L2 video device registered as video0
em2870 #0: analog set to isoc mode.
em2870 #0: dvb set to isoc mode.
usbcore: registered new interface driver em28xx
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
type=1400 audit(1410015097.870:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=681 comm="apparmor_parser"
type=1400 audit(1410015097.870:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser"
type=1400 audit(1410015097.870:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser"
type=1400 audit(1410015097.870:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=713 comm="apparmor_parser"
type=1400 audit(1410015097.870:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=713 comm="apparmor_parser"
type=1400 audit(1410015097.870:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=713 comm="apparmor_parser"
type=1400 audit(1410015097.870:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser"
type=1400 audit(1410015097.870:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser"
type=1400 audit(1410015097.870:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=713 comm="apparmor_parser"
type=1400 audit(1410015097.870:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=713 comm="apparmor_parser"
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 15573 MBytes.
[fglrx] vendor: 1002 device: 6798 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.20.7 [May 29 2014] with 1 minors
init: failsafe main process (870) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: kdm main process (1101) killed by TERM signal
e1000e 0000:03:00.0: irq 96 for MSI/MSI-X
e1000e 0000:03:00.0: irq 96 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: IDENTIFY DEVICE
ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/00 tag 24 pio 512 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: hard resetting link
fglrx_pci 0000:01:00.0: irq 100 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1251
[fglrx] Firegl kernel thread PID: 1252
[fglrx] Firegl kernel thread PID: 1253
[fglrx] IRQ 100 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f838000, size:4000
[fglrx] Reserved FB block: Unshared offset:f83c000, size:4c4000
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[fglrx] Reserved FB block: Unshared offset:bfff4000, size:c000
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
audit_printk_skb: 186 callbacks suppressed
type=1400 audit(1410015450.737:74): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1035 comm="cupsd" capability=36 capname="block_suspend"
type=1400 audit(1410016296.509:75): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1035 comm="cupsd" capability=36 capname="block_suspend"
type=1400 audit(1410017976.567:76): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1035 comm="cupsd" capability=36 capname="block_suspend"