dmesg - bzip2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000099e62fff] usable
BIOS-e820: [mem 0x0000000099e63000-0x0000000099e69fff] ACPI NVS
BIOS-e820: [mem 0x0000000099e6a000-0x000000009a2c2fff] usable
BIOS-e820: [mem 0x000000009a2c3000-0x000000009a724fff] reserved
BIOS-e820: [mem 0x000000009a725000-0x00000000b8bb6fff] usable
BIOS-e820: [mem 0x00000000b8bb7000-0x00000000b8dc8fff] reserved
BIOS-e820: [mem 0x00000000b8dc9000-0x00000000b8de9fff] ACPI data
BIOS-e820: [mem 0x00000000b8dea000-0x00000000b9312fff] ACPI NVS
BIOS-e820: [mem 0x00000000b9313000-0x00000000b9ffefff] reserved
BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable
BIOS-e820: [mem 0x00000000bb000000-0x00000000bf1fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: ASUS All Series/Z97-A, BIOS 0702 04/23/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FC0000000 write-back
2 base 00C0000000 mask 7FC0000000 uncachable
3 base 00BC000000 mask 7FFC000000 uncachable
4 base 00BB000000 mask 7FFF000000 uncachable
5 base 023FE00000 mask 7FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 2992MB, range: 16MB, type UC
reg 5, base: 9214MB, range: 2MB, type UC
total RAM covered: 8110M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 2992MB, range: 16MB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 1GB, type WB
reg 6, base: 9214MB, range: 2MB, type UC
e820: update [mem 0xbb000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf] mapped at [ffff8800000fd8c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x23fc00000-0x23fdfffff]
[mem 0x23fc00000-0x23fdfffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23fbfffff]
[mem 0x23c000000-0x23fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x99e62fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x99dfffff] page 2M
[mem 0x99e00000-0x99e62fff] page 4k
init_memory_mapping: [mem 0x99e6a000-0x9a2c2fff]
[mem 0x99e6a000-0x99ffffff] page 4k
[mem 0x9a000000-0x9a1fffff] page 2M
[mem 0x9a200000-0x9a2c2fff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x9a725000-0xb8bb6fff]
[mem 0x9a725000-0x9a7fffff] page 4k
[mem 0x9a800000-0xb89fffff] page 2M
[mem 0xb8a00000-0xb8bb6fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xb9fff000-0xb9ffffff]
[mem 0xb9fff000-0xb9ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x34902000-0x36478fff]
ACPI: RSDP 00000000000f04a0 000024 (v02 ALASKA)
ACPI: XSDT 00000000b8dcf080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000b8de1ae0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000b8dcf188 012951 (v02 ALASKA A M I 00000006 INTL 20120711)
ACPI: FACS 00000000b9312f80 000040
ACPI: APIC 00000000b8de1bf0 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000b8de1c88 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000b8de1cd0 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 00000000b8de28c0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000b8de2e00 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 00000000b8de3978 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000b8de39b8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000b8de39f0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000b8de3d60 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
Initmem setup node 0 [mem 0x00000000-0x23fdfffff]
NODE_DATA [mem 0x23fdf7000-0x23fdfbfff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x99e62fff]
node 0: [mem 0x99e6a000-0x9a2c2fff]
node 0: [mem 0x9a725000-0xb8bb6fff]
node 0: [mem 0xb9fff000-0xb9ffffff]
node 0: [mem 0x100000000-0x23fdfffff]
On node 0 totalpages: 2065643
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11742 pages used for memmap
DMA32 zone: 751439 pages, LIFO batch:31
Normal zone: 20472 pages used for memmap
Normal zone: 1310208 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x99e63000-0x99e69fff]
PM: Registered nosave memory: [mem 0x9a2c3000-0x9a724fff]
PM: Registered nosave memory: [mem 0xb8bb7000-0xb8dc8fff]
PM: Registered nosave memory: [mem 0xb8dc9000-0xb8de9fff]
PM: Registered nosave memory: [mem 0xb8dea000-0xb9312fff]
PM: Registered nosave memory: [mem 0xb9313000-0xb9ffefff]
PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
PM: Registered nosave memory: [mem 0xbb000000-0xbf1fffff]
PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf200000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88023fa00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033344
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8019756K/8262572K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 242816K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3997.931 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7995.86 BogoMIPS (lpj=15991724)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (63966.89 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x99e63000-0x99e69fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xb8dea000-0xb9312fff] (5410816 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 21:29:43, date: 08/29/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 15 blocks of module-level executable AML code
ACPI: SSDT 00000000b8d77c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000b8d77618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000b8d76d98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xbf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdf800000-0xdfbfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xdfc34000-0xdfc37fff 64bit]
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdfc20000-0xdfc2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdfc3e000-0xdfc3e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xdfc00000-0xdfc1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xdfc3c000-0xdfc3cfff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdfc3b000-0xdfc3b3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xdfc30000-0xdfc33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdfc3a000-0xdfc3a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdfc39000-0xdfc397ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdfc38000-0xdfc380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xbf200000-0xfeafffff] (subtractive decode)
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xbf200000-0xfeafffff] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x99e63000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9a2c3000-0x9bffffff]
e820: reserve RAM buffer [mem 0xb8bb7000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:08: [io 0x02a0-0x02af] has been reserved
system 00:08: [io 0x0a00-0x0aff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xdffe0000-0xdffeffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xbf200000-0xfeafffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:03: resource 13 [mem 0xbf200000-0xfeafffff]
pci_bus 0000:04: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: resource 17 [mem 0xbf200000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28124K (ffff880034902000 - ffff880036479000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb4bb7000-0xb8bb7000] (64MB) mapped at [ffff8800b4bb7000-ffff8800b8bb6fff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1409347783.520:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15718
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1200x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 9024k, total 9024k
Console: switching to colour frame buffer device 240x75
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfc3b000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfc3a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:347:501
rtc_cmos 00:06: setting system clock to 2014-08-29 21:29:43 UTC (1409347783)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[146]: starting version 204
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
[drm] Initialized drm 1.1.0 20060810
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:c3:7b:6a:f8:47
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdfc39000 port 0xdfc39100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xdfc39000 port 0xdfc39180 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 8d0000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1: new high-speed USB device number 2 using ehci-pci
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: New USB device found, idVendor=8087, idProduct=8009
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
[drm:intel_wait_ddi_buf_idle] *ERROR* Timeout waiting for DDI BUF B idle bit
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATAPI: ATAPI iHAS124 E, 4L06, max UDMA/100
ata2.00: configured for UDMA/100
usb 2-1: new high-speed USB device number 2 using ehci-pci
scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Console: switching to colour frame buffer device 240x75
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:17: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 2-1: New USB device found, idVendor=8087, idProduct=8001
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
tsc: Refined TSC clocksource calibration: 3997.681 MHz
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 50 bits of entropy available
usb 3-9: new high-speed USB device number 2 using xhci_hcd
usb 3-9: New USB device found, idVendor=054c, idProduct=0243
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9: Product: Storage Media
usb 3-9: Manufacturer: Sony
usb 3-9: SerialNumber: 2A08041817067
usb 3-9: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-9: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
Adding 8260604k swap on /dev/sda5. Priority:-1 extents:1 across:8260604k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[414]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
kvm: disabled by bios
random: nonblocking pool is initialized
device-mapper: multipath: version 1.6.0 loaded
usb 3-10: new high-speed USB device number 3 using xhci_hcd
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
asus_wmi: Backlight controlled by ACPI video driver
usb 3-10: New USB device found, idVendor=05ac, idProduct=911f
usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-10:1.0: USB hub found
hub 3-10:1.0: 3 ports detected
SKU: Nid=0x1d sku_cfg=0x4047e629
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000e6
SKU: external_amp=0x5
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4047e629 for NID 0x1d
realtek: Enabling init ASM_ID=0xe629 CODEC_ID=10ec0892
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
usb-storage 3-9:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-9:1.0
usbcore: registered new interface driver usb-storage
init: failsafe main process (708) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (841) killed by HUP signal
init: cups main process ended, respawning
init: samba-ad-dc main process (878) terminated with status 1
usb 3-10.1: new full-speed USB device number 4 using xhci_hcd
usb 3-10.1: New USB device found, idVendor=05ac, idProduct=1002
usb 3-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10.1: Product: Hub in Apple Extended USB Keyboard
usb 3-10.1: Manufacturer: Mitsumi Electric
usb 3-10.1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-10.1:1.0: USB hub found
hub 3-10.1:1.0: 3 ports detected
usb 3-10.2: new low-speed USB device number 5 using xhci_hcd
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
usb 3-10.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-10.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-10.2: Product: Evoluent VerticalMouse 2
usb 3-10.2: Manufacturer: Kingsis Peripherals
usb 3-10.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.2/3-10.2:1.0/input/input16
hid-generic 0003:2222:3061.0001: input,hidraw0: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-10.2/input0
usb 3-10.3: new low-speed USB device number 6 using xhci_hcd
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1376) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Switched to clocksource tsc
init: plymouth-stop pre-start process (1450) terminated with status 1
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
scsi 6:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 3-10.3: New USB device found, idVendor=05ac, idProduct=921f
usb 3-10.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-10.3: Product: Apple Cinema HD Display
hid-generic 0003:05AC:921F.0002: hiddev0,hidraw1: USB HID v1.11 Device [Apple Cinema HD Display] on usb-0000:00:14.0-10.3/input0
usb 3-10.1.1: new full-speed USB device number 7 using xhci_hcd
usb 3-10.1.1: New USB device found, idVendor=05ac, idProduct=0204
usb 3-10.1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-10.1.1: Product: Apple Extended USB Keyboard
usb 3-10.1.1: Manufacturer: Mitsumi Electric
usb 3-10.1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-10.1.1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.0/input/input17
hid-generic 0003:05AC:0204.0003: input,hidraw2: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:14.0-10.1.1/input0
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1.1/3-10.1.1:1.1/input/input18
hid-generic 0003:05AC:0204.0004: input,hidraw3: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:14.0-10.1.1/input1
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 3-9: USB disconnect, device number 2
usb 3-10: USB disconnect, device number 3
usb 3-10.1: USB disconnect, device number 4
usb 3-10.1.1: USB disconnect, device number 7
usb 3-10.2: USB disconnect, device number 5
usb 3-10.3: USB disconnect, device number 6
usb 3-9: new low-speed USB device number 8 using xhci_hcd
usb 3-9: Device not responding to set address.
usb 3-9: Device not responding to set address.
usb 3-9: device not accepting address 8, error -71
usb 3-9: new full-speed USB device number 9 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 10 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input19
hid-generic 0003:04D9:2011.0005: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input20
hid-generic 0003:04D9:2011.0006: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 11 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input21
hid-generic 0003:2222:3061.0007: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 12 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input22
hid-generic 0003:10D5:55A2.0008: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 9
usb 3-9.1: USB disconnect, device number 10
usb 3-9.2: USB disconnect, device number 11
usb 3-9.3: USB disconnect, device number 12
usb 3-9: new full-speed USB device number 13 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 14 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input23
hid-generic 0003:04D9:2011.0009: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input24
hid-generic 0003:04D9:2011.000A: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 15 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input25
hid-generic 0003:2222:3061.000B: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 16 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input26
hid-generic 0003:10D5:55A2.000C: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 13
usb 3-9.1: USB disconnect, device number 14
usb 3-9.2: USB disconnect, device number 15
usb 3-9.3: USB disconnect, device number 16
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 89
Raw EDID:
00 ff ff ff ff ff ff 00 06 10 1f 92 ee 07 fe 02
23 0e 01 03 80 31 1f 78 2e cf b5 a3 55 49 99 25
10 50 54 00 00 00 d1 00 01 01 01 01 01 01 01 01
01 01 01 01 01 01 25 3c 80 a0 70 b0 23 40 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 0f ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 29
Raw EDID:
00 ff ff ff ff ff ff 00 06 10 1f 92 ee 07 fe 02
23 0e 01 03 80 31 1f 78 2e cf b5 a3 55 49 99 25
10 50 54 00 00 00 d1 00 01 01 01 01 01 01 ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 105
Raw EDID:
40 01 02 00 00 00 00 76 00 01 a5 00 ff ff 03 1a
1a a8 01 00 00 00 00 00 40 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 09 ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
usb 3-9: new full-speed USB device number 17 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 18 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input27
hid-generic 0003:04D9:2011.000D: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input28
hid-generic 0003:04D9:2011.000E: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 19 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input29
hid-generic 0003:2222:3061.000F: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 20 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input30
hid-generic 0003:10D5:55A2.0010: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 17
usb 3-9.1: USB disconnect, device number 18
usb 3-9.2: USB disconnect, device number 19
usb 3-9.3: USB disconnect, device number 20
usb 3-9: new full-speed USB device number 21 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 22 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input31
hid-generic 0003:04D9:2011.0011: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input32
hid-generic 0003:04D9:2011.0012: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 23 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input33
hid-generic 0003:2222:3061.0013: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 24 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input34
hid-generic 0003:10D5:55A2.0014: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 21
usb 3-9.1: USB disconnect, device number 22
usb 3-9.2: USB disconnect, device number 23
usb 3-9.3: USB disconnect, device number 24
usb 3-9: new full-speed USB device number 25 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 26 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input35
hid-generic 0003:04D9:2011.0015: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input36
hid-generic 0003:04D9:2011.0016: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 27 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input37
hid-generic 0003:2222:3061.0017: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 28 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input38
hid-generic 0003:10D5:55A2.0018: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 25
usb 3-9.1: USB disconnect, device number 26
usb 3-9.2: USB disconnect, device number 27
usb 3-9.3: USB disconnect, device number 28
usb 3-9: new full-speed USB device number 29 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 30 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input39
hid-generic 0003:04D9:2011.0019: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input40
hid-generic 0003:04D9:2011.001A: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 31 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input41
hid-generic 0003:2222:3061.001B: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 32 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input42
hid-generic 0003:10D5:55A2.001C: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 29
usb 3-9.1: USB disconnect, device number 30
usb 3-9.2: USB disconnect, device number 31
usb 3-9.3: USB disconnect, device number 32
usb 3-9: new full-speed USB device number 33 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 34 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input43
hid-generic 0003:04D9:2011.001D: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input44
hid-generic 0003:04D9:2011.001E: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 35 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input45
hid-generic 0003:2222:3061.001F: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 36 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input46
hid-generic 0003:10D5:55A2.0020: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 33
usb 3-9.1: USB disconnect, device number 34
usb 3-9.2: USB disconnect, device number 35
usb 3-9.3: USB disconnect, device number 36
usb 3-9: new full-speed USB device number 37 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 38 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input47
hid-generic 0003:04D9:2011.0021: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input48
hid-generic 0003:04D9:2011.0022: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 39 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input49
hid-generic 0003:2222:3061.0023: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 40 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input50
hid-generic 0003:10D5:55A2.0024: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 37
usb 3-9.1: USB disconnect, device number 38
usb 3-9.2: USB disconnect, device number 39
usb 3-9.3: USB disconnect, device number 40
usb 3-9: new full-speed USB device number 41 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 42 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input51
hid-generic 0003:04D9:2011.0025: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input52
hid-generic 0003:04D9:2011.0026: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 43 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input53
hid-generic 0003:2222:3061.0027: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 44 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input54
hid-generic 0003:10D5:55A2.0028: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 41
usb 3-9.1: USB disconnect, device number 42
usb 3-9.2: USB disconnect, device number 43
usb 3-9.3: USB disconnect, device number 44
usb 3-9: new full-speed USB device number 45 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 46 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input55
hid-generic 0003:04D9:2011.0029: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input56
hid-generic 0003:04D9:2011.002A: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 47 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input57
hid-generic 0003:2222:3061.002B: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 48 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input58
hid-generic 0003:10D5:55A2.002C: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 45
usb 3-9.1: USB disconnect, device number 46
usb 3-9.2: USB disconnect, device number 47
usb 3-9.3: USB disconnect, device number 48
usb 3-9: new full-speed USB device number 49 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 50 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input59
hid-generic 0003:04D9:2011.002D: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input60
hid-generic 0003:04D9:2011.002E: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 51 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input61
hid-generic 0003:2222:3061.002F: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 52 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input62
hid-generic 0003:10D5:55A2.0030: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 49
usb 3-9.1: USB disconnect, device number 50
usb 3-9.2: USB disconnect, device number 51
usb 3-9.3: USB disconnect, device number 52
usb 3-9: new full-speed USB device number 53 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 54 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input63
hid-generic 0003:04D9:2011.0031: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input64
hid-generic 0003:04D9:2011.0032: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 55 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input65
hid-generic 0003:2222:3061.0033: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 56 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input66
hid-generic 0003:10D5:55A2.0034: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
i2c /dev entries driver
waiting module removal not supported: please upgrade
waiting module removal not supported: please upgrade[161810.720527] usb 3-9: USB disconnect, device number 53
usb 3-9.1: USB disconnect, device number 54
usb 3-9.2: USB disconnect, device number 55
usb 3-9.3: USB disconnect, device number 56
usb 3-9: new full-speed USB device number 57 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 58 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input67
hid-generic 0003:04D9:2011.0035: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input68
hid-generic 0003:04D9:2011.0036: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 59 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input69
hid-generic 0003:2222:3061.0037: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 60 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input70
hid-generic 0003:10D5:55A2.0038: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint
usb 3-9: USB disconnect, device number 57
usb 3-9.1: USB disconnect, device number 58
usb 3-9.2: USB disconnect, device number 59
usb 3-9.3: USB disconnect, device number 60
usb 3-9: new full-speed USB device number 61 using xhci_hcd
usb 3-9: New USB device found, idVendor=058f, idProduct=9254
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Generic USB Hub
usb 3-9: Manufacturer: ALCOR
usb 3-9: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.1: new low-speed USB device number 62 using xhci_hcd
usb 3-9.1: New USB device found, idVendor=04d9, idProduct=2011
usb 3-9.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-9.1: Product: USB Keyboard
usb 3-9.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input71
hid-generic 0003:04D9:2011.0039: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input72
hid-generic 0003:04D9:2011.003A: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.1/input1
usb 3-9.2: new low-speed USB device number 63 using xhci_hcd
usb 3-9.2: New USB device found, idVendor=2222, idProduct=3061
usb 3-9.2: New USB device strings: Mfr=7, Product=3, SerialNumber=0
usb 3-9.2: Product: Evoluent VerticalMouse 2
usb 3-9.2: Manufacturer: Kingsis Peripherals
usb 3-9.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Kingsis Peripherals Evoluent VerticalMouse 2 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input73
hid-generic 0003:2222:3061.003B: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 2] on usb-0000:00:14.0-9.2/input0
usb 3-9.3: new low-speed USB device number 64 using xhci_hcd
usb 3-9.3: New USB device found, idVendor=10d5, idProduct=55a2
usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.3: Product: 2Port KVMSwicther
usb 3-9.3: Manufacturer: No brand
usb 3-9.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/input/input74
hid-generic 0003:10D5:55A2.003C: input,hidraw3: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:14.0-9.3/input0
usbhid 3-9.3:1.1: couldn't find an input interrupt endpoint