dmesg - uk41
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-26-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #45~precise1-Ubuntu SMP Tue Jul 15 04:02:35 UTC 2014 (Ubuntu 3.11.0-26.45~precise1-generic 3.11.10.12)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf698fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf699000-0x00000000cf6aefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf6af000-0x00000000cf6cdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf6ce000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. PowerEdge R610/086HF8, BIOS 1.1.4 05/08/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 4 base 0120000000 mask FFF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf699 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fda000, 0x01fdafff] PGTABLE
[ 0.000000] BRK [0x01fdb000, 0x01fdbfff] PGTABLE
[ 0.000000] BRK [0x01fdc000, 0x01fdcfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcf698fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcf5fffff] page 2M
[ 0.000000] [mem 0xcf600000-0xcf698fff] page 4k
[ 0.000000] RAMDISK: [mem 0x353ec000-0x369edfff]
[ 0.000000] ACPI: RSDP 00000000000f1630 00024 (v02 DELL )
[ 0.000000] ACPI Warning: BIOS XSDT has NULL entry, using RSDT (20130517/tbutils-493)
[ 0.000000] ACPI: RSDT 00000000000f1654 00060 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6c3400 00074 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf6af000 0320F (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6c6000 00040
[ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6c3668 001A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WDAT 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI Error: Null physical address for ACPI table [(null)] (20130517/tbutils-279)
[ 0.000000] ACPI Error: Null physical address for ACPI table [(null)] (20130517/tbutils-279)
[ 0.000000] ACPI Error: Null physical address for ACPI table [(null)] (20130517/tbutils-279)
[ 0.000000] ACPI Error: Null physical address for ACPI table [(null)] (20130517/tbutils-279)
[ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6c7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x11 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x15 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x17 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x00000000-0xcfffffff]
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x100000000-0x12fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x12fffffff] -> [mem 0x00000000-0x12fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xcf698fff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1046072
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13211 pages used for memmap
[ 0.000000] DMA32 zone: 845465 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf699000-0xcf6aefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf6af000-0xcf6cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf6ce000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012b200000 s86720 r8192 d23872 u131072
[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029702
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4009820K/4184288K available (7520K kernel code, 1081K rwdata, 4076K rodata, 1392K init, 1428K bss, 174468K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:1480 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2260.892 MHz processor
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.78 BogoMIPS (lpj=9043568)
[ 0.000012] pid_max: default: 32768 minimum: 301
[ 0.000049] Security Framework initialized
[ 0.000083] AppArmor: AppArmor initialized
[ 0.000087] Yama: becoming mindful.
[ 0.000420] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001712] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002301] Mount-cache hash table entries: 256
[ 0.002536] Initializing cgroup subsys memory
[ 0.002551] Initializing cgroup subsys devices
[ 0.002554] Initializing cgroup subsys freezer
[ 0.002558] Initializing cgroup subsys blkio
[ 0.002561] Initializing cgroup subsys perf_event
[ 0.002565] Initializing cgroup subsys hugetlb
[ 0.002589] CPU: Physical Processor ID: 1
[ 0.002592] CPU: Processor Core ID: 0
[ 0.002599] mce: CPU supports 9 MCE banks
[ 0.002611] CPU0: Thermal monitoring enabled (TM1)
[ 0.002622] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.002622] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002622] tlb_flushall_shift: 6
[ 0.002731] Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000)
[ 0.005010] ACPI: Core revision 20130517
[ 0.006537] ACPI: All ACPI Tables successfully acquired
[ 0.006621] ftrace: allocating 31320 entries in 123 pages
[ 0.023172] dmar: Host address width 40
[ 0.023176] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.023184] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.023189] dmar: RMRR base: 0x000000cf7c8000 end: 0x000000cf7dffff
[ 0.023192] dmar: RMRR base: 0x000000cf7b1000 end: 0x000000cf7bffff
[ 0.023195] dmar: RMRR base: 0x000000cf7a1000 end: 0x000000cf7a1fff
[ 0.023197] dmar: RMRR base: 0x000000cf7a3000 end: 0x000000cf7a3fff
[ 0.023200] dmar: RMRR base: 0x000000cf7a5000 end: 0x000000cf7a5fff
[ 0.023203] dmar: RMRR base: 0x000000cf7a7000 end: 0x000000cf7a7fff
[ 0.023206] dmar: RMRR base: 0x000000cf7c0000 end: 0x000000cf7c0fff
[ 0.023209] dmar: RMRR base: 0x000000cf7c2000 end: 0x000000cf7c2fff
[ 0.023211] dmar: ATSR flags: 0x0
[ 0.023316] This system BIOS has enabled interrupt remapping
[ 0.023316] on a chipset that contains an erratum making that
[ 0.023316] feature unstable. To maintain system stability
[ 0.023316] interrupt remapping is being disabled. Please
[ 0.023316] contact your BIOS vendor for an update
[ 0.023392] Switched APIC routing to physical flat.
[ 0.023927] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063619] smpboot: CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz (fam: 06, model: 1a, stepping: 05)
[ 0.170126] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.170135] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.170138] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.170142] ... version: 3
[ 0.170144] ... bit width: 48
[ 0.170147] ... generic registers: 4
[ 0.170149] ... value mask: 0000ffffffffffff
[ 0.170152] ... max period: 000000007fffffff
[ 0.170154] ... fixed-purpose events: 3
[ 0.170156] ... event mask: 000000070000000f
[ 0.185920] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.172484] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
[ 0.265422] Brought up 8 CPUs
[ 0.265431] smpboot: Total of 8 processors activated (36174.27 BogoMIPS)
[ 0.272179] devtmpfs: initialized
[ 0.273333] EVM: security.selinux
[ 0.273336] EVM: security.SMACK64
[ 0.273339] EVM: security.capability
[ 0.274484] regulator-dummy: no parameters
[ 0.274516] RTC time: 23:49:56, date: 08/26/14
[ 0.274571] NET: Registered protocol family 16
[ 0.274702] ACPI: bus type PCI registered
[ 0.274706] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.274768] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.274774] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.286745] PCI: Using configuration type 1 for base access
[ 0.288047] bio: create slab at 0
[ 0.288263] ACPI: Added _OSI(Module Device)
[ 0.288267] ACPI: Added _OSI(Processor Device)
[ 0.288270] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.288273] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.288787] ACPI: EC: Look up EC in DSDT
[ 0.289563] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.289620] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 0.289628] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8801296b0870), AE_NOT_FOUND (20130517/psparse-536)
[ 0.290697] ACPI: Interpreter enabled
[ 0.290704] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.290710] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.290716] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
[ 0.290729] ACPI: (supports S0 S4 S5)
[ 0.290731] ACPI: Using IOAPIC for interrupt routing
[ 0.290757] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.290810] ACPI: No dock devices found.
[ 0.295167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.295373] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.295577] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.295794] PCI host bridge to bus 0000:00
[ 0.295799] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.295803] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.295807] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.295810] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.295814] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff]
[ 0.295818] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.295833] pci 0000:00:00.0: [8086:3403] type 00 class 0x060000
[ 0.295885] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.295949] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.296003] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.296067] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.296121] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.296186] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.296240] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.296305] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 0.296359] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.296425] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.296526] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.296627] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.296731] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
[ 0.296744] pci 0000:00:16.0: reg 0x10: [mem 0xdf0e0000-0xdf0e3fff 64bit]
[ 0.296847] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
[ 0.296859] pci 0000:00:16.1: reg 0x10: [mem 0xdf0e4000-0xdf0e7fff 64bit]
[ 0.296964] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
[ 0.296976] pci 0000:00:16.2: reg 0x10: [mem 0xdf0e8000-0xdf0ebfff 64bit]
[ 0.297078] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
[ 0.297090] pci 0000:00:16.3: reg 0x10: [mem 0xdf0ec000-0xdf0effff 64bit]
[ 0.297194] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
[ 0.297206] pci 0000:00:16.4: reg 0x10: [mem 0xdf0f0000-0xdf0f3fff 64bit]
[ 0.297309] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
[ 0.297321] pci 0000:00:16.5: reg 0x10: [mem 0xdf0f4000-0xdf0f7fff 64bit]
[ 0.297423] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
[ 0.297436] pci 0000:00:16.6: reg 0x10: [mem 0xdf0f8000-0xdf0fbfff 64bit]
[ 0.297536] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
[ 0.297549] pci 0000:00:16.7: reg 0x10: [mem 0xdf0fc000-0xdf0fffff 64bit]
[ 0.297654] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.297696] pci 0000:00:1a.0: reg 0x20: [io 0xec40-0xec5f]
[ 0.297784] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.297825] pci 0000:00:1a.1: reg 0x20: [io 0xec60-0xec7f]
[ 0.297921] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.297942] pci 0000:00:1a.7: reg 0x10: [mem 0xdf0df800-0xdf0dfbff]
[ 0.298030] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.298092] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.298162] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.298238] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.298281] pci 0000:00:1d.0: reg 0x20: [io 0xec80-0xec9f]
[ 0.298367] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.298409] pci 0000:00:1d.1: reg 0x20: [io 0xeca0-0xecbf]
[ 0.298510] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.298531] pci 0000:00:1d.7: reg 0x10: [mem 0xdf0dfc00-0xdf0dffff]
[ 0.298618] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.298680] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.298779] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.298855] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.298864] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
[ 0.298869] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.298875] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 0.298881] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 0.298965] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[ 0.298981] pci 0000:00:1f.2: reg 0x10: [io 0xec10-0xec17]
[ 0.298988] pci 0000:00:1f.2: reg 0x14: [io 0xec08-0xec0b]
[ 0.298996] pci 0000:00:1f.2: reg 0x18: [io 0xec18-0xec1f]
[ 0.299004] pci 0000:00:1f.2: reg 0x1c: [io 0xec0c-0xec0f]
[ 0.299012] pci 0000:00:1f.2: reg 0x20: [io 0xec20-0xec2f]
[ 0.299019] pci 0000:00:1f.2: reg 0x24: [io 0xec30-0xec3f]
[ 0.299163] pci 0000:01:00.0: [14e4:1639] type 00 class 0x020000
[ 0.299179] pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd7ffffff 64bit]
[ 0.299261] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.299316] pci 0000:01:00.1: [14e4:1639] type 00 class 0x020000
[ 0.299332] pci 0000:01:00.1: reg 0x10: [mem 0xd8000000-0xd9ffffff 64bit]
[ 0.299413] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 0.306158] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.306168] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
[ 0.306245] pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000
[ 0.306261] pci 0000:02:00.0: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
[ 0.306343] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.306399] pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000
[ 0.306415] pci 0000:02:00.1: reg 0x10: [mem 0xdc000000-0xddffffff 64bit]
[ 0.306496] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.314162] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.314171] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
[ 0.314233] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.314284] pci 0000:00:09.0: PCI bridge to [bus 05]
[ 0.314355] pci 0000:03:00.0: [1000:0058] type 00 class 0x010000
[ 0.314370] pci 0000:03:00.0: reg 0x10: [io 0xfc00-0xfcff]
[ 0.314386] pci 0000:03:00.0: reg 0x14: [mem 0xdf2ec000-0xdf2effff 64bit]
[ 0.314402] pci 0000:03:00.0: reg 0x1c: [mem 0xdf2f0000-0xdf2fffff 64bit]
[ 0.314421] pci 0000:03:00.0: reg 0x30: [mem 0xdf100000-0xdf1fffff pref]
[ 0.314475] pci 0000:03:00.0: supports D1 D2
[ 0.314512] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.314523] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.314528] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
[ 0.314532] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf2fffff]
[ 0.314580] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
[ 0.314597] pci 0000:06:03.0: reg 0x10: [mem 0xd5800000-0xd5ffffff pref]
[ 0.314607] pci 0000:06:03.0: reg 0x14: [mem 0xde7fc000-0xde7fffff]
[ 0.314616] pci 0000:06:03.0: reg 0x18: [mem 0xde800000-0xdeffffff]
[ 0.314648] pci 0000:06:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.314732] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.314740] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
[ 0.314746] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
[ 0.314748] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.314750] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.314752] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.314754] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff] (subtractive decode)
[ 0.314756] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.315569] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 0.315646] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 0.315721] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.315796] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.315870] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.315945] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 0.316021] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.316097] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.316168] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.316178] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.316198] Found 1 acpi root devices
[ 0.316285] vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.316289] vgaarb: loaded
[ 0.316291] vgaarb: bridge control possible 0000:06:03.0
[ 0.316458] SCSI subsystem initialized
[ 0.316462] ACPI: bus type ATA registered
[ 0.316508] libata version 3.00 loaded.
[ 0.316523] ACPI: bus type USB registered
[ 0.316542] usbcore: registered new interface driver usbfs
[ 0.316551] usbcore: registered new interface driver hub
[ 0.316571] usbcore: registered new device driver usb
[ 0.316689] PCI: Using ACPI for IRQ routing
[ 0.322579] PCI: Discovered peer bus fe
[ 0.322582] PCI: root bus fe: using default resources
[ 0.322583] PCI: Probing PCI hardware (bus fe)
[ 0.322607] PCI host bridge to bus 0000:fe
[ 0.322611] pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
[ 0.322615] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.322619] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
[ 0.322627] pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
[ 0.322668] pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
[ 0.322710] pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
[ 0.322748] pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
[ 0.322784] pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
[ 0.322824] pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
[ 0.322861] pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
[ 0.322898] pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
[ 0.322934] pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
[ 0.322971] pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.323013] pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
[ 0.323049] pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
[ 0.323086] pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
[ 0.323122] pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
[ 0.323161] pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
[ 0.323197] pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
[ 0.323232] pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.323269] pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.323309] pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
[ 0.323346] pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
[ 0.323383] pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
[ 0.323419] pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
[ 0.323469] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
[ 0.323498] PCI: pci_cache_line_size set to 64 bytes
[ 0.323579] e820: reserve RAM buffer [mem 0xcf699000-0xcfffffff]
[ 0.323664] NetLabel: Initializing
[ 0.323668] NetLabel: domain hash size = 128
[ 0.323670] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.323681] NetLabel: unlabeled traffic allowed by default
[ 0.323724] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.323731] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.323737] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.326000] Switched to clocksource hpet
[ 0.330982] AppArmor: AppArmor Filesystem Enabled
[ 0.331009] pnp: PnP ACPI init
[ 0.331023] ACPI: bus type PNP registered
[ 0.331087] pnp 00:00: [dma 4]
[ 0.331113] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.331158] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.331213] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.331255] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.331494] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.331718] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.332443] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.332449] system 00:06: [io 0x0880-0x08ff] could not be reserved
[ 0.332453] system 00:06: [io 0x0900-0x091f] has been reserved
[ 0.332456] system 00:06: [io 0x0920-0x0923] has been reserved
[ 0.332460] system 00:06: [io 0x0924] has been reserved
[ 0.332464] system 00:06: [io 0x0c00-0x0c7f] has been reserved
[ 0.332467] system 00:06: [io 0x0ca0-0x0ca7] has been reserved
[ 0.332471] system 00:06: [io 0x0ca9-0x0cab] has been reserved
[ 0.332475] system 00:06: [io 0x0cad-0x0caf] has been reserved
[ 0.332479] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.332524] pnp 00:07: [irq 0 disabled]
[ 0.332563] system 00:07: [io 0x0ca8] has been reserved
[ 0.332567] system 00:07: [io 0x0cac] has been reserved
[ 0.332572] system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
[ 0.332610] pnp 00:08: [irq 0 disabled]
[ 0.332646] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.332895] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.332901] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.332961] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.333009] system 00:0b: [mem 0xfed90000-0xfed91fff] could not be reserved
[ 0.333015] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.333172] pnp: PnP ACPI: found 12 devices
[ 0.333176] ACPI: bus type PNP unregistered
[ 0.339477] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.339483] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.339489] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
[ 0.339497] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.339503] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
[ 0.339510] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.339520] pci 0000:00:09.0: PCI bridge to [bus 05]
[ 0.339529] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.339534] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
[ 0.339540] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf2fffff]
[ 0.339551] pci 0000:06:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
[ 0.339556] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.339562] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
[ 0.339567] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
[ 0.340765] pci 0000:00:1e.0: setting latency timer to 64
[ 0.340770] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.340772] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.340774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.340776] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff]
[ 0.340778] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.340780] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff]
[ 0.340782] pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]
[ 0.340784] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 0.340786] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf2fffff]
[ 0.340789] pci_bus 0000:06: resource 1 [mem 0xde000000-0xdeffffff]
[ 0.340791] pci_bus 0000:06: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref]
[ 0.340793] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.340795] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.340796] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.340798] pci_bus 0000:06: resource 7 [mem 0xd0000000-0xfdffffff]
[ 0.340800] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.340802] pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
[ 0.340804] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
[ 0.340842] NET: Registered protocol family 2
[ 0.341032] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.341207] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.341343] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.341371] TCP: reno registered
[ 0.341381] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.341406] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.341511] NET: Registered protocol family 1
[ 0.359716] pci 0000:06:03.0: Boot video device
[ 0.359744] PCI: CLS 64 bytes, default 64
[ 0.359784] Trying to unpack rootfs image as initramfs...
[ 0.779550] Freeing initrd memory: 22536K (ffff8800353ec000 - ffff8800369ee000)
[ 0.779572] dmar: Device scope device [0000:00:1a.02] not found
[ 0.779576] dmar: Device scope device [0000:00:1d.02] not found
[ 0.779580] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.779584] software IO TLB [mem 0xcb699000-0xcf699000] (64MB) mapped at [ffff8800cb699000-ffff8800cf698fff]
[ 0.779894] Scanning for low memory corruption every 60 seconds
[ 0.780441] Initialise module verification
[ 0.780494] audit: initializing netlink socket (disabled)
[ 0.780509] type=2000 audit(1409096996.664:1): initialized
[ 0.809621] bounce pool size: 64 pages
[ 0.809639] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.810861] zbud: loaded
[ 0.810994] VFS: Disk quotas dquot_6.5.2
[ 0.811051] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.811606] fuse init (API version 7.22)
[ 0.811686] msgmni has been set to 7875
[ 0.812109] Key type asymmetric registered
[ 0.812113] Asymmetric key parser 'x509' registered
[ 0.812147] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.812201] io scheduler noop registered
[ 0.812205] io scheduler deadline registered (default)
[ 0.812233] io scheduler cfq registered
[ 0.812377] pcieport 0000:00:01.0: irq 72 for MSI/MSI-X
[ 0.812452] pcieport 0000:00:03.0: irq 73 for MSI/MSI-X
[ 0.812523] pcieport 0000:00:07.0: irq 74 for MSI/MSI-X
[ 0.812593] pcieport 0000:00:09.0: irq 75 for MSI/MSI-X
[ 0.812664] pcieport 0000:00:1c.0: irq 76 for MSI/MSI-X
[ 0.812749] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 0.812770] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 0.812791] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 0.812811] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 0.812824] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.812829] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.812832] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.812837] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.812845] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.812848] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.812852] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 0.812857] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.812864] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.812869] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.812876] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.812881] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.812898] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.812903] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.812908] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.812922] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.812939] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.813000] intel_idle: MWAIT substates: 0x1120
[ 0.813011] intel_idle: v0.4 model 0x1A
[ 0.813013] intel_idle: lapic_timer_reliable_states 0x2
[ 0.813136] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.813143] ACPI: Power Button [PWRF]
[ 0.813200] ACPI: Requesting acpi_cpufreq
[ 0.813502] GHES: HEST is not enabled!
[ 0.834003] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.854421] 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.855680] Linux agpgart interface v0.103
[ 0.857127] brd: module loaded
[ 0.857858] loop: module loaded
[ 0.857924] megasas: 06.600.18.00-rc1 Wed. May. 15 17:00:00 PDT 2013
[ 0.857989] ata_piix 0000:00:1f.2: version 2.13
[ 0.858267] ata_piix 0000:00:1f.2: MAP [
[ 0.858271] P0 -- P1 -- ]
[ 1.014177] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.014354] scsi0 : ata_piix
[ 1.014415] scsi1 : ata_piix
[ 1.014451] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
[ 1.014456] ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
[ 1.014698] libphy: Fixed MDIO Bus: probed
[ 1.014778] tun: Universal TUN/TAP device driver, 1.6
[ 1.014781] tun: (C) 1999-2004 Max Krasnyansky
[ 1.014822] PPP generic driver version 2.4.2
[ 1.014861] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.014865] ehci-pci: EHCI PCI platform driver
[ 1.015129] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 1.015142] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.015149] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.015165] ehci-pci 0000:00:1a.7: debug port 1
[ 1.019072] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.019085] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf0df800
[ 1.030167] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.030199] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.030204] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.030208] usb usb1: Product: EHCI Host Controller
[ 1.030211] usb usb1: Manufacturer: Linux 3.11.0-26-generic ehci_hcd
[ 1.030214] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.030316] hub 1-0:1.0: USB hub found
[ 1.030324] hub 1-0:1.0: 4 ports detected
[ 1.030686] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1.030699] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.030706] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.030720] ehci-pci 0000:00:1d.7: debug port 1
[ 1.034606] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.034621] ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf0dfc00
[ 1.046171] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.046189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.046193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.046198] usb usb2: Product: EHCI Host Controller
[ 1.046201] usb usb2: Manufacturer: Linux 3.11.0-26-generic ehci_hcd
[ 1.046204] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.046299] hub 2-0:1.0: USB hub found
[ 1.046306] hub 2-0:1.0: 4 ports detected
[ 1.046400] ehci-platform: EHCI generic platform driver
[ 1.046409] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.046412] ohci-pci: OHCI PCI platform driver
[ 1.046424] ohci-platform: OHCI generic platform driver
[ 1.046431] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.046704] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.046708] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.046715] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.046751] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
[ 1.046785] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.046789] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.046793] usb usb3: Product: UHCI Host Controller
[ 1.046796] usb usb3: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
[ 1.046800] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.046878] hub 3-0:1.0: USB hub found
[ 1.046884] hub 3-0:1.0: 2 ports detected
[ 1.047192] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.047196] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.047203] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.047235] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
[ 1.047264] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.047268] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.047272] usb usb4: Product: UHCI Host Controller
[ 1.047275] usb usb4: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
[ 1.047279] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.047362] hub 4-0:1.0: USB hub found
[ 1.047368] hub 4-0:1.0: 2 ports detected
[ 1.047673] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.047676] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.047683] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.047708] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
[ 1.047736] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.047740] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.047744] usb usb5: Product: UHCI Host Controller
[ 1.047747] usb usb5: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
[ 1.047751] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.047828] hub 5-0:1.0: USB hub found
[ 1.047833] hub 5-0:1.0: 2 ports detected
[ 1.048143] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.048147] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.048154] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.048188] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[ 1.048216] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.048220] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.048224] usb usb6: Product: UHCI Host Controller
[ 1.048227] usb usb6: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
[ 1.048231] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.048306] hub 6-0:1.0: USB hub found
[ 1.048311] hub 6-0:1.0: 2 ports detected
[ 1.048426] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.051313] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.051320] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.051418] mousedev: PS/2 mouse device common for all mice
[ 1.051501] rtc_cmos 00:03: RTC can wake from S4
[ 1.051608] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.051635] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.051695] device-mapper: uevent: version 1.0.3
[ 1.051752] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 1.051937] cpuidle: using governor ladder
[ 1.052129] cpuidle: using governor menu
[ 1.052152] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.052239] TCP: cubic registered
[ 1.052335] NET: Registered protocol family 10
[ 1.052565] NET: Registered protocol family 17
[ 1.052581] Key type dns_resolver registered
[ 1.052844] PM: Hibernation image not present or could not be loaded.
[ 1.052848] Loading module verification certificates
[ 1.053833] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 05f79677c64ce29c19b2aaf989bed111ed47632f'
[ 1.053844] registered taskstats version 1
[ 1.055817] Key type trusted registered
[ 1.058144] Key type encrypted registered
[ 1.060869] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.061441] regulator-dummy: disabling
[ 1.061726] Magic number: 10:196:859
[ 1.061970] rtc_cmos 00:03: setting system clock to 2014-08-26 23:49:57 UTC (1409096997)
[ 1.063794] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.063799] EDD information not available.
[ 1.342332] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.474797] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[ 1.474806] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.475198] hub 1-3:1.0: USB hub found
[ 1.475413] hub 1-3:1.0: 3 ports detected
[ 1.490421] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.498581] ata1.00: ATAPI: PLDS DVD+/-RW DS-8A3S, HD51, max UDMA/100
[ 1.514562] ata1.00: configured for UDMA/100
[ 1.523296] scsi 0:0:0:0: CD-ROM PLDS DVD+-RW DS-8A3S HD51 PQ: 0 ANSI: 5
[ 1.529846] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 1.529855] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.530108] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.530304] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.778428] tsc: Refined TSC clocksource calibration: 2260.999 MHz
[ 1.934656] usb 1-3.2: new low-speed USB device number 3 using ehci-pci
[ 2.042505] ata2: failed to resume link (SControl 0)
[ 2.053184] ata2: SATA link down (SStatus 4 SControl 0)
[ 2.055731] Freeing unused kernel memory: 1392K (ffffffff81d10000 - ffffffff81e6c000)
[ 2.055736] Write protecting the kernel read-only data: 12288k
[ 2.058093] Freeing unused kernel memory: 660K (ffff88000175b000 - ffff880001800000)
[ 2.058457] Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
[ 2.058627] usb 1-3.2: New USB device found, idVendor=413c, idProduct=2003
[ 2.058634] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.058640] usb 1-3.2: Product: Dell USB Keyboard
[ 2.058645] usb 1-3.2: Manufacturer: Dell
[ 2.078548] udevd[204]: starting version 175
[ 2.104326] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
[ 2.106280] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 00:22:19:61:18:42
[ 2.107957] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 00:22:19:61:18:44
[ 2.108568] bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 00:22:19:61:18:46
[ 2.109158] bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 00:22:19:61:18:48
[ 2.113475] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.114719] Fusion MPT base driver 3.04.20
[ 2.114725] Copyright (c) 1999-2008 LSI Corporation
[ 2.119340] usbcore: registered new interface driver usbhid
[ 2.119346] usbhid: USB HID core driver
[ 2.119687] Fusion MPT SAS Host driver 3.04.20
[ 2.119887] mptbase: ioc0: Initiating bringup
[ 2.138131] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input1
[ 2.138308] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-3.2/input0
[ 2.170590] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[ 2.332673] usb 5-2: New USB device found, idVendor=0624, idProduct=0248
[ 2.332681] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.332687] usb 5-2: Product: USB Composite Device-0
[ 2.332691] usb 5-2: Manufacturer: Avocent
[ 2.332696] usb 5-2: SerialNumber: 20080519
[ 2.341862] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input2
[ 2.342165] hid-generic 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 2.347846] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input3
[ 2.348373] hid-generic 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 2.779175] Switched to clocksource tsc
[ 2.822733] ioc0: LSISAS1068E B3: Capabilities={Initiator}
[ 23.135017] scsi2 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
[ 23.170545] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c5003bd8c3d1
[ 23.171538] scsi 2:0:0:0: Direct-Access SEAGATE ST9300605SS 0002 PQ: 0 ANSI: 6
[ 23.173465] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 23.173778] sd 2:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB)
[ 23.175961] sd 2:0:0:0: [sda] Write Protect is off
[ 23.175970] sd 2:0:0:0: [sda] Mode Sense: d7 00 10 08
[ 23.176542] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 23.180120] sda: sda1 sda2 < sda5 >
[ 23.182934] sd 2:0:0:0: [sda] Attached SCSI disk
[ 24.562329] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 24.562336] vesafb: scrolling: redraw
[ 24.562341] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 24.567234] vesafb: framebuffer at 0xd5800000, mapped to 0xffffc90010880000, using 3072k, total 3072k
[ 24.567557] Console: switching to colour frame buffer device 128x48
[ 24.614269] fb0: VESA VGA frame buffer device
[ 24.749257] xor: measuring software checksum speed
[ 24.787560] prefetch64-sse: 10314.000 MB/sec
[ 24.827562] generic_sse: 9014.000 MB/sec
[ 24.827958] xor: using function: prefetch64-sse (10314.000 MB/sec)
[ 24.895650] raid6: sse2x1 6118 MB/s
[ 24.963679] raid6: sse2x2 7168 MB/s
[ 25.031701] raid6: sse2x4 7962 MB/s
[ 25.032005] raid6: using algorithm sse2x4 (7962 MB/s)
[ 25.032345] raid6: using ssse3x2 recovery algorithm
[ 25.047017] bio: create slab at 1
[ 25.047727] Btrfs loaded
[ 25.192691] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 25.863828] init: ureadahead main process (479) terminated with status 5
[ 26.447280] Adding 4183036k swap on /dev/sda5. Priority:-1 extents:1 across:4183036k FS
[ 26.654844] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.654850] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 26.654854] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 26.654858] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 26.676792] udevd[601]: starting version 175
[ 27.217391] dca service started, version 1.12.1
[ 27.256578] EDAC MC: Ver: 3.0.0
[ 27.279767] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:fe:03.0
[ 27.279797] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
[ 27.279997] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 27.409427] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 27.410204] lp: driver loaded but no devices found
[ 27.421459] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 27.581752] device-mapper: multipath: version 1.6.0 loaded
[ 27.613193] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 27.613543] ioatdma 0000:00:16.0: irq 77 for MSI/MSI-X
[ 27.614009] ioatdma 0000:00:16.1: irq 78 for MSI/MSI-X
[ 27.614420] ioatdma 0000:00:16.2: irq 79 for MSI/MSI-X
[ 27.614868] ioatdma 0000:00:16.3: irq 80 for MSI/MSI-X
[ 27.615272] ioatdma 0000:00:16.4: irq 81 for MSI/MSI-X
[ 27.615670] ioatdma 0000:00:16.5: irq 82 for MSI/MSI-X
[ 27.616087] ioatdma 0000:00:16.6: irq 83 for MSI/MSI-X
[ 27.616541] ioatdma 0000:00:16.7: irq 84 for MSI/MSI-X
[ 27.768924] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 27.914108] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 27.915363] 8021q: 802.1Q VLAN Support v1.8
[ 28.439826] type=1400 audit(1409097024.866:2): apparmor="STATUS" operation="profile_load" parent=1037 profile="unconfined" name="/sbin/dhclient" pid=1043 comm="apparmor_parser"
[ 28.439833] type=1400 audit(1409097024.866:3): apparmor="STATUS" operation="profile_load" parent=1037 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1043 comm="apparmor_parser"
[ 28.439837] type=1400 audit(1409097024.866:4): apparmor="STATUS" operation="profile_load" parent=1037 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1043 comm="apparmor_parser"
[ 28.439850] type=1400 audit(1409097024.866:5): apparmor="STATUS" operation="profile_replace" parent=1035 profile="unconfined" name="/sbin/dhclient" pid=1040 comm="apparmor_parser"
[ 28.439857] type=1400 audit(1409097024.866:6): apparmor="STATUS" operation="profile_replace" parent=1035 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1040 comm="apparmor_parser"
[ 28.439862] type=1400 audit(1409097024.866:7): apparmor="STATUS" operation="profile_replace" parent=1035 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1040 comm="apparmor_parser"
[ 28.439915] type=1400 audit(1409097024.866:8): apparmor="STATUS" operation="profile_replace" parent=1034 profile="unconfined" name="/sbin/dhclient" pid=1039 comm="apparmor_parser"
[ 28.439922] type=1400 audit(1409097024.866:9): apparmor="STATUS" operation="profile_replace" parent=1034 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1039 comm="apparmor_parser"
[ 28.439927] type=1400 audit(1409097024.866:10): apparmor="STATUS" operation="profile_replace" parent=1034 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1039 comm="apparmor_parser"
[ 28.440336] type=1400 audit(1409097024.866:11): apparmor="STATUS" operation="profile_replace" parent=1038 profile="unconfined" name="/sbin/dhclient" pid=1041 comm="apparmor_parser"
[ 29.127938] bnx2 0000:01:00.1: irq 85 for MSI/MSI-X
[ 29.127952] bnx2 0000:01:00.1: irq 86 for MSI/MSI-X
[ 29.127961] bnx2 0000:01:00.1: irq 87 for MSI/MSI-X
[ 29.127970] bnx2 0000:01:00.1: irq 88 for MSI/MSI-X
[ 29.127979] bnx2 0000:01:00.1: irq 89 for MSI/MSI-X
[ 29.127988] bnx2 0000:01:00.1: irq 90 for MSI/MSI-X
[ 29.127996] bnx2 0000:01:00.1: irq 91 for MSI/MSI-X
[ 29.128005] bnx2 0000:01:00.1: irq 92 for MSI/MSI-X
[ 29.128015] bnx2 0000:01:00.1: irq 93 for MSI/MSI-X
[ 29.193638] bnx2 0000:01:00.1 eth1: using MSIX
[ 29.193680] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 29.193994] bnx2 0000:01:00.0: irq 94 for MSI/MSI-X
[ 29.194002] bnx2 0000:01:00.0: irq 95 for MSI/MSI-X
[ 29.194009] bnx2 0000:01:00.0: irq 96 for MSI/MSI-X
[ 29.194015] bnx2 0000:01:00.0: irq 97 for MSI/MSI-X
[ 29.194021] bnx2 0000:01:00.0: irq 98 for MSI/MSI-X
[ 29.194027] bnx2 0000:01:00.0: irq 99 for MSI/MSI-X
[ 29.194033] bnx2 0000:01:00.0: irq 100 for MSI/MSI-X
[ 29.194039] bnx2 0000:01:00.0: irq 101 for MSI/MSI-X
[ 29.194045] bnx2 0000:01:00.0: irq 102 for MSI/MSI-X
[ 29.253638] bnx2 0000:01:00.0 eth0: using MSIX
[ 29.253832] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.359360] Loading iSCSI transport class v2.0-870.
[ 29.406975] iscsi: registered transport (tcp)
[ 29.778592] iscsi: registered transport (iser)
[ 29.806426] iscsid (1307): /proc/1307/oom_adj is deprecated, please use /proc/1307/oom_score_adj instead.
[ 29.902614] init: failsafe main process (1146) killed by TERM signal
[ 30.870073] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
[ 30.870081] , receive & transmit flow control ON
[ 30.870166] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.279686] nbd: registered device at major 43
[ 31.943719] init: wait-for-state (nova-computelibvirt-bin) main process (1698) killed by TERM signal
[ 34.778417] Ebtables v2.0 registered
[ 35.133024] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.166774] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 39.653427] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 40.840676] Bridge firewalling registered
[ 41.036014] device vlan100 entered promiscuous mode
[ 41.036018] device eth0 entered promiscuous mode
[ 41.036088] br100: port 1(vlan100) entered forwarding state
[ 41.036092] br100: port 1(vlan100) entered forwarding state
[ 41.428992] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 41.428997] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.514985] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.514989] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.517127] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.517130] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.519324] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.519327] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.544006] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.544009] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.546031] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.546034] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.552514] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.552519] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.554486] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.554489] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.556285] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.556289] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.558121] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.558124] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.560043] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.560046] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 42.584597] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 43.742887] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 43.742891] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 45.276304] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 45.276308] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 96.533086] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 96.533093] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 96.731602] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 96.731607] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 96.842604] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 96.842610] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 97.396969] audit_printk_skb: 105 callbacks suppressed
[ 97.396972] type=1400 audit(1409097093.467:47): apparmor="STATUS" operation="profile_load" parent=2506 profile="unconfined" name="libvirt-2d6fbf76-ca6b-4435-b543-2327bba0410b" pid=2507 comm="apparmor_parser"
[ 97.492378] device vnet0 entered promiscuous mode
[ 97.508443] br100: port 2(vnet0) entered forwarding state
[ 97.508451] br100: port 2(vnet0) entered forwarding state
[ 97.874325] cgroup: libvirtd (1723) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 97.874329] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[ 472.922522] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 472.922527] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 473.052912] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 473.052917] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 473.194628] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 473.194632] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 480.908016] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 480.908021] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 1109.423026] perf samples too long (2531 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1802.048140] br100: port 2(vnet0) entered disabled state
[ 1802.048254] device vnet0 left promiscuous mode
[ 1802.048257] br100: port 2(vnet0) entered disabled state
[ 1802.848072] type=1400 audit(1409098798.647:48): apparmor="STATUS" operation="profile_remove" parent=3332 profile="unconfined" name="libvirt-2d6fbf76-ca6b-4435-b543-2327bba0410b" pid=3333 comm="apparmor_parser"
[ 1802.970003] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 1802.970009] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 1898.764633] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 1898.764639] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 1899.196269] type=1400 audit(1409098894.977:49): apparmor="STATUS" operation="profile_load" parent=3418 profile="unconfined" name="libvirt-4546228c-1cd9-44f4-8116-6fda20b6b3ad" pid=3419 comm="apparmor_parser"
[ 1899.287203] device vnet0 entered promiscuous mode
[ 1899.303274] br100: port 2(vnet0) entered forwarding state
[ 1899.303282] br100: port 2(vnet0) entered forwarding state
[ 2867.296964] br100: port 2(vnet0) entered disabled state
[ 2867.297065] device vnet0 left promiscuous mode
[ 2867.297068] br100: port 2(vnet0) entered disabled state
[ 2867.998159] type=1400 audit(1409099863.614:50): apparmor="STATUS" operation="profile_remove" parent=3800 profile="unconfined" name="libvirt-4546228c-1cd9-44f4-8116-6fda20b6b3ad" pid=3801 comm="apparmor_parser"
[ 2868.118408] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 2868.118414] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 2948.749752] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 2948.749758] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 2949.270670] type=1400 audit(1409099944.871:51): apparmor="STATUS" operation="profile_load" parent=3888 profile="unconfined" name="libvirt-2f247b0b-b3cc-486e-a5d5-4b710fac4ca4" pid=3889 comm="apparmor_parser"
[ 2949.351369] device vnet0 entered promiscuous mode
[ 2949.363432] br100: port 2(vnet0) entered forwarding state
[ 2949.363445] br100: port 2(vnet0) entered forwarding state
[ 3072.978557] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 3072.978561] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4241.505410] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4241.505415] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4241.616238] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4241.616244] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4242.023017] device vlan201 entered promiscuous mode
[ 4242.023119] br201: port 1(vlan201) entered forwarding state
[ 4242.023125] br201: port 1(vlan201) entered forwarding state
[ 4242.401626] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4242.401632] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4242.401635] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4242.401638] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4244.687651] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4244.687658] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4244.687661] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4244.687663] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4245.937785] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4245.937789] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4245.937791] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4245.937793] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4246.721865] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4246.721871] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4246.721874] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4246.721877] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4247.242416] type=1400 audit(1409101242.636:52): apparmor="STATUS" operation="profile_load" parent=5126 profile="unconfined" name="libvirt-ece73815-cf24-45c4-8649-15d7e4a4a784" pid=5127 comm="apparmor_parser"
[ 4247.321720] device vnet1 entered promiscuous mode
[ 4247.337829] br201: port 2(vnet1) entered forwarding state
[ 4247.337841] br201: port 2(vnet1) entered forwarding state
[ 4291.567038] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4291.567042] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4291.567044] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4291.567046] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4833.854708] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4833.854715] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.010594] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.010601] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.181877] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.181883] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.568235] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.568242] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.568245] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.568247] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.709965] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.709971] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.709974] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.709976] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.870726] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.870731] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.870732] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4834.870734] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4835.002571] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4835.002576] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4835.002577] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4835.002579] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4837.339045] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4837.339051] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4837.339054] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4837.339056] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4838.819784] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4838.819790] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4838.819793] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 4838.819796] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.