Xorg.0.log - VDPAU
X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.11-2-amd64 x86_64 Debian
Current Operating System: Linux crunchbang 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64
Build Date: 17 December 2013 07:37:58PM
xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau )
Current version of pixman: 0.26.0
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 23 16:05:53 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor ""
(**) | |-->Device "aticonfig-Device[0]-0"
(==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
(**) Option "Xinerama" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7feccb81dae0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 12.1
X.Org XInput driver : 16.0
X.Org Server Extension : 6.0
(--) PCI:*(0:1:0:0) 1002:6819:1458:255a rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="Advanced Micro Devices, Inc."
compiled for 6.9.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.2.0
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
compiled for 1.4.99.906, module version = 14.10.2
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
compiled for 1.4.99.906, module version = 14.10.2
(II) AMD Proprietary Linux Driver Version Identifier:14.10.2
(II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001
(II) AMD Proprietary Linux Driver Build Date: May 5 2014 21:38:38
(++) using VT number 7
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 8, (OK)
ukiOpenByBusid: ukiOpenMinor returns 8
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(--) Chipset Supported AMD Graphics Processor (0x6819) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) fglrx(0): pEnt->device->identifier=0x7fecccdda0b0
(II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 0.1.0
ABI class: X.Org Video Driver, version 12.1
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
compiled for 1.4.99.906, module version = 14.10.2
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 10, (OK)
ukiOpenByBusid: ukiOpenMinor returns 10
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(**) fglrx(0): NoAccel = NO
(**) fglrx(0): AMD 2D Acceleration Architecture enabled
(--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series " (Chipset = 0x6819)
(--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x255a)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xf7e00000
(--) fglrx(0): I/O port at 0x0000e000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.1.0
ABI class: X.Org Video Driver, version 12.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 15.18
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
(II) fglrx(0): VESA VBE OEM Product: PITCAIRN
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): AMD Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) fglrx(0): EDID Management option: EDID Management is enabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Output DFP1 using monitor section 0-DFP1
(**) fglrx(0): Option "PreferredMode" "1920x1200"
(**) fglrx(0): Option "Position" "1280 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output DFP3 has no monitor section
(II) fglrx(0): Output DFP4 has no monitor section
(II) fglrx(0): Output DFP5 has no monitor section
(II) fglrx(0): Output DFP6 has no monitor section
(II) fglrx(0): Output DFP7 has no monitor section
(II) fglrx(0): Output DFP8 has no monitor section
(II) fglrx(0): Output DFP9 has no monitor section
(II) fglrx(0): Output DFP10 using monitor section 0-DFP10
(**) fglrx(0): Option "PreferredMode" "1280x1024"
(**) fglrx(0): Option "Position" "0 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output CRT1 has no monitor section
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP1
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: HWP Model: 26f9 Serial#: 16843009
(II) fglrx(0): Year: 2009 Week: 49
(II) fglrx(0): EDID Version: 1.4
(II) fglrx(0): Digital Display Input
(II) fglrx(0): 8 bits per channel
(II) fglrx(0): Digital interface is DisplayPort
(II) fglrx(0): Max Image Size [cm]: horiz.: 54 vert.: 35
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): Preferred mode is native pixel format and refresh rate
(II) fglrx(0): redX: 0.640 redY: 0.328 greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x864@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #1: hsize: 1600 vsize 1000 refresh: 60 vid: 169
(II) fglrx(0): #2: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) fglrx(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) fglrx(0): #4: hsize: 1920 vsize 1200 refresh: 60 vid: 209
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 154.0 MHz Image Size: 546 x 352 mm
(II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
(II) fglrx(0): Monitor name: HP LP2475w
(II) fglrx(0): Ranges: V min: 48 V max: 85 Hz, H min: 30 H max: 94 kHz, PixClock max 205000 kHz
(II) fglrx(0): Maximum pixel width: 1680
(II) fglrx(0): Supported aspect ratios: 4:3 16:9 16:10* 5:4 15:9
(II) fglrx(0): Supported blankings: standard reduced
(II) fglrx(0): Supported scalings: hshrink hstretch vshrink vstretch
(II) fglrx(0): Buggy monitor, no preferred refresh rate given
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0022f0f92601010101
(II) fglrx(0): 31130104a5362378eece50a3544c9926
(II) fglrx(0): 0f5054a56b808140a900a940b300d100
(II) fglrx(0): 010101010101283c80a070b023403020
(II) fglrx(0): 360022602100001a000000fc00485020
(II) fglrx(0): 4c5032343735770a2020000000fd0030
(II) fglrx(0): 551e5e15041150d2f858f000000000ff
(II) fglrx(0): 00504c43393439303242590a20200062
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: DFP10
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: ENC Model: 1833 Serial#: 16843009
(II) fglrx(0): Year: 2007 Week: 20
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.290 greenY: 0.605
(II) fglrx(0): blueX: 0.145 blueY: 0.075 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
(II) fglrx(0): Monitor name: S1931
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0015c3331801010101
(II) fglrx(0): 1411010380261e78eae415a3544a9b25
(II) fglrx(0): 135054a1080081800101010101010101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000ff00383334
(II) fglrx(0): 30313035370a20202020000000fd003b
(II) fglrx(0): 3d1f400b000a202020202020000000fc
(II) fglrx(0): 0053313933310a20202020202020001e
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Dynamic Surface Resizing Enabled
(II) fglrx(0): EDID for output DFP1
(II) fglrx(0): Manufacturer: HWP Model: 26f9 Serial#: 16843009
(II) fglrx(0): Year: 2009 Week: 49
(II) fglrx(0): EDID Version: 1.4
(II) fglrx(0): Digital Display Input
(II) fglrx(0): 8 bits per channel
(II) fglrx(0): Digital interface is DisplayPort
(II) fglrx(0): Max Image Size [cm]: horiz.: 54 vert.: 35
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): Preferred mode is native pixel format and refresh rate
(II) fglrx(0): redX: 0.640 redY: 0.328 greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x864@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #1: hsize: 1600 vsize 1000 refresh: 60 vid: 169
(II) fglrx(0): #2: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) fglrx(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) fglrx(0): #4: hsize: 1920 vsize 1200 refresh: 60 vid: 209
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 154.0 MHz Image Size: 546 x 352 mm
(II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
(II) fglrx(0): Monitor name: HP LP2475w
(II) fglrx(0): Ranges: V min: 48 V max: 85 Hz, H min: 30 H max: 94 kHz, PixClock max 205000 kHz
(II) fglrx(0): Maximum pixel width: 1680
(II) fglrx(0): Supported aspect ratios: 4:3 16:9 16:10* 5:4 15:9
(II) fglrx(0): Supported blankings: standard reduced
(II) fglrx(0): Supported scalings: hshrink hstretch vshrink vstretch
(II) fglrx(0): Buggy monitor, no preferred refresh rate given
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0022f0f92601010101
(II) fglrx(0): 31130104a5362378eece50a3544c9926
(II) fglrx(0): 0f5054a56b808140a900a940b300d100
(II) fglrx(0): 010101010101283c80a070b023403020
(II) fglrx(0): 360022602100001a000000fc00485020
(II) fglrx(0): 4c5032343735770a2020000000fd0030
(II) fglrx(0): 551e5e15041150d2f858f000000000ff
(II) fglrx(0): 00504c43393439303242590a20200062
(II) fglrx(0): EDID vendor "HWP", prod id 9977
(II) fglrx(0): Using EDID range info for horizontal sync
(II) fglrx(0): Using EDID range info for vertical refresh
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
(II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
(II) fglrx(0): Modeline "1600x1000"x60.0 133.14 1600 1704 1872 2144 1000 1001 1004 1035 -hsync +vsync (62.1 kHz e)
(II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): Printing probed modes for output DFP1
(II) fglrx(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
(II) fglrx(0): Modeline "1920x1080"x60.0 154.00 1920 1968 2000 2080 1080 1203 1209 1235 +hsync -vsync (74.0 kHz)
(II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) fglrx(0): Modeline "1400x1050"x60.0 162.00 1400 1664 1856 2160 1050 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) fglrx(0): Modeline "1280x1024"x60.0 154.00 1280 1968 2000 2080 1024 1203 1209 1235 +hsync -vsync (74.0 kHz)
(II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1440x900"x60.0 132.25 1440 1696 1864 2128 900 1003 1009 1038 -hsync +vsync (62.1 kHz)
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): EDID for output DFP2
(II) fglrx(0): EDID for output DFP3
(II) fglrx(0): EDID for output DFP4
(II) fglrx(0): EDID for output DFP5
(II) fglrx(0): EDID for output DFP6
(II) fglrx(0): EDID for output DFP7
(II) fglrx(0): EDID for output DFP8
(II) fglrx(0): EDID for output DFP9
(II) fglrx(0): EDID for output DFP10
(II) fglrx(0): Manufacturer: ENC Model: 1833 Serial#: 16843009
(II) fglrx(0): Year: 2007 Week: 20
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.290 greenY: 0.605
(II) fglrx(0): blueX: 0.145 blueY: 0.075 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
(II) fglrx(0): Monitor name: S1931
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0015c3331801010101
(II) fglrx(0): 1411010380261e78eae415a3544a9b25
(II) fglrx(0): 135054a1080081800101010101010101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000ff00383334
(II) fglrx(0): 30313035370a20202020000000fd003b
(II) fglrx(0): 3d1f400b000a202020202020000000fc
(II) fglrx(0): 0053313933310a20202020202020001e
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(II) fglrx(0): Printing probed modes for output DFP10
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): EDID for output CRT1
(II) fglrx(0): Output DFP1 connected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output DFP3 disconnected
(II) fglrx(0): Output DFP4 disconnected
(II) fglrx(0): Output DFP5 disconnected
(II) fglrx(0): Output DFP6 disconnected
(II) fglrx(0): Output DFP7 disconnected
(II) fglrx(0): Output DFP8 disconnected
(II) fglrx(0): Output DFP9 disconnected
(II) fglrx(0): Output DFP10 connected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output DFP1 using initial mode 1920x1200
(II) fglrx(0): Output DFP10 using initial mode 1280x1024
(II) fglrx(0): Display dimensions: (540, 350) mm
(II) fglrx(0): DPI set to (60, 74)
(II) fglrx(0): Eyefinity capable adapter detected.
(II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 2 displays connected.
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7feccb42c000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 14.10.2
(II) fglrx(0): Date: May 5 2014
(II) fglrx(0): Desc: AMD FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-4-amd64
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull
(II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x02710000
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 8784
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 2.0.0
(II) Loading extension AMDXVOPL
(II) Loading extension AMDXVBA
(II) fglrx(0): UVD feature is enabled(II) fglrx(0):
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) SELinux: Disabled on system
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 12, (OK)
ukiOpenByBusid: ukiOpenMinor returns 12
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 13, (OK)
ukiGetBusid returned 'PCI:1:0:0'
ukiOpenDevice: node name is /dev/ati/card1
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card2
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card3
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card4
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card5
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card6
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card7
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card8
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card9
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card10
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card11
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card12
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card13
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card14
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card15
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 13, (OK)
ukiOpenByBusid: ukiOpenMinor returns 13
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 14, (OK)
ukiGetBusid returned 'PCI:1:0:0'
ukiOpenDevice: node name is /dev/ati/card1
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card2
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card3
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card4
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card5
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card6
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card7
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card8
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card9
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card10
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card11
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card12
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card13
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card14
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiOpenDevice: node name is /dev/ati/card15
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: open result is -1, (No such device)
ukiOpenDevice: Open failed
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 14, (OK)
ukiOpenByBusid: ukiOpenMinor returns 14
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): OverDrive5 Detected!
(II) fglrx(0): Setting screen physical size to 846 x 317
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.12.1, module version = 2.7.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 16.0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event4"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Samson Technologies Samson GoMic (/dev/input/event1)
(**) Samson Technologies Samson GoMic: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Samson Technologies Samson GoMic'
(**) Samson Technologies Samson GoMic: always reports core events
(**) evdev: Samson Technologies Samson GoMic: Device: "/dev/input/event1"
(--) evdev: Samson Technologies Samson GoMic: Vendor 0x17a0 Product 0x302
(--) evdev: Samson Technologies Samson GoMic: Found keys
(II) evdev: Samson Technologies Samson GoMic: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.3/input/input1/event1"
(II) XINPUT: Adding extended input device "Samson Technologies Samson GoMic" (type: KEYBOARD, id 8)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Logitech Gaming Mouse G400 (/dev/input/event2)
(**) Logitech Gaming Mouse G400: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Logitech Gaming Mouse G400'
(**) Logitech Gaming Mouse G400: always reports core events
(**) evdev: Logitech Gaming Mouse G400: Device: "/dev/input/event2"
(--) evdev: Logitech Gaming Mouse G400: Vendor 0x46d Product 0xc245
(--) evdev: Logitech Gaming Mouse G400: Found 12 mouse buttons
(--) evdev: Logitech Gaming Mouse G400: Found scroll wheel(s)
(--) evdev: Logitech Gaming Mouse G400: Found relative axes
(--) evdev: Logitech Gaming Mouse G400: Found x and y relative axes
(II) evdev: Logitech Gaming Mouse G400: Configuring as mouse
(II) evdev: Logitech Gaming Mouse G400: Adding scrollwheel support
(**) evdev: Logitech Gaming Mouse G400: YAxisMapping: buttons 4 and 5
(**) evdev: Logitech Gaming Mouse G400: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/input/input2/event2"
(II) XINPUT: Adding extended input device "Logitech Gaming Mouse G400" (type: MOUSE, id 9)
(II) evdev: Logitech Gaming Mouse G400: initialized for relative axes.
(**) Logitech Gaming Mouse G400: (accel) keeping acceleration scheme 1
(**) Logitech Gaming Mouse G400: (accel) acceleration profile 0
(**) Logitech Gaming Mouse G400: (accel) acceleration factor: 2.000
(**) Logitech Gaming Mouse G400: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech Gaming Mouse G400 (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
(--) evdev: AT Translated Set 2 keyboard: Found keys
(II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device PC Speaker (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): EDID vendor "ENC", prod id 6195
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): EDID vendor "ENC", prod id 6195
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): EDID vendor "ENC", prod id 6195
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(II) fglrx(0): Desktop Vsync is enabled.
(WW) fglrx(0): TFD direct rotation is not supported currently with multi-viewport screen
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): EDID vendor "ENC", prod id 6195
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): EDID vendor "ENC", prod id 6195
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): EDID vendor "ENC", prod id 6195
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): EDID vendor "ENC", prod id 6195
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): EDID vendor "ENC", prod id 6195
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): EDID vendor "ENC", prod id 6195
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.