dmesg - cdh
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FC0000000 write-back
3 base 0C0000000 mask FC0000000 uncachable
4 base 0BF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 4GB, type WB
reg 2, base: 12GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3064MB, range: 8MB, type UC
total RAM covered: 12280M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 4GB, type WB
reg 5, base: 12GB, range: 1GB, type WB
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x33fe00000-0x33fffffff]
[mem 0x33fe00000-0x33fffffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x33c000000-0x33fdfffff]
[mem 0x33c000000-0x33fdfffff] page 2M
init_memory_mapping: [mem 0x300000000-0x33bffffff]
[mem 0x300000000-0x33bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf77ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
RAMDISK: [mem 0x35ba0000-0x36dc7fff]
ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
ACPI: XSDT 00000000bf780100 000064 (v01 080912 XSDT1157 20120809 MSFT 00000097)
ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
ACPI: FACS 00000000bf798000 000040
ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
ACPI: ASPT 00000000bf7983f0 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
ACPI: SSDT 00000000bf79b0f0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
Initmem setup node 0 [mem 0x00000000-0x33fffffff]
NODE_DATA [mem 0x33fff2000-0x33fff6fff]
[ffffea0000000000-ffffea000cffffff] PMD -> [ffff880333600000-ffff88033f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x33fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbf77ffff]
node 0: [mem 0x100000000-0x33fffffff]
On node 0 totalpages: 3143452
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12190 pages used for memmap
DMA32 zone: 780160 pages, LIFO batch:31
Normal zone: 36864 pages used for memmap
Normal zone: 2359296 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88033fc00000 s86336 r8192 d24256 u131072
pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3094313
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12274044K/12573808K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 299764K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
NR_IRQS:16640 nr_irqs:1216 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3340.793 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6681.58 BogoMIPS (lpj=13363172)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 975 @ 3.33GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (53452.68 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 13:41:00, date: 08/23/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf798430 00265C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 00000000bf79aa90 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf7dff000-0xf7dff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7df8000-0xf7dfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf7dfe000-0xf7dfe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7dfc000-0xf7dfc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7dfd000-0xf7dfd0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
pci 0000:01:00.0: reg 0x24: [mem 0xf7eff000-0xf7eff7ff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7ee0000-0xf7eeffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10b5:8747] type 01 class 0x060400
pci 0000:03:00.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 03-06]
pci 0000:00:03.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xf7f00000-0xfbdfffff]
pci 0000:00:03.0: bridge window [mem 0xc8000000-0xdfffffff 64bit pref]
pci 0000:04:08.0: [10b5:8747] type 01 class 0x060400
pci 0000:04:08.0: PME# supported from D0 D3hot D3cold
pci 0000:04:10.0: [10b5:8747] type 01 class 0x060400
pci 0000:04:10.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-06]
pci 0000:03:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:03:00.0: bridge window [mem 0xf8000000-0xfbdfffff]
pci 0000:03:00.0: bridge window [mem 0xc8000000-0xdfffffff 64bit pref]
pci 0000:05:00.0: [10de:1188] type 00 class 0x030200
pci 0000:05:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
pci 0000:05:00.0: reg 0x14: [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:05:00.0: reg 0x1c: [mem 0xd4000000-0xd5ffffff 64bit pref]
pci 0000:05:00.0: reg 0x24: [io 0xcc00-0xcc7f]
pci 0000:05:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:05:00.1: reg 0x10: [mem 0xf9ffc000-0xf9ffffff]
pci 0000:04:08.0: PCI bridge to [bus 05]
pci 0000:04:08.0: bridge window [io 0xc000-0xcfff]
pci 0000:04:08.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:04:08.0: bridge window [mem 0xc8000000-0xd5ffffff 64bit pref]
pci 0000:06:00.0: [10de:1188] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:06:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
pci 0000:06:00.0: reg 0x24: [io 0xdc00-0xdc7f]
pci 0000:06:00.0: reg 0x30: [mem 0xfbd00000-0xfbd7ffff pref]
pci 0000:06:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:06:00.1: reg 0x10: [mem 0xfbdfc000-0xfbdfffff]
pci 0000:04:10.0: PCI bridge to [bus 06]
pci 0000:04:10.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:10.0: bridge window [mem 0xfa000000-0xfbdfffff]
pci 0000:04:10.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 09]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:0a:01.0: [10ec:8167] type 00 class 0x020000
pci 0000:0a:01.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:0a:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
pci 0000:0a:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:0a:01.0: supports D1 D2
pci 0000:0a:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0a:02.0: [1106:3044] type 00 class 0x0c0010
pci 0000:0a:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
pci 0000:0a:02.0: reg 0x14: [io 0xec00-0xec7f]
pci 0000:0a:02.0: supports D2
pci 0000:0a:02.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0290-0x029f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] could not be reserved
system 00:06: [io 0x0500-0x057f] could not be reserved
system 00:06: [io 0x0600-0x0607] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 400000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 400000
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0400000-0xc07fffff]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:04:08.0: PCI bridge to [bus 05]
pci 0000:04:08.0: bridge window [io 0xc000-0xcfff]
pci 0000:04:08.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:04:08.0: bridge window [mem 0xc8000000-0xd5ffffff 64bit pref]
pci 0000:04:10.0: PCI bridge to [bus 06]
pci 0000:04:10.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:10.0: bridge window [mem 0xfa000000-0xfbdfffff]
pci 0000:04:10.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04-06]
pci 0000:03:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:03:00.0: bridge window [mem 0xf8000000-0xfbdfffff]
pci 0000:03:00.0: bridge window [mem 0xc8000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03-06]
pci 0000:00:03.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xf7f00000-0xfbdfffff]
pci 0000:00:03.0: bridge window [mem 0xc8000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 09]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc07fffff]
pci 0000:00:1c.4: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7f00000-0xfbdfffff]
pci_bus 0000:03: resource 2 [mem 0xc8000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0xc8000000-0xdfffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 [mem 0xc8000000-0xd5ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:09: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:09: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xc0400000-0xc07fffff]
pci_bus 0000:08: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:0a: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:0a: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Boot video device
PCI: CLS mismatch (256 != 64), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18592K (ffff880035ba0000 - ffff880036dc8000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x15
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1408801260.580:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 24009
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.4: enabling device (0106 -> 0107)
pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
pcieport 0000:03:00.0: irq 66 for MSI/MSI-X
pcieport 0000:04:08.0: irq 67 for MSI/MSI-X
pcieport 0000:04:10.0: irq 68 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 3840x2160x16, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd7000000, mapped to 0xffffc90011b80000, using 16256k, total 16256k
Console: switching to colour frame buffer device 480x135
tsc: Refined TSC clocksource calibration: 3340.909 MHz
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7dff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7dfe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:252:686
rtc_cmos 00:02: setting system clock to 2014-08-23 13:41:02 UTC (1408801262)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[162]: starting version 204
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 69 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:01.0 (unregistered net_device): not PCI Express
r8169 0000:0a:01.0 eth0: RTL8169sc/8110sc at 0xffffc900018fa000, bc:ae:c5:0a:5f:e1, XID 18000000 IRQ 19
r8169 0000:0a:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc100 irq 69
ata2: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc180 irq 69
ata3: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc200 irq 69
ata4: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc280 irq 69
ata5: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc300 irq 69
ata6: SATA max UDMA/133 abar m2048@0xf7dfc000 port 0xf7dfc380 irq 69
ahci 0000:01:00.0: irq 70 for MSI/MSI-X
ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq fbs pio
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf7eff000 port 0xf7eff100 irq 70
ata8: SATA max UDMA/133 abar m2048@0xf7eff000 port 0xf7eff180 irq 70
ata9: SATA max UDMA/133 abar m2048@0xf7eff000 port 0xf7eff200 irq 70
ata10: SATA max UDMA/133 abar m2048@0xf7eff000 port 0xf7eff280 irq 70
ata11: SATA max UDMA/133 abar m2048@0xf7eff000 port 0xf7eff300 irq 70
ata12: SATA max UDMA/133 abar m2048@0xf7eff000 port 0xf7eff380 irq 70
ata13: SATA max UDMA/133 abar m2048@0xf7eff000 port 0xf7eff400 irq 70
ata14: SATA max UDMA/133 abar m2048@0xf7eff000 port 0xf7eff480 irq 70
firewire_ohci 0000:0a:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata1: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
ata7.00: ATA-9: INTEL SSDSC2CW180A3, 400i, max UDMA/133
ata7.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
firewire_core 0000:0a:02.0: created device fw0: GUID 001fc600000601c8, S400
usb 8-1: new full-speed USB device number 2 using uhci_hcd
Switched to clocksource tsc
usb 8-1: New USB device found, idVendor=046d, idProduct=c52b
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB Receiver
usb 8-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input2
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
input: Logitech Unifying Device. Wireless PID:2007 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/input/input4
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2007] on usb-0000:00:1d.2-1:1
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/input/input5
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Crucial_CT960M500SSD1, MU05, max UDMA/133
ata2.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:1d.2-1:2
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Crucial_CT960M50 MU05 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 >
sd 2:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access ATA INTEL SSDSC2CW18 400i PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 351651888 512-byte logical blocks: (180 GB/167 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 13:0:0:0: Attached scsi generic sg3 type 3
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
random: init urandom read with 55 bits of entropy available
init: plymouth-upstart-bridge main process (255) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (265) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (268) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (271) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (276) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 16713724k swap on /dev/sdb5. Priority:-1 extents:1 across:16713724k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[377]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
ATK0110 ATK0110:00: Overriding interface detection
EDAC MC: Ver: 3.0.0
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 71 for MSI/MSI-X
MXM: GUID detected in BIOS
checking generic (d7000000 fe0000) vs hw (c8000000 8000000)
checking generic (d7000000 fe0000) vs hw (d4000000 2000000)
nouveau [ DEVICE][0000:05:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:05:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:05:00.0] Family : NVE0
nouveau [ VBIOS][0000:05:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:05:00.0] ... signature not found
nouveau [ VBIOS][0000:05:00.0] checking PROM for image...
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
input: HDA Intel SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
nouveau [ VBIOS][0000:05:00.0] ... appears to be valid
nouveau [ VBIOS][0000:05:00.0] using image from PROM
nouveau [ VBIOS][0000:05:00.0] BIT signature found
nouveau [ VBIOS][0000:05:00.0] version 80.04.1e.00.0e
nouveau [ DEVINIT][0000:05:00.0] adaptor not initialised
nouveau [ VBIOS][0000:05:00.0] running init tables
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
random: nonblocking pool is initialized
nouveau 0000:05:00.0: irq 72 for MSI/MSI-X
nouveau [ PMC][0000:05:00.0] MSI interrupts enabled
nouveau [ PFB][0000:05:00.0] RAM type: GDDR5
nouveau [ PFB][0000:05:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:05:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:05:00.0] GPU voltage: 987500uv
nouveau [ PTHERM][0000:05:00.0] FAN control: none / external
nouveau [ PTHERM][0000:05:00.0] fan management: automatic
nouveau [ PTHERM][0000:05:00.0] internal sensor: yes
nouveau [ CLK][0000:05:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:05:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:05:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:05:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:05:00.0] --: core 324 MHz memory 324 MHz
[TTM] Zone kernel: Available graphics memory: 6147776 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB outp 02: 08011f82 00020030
nouveau [ DRM] DCB outp 03: 04832fb6 0f420010
nouveau [ DRM] DCB outp 04: 04032f72 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 01000131
nouveau [ DRM] DCB conn 02: 00020246
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
[drm] Initialized nouveau 1.1.1 20120801 for 0000:05:00.0 on minor 0
checking generic (d7000000 fe0000) vs hw (d8000000 8000000)
checking generic (d7000000 fe0000) vs hw (d6000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
hda_intel: Disabling MSI
hda-intel 0000:05:00.1: Disabling 64bit DMA
hda-intel 0000:05:00.1: Enable delay in RIRB handling
type=1400 audit(1408801265.914:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=508 comm="apparmor_parser"
type=1400 audit(1408801265.914:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
type=1400 audit(1408801265.914:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
type=1400 audit(1408801265.914:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
type=1400 audit(1408801265.914:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
type=1400 audit(1408801265.914:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
type=1400 audit(1408801265.918:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=526 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:08.0/0000:05:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:08.0/0000:05:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:08.0/0000:05:00.1/sound/card1/input16
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:06:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:06:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:06:00.0] Family : NVE0
nouveau [ VBIOS][0000:06:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:06:00.0] ... signature not found
nouveau [ VBIOS][0000:06:00.0] checking PROM for image...
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
type=1400 audit(1408801266.418:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=634 comm="apparmor_parser"
type=1400 audit(1408801266.418:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=634 comm="apparmor_parser"
type=1400 audit(1408801266.418:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=634 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
nouveau [ VBIOS][0000:06:00.0] ... appears to be valid
nouveau [ VBIOS][0000:06:00.0] using image from PROM
nouveau [ VBIOS][0000:06:00.0] BIT signature found
nouveau [ VBIOS][0000:06:00.0] version 80.04.1e.00.0f
nouveau 0000:06:00.0: irq 73 for MSI/MSI-X
nouveau [ PMC][0000:06:00.0] MSI interrupts enabled
nouveau [ PFB][0000:06:00.0] RAM type: GDDR5
nouveau [ PFB][0000:06:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:06:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:06:00.0] GPU voltage: 987500uv
systemd-udevd[414]: renamed network interface eth0 to eth12
nouveau [ PTHERM][0000:06:00.0] FAN control: none / external
nouveau [ PTHERM][0000:06:00.0] fan management: automatic
nouveau [ PTHERM][0000:06:00.0] internal sensor: yes
nouveau [ CLK][0000:06:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:06:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:06:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:06:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:06:00.0] --: core 324 MHz memory 324 MHz
init: failsafe main process (665) killed by TERM signal
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB conn 00: 00001030
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
type=1400 audit(1408801266.558:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ntpd" pid=800 comm="apparmor_parser"
type=1400 audit(1408801266.558:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=802 comm="apparmor_parser"
type=1400 audit(1408801266.558:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=795 comm="apparmor_parser"
type=1400 audit(1408801266.558:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=795 comm="apparmor_parser"
type=1400 audit(1408801266.558:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=795 comm="apparmor_parser"
type=1400 audit(1408801266.558:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=795 comm="apparmor_parser"
type=1400 audit(1408801266.558:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=795 comm="apparmor_parser"
nouveau [ DRM] MM: using COPY for buffer copies
r8169 0000:0a:01.0 eth12: link down
r8169 0000:0a:01.0 eth12: link down
IPv6: ADDRCONF(NETDEV_UP): eth12: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth12: link is not ready
nouveau [ DRM] allocated 3840x2160 fb: 0x80000, bo ffff88032cb71000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 480x135
nouveau 0000:06:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:06:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:06:00.0 on minor 1
hda_intel: Disabling MSI
hda-intel 0000:06:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:06:00.1: Disabling 64bit DMA
hda-intel 0000:06:00.1: Enable delay in RIRB handling
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1153) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:10.0/0000:06:00.1/sound/card2/input19
r8169 0000:0a:01.0 eth12: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth12: link becomes ready
pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xe0 [nouveau] returns -22
audit_printk_skb: 84 callbacks suppressed
type=1400 audit(1408794458.753:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=8131 comm="apparmor_parser"
type=1400 audit(1408794458.753:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=8131 comm="apparmor_parser"
type=1400 audit(1408794458.753:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=8131 comm="apparmor_parser"
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.709 msecs
perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (16721 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.805 msecs
perf samples too long (16610 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
conftest[12220]: segfault at 0 ip 00000000004005c0 sp 00007ffffb79a6e0 error 4 in conftest[400000+1000]
conftest[12249]: segfault at 0 ip 00007ffef00cf0a6 sp 00007fff0fdac0d8 error 4 in libc-2.19.so[7ffeeff8e000+1bc000]