dmesg - hpz230
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.23.3.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Tue Jul 29 11:12:56 CDT 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000091c00 (usable)
BIOS-e820: 0000000000091c00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000ce980000 (usable)
BIOS-e820: 00000000ce980000 - 00000000d7f80000 (reserved)
BIOS-e820: 00000000d7f80000 - 00000000dd017000 (usable)
BIOS-e820: 00000000dd017000 - 00000000dd01e000 (ACPI NVS)
BIOS-e820: 00000000dd01e000 - 00000000dd465000 (usable)
BIOS-e820: 00000000dd465000 - 00000000dd7fb000 (reserved)
BIOS-e820: 00000000dd7fb000 - 00000000ddee5000 (usable)
BIOS-e820: 00000000ddee5000 - 00000000ddf6d000 (ACPI NVS)
BIOS-e820: 00000000ddf6d000 - 00000000ddfdb000 (usable)
BIOS-e820: 00000000ddfdb000 - 00000000de05c000 (reserved)
BIOS-e820: 00000000de05c000 - 00000000de062000 (usable)
BIOS-e820: 00000000de062000 - 00000000de077000 (ACPI data)
BIOS-e820: 00000000de077000 - 00000000dee68000 (usable)
BIOS-e820: 00000000dee68000 - 00000000deea8000 (reserved)
BIOS-e820: 00000000deea8000 - 00000000deef5000 (usable)
BIOS-e820: 00000000deef5000 - 00000000def25000 (reserved)
BIOS-e820: 00000000def25000 - 00000000def3d000 (usable)
BIOS-e820: 00000000def3d000 - 00000000def43000 (ACPI NVS)
BIOS-e820: 00000000def43000 - 00000000def45000 (reserved)
BIOS-e820: 00000000def45000 - 00000000def47000 (ACPI NVS)
BIOS-e820: 00000000def47000 - 00000000def51000 (reserved)
BIOS-e820: 00000000def51000 - 00000000def62000 (ACPI NVS)
BIOS-e820: 00000000def62000 - 00000000def8e000 (reserved)
BIOS-e820: 00000000def8e000 - 00000000def95000 (ACPI NVS)
BIOS-e820: 00000000def95000 - 00000000defe5000 (reserved)
BIOS-e820: 00000000defe5000 - 00000000deffd000 (usable)
BIOS-e820: 00000000deffd000 - 00000000defff000 (reserved)
BIOS-e820: 00000000defff000 - 00000000df000000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000021e000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF9BF0
DMI: Hewlett-Packard HP Z230 SFF Workstation/1906, BIOS L51 v01.13 10/18/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x21e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-E9FFF uncachable
EA000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FF0000000 write-back
2 base 0210000000 mask 7FF8000000 write-back
3 base 0218000000 mask 7FFC000000 write-back
4 base 021C000000 mask 7FFE000000 write-back
5 base 00E0000000 mask 7FE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 256MB, type WB
reg 2, base: 8448MB, range: 128MB, type WB
reg 3, base: 8576MB, range: 64MB, type WB
reg 4, base: 8640MB, range: 32MB, type WB
reg 5, base: 3584MB, range: 512MB, type UC
total RAM covered: 8160M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8672MB, range: 32MB, type UC
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000df000000
0000000000 - 00c0000000 page 1G
00c0000000 - 00df000000 page 2M
kernel direct mapping tables up to df000000 @ 8000-a000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000021e000000
0100000000 - 0200000000 page 1G
0200000000 - 021e000000 page 2M
kernel direct mapping tables up to 21e000000 @ 9000-b000
RAMDISK: 36f42000 - 37fefa1a
ACPI: RSDP 00000000000f9810 00024 (v02 HPQOEM)
ACPI: XSDT 00000000de062080 00084 (v01 HPQOEM SLIC-WKS 20130829 AMI 00010013)
ACPI: FACP 00000000de06ccc0 0010C (v05 HPQOEM SLIC-WKS 20130829 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
ACPI: DSDT 00000000de062198 0AB21 (v02 HPQOEM SLIC-WKS 00000001 INTL 20091112)
ACPI: FACS 00000000def93080 00040
ACPI: APIC 00000000de06cdd0 00092 (v03 HPQOEM SLIC-WKS 20130829 AMI 00010013)
ACPI: FPDT 00000000de06ce68 00044 (v01 HPQOEM SLIC-WKS 20130829 AMI 00010013)
ACPI: SSDT 00000000de06ceb0 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000de06d3f0 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 00000000de06dec8 001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117)
ACPI: MCFG 00000000de06e090 0003C (v01 HPQOEM SLIC-WKS 20130829 MSFT 00000097)
ACPI: HPET 00000000de06e0d0 00038 (v01 HPQOEM SLIC-WKS 20130829 AMI. 00000005)
ACPI: SSDT 00000000de06e108 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000de06e478 02433 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: SSDT 00000000de0708b0 065E4 (v01 COMPAQ WMI 00000001 MSFT 03000001)
ACPI: ASF! 00000000de076e98 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000021e000000
Bootmem setup node 0 0000000000000000-000000021e000000
NODE_DATA [000000000000a000 - 000000000003dfff]
bootmap [000000000003e000 - 0000000000081bff] pages 44
(8 early reservations) ==> bootmem [0000000000 - 021e000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [0036f42000 - 0037fefa1a] RAMDISK ==> [0036f42000 - 0037fefa1a]
#4 [0000091c00 - 0000100000] BIOS reserved ==> [0000091c00 - 0000100000]
#5 [0002021000 - 00020212d5] BRK ==> [0002021000 - 00020212d5]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
#7 [0000009000 - 000000a000] PGTABLE ==> [0000009000 - 000000a000]
found SMP MP-table at [ffff8800000f4f80] f4f80
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 8672MB)
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0021e000
Movable zone start PFN for each node
early_node_map[13] active PFN ranges
0: 0x00000001 -> 0x00000091
0: 0x00000100 -> 0x000ce980
0: 0x000d7f80 -> 0x000dd017
0: 0x000dd01e -> 0x000dd465
0: 0x000dd7fb -> 0x000ddee5
0: 0x000ddf6d -> 0x000ddfdb
0: 0x000de05c -> 0x000de062
0: 0x000de077 -> 0x000dee68
0: 0x000deea8 -> 0x000deef5
0: 0x000def25 -> 0x000def3d
0: 0x000defe5 -> 0x000deffd
0: 0x000defff -> 0x000df000
0: 0x00100000 -> 0x0021e000
On node 0 totalpages: 2044859
DMA zone: 56 pages used for memmap
DMA zone: 115 pages reserved
DMA zone: 3813 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 855139 pages, LIFO batch:31
Normal zone: 16016 pages used for memmap
Normal zone: 1155440 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000091000 - 0000000000092000
PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000ce980000 - 00000000d7f80000
PM: Registered nosave memory: 00000000dd017000 - 00000000dd01e000
PM: Registered nosave memory: 00000000dd465000 - 00000000dd7fb000
PM: Registered nosave memory: 00000000ddee5000 - 00000000ddf6d000
PM: Registered nosave memory: 00000000ddfdb000 - 00000000de05c000
PM: Registered nosave memory: 00000000de062000 - 00000000de077000
PM: Registered nosave memory: 00000000dee68000 - 00000000deea8000
PM: Registered nosave memory: 00000000deef5000 - 00000000def25000
PM: Registered nosave memory: 00000000def3d000 - 00000000def43000
PM: Registered nosave memory: 00000000def43000 - 00000000def45000
PM: Registered nosave memory: 00000000def45000 - 00000000def47000
PM: Registered nosave memory: 00000000def47000 - 00000000def51000
PM: Registered nosave memory: 00000000def51000 - 00000000def62000
PM: Registered nosave memory: 00000000def62000 - 00000000def8e000
PM: Registered nosave memory: 00000000def8e000 - 00000000def95000
PM: Registered nosave memory: 00000000def95000 - 00000000defe5000
PM: Registered nosave memory: 00000000deffd000 - 00000000defff000
PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at df000000 (gap: df000000:19000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2014392
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 7830476k/8880128k available (5330k kernel code, 700692k absent, 348960k reserved, 7009k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3392.284 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.56 BogoMIPS (lpj=3392284)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21786 entries in 86 pages
x2apic not enabled, IRQ remapping init failed
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz stepping 03
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (54276.54 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at dd017000 (28672 bytes)
PM: Registering ACPI NVS region at ddee5000 (557056 bytes)
PM: Registering ACPI NVS region at def3d000 (24576 bytes)
PM: Registering ACPI NVS region at def45000 (8192 bytes)
PM: Registering ACPI NVS region at def51000 (69632 bytes)
PM: Registering ACPI NVS region at def8e000 (28672 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:14.0: reg 10: [mem 0xf7120000-0xf712ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xf713c000-0xf713c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.3: reg 10: [io 0xf0a0-0xf0a7]
pci 0000:00:16.3: reg 14: [mem 0xf713a000-0xf713afff]
pci 0000:00:19.0: reg 10: [mem 0xf7100000-0xf711ffff]
pci 0000:00:19.0: reg 14: [mem 0xf7139000-0xf7139fff]
pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf7138000-0xf71383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf7130000-0xf7133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf7137000-0xf71373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7136000-0xf71367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7135000-0xf71350ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
hpet: hpet6 irq 28 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x002e-0x002f]
pnp 00:06: [io 0x004e-0x004f]
pnp 00:06: [io 0x0061]
pnp 00:06: [io 0x0063]
pnp 00:06: [io 0x0065]
pnp 00:06: [io 0x0067]
pnp 00:06: [io 0x0070]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0092]
pnp 00:06: [io 0x00b2-0x00b3]
pnp 00:06: [io 0x0680-0x069f]
pnp 00:06: [io 0xffff]
pnp 00:06: [io 0xffff]
pnp 00:06: [io 0xffff]
pnp 00:06: [io 0x0400-0x047f]
pnp 00:06: [io 0x0500-0x057f]
pnp 00:06: [io 0x164e-0x164f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0070-0x0077]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x1854-0x1857]
pnp 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0a20-0x0a3f]
pnp 00:09: [io 0x0800-0x07ff disabled]
pnp 00:09: [io 0x0a10-0x0a1f]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0c: [io 0x0010-0x001f]
pnp 00:0c: [io 0x0022-0x003f]
pnp 00:0c: [io 0x0044-0x005f]
pnp 00:0c: [io 0x0062-0x0063]
pnp 00:0c: [io 0x0065-0x006f]
pnp 00:0c: [io 0x0072-0x007f]
pnp 00:0c: [io 0x0080]
pnp 00:0c: [io 0x0084-0x0086]
pnp 00:0c: [io 0x0088]
pnp 00:0c: [io 0x008c-0x008e]
pnp 00:0c: [io 0x0090-0x009f]
pnp 00:0c: [io 0x00a2-0x00bf]
pnp 00:0c: [io 0x00e0-0x00ef]
pnp 00:0c: [io 0x04d0-0x04d1]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [io 0x03f8-0x03ff]
pnp 00:0d: [irq 4]
pnp 00:0d: [dma 0 disabled]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0e: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0e: [mem 0xfed10000-0xfed17fff]
pnp 00:0e: [mem 0xfed18000-0xfed18fff]
pnp 00:0e: [mem 0xfed19000-0xfed19fff]
pnp 00:0e: [mem 0xf8000000-0xfbffffff]
pnp 00:0e: [mem 0xfed20000-0xfed3ffff]
pnp 00:0e: [mem 0xfed90000-0xfed93fff]
pnp 00:0e: [mem 0xfed45000-0xfed8ffff]
pnp 00:0e: [mem 0xff000000-0xffffffff]
pnp 00:0e: [mem 0xfee00000-0xfeefffff]
pnp 00:0e: [mem 0xf7fef000-0xf7feffff]
pnp 00:0e: [mem 0xf7ff0000-0xf7ff0fff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0x0400-0x047f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x164e-0x164f] has been reserved
system 00:08: [io 0x1854-0x1857] has been reserved
system 00:09: [io 0x0a20-0x0a3f] has been reserved
system 00:09: [io 0x0a10-0x0a1f] has been reserved
system 00:0c: [io 0x04d0-0x04d1] has been reserved
system 00:0e: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0e: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0e: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0e: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0e: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0e: [mem 0xff000000-0xffffffff] has been reserved
system 00:0e: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0e: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:0e: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17078k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1407998164.379:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15327
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 970DD299E15A8A25
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 29 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000def19c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000def19618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000def18d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[Firmware Bug]: No valid trip found
ACPI: Invalid active2 threshold
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 19) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7138000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7137000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2014-08-14 06:36:05 UTC (1407998165)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 796k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
ACPI: WMI: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:00:14.0: irq 30 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x3 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 31
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 31
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Refined TSC clocksource calibration: 3392.145 MHz.
Switching to clocksource tsc
usb 3-4: new low speed USB device number 2 using xhci_hcd
usb 3-4: New USB device found, idVendor=10d5, idProduct=5b08
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: KVM A1
usb 3-4: Manufacturer: No brand
usb 3-4: configuration #1 chosen from 1 choice
usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: No brand KVM A1 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input3
generic-usb 0003:10D5:5B08.0001: input,hidraw0: USB HID v1.10 Keyboard [No brand KVM A1] on usb-0000:00:14.0-4/input0
input: No brand KVM A1 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input4
generic-usb 0003:10D5:5B08.0002: input,hidraw1: USB HID v1.10 Mouse [No brand KVM A1] on usb-0000:00:14.0-4/input1
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATAPI: hp CDDVDW SH-216DB, HH10, max UDMA/100, ATAPI AN
ata1.00: ATA-8: WDC WD1600HLFS-60G6U0, 04.04V02, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD1600HLFS-6 04.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM hp CDDVDW SH-216DB HH10 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda2
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1407998167.626:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: registered PHC clock
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 74:46:a0:b2:95:b5
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
ACPI: resource (null) [io 0x0428-0x042f] conflicts with ACPI region PMIO [io 0x400-0x47f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: resource (null) [io 0x0500-0x053f] conflicts with ACPI region GPRL [io 0x500-0x53f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0xf000-0xf01f] conflicts with ACPI region SMBI [io 0xf000-0xf00f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x16
platform microcode: firmware: requesting intel-ucode/06-3c-03
Microcode Update Driver: v2.00 , Peter Oruba
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 updated to revision 0x1a, date = 2014-05-23
microcode: CPU1 updated to revision 0x1a, date = 2014-05-23
microcode: CPU2 updated to revision 0x1a, date = 2014-05-23
microcode: CPU3 updated to revision 0x1a, date = 2014-05-23
microcode: CPU4 updated to revision 0x1a, date = 2014-05-23
microcode: CPU5 updated to revision 0x1a, date = 2014-05-23
microcode: CPU6 updated to revision 0x1a, date = 2014-05-23
microcode: CPU7 updated to revision 0x1a, date = 2014-05-23
kvm: disabled by bios
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
Adding 4194296k swap on /dev/sda5. Priority:-1 extents:1 across:4194296k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
8021q: adding VLAN 0 to HW filter on device virbr0
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
lo: Disabled Privacy Extensions
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.67 Fri Apr 4 13:48:39 PDT 2014
nvidia_uvm: Loaded the UVM driver, major device number 245
nvidia_uvm: Unregistered the UVM driver
nvidia 0000:01:00.0: PCI INT A disabled
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.67 Fri Apr 4 13:48:39 PDT 2014
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
nvidia 0000:01:00.0: irq 34 for MSI/MSI-X
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.13)
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A