dmesg - firsttest
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-031600-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201408031935 SMP Sun Aug 3 23:36:11 UTC 2014
Command line: BOOT_IMAGE=/vmlinuz-3.16.0-031600-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bb0a0fff] usable
BIOS-e820: [mem 0x00000000bb0a1000-0x00000000bb0a7fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb0a8000-0x00000000bb812fff] usable
BIOS-e820: [mem 0x00000000bb813000-0x00000000bba4dfff] reserved
BIOS-e820: [mem 0x00000000bba4e000-0x00000000cc4cdfff] usable
BIOS-e820: [mem 0x00000000cc4ce000-0x00000000cc82bfff] reserved
BIOS-e820: [mem 0x00000000cc82c000-0x00000000cc868fff] usable
BIOS-e820: [mem 0x00000000cc869000-0x00000000cc90efff] ACPI NVS
BIOS-e820: [mem 0x00000000cc90f000-0x00000000ccf85fff] reserved
BIOS-e820: [mem 0x00000000ccf86000-0x00000000ccffefff] type 20
BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xcc8eb000 ACPI 2.0=0xcc8eb000 SMBIOS=0xf04c0 MPS=0xfd4d0
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000058000) (0MB)
efi: mem02: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
efi: mem03: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
efi: mem04: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
efi: mem05: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem06: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x00000000014e2000) (19MB)
efi: mem08: type=7, attr=0xf, range=[0x00000000014e2000-0x0000000002000000) (11MB)
efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x00000000033e2000) (19MB)
efi: mem10: type=7, attr=0xf, range=[0x00000000033e2000-0x00000000347bc000) (787MB)
efi: mem11: type=2, attr=0xf, range=[0x00000000347bc000-0x00000000363d6000) (28MB)
efi: mem12: type=7, attr=0xf, range=[0x00000000363d6000-0x0000000087b3a000) (1303MB)
efi: mem13: type=2, attr=0xf, range=[0x0000000087b3a000-0x00000000b7b6d000) (768MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000b7b6d000-0x00000000bad99000) (50MB)
efi: mem15: type=2, attr=0xf, range=[0x00000000bad99000-0x00000000baf6d000) (1MB)
efi: mem16: type=1, attr=0xf, range=[0x00000000baf6d000-0x00000000bb0a1000) (1MB)
efi: mem17: type=10, attr=0xf, range=[0x00000000bb0a1000-0x00000000bb0a8000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000bb0a8000-0x00000000bb1fd000) (1MB)
efi: mem19: type=3, attr=0xf, range=[0x00000000bb1fd000-0x00000000bb807000) (6MB)
efi: mem20: type=4, attr=0xf, range=[0x00000000bb807000-0x00000000bb813000) (0MB)
efi: mem21: type=6, attr=0x800000000000000f, range=[0x00000000bb813000-0x00000000bba4e000) (2MB)
efi: mem22: type=4, attr=0xf, range=[0x00000000bba4e000-0x00000000bba5d000) (0MB)
efi: mem23: type=7, attr=0xf, range=[0x00000000bba5d000-0x00000000bba6a000) (0MB)
efi: mem24: type=2, attr=0xf, range=[0x00000000bba6a000-0x00000000bba6c000) (0MB)
efi: mem25: type=7, attr=0xf, range=[0x00000000bba6c000-0x00000000c00dd000) (70MB)
efi: mem26: type=4, attr=0xf, range=[0x00000000c00dd000-0x00000000c05c8000) (4MB)
efi: mem27: type=7, attr=0xf, range=[0x00000000c05c8000-0x00000000c073f000) (1MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000c073f000-0x00000000c07c5000) (0MB)
efi: mem29: type=7, attr=0xf, range=[0x00000000c07c5000-0x00000000c0806000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x00000000c0806000-0x00000000c081c000) (0MB)
efi: mem31: type=7, attr=0xf, range=[0x00000000c081c000-0x00000000c0824000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x00000000c0824000-0x00000000c082f000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x00000000c082f000-0x00000000c0834000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x00000000c0834000-0x00000000c083b000) (0MB)
efi: mem35: type=7, attr=0xf, range=[0x00000000c083b000-0x00000000c0842000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000c0842000-0x00000000c084f000) (0MB)
efi: mem37: type=7, attr=0xf, range=[0x00000000c084f000-0x00000000c0853000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000c0853000-0x00000000c085a000) (0MB)
efi: mem39: type=7, attr=0xf, range=[0x00000000c085a000-0x00000000c085b000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000c085b000-0x00000000c0c5c000) (4MB)
efi: mem41: type=7, attr=0xf, range=[0x00000000c0c5c000-0x00000000c0c60000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000c0c60000-0x00000000ca404000) (151MB)
efi: mem43: type=7, attr=0xf, range=[0x00000000ca404000-0x00000000ca406000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x00000000ca406000-0x00000000ca412000) (0MB)
efi: mem45: type=7, attr=0xf, range=[0x00000000ca412000-0x00000000ca417000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x00000000ca417000-0x00000000cb933000) (21MB)
efi: mem47: type=7, attr=0xf, range=[0x00000000cb933000-0x00000000cc1d6000) (8MB)
efi: mem48: type=3, attr=0xf, range=[0x00000000cc1d6000-0x00000000cc4ce000) (2MB)
efi: mem49: type=0, attr=0xf, range=[0x00000000cc4ce000-0x00000000cc57b000) (0MB)
efi: mem50: type=0, attr=0xf, range=[0x00000000cc57b000-0x00000000cc82c000) (2MB)
efi: mem51: type=7, attr=0xf, range=[0x00000000cc82c000-0x00000000cc85f000) (0MB)
efi: mem52: type=2, attr=0xf, range=[0x00000000cc85f000-0x00000000cc869000) (0MB)
efi: mem53: type=10, attr=0xf, range=[0x00000000cc869000-0x00000000cc8ff000) (0MB)
efi: mem54: type=10, attr=0xf, range=[0x00000000cc8ff000-0x00000000cc903000) (0MB)
efi: mem55: type=10, attr=0xf, range=[0x00000000cc903000-0x00000000cc90f000) (0MB)
efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000cc90f000-0x00000000ccea4000) (5MB)
efi: mem57: type=6, attr=0x800000000000000f, range=[0x00000000ccea4000-0x00000000ccee7000) (0MB)
efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000ccee7000-0x00000000ccee9000) (0MB)
efi: mem59: type=6, attr=0x800000000000000f, range=[0x00000000ccee9000-0x00000000ccf86000) (0MB)
efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000ccf86000-0x00000000ccf9e000) (0MB)
efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ccf9e000-0x00000000ccfff000) (0MB)
efi: mem62: type=4, attr=0xf, range=[0x00000000ccfff000-0x00000000cd000000) (0MB)
efi: mem63: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f600000) (4598MB)
efi: mem64: type=0, attr=0x0, range=[0x00000000cf800000-0x00000000dfa00000) (258MB)
efi: mem65: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem66: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem67: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem68: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem69: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem70: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H81M-HDS, BIOS P1.90 07/02/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00D0000000 mask 7FF0000000 uncachable
4 base 00CF800000 mask 7FFF800000 uncachable
5 base 021F800000 mask 7FFF800000 uncachable
6 base 021F600000 mask 7FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3328MB, range: 256MB, type UC
reg 4, base: 3320MB, range: 8MB, type UC
reg 5, base: 8696MB, range: 8MB, type UC
reg 6, base: 8694MB, range: 2MB, type UC
total RAM covered: 7918M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 512MB, type WB
reg 6, base: 8694MB, range: 2MB, type UC
reg 7, base: 8696MB, range: 8MB, type UC
e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd760-0x000fd76f] mapped at [ffff8800000fd760]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fbe000, 0x02fbefff] PGTABLE
BRK [0x02fbf000, 0x02fbffff] PGTABLE
BRK [0x02fc0000, 0x02fc0fff] PGTABLE
init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
[mem 0x21f400000-0x21f5fffff] page 2M
BRK [0x02fc1000, 0x02fc1fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
[mem 0x21c000000-0x21f3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbb0a0fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbaffffff] page 2M
[mem 0xbb000000-0xbb0a0fff] page 4k
init_memory_mapping: [mem 0xbb0a8000-0xbb812fff]
[mem 0xbb0a8000-0xbb1fffff] page 4k
[mem 0xbb200000-0xbb7fffff] page 2M
[mem 0xbb800000-0xbb812fff] page 4k
BRK [0x02fc2000, 0x02fc2fff] PGTABLE
init_memory_mapping: [mem 0xbba4e000-0xcc4cdfff]
[mem 0xbba4e000-0xbbbfffff] page 4k
[mem 0xbbc00000-0xcc3fffff] page 2M
[mem 0xcc400000-0xcc4cdfff] page 4k
BRK [0x02fc3000, 0x02fc3fff] PGTABLE
init_memory_mapping: [mem 0xcc82c000-0xcc868fff]
[mem 0xcc82c000-0xcc868fff] page 4k
init_memory_mapping: [mem 0xccfff000-0xccffffff]
[mem 0xccfff000-0xccffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
cma: CMA: reserved 64 MiB at 21b400000
RAMDISK: [mem 0x347bc000-0x363d5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CC8EB000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CC8EB080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000CC8F5B08 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CC8EB1A0 00A961 (v02 ALASKA A M I 00000190 INTL 20091112)
ACPI: FACS 0x00000000CC90D080 000040
ACPI: APIC 0x00000000CC8F5C18 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CC8F5C80 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000CC8F5CC8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CC8F6208 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CC8F6CE0 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117)
ACPI: MCFG 0x00000000CC8F6EA8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000CC8F6EE8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CC8F6F20 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CC8F7290 003493 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: AAFT 0x00000000CC8FA728 00020D (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: BGRT 0x00000000CC8FA938 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
NODE_DATA [mem 0x21f5f5000-0x21f5f9fff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880213000000-ffff88021abfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00057fff]
node 0: [mem 0x00059000-0x0009efff]
node 0: [mem 0x00100000-0xbb0a0fff]
node 0: [mem 0xbb0a8000-0xbb812fff]
node 0: [mem 0xbba4e000-0xcc4cdfff]
node 0: [mem 0xcc82c000-0xcc868fff]
node 0: [mem 0xccfff000-0xccffffff]
node 0: [mem 0x100000000-0x21f5fffff]
On node 0 totalpages: 2013287
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13004 pages used for memmap
DMA32 zone: 832202 pages, LIFO batch:31
Normal zone: 18392 pages used for memmap
Normal zone: 1177088 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xcfa00000-0xdf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbb0a1000-0xbb0a7fff]
PM: Registered nosave memory: [mem 0xbb813000-0xbba4dfff]
PM: Registered nosave memory: [mem 0xcc4ce000-0xcc82bfff]
PM: Registered nosave memory: [mem 0xcc869000-0xcc90efff]
PM: Registered nosave memory: [mem 0xcc90f000-0xccf85fff]
PM: Registered nosave memory: [mem 0xccf86000-0xccffefff]
PM: Registered nosave memory: [mem 0xcd000000-0xcf7fffff]
PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88021b200000 s86336 r8192 d24256 u1048576
pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1981802
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-031600-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7551480K/8053148K available (7780K kernel code, 1118K rwdata, 3704K rodata, 1368K init, 1304K bss, 501668K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:512 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 32505856 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2999.307 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.61 BogoMIPS (lpj=11997228)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff82e6f000 - ffffffff82e76000)
ftrace: allocating 31956 entries in 125 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (11997.22 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbb0a1000-0xbb0a7fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xcc869000-0xcc90efff] (679936 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 23:24:54, date: 08/15/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802102B6C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880210301000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88021030CC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf0614000-0xf0617fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf061e000-0xf061e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf061c000-0xf061c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf061b000-0xf061b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf061a000-0xf061a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf0619000-0xf06190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0504000-0xf0504fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0500000-0xf0503fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0407fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbb0a1000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb813000-0xbbffffff]
e820: reserve RAM buffer [mem 0xcc4ce000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcc869000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfbfffff]
pci_bus 0000:01: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28776K (ffff8800347bc000 - ffff8800363d6000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbc0dd000-0xc00dd000] (64MB) mapped at [ffff8800bc0dd000-ffff8800c00dcfff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1408145094.544:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 15319
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf061c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-031600-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf061b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-031600-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-031600-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-031600-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-031600-generic xhci_hcd
usb usb5: SerialNumber: 0000:03:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-031600-generic xhci_hcd
usb usb6: SerialNumber: 0000:03:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 221aac025e17c8e76d8197a53aa765a4617ae7dc'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 10:953:453
rtc_cmos 00:02: setting system clock to 2014-08-15 23:24:55 UTC (1408145095)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1368K (ffffffff82d19000 - ffffffff82e6f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 400K (ffff88000279c000 - ffff880002800000)
Freeing unused kernel memory: 392K (ffff880002b9e000 - ffff880002c00000)
systemd-udevd[101]: starting version 204
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 45 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000c70000, bc:5f:f4:d6:8e:16, XID 0c000800 IRQ 45
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf061a000 port 0xf061a100 irq 44
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 46 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: KINGSTON SKC300S37A60G, 507KC4, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC300S C4 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:5c: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 3-1: new low-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2999.129 MHz
usb 3-1: New USB device found, idVendor=045e, idProduct=076c
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Microsoft\xffffffc2\xffffffae\xffffffae Comfort Mouse 4500
usb 3-1: Manufacturer: Microsoft
usb 3-1: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Comfort Mouse 4500 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:045E:076C.0001/input/input6
microsoft 0003:045E:076C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Comfort Mouse 4500] on usb-0000:00:14.0-1/input0
usb 3-10: new full-speed USB device number 3 using xhci_hcd
usb 3-10: New USB device found, idVendor=046d, idProduct=c52b
usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10: Product: USB Receiver
usb 3-10: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10/input2
input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.2/0003:046D:C52B.0004/0003:046D:C52B.0005/input/input7
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:14.0-10:1
Switched to clocksource tsc
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
random: nonblocking pool is initialized
EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
EXT4-fs (dm-1): write access will be enabled during recovery
EXT4-fs (dm-1): orphan cleanup on readonly fs
EXT4-fs (dm-1): 1 orphan inode deleted
EXT4-fs (dm-1): recovery complete
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (368) terminated with status 5
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
systemd-udevd[502]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (634) killed by HUP signal
init: cups main process ended, respawning
device-mapper: multipath: version 1.7.0 loaded
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Front Mic=0x19
sound hdaudioC1D0: Rear Mic=0x18
sound hdaudioC1D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
init: failsafe main process (820) killed by TERM signal
init: samba-ad-dc main process (1102) terminated with status 1
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1601) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1665) terminated with status 1
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] stuck on render ring
[drm] GPU HANG: ecode 0:0x87d3bffa, in chromium-browse [3031], reason: Ring hung, action: reset
[drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[drm] GPU crash dump saved to /sys/class/drm/card0/error
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[drm] stuck on render ring
[drm] GPU HANG: ecode 0:0x87d3bffa, in cinnamon [2831], reason: Ring hung, action: reset
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:07: disabled
serial 00:07: System wakeup disabled by ACPI
parport_pc 00:05: disabled
PM: suspend of devices complete after 313.061 msecs
PM: late suspend of devices complete after 15.941 msecs
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.045 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
Broke affinity for irq 40
Broke affinity for irq 44
Broke affinity for irq 45
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 15.818 msecs
PM: early resume of devices complete after 0.133 msecs
snd_hda_intel 0000:00:03.0: irq 47 for MSI/MSI-X
mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
parport_pc 00:05: activated
serial 00:07: activated
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
usb usb5: root hub lost power or was reset
usb usb6: root hub lost power or was reset
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
r8169 0000:02:00.0 eth0: link down
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
PM: resume of devices complete after 422.476 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
r8169 0000:02:00.0 eth0: link up
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
perf interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000