dmesg - cdh
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d4d1dfff] usable
BIOS-e820: [mem 0x00000000d4d1e000-0x00000000d5155fff] reserved
BIOS-e820: [mem 0x00000000d5156000-0x00000000d5165fff] ACPI data
BIOS-e820: [mem 0x00000000d5166000-0x00000000d56cefff] ACPI NVS
BIOS-e820: [mem 0x00000000d56cf000-0x00000000d6564fff] reserved
BIOS-e820: [mem 0x00000000d6565000-0x00000000d6565fff] usable
BIOS-e820: [mem 0x00000000d6566000-0x00000000d676bfff] ACPI NVS
BIOS-e820: [mem 0x00000000d676c000-0x00000000d6ba5fff] usable
BIOS-e820: [mem 0x00000000d6ba6000-0x00000000d6ff3fff] reserved
BIOS-e820: [mem 0x00000000d6ff4000-0x00000000d6ffffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000426ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/A88X-PRO, BIOS 1301 06/24/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x427000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000D0000000 mask FFFFFC000000 write-back
4 base 0000D4000000 mask FFFFFE000000 write-back
5 base 0000D6000000 mask FFFFFF000000 write-back
6 disabled
7 disabled
TOM2: 0000000427000000 aka 17008M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd7000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xd7000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd860-0x000fd86f] mapped at [ffff8800000fd860]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x426e00000-0x426ffffff]
[mem 0x426e00000-0x426ffffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x424000000-0x426dfffff]
[mem 0x424000000-0x426dfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x423ffffff]
[mem 0x400000000-0x423ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xd4d1dfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xd4bfffff] page 2M
[mem 0xd4c00000-0xd4d1dfff] page 4k
init_memory_mapping: [mem 0xd6565000-0xd6565fff]
[mem 0xd6565000-0xd6565fff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xd676c000-0xd6ba5fff]
[mem 0xd676c000-0xd67fffff] page 4k
[mem 0xd6800000-0xd69fffff] page 2M
[mem 0xd6a00000-0xd6ba5fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xd6ff4000-0xd6ffffff]
[mem 0xd6ff4000-0xd6ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35ba0000-0x36dc7fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000d515d078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000d51639e8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000d515d180 006862 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000d56c4080 000040
ACPI: APIC 00000000d5163af8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000d5163b70 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000d5163bb8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: CRAT 00000000d5164d18 000578 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: HPET 00000000d5163c50 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: BGRT 00000000d5163c88 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000d5163cc0 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 00000000d5164860 0004B7 (v02 AMD BANTRY 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000426ffffff]
Initmem setup node 0 [mem 0x00000000-0x426ffffff]
NODE_DATA [mem 0x426ff7000-0x426ffbfff]
[ffffea0000000000-ffffea00109fffff] PMD -> [ffff880416600000-ffff8804265fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x426ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xd4d1dfff]
node 0: [mem 0xd6565000-0xd6565fff]
node 0: [mem 0xd676c000-0xd6ba5fff]
node 0: [mem 0xd6ff4000-0xd6ffffff]
node 0: [mem 0x100000000-0x426ffffff]
On node 0 totalpages: 4178178
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13574 pages used for memmap
DMA32 zone: 868709 pages, LIFO batch:31
Normal zone: 51648 pages used for memmap
Normal zone: 3305472 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xd4d1e000-0xd5155fff]
PM: Registered nosave memory: [mem 0xd5156000-0xd5165fff]
PM: Registered nosave memory: [mem 0xd5166000-0xd56cefff]
PM: Registered nosave memory: [mem 0xd56cf000-0xd6564fff]
PM: Registered nosave memory: [mem 0xd6566000-0xd676bfff]
PM: Registered nosave memory: [mem 0xd6ba6000-0xd6ff3fff]
PM: Registered nosave memory: [mem 0xd7000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xd7000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880426c00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4112871
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ cc000000
PM: Registered nosave memory: [mem 0xcc000000-0xcfffffff]
Memory: 16283280K/16712712K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 429432K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3700.248 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7400.49 BogoMIPS (lpj=14800992)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00d7000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-6700 APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (29601.98 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xd5166000-0xd56cefff] (5672960 bytes)
PM: Registering ACPI NVS region [mem 0xd6566000-0xd676bfff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 23:42:14, date: 08/15/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd8000000-0xf7ffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf7406000-0xf7407fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xf7404000-0xf7405fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xf740c000-0xf740c7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf740b000-0xf740bfff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf740a000-0xf740a0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf7409000-0xf7409fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf7408000-0xf74080ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf7400000-0xf7403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: PME# supported from D0 D3hot D3cold
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [10b5:8747] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xf7100000-0xf713ffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 01-04]
pci 0000:00:02.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf71fffff]
pci 0000:00:02.0: bridge window [mem 0xd8000000-0xf1ffffff 64bit pref]
pci 0000:02:08.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:10.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:01:00.0: bridge window [mem 0xf4000000-0xf70fffff]
pci 0000:01:00.0: bridge window [mem 0xd8000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: [10de:1188] type 00 class 0x030200
pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:03:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xf7000000-0xf7003fff]
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:08.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:02:08.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: [10de:1188] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xc000-0xc07f]
pci 0000:04:00.0: reg 0x30: [mem 0xf5000000-0xf507ffff pref]
pci 0000:04:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xf5080000-0xf5083fff]
pci 0000:02:10.0: PCI bridge to [bus 04]
pci 0000:02:10.0: bridge window [io 0xc000-0xcfff]
pci 0000:02:10.0: bridge window [mem 0xf4000000-0xf50fffff]
pci 0000:02:10.0: bridge window [mem 0xd8000000-0xe1ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd8000000-0xf7ffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xf7300000-0xf7307fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 07]
pci 0000:00:15.1: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:08:00.0: reg 0x18: [mem 0xf7200000-0xf7200fff 64bit]
pci 0000:08:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:15.2: PCI bridge to [bus 08]
pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
pci 0000:00:15.2: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:15.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xd4d1e000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd6566000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd6ba6000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
e820: reserve RAM buffer [mem 0x427000000-0x427ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x040b] has been reserved
system 00:0a: [io 0x04d6] has been reserved
system 00:0a: [io 0x0c00-0x0c01] has been reserved
system 00:0a: [io 0x0c14] has been reserved
system 00:0a: [io 0x0c50-0x0c51] has been reserved
system 00:0a: [io 0x0c52] has been reserved
system 00:0a: [io 0x0c6c] has been reserved
system 00:0a: [io 0x0c6f] has been reserved
system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
system 00:0a: [io 0x0800-0x089f] could not be reserved
system 00:0a: [io 0x0b20-0x0b3f] has been reserved
system 00:0a: [io 0x0900-0x090f] has been reserved
system 00:0a: [io 0x0910-0x091f] has been reserved
system 00:0a: [io 0xfe00-0xfefe] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:08.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:02:08.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:02:10.0: PCI bridge to [bus 04]
pci 0000:02:10.0: bridge window [io 0xc000-0xcfff]
pci 0000:02:10.0: bridge window [mem 0xf4000000-0xf50fffff]
pci 0000:02:10.0: bridge window [mem 0xd8000000-0xe1ffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:01:00.0: bridge window [mem 0xf4000000-0xf70fffff]
pci 0000:01:00.0: bridge window [mem 0xd8000000-0xf1ffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 01-04]
pci 0000:00:02.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf71fffff]
pci 0000:00:02.0: bridge window [mem 0xd8000000-0xf1ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.1: PCI bridge to [bus 07]
pci 0000:00:15.1: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:15.2: PCI bridge to [bus 08]
pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
pci 0000:00:15.2: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:15.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd8000000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf71fffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf70fffff]
pci_bus 0000:02: resource 2 [mem 0xd8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:03: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf50fffff]
pci_bus 0000:04: resource 2 [mem 0xd8000000-0xe1ffffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x03af]
pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:05: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:05: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 10 [mem 0xd8000000-0xf7ffffff]
pci_bus 0000:07: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:08: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18592K (ffff880035ba0000 - ffff880036dc8000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd0d1e000-0xd4d1e000] (64MB) mapped at [ffff8800d0d1e000-ffff8800d4d1dfff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1408146134.568:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31839
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:01:00.0: irq 40 for MSI/MSI-X
pcieport 0000:02:08.0: irq 41 for MSI/MSI-X
pcieport 0000:02:10.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 3840x2160x16, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90005b80000, using 16256k, total 16256k
Console: switching to colour frame buffer device 480x135
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf740a000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf7408000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xf740b000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xf7409000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 47 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb5: SerialNumber: 0000:00:10.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 52 for MSI/MSI-X
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb8: SerialNumber: 0000:00:10.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 56 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 57 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb9: SerialNumber: 0000:07:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb10: SerialNumber: 0000:07:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:265:757
tty ttyS8: hash matches
rtc_cmos 00:05: setting system clock to 2014-08-15 23:42:15 UTC (1408146135)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[116]: starting version 204
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 58 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf740c000 port 0xf740c100 irq 58
ata2: SATA max UDMA/133 abar m2048@0xf740c000 port 0xf740c180 irq 58
ata3: SATA max UDMA/133 abar m2048@0xf740c000 port 0xf740c200 irq 58
ata4: SATA max UDMA/133 abar m2048@0xf740c000 port 0xf740c280 irq 58
ata5: SATA max UDMA/133 abar m2048@0xf740c000 port 0xf740c300 irq 58
ata6: SATA max UDMA/133 abar m2048@0xf740c000 port 0xf740c380 irq 58
ata7: SATA max UDMA/133 abar m2048@0xf740c000 port 0xf740c400 irq 58
ata8: SATA max UDMA/133 abar m2048@0xf740c000 port 0xf740c480 irq 58
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0: irq 59 for MSI/MSI-X
r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90005b4a000, d8:50:e6:48:99:00, XID 0c000800 IRQ 59
r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
usb 3-1: new full-speed USB device number 2 using ohci-pci
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: configured for UDMA/133
ata1.00: ATA-9: INTEL SSDSC2CW180A3, 400i, max UDMA/133
ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Crucial_CT960M500SSD1, MU05, max UDMA/133
ata2.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW18 400i PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Crucial_CT960M50 MU05 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg2 type 0
sdb: sdb1
sdc: sdc1 sdc2 < sdc5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 3700.211 MHz
random: init urandom read with 46 bits of entropy available
init: plymouth-upstart-bridge main process (189) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (199) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Receiver
usb 3-1: Manufacturer: Logitech
init: plymouth-upstart-bridge main process (207) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 16713724k swap on /dev/sdc5. Priority:-1 extents:1 across:16713724k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[309]: starting version 204
wmi: Mapper loaded
lp: driver loaded but no devices found
[drm] Initialized drm 1.1.0 20060810
ppdev: user-space parallel port driver
checking generic (e1000000 fe0000) vs hw (e8000000 8000000)
checking generic (e1000000 fe0000) vs hw (f0000000 2000000)
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:03:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:03:00.0] Family : NVE0
nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:03:00.0] ... signature not found
nouveau [ VBIOS][0000:03:00.0] checking PROM for image...
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
hda_codec: ALC1150: SKU not ready 0x00000000
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
random: nonblocking pool is initialized
nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
nouveau [ VBIOS][0000:03:00.0] using image from PROM
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 80.04.1e.00.0e
nouveau [ DEVINIT][0000:03:00.0] adaptor not initialised
nouveau [ VBIOS][0000:03:00.0] running init tables
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Switched to clocksource tsc
nouveau 0000:03:00.0: irq 60 for MSI/MSI-X
nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
nouveau [ PFB][0000:03:00.0] RAM type: GDDR5
nouveau [ PFB][0000:03:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:03:00.0] GPU voltage: 987500uv
systemd-udevd[341]: renamed network interface eth0 to eth11
nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
nouveau [ PTHERM][0000:03:00.0] fan management: automatic
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
nouveau [ CLK][0000:03:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:03:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:03:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:03:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:03:00.0] --: core 324 MHz memory 324 MHz
[TTM] Zone kernel: Available graphics memory: 8152394 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB outp 02: 08011f82 00020030
nouveau [ DRM] DCB outp 03: 04832fb6 0f420010
nouveau [ DRM] DCB outp 04: 04032f72 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 01000131
nouveau [ DRM] DCB conn 02: 00020246
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
[drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
checking generic (e1000000 fe0000) vs hw (d8000000 8000000)
checking generic (e1000000 fe0000) vs hw (e0000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
hda_intel: Disabling MSI
hda-intel 0000:03:00.1: Disabling 64bit DMA
Console: switching to colour dummy device 80x25
hda-intel 0000:03:00.1: Enable delay in RIRB handling
nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:04:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:04:00.0] Family : NVE0
nouveau [ VBIOS][0000:04:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:04:00.0] ... signature not found
nouveau [ VBIOS][0000:04:00.0] checking PROM for image...
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
asus_wmi: Disabling ACPI video driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input2
nouveau [ VBIOS][0000:04:00.0] ... appears to be valid
nouveau [ VBIOS][0000:04:00.0] using image from PROM
nouveau [ VBIOS][0000:04:00.0] BIT signature found
nouveau [ VBIOS][0000:04:00.0] version 80.04.1e.00.0f
input: Logitech Unifying Device. Wireless PID:2007 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/input/input13
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2007] on usb-0000:00:12.0-1:1
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/input/input14
nouveau 0000:04:00.0: irq 61 for MSI/MSI-X
nouveau [ PMC][0000:04:00.0] MSI interrupts enabled
nouveau [ PFB][0000:04:00.0] RAM type: GDDR5
nouveau [ PFB][0000:04:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:12.0-1:2
nouveau [ VOLT][0000:04:00.0] GPU voltage: 987500uv
nouveau [ PTHERM][0000:04:00.0] FAN control: none / external
nouveau [ PTHERM][0000:04:00.0] fan management: automatic
nouveau [ PTHERM][0000:04:00.0] internal sensor: yes
nouveau [ CLK][0000:04:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:04:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:04:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:04:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:04:00.0] --: core 324 MHz memory 324 MHz
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB conn 00: 00001030
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
type=1400 audit(1408146137.603:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=574 comm="apparmor_parser"
type=1400 audit(1408146137.603:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=574 comm="apparmor_parser"
type=1400 audit(1408146137.603:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=574 comm="apparmor_parser"
type=1400 audit(1408146137.603:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=574 comm="apparmor_parser"
type=1400 audit(1408146137.603:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=574 comm="apparmor_parser"
type=1400 audit(1408146137.603:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=574 comm="apparmor_parser"
type=1400 audit(1408146137.607:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=583 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1408146137.671:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=608 comm="apparmor_parser"
type=1400 audit(1408146137.671:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=608 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
nouveau [ DRM] allocated 3840x2160 fb: 0x80000, bo ffff88040d08f800
fbcon: nouveaufb (fb0) is primary device
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input15
Console: switching to colour frame buffer device 480x135
nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:04:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:04:00.0 on minor 1
hda_intel: Disabling MSI
hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:04:00.1: Disabling 64bit DMA
hda-intel 0000:04:00.1: Enable delay in RIRB handling
init: failsafe main process (619) killed by TERM signal
r8169 0000:08:00.0 eth11: link down
r8169 0000:08:00.0 eth11: link down
IPv6: ADDRCONF(NETDEV_UP): eth11: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth11: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:10.0/0000:04:00.1/sound/card2/input18
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1120) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:08:00.0 eth11: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth11: link becomes ready
pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xe0 [nouveau] returns -22
show_signal_msg: 108 callbacks suppressed
conftest[12122]: segfault at 0 ip 00000000004005c0 sp 00007fffec1f0c60 error 4 in conftest[400000+1000]
conftest[12151]: segfault at 0 ip 00007fbe2a408b7a sp 00007fffce9df908 error 4 in libc-2.19.so[7fbe2a370000+1bc000]