dmesg - cdh
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ba624fff] usable
BIOS-e820: [mem 0x00000000ba625000-0x00000000baa58fff] reserved
BIOS-e820: [mem 0x00000000baa59000-0x00000000baa68fff] ACPI data
BIOS-e820: [mem 0x00000000baa69000-0x00000000bb86efff] ACPI NVS
BIOS-e820: [mem 0x00000000bb86f000-0x00000000bca33fff] reserved
BIOS-e820: [mem 0x00000000bca34000-0x00000000bca34fff] usable
BIOS-e820: [mem 0x00000000bca35000-0x00000000bcc3afff] ACPI NVS
BIOS-e820: [mem 0x00000000bcc3b000-0x00000000bd081fff] usable
BIOS-e820: [mem 0x00000000bd082000-0x00000000bd7f2fff] reserved
BIOS-e820: [mem 0x00000000bd7f3000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2101 04/17/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BD800000 mask FFFFFF800000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000440000000 aka 17408M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3032MB, range: 8MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
total RAM covered: 3032M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3032MB, range: 8MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[mem 0x43fe00000-0x43fffffff] page 1G
init_memory_mapping: [mem 0x43c000000-0x43fdfffff]
[mem 0x43c000000-0x43fdfffff] page 1G
init_memory_mapping: [mem 0x400000000-0x43bffffff]
[mem 0x400000000-0x43bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xba624fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xba5fffff] page 2M
[mem 0xba600000-0xba624fff] page 4k
init_memory_mapping: [mem 0xbca34000-0xbca34fff]
[mem 0xbca34000-0xbca34fff] page 4k
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0xbcc3b000-0xbd081fff]
[mem 0xbcc3b000-0xbcdfffff] page 4k
[mem 0xbce00000-0xbcffffff] page 2M
[mem 0xbd000000-0xbd081fff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xbd7f3000-0xbd7fffff]
[mem 0xbd7f3000-0xbd7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x3ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35ba0000-0x36dc7fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000baa61070 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000baa68278 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000baa61158 007119 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bb869f80 000040
ACPI: APIC 00000000baa68388 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000baa68408 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000baa68450 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000baa68490 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 00000000baa68520 0008BC (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x00000000-0x43fffffff]
NODE_DATA [mem 0x43fff6000-0x43fffafff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xba624fff]
node 0: [mem 0xbca34000-0xbca34fff]
node 0: [mem 0xbcc3b000-0xbd081fff]
node 0: [mem 0xbd7f3000-0xbd7fffff]
node 0: [mem 0x100001000-0x43fffffff]
On node 0 totalpages: 4172310
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11882 pages used for memmap
DMA32 zone: 760442 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407871 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xba625000-0xbaa58fff]
PM: Registered nosave memory: [mem 0xbaa59000-0xbaa68fff]
PM: Registered nosave memory: [mem 0xbaa69000-0xbb86efff]
PM: Registered nosave memory: [mem 0xbb86f000-0xbca33fff]
PM: Registered nosave memory: [mem 0xbca35000-0xbcc3afff]
PM: Registered nosave memory: [mem 0xbd082000-0xbd7f2fff]
PM: Registered nosave memory: [mem 0xbd800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbd800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88043fc00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4107095
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b0000000
PM: Registered nosave memory: [mem 0xb0000000-0xb3ffffff]
Memory: 16259804K/16689240K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 429436K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3511.719 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7023.43 BogoMIPS (lpj=14046876)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bd800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 970 Processor (fam: 10, model: 04, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU1
process: Switch to broadcast mode on CPU2
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (28093.75 BogoMIPS)
process: Switch to broadcast mode on CPU3
process: Switch to broadcast mode on CPU0
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbaa69000-0xbb86efff] (14704640 bytes)
PM: Registering ACPI NVS region [mem 0xbca35000-0xbcc3afff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 21:01:26, date: 08/13/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [c000, ffff]
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff]
TOM2: 0000000440000000 aka 17408M
bus: [bus 00-1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xc0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x440000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe60b000-0xfe60b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe60a000-0xfe60afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe609000-0xfe6090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe608000-0xfe608fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe607000-0xfe6070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe606000-0xfe606fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe605000-0xfe605fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe604000-0xfe6040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10b5:8747] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xfe100000-0xfe13ffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 01-04]
pci 0000:00:02.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfe1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
pci 0000:02:08.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:10.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:01:00.0: bridge window [mem 0xfb000000-0xfe0fffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
pci 0000:03:00.0: [10de:1188] type 00 class 0x030200
pci 0000:03:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:03:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfe000000-0xfe003fff]
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:08.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:02:08.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:04:00.0: [10de:1188] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xc0000000-0xc7ffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xc000-0xc07f]
pci 0000:04:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
pci 0000:04:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
pci 0000:02:10.0: PCI bridge to [bus 04]
pci 0000:02:10.0: bridge window [io 0xc000-0xcfff]
pci 0000:02:10.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:02:10.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:05:00.0: [8086:150c] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe51ffff]
pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xfe520000-0xfe523fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 05]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfe400000-0xfe407fff 64bit]
pci 0000:06:00.0: PME# supported from D3cold
pci 0000:00:06.0: PCI bridge to [bus 06]
pci 0000:00:06.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:07:00.0: PME# supported from D3cold
pci 0000:00:07.0: PCI bridge to [bus 07]
pci 0000:00:07.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:08:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
pci 0000:08:00.0: PME# supported from D3cold
pci 0000:00:09.0: PCI bridge to [bus 08]
pci 0000:00:09.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:0b.0: PCI bridge to [bus 09]
pci 0000:00:0d.0: PCI bridge to [bus 0a]
pci 0000:00:14.4: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xba625000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbca35000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd082000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:08.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:02:08.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:02:10.0: PCI bridge to [bus 04]
pci 0000:02:10.0: bridge window [io 0xc000-0xcfff]
pci 0000:02:10.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:02:10.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:01:00.0: bridge window [mem 0xfb000000-0xfe0fffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 01-04]
pci 0000:00:02.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfe1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 05]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:06.0: PCI bridge to [bus 06]
pci 0000:00:06.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:07.0: PCI bridge to [bus 07]
pci 0000:00:07.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:09.0: PCI bridge to [bus 08]
pci 0000:00:09.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:0b.0: PCI bridge to [bus 09]
pci 0000:00:0d.0: PCI bridge to [bus 0a]
pci 0000:00:14.4: PCI bridge to [bus 0b]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfe1fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfe0fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd9ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc9ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:07: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:08: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:0b: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0b: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0b: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0b: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0b: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0b: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18592K (ffff880035ba0000 - ffff880036dc8000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b0000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1407963686.740:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31922
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:01:00.0: irq 72 for MSI/MSI-X
pcieport 0000:02:08.0: irq 73 for MSI/MSI-X
pcieport 0000:02:10.0: irq 74 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 3840x2160x16, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xc9000000, mapped to 0xffffc90011b80000, using 16256k, total 16256k
Console: switching to colour frame buffer device 480x135
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe609000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfe607000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfe604000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe60a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 20, io mem 0xfe608000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe606000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 22, io mem 0xfe605000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:06:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 79 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb8: SerialNumber: 0000:06:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb9: SerialNumber: 0000:06:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:07:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 84 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb10: SerialNumber: 0000:07:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb11: SerialNumber: 0000:07:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 12
xhci_hcd 0000:08:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 87 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 88 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 89 for MSI/MSI-X
usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: xHCI Host Controller
usb usb12: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb12: SerialNumber: 0000:08:00.0
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 13
usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: Product: xHCI Host Controller
usb usb13: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb13: SerialNumber: 0000:08:00.0
hub 13-0:1.0: USB hub found
hub 13-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:179:45
rtc_cmos 00:04: setting system clock to 2014-08-13 21:01:28 UTC (1407963688)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[114]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b200 irq 19
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:05:00.0: irq 90 for MSI/MSI-X
e1000e 0000:05:00.0 eth0: registered PHC clock
e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) ac:22:0b:52:13:5b
e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0 eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
usb 4-2: new full-speed USB device number 2 using ohci-pci
tsc: Refined TSC clocksource calibration: 3511.735 MHz
usb 4-2: New USB device found, idVendor=046d, idProduct=c52b
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Receiver
usb 4-2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input2
input: Logitech Unifying Device. Wireless PID:2007 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input4
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2007] on usb-0000:00:12.0-2:1
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input5
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:12.0-2:2
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: supports DRM functions and may not be fully accessible
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
ata3.00: disabling queued TRIM support
ata3.00: ATA-9: Crucial_CT960M500SSD1, MU05, max UDMA/133
ata3.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-9: INTEL SSDSC2CW180A3, 400i, max UDMA/133
ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: disabling queued TRIM support
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW18 400i PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
scsi 2:0:0:0: Direct-Access ATA Crucial_CT960M50 MU05 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sdb: sdb1 sdb2 < sdb5 >
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 1:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 48 bits of entropy available
init: plymouth-upstart-bridge main process (178) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (187) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (191) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 16713724k swap on /dev/sdb5. Priority:-1 extents:1 across:16713724k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[299]: starting version 204
lp: driver loaded but no devices found
wmi: Mapper loaded
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90011b5eb00). heartbeat=60 sec (nowayout=0)
MXM: GUID detected in BIOS
checking generic (c9000000 fe0000) vs hw (d0000000 8000000)
checking generic (c9000000 fe0000) vs hw (d8000000 2000000)
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:03:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:03:00.0] Family : NVE0
nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:03:00.0] ... signature not found
nouveau [ VBIOS][0000:03:00.0] checking PROM for image...
systemd-udevd[332]: renamed network interface eth0 to eth10
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
type=1400 audit(1407963689.742:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=413 comm="apparmor_parser"
type=1400 audit(1407963689.742:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=413 comm="apparmor_parser"
type=1400 audit(1407963689.742:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
type=1400 audit(1407963689.746:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=413 comm="apparmor_parser"
type=1400 audit(1407963689.746:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
type=1400 audit(1407963689.746:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
random: nonblocking pool is initialized
type=1400 audit(1407963689.758:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=415 comm="apparmor_parser"
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4007e629
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000e6
SKU: external_amp=0x5
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4007e629 for NID 0x1d
realtek: Enabling init ASM_ID=0xe629 CODEC_ID=10ec0899
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
nouveau [ VBIOS][0000:03:00.0] using image from PROM
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 80.04.1e.00.0e
Switched to clocksource tsc
nouveau [ DEVINIT][0000:03:00.0] adaptor not initialised
nouveau [ VBIOS][0000:03:00.0] running init tables
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
type=1400 audit(1407963690.077:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=557 comm="apparmor_parser"
type=1400 audit(1407963690.077:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=557 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nouveau 0000:03:00.0: irq 91 for MSI/MSI-X
nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
nouveau [ PFB][0000:03:00.0] RAM type: GDDR5
nouveau [ PFB][0000:03:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:03:00.0] GPU voltage: 987500uv
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
asus_wmi: Disabling ACPI video driver
nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
nouveau [ PTHERM][0000:03:00.0] fan management: automatic
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
nouveau [ CLK][0000:03:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:03:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:03:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:03:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:03:00.0] --: core 324 MHz memory 324 MHz
[TTM] Zone kernel: Available graphics memory: 8173632 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB outp 02: 08011f82 00020030
nouveau [ DRM] DCB outp 03: 04832fb6 0f420010
nouveau [ DRM] DCB outp 04: 04032f72 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 01000131
nouveau [ DRM] DCB conn 02: 00020246
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
[drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
hda_intel: Disabling MSI
hda-intel 0000:03:00.1: Disabling 64bit DMA
checking generic (c9000000 fe0000) vs hw (c0000000 8000000)
checking generic (c9000000 fe0000) vs hw (c8000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:04:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:04:00.0] Family : NVE0
nouveau [ VBIOS][0000:04:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:04:00.0] ... signature not found
nouveau [ VBIOS][0000:04:00.0] checking PROM for image...
hda-intel 0000:03:00.1: Enable delay in RIRB handling
nouveau [ VBIOS][0000:04:00.0] ... appears to be valid
nouveau [ VBIOS][0000:04:00.0] using image from PROM
nouveau [ VBIOS][0000:04:00.0] BIT signature found
nouveau [ VBIOS][0000:04:00.0] version 80.04.1e.00.0f
nouveau 0000:04:00.0: irq 92 for MSI/MSI-X
nouveau [ PMC][0000:04:00.0] MSI interrupts enabled
nouveau [ PFB][0000:04:00.0] RAM type: GDDR5
nouveau [ PFB][0000:04:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:04:00.0] GPU voltage: 987500uv
nouveau [ PTHERM][0000:04:00.0] FAN control: none / external
nouveau [ PTHERM][0000:04:00.0] fan management: automatic
nouveau [ PTHERM][0000:04:00.0] internal sensor: yes
nouveau [ CLK][0000:04:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:04:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:04:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:04:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:04:00.0] --: core 324 MHz memory 324 MHz
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB conn 00: 00001030
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
init: failsafe main process (608) killed by TERM signal
nouveau [ DRM] allocated 3840x2160 fb: 0x80000, bo ffff88042863cc00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 480x135
nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:04:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:04:00.0 on minor 1
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input16
hda_intel: Disabling MSI
hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:04:00.1: Disabling 64bit DMA
hda-intel 0000:04:00.1: Enable delay in RIRB handling
e1000e 0000:05:00.0: irq 90 for MSI/MSI-X
e1000e 0000:05:00.0: irq 90 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:10.0/0000:04:00.1/sound/card2/input19
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1120) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
e1000e: eth10 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth10: link becomes ready
pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xe0 [nouveau] returns -22
audit_printk_skb: 108 callbacks suppressed
type=1400 audit(1407956919.441:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=27786 comm="apparmor_parser"
type=1400 audit(1407956919.441:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=27786 comm="apparmor_parser"
type=1400 audit(1407956919.441:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=27786 comm="apparmor_parser"
conftest[12266]: segfault at 0 ip 00000000004005c0 sp 00007fff109ac6b0 error 4 in conftest[400000+1000]
conftest[12295]: segfault at 0 ip 00007f972b025f06 sp 00007fffab5c3878 error 4 in libc-2.19.so[7f972af9e000+1bc000]