dmesg - z420-2-scimark2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.23.3.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Tue Jul 29 11:12:56 CDT 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bb418000 (usable)
BIOS-e820: 00000000bb418000 - 00000000bb82a000 (reserved)
BIOS-e820: 00000000bb82a000 - 00000000bb9da000 (ACPI NVS)
BIOS-e820: 00000000bb9da000 - 00000000bbaef000 (reserved)
BIOS-e820: 00000000bbaef000 - 00000000bc000000 (ACPI NVS)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF9C00
DMI: Hewlett-Packard HP Z420 Workstation/1589, BIOS J61 v03.18 07/01/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000BC000000 mask 3FFFFC000000 uncachable
1 base 0000C0000000 mask 3FFFC0000000 uncachable
2 base 000440000000 mask 3FFFC0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbb418 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bb418000
0000000000 - 0080000000 page 1G
0080000000 - 00bb400000 page 2M
00bb400000 - 00bb418000 page 4k
kernel direct mapping tables up to bb418000 @ 8000-b000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000440000000
0100000000 - 0440000000 page 1G
kernel direct mapping tables up to 440000000 @ a000-b000
RAMDISK: 36fa6000 - 37fef940
ACPI: RSDP 00000000000f9810 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bb74c080 00084 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: FACP 00000000bb753588 0010C (v05 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
ACPI: DSDT 00000000bb74c198 073EB (v02 HPQOEM SLIC-WKS 00000318 INTL 20051117)
ACPI: FACS 00000000bb9d1080 00040
ACPI: APIC 00000000bb753698 00090 (v03 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: FPDT 00000000bb753728 00044 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: ASF! 00000000bb753770 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: MCFG 00000000bb753818 0003C (v01 HPQOEM OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 00000000bb753858 00038 (v01 HPQOEM SLIC-WKS 01072009 AMI. 00000005)
ACPI: ASF! 00000000bb753890 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SSDT 00000000bb753930 05913 (v01 COMPAQ WMI 00000001 MSFT 03000001)
ACPI: SLIC 00000000bb759248 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: SSDT 00000000bb7593c0 02A71 (v02 HPQOEM CpuDef 00004000 INTL 20051117)
ACPI: SSDT 00000000bb75be38 CD380 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: IFEU 00000000bb8291b8 00042 (v01 HPQOEM SLIC-WKS 01072009 00000000)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000440000000
Bootmem setup node 0 0000000000000000-0000000440000000
NODE_DATA [000000000000a000 - 000000000003dfff]
bootmap [0000000000100000 - 0000000000187fff] pages 88
(7 early reservations) ==> bootmem [0000000000 - 0440000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [0036fa6000 - 0037fef940] RAMDISK ==> [0036fa6000 - 0037fef940]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [0002021000 - 0002021308] BRK ==> [0002021000 - 0002021308]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
found SMP MP-table at [ffff8800000f4bc0] f4bc0
Reserving 130MB of memory at 48MB for crashkernel (System RAM: 17408MB)
[ffffea0000000000-ffffea000edfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00440000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009e
0: 0x00000100 -> 0x000bb418
0: 0x00100000 -> 0x00440000
On node 0 totalpages: 4174773
DMA zone: 56 pages used for memmap
DMA zone: 102 pages reserved
DMA zone: 3839 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 748624 pages, LIFO batch:31
Normal zone: 46592 pages used for memmap
Normal zone: 3361280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bb418000 - 00000000bb82a000
PM: Registered nosave memory: 00000000bb82a000 - 00000000bb9da000
PM: Registered nosave memory: 00000000bb9da000 - 00000000bbaef000
PM: Registered nosave memory: 00000000bbaef000 - 00000000bc000000
PM: Registered nosave memory: 00000000bc000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bc000000 (gap: bc000000:34000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u524288
pcpu-alloc: s94872 r8192 d23912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4113743
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 16236340k/17825792k available (5330k kernel code, 1126700k absent, 462752k reserved, 7009k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:848
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
TSC: cpu family 6 model 45, tsc initial value = 1e011f72eea34
Fast TSC calibration using PIT
Detected 2992.651 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.30 BogoMIPS (lpj=2992651)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 16 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21786 entries in 86 pages
x2apic not enabled, IRQ remapping init failed
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-1607 0 @ 3.00GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (23941.20 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at bb82a000 (1769472 bytes)
PM: Registering ACPI NVS region at bbaef000 (5312512 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f7ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff]
pci_root PNP0A08:00: host bridge window [mem 0x3c0000000000-0x3c007fffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0x3c0000000000-0x3c007fffffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.4: reg 10: [mem 0xed129000-0xed129fff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xed128000-0xed12800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.2: reg 10: [io 0xe0b0-0xe0b7]
pci 0000:00:16.2: reg 14: [io 0xe0a0-0xe0a3]
pci 0000:00:16.2: reg 18: [io 0xe090-0xe097]
pci 0000:00:16.2: reg 1c: [io 0xe080-0xe083]
pci 0000:00:16.2: reg 20: [io 0xe070-0xe07f]
pci 0000:00:16.3: reg 10: [io 0xe060-0xe067]
pci 0000:00:16.3: reg 14: [mem 0xed127000-0xed127fff]
pci 0000:00:19.0: reg 10: [mem 0xed100000-0xed11ffff]
pci 0000:00:19.0: reg 14: [mem 0xed12c000-0xed12cfff]
pci 0000:00:19.0: reg 18: [io 0xe040-0xe05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xed12e000-0xed12e3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xed120000-0xed123fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xed12d000-0xed12d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe0f0-0xe0f7]
pci 0000:00:1f.2: reg 14: [io 0xe0e0-0xe0e3]
pci 0000:00:1f.2: reg 18: [io 0xe0d0-0xe0d7]
pci 0000:00:1f.2: reg 1c: [io 0xe0c0-0xe0c3]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xed12b000-0xed12b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xed12a000-0xed12a0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:03:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:03:00.0: reg 14: [mem 0xef700000-0xef703fff 64bit]
pci 0000:03:00.0: reg 1c: [mem 0xef680000-0xef6bffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xef200000-0xef27ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: reg 174: [mem 0xef6c0000-0xef6c3fff 64bit]
pci 0000:03:00.0: reg 17c: [mem 0xef280000-0xef2bffff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xef200000-0xef7fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xec000000-0xecffffff]
pci 0000:05:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:05:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:05:00.0: reg 24: [io 0xa000-0xa07f]
pci 0000:05:00.0: reg 30: [mem 0xed000000-0xed07ffff pref]
pci 0000:05:00.1: reg 10: [mem 0xed080000-0xed083fff]
pci 0000:00:02.0: PCI bridge to [bus 05-05]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xec000000-0xed0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xee000000-0xeeffffff]
pci 0000:04:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:04:00.0: reg 24: [io 0xb000-0xb07f]
pci 0000:04:00.0: reg 30: [mem 0xef000000-0xef07ffff pref]
pci 0000:04:00.1: reg 10: [mem 0xef080000-0xef083fff]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:03.0: bridge window [mem 0xd8000000-0xe1ffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xe2800000-0xe2803fff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xe2400000-0xe27fffff 64bit pref]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 164: [mem 0x3c0000000000-0x3c0000003fff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 02-02]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:11.0: bridge window [mem 0xe2400000-0xe28fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.5: PCI bridge to [bus 06-06]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [mem 0xefa30000-0xefa3ffff 64bit]
pci 0000:07:00.0: reg 18: [mem 0xefa20000-0xefa2ffff 64bit]
pci 0000:07:00.0: reg 30: [mem 0xefa00000-0xefa1ffff pref]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 07-07]
pci 0000:00:1c.6: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.6: bridge window [mem 0xefa00000-0xefafffff]
pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:00.0: reg 10: [mem 0xef900000-0xef90ffff 64bit]
pci 0000:08:00.0: reg 18: [mem 0xef910000-0xef911fff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 08-08]
pci 0000:00:1c.7: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.7: bridge window [mem 0xef900000-0xef9fffff]
pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:09:05.0: reg 10: [mem 0xef800000-0xef800fff]
pci 0000:09:05.0: supports D1 D2
pci 0000:09:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:09:05.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xef800000-0xef8fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x3c0000000000-0x3c007fffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX8._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-ff])
pci_root PNP0A08:01: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:01: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:01: host bridge window [mem 0x000c0000-0x000dffff]
PCI host bridge to bus 0000:40
pci_bus 0000:40: root bus resource [io 0x0000-0x03af]
pci_bus 0000:40: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:40: root bus resource [mem 0x000c0000-0x000dffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
pci0000:40: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
vgaarb: bridge control possible 0000:05:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 49 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 50 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 51 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 4 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 48, 49, 50, 51, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 48 for MSI
hpet: hpet3 irq 49 for MSI
hpet: hpet4 irq 50 for MSI
hpet: hpet5 irq 51 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0620-0x063f]
pnp 00:02: [io 0x0800-0x07ff disabled]
pnp 00:02: [io 0x0610-0x061f]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0060]
pnp 00:03: [io 0x0064]
pnp 00:03: [irq 1]
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: [irq 12]
pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0081-0x0083]
pnp 00:05: [io 0x0087]
pnp 00:05: [io 0x0089-0x008b]
pnp 00:05: [io 0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x005f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x00f0-0x00ff]
pnp 00:09: [irq 13]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [io 0x0400-0x0453]
pnp 00:0a: [io 0x0458-0x047f]
pnp 00:0a: [io 0x1180-0x119f]
pnp 00:0a: [io 0x0500-0x057f]
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfec00000-0xfecfffff]
pnp 00:0a: [mem 0xfed08000-0xfed08fff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0b: [io 0x0454-0x0457]
pnp 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0c: [mem 0xfed00000-0xfed003ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0d: [io 0x0cf8-0x0cff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:02: [io 0x0620-0x063f] has been reserved
system 00:02: [io 0x0610-0x061f] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x0400-0x0453] has been reserved
system 00:0a: [io 0x0458-0x047f] has been reserved
system 00:0a: [io 0x1180-0x119f] has been reserved
system 00:0a: [io 0x0500-0x057f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [io 0x0454-0x0457] has been reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:02:00.0: reg 164: [mem 0x3c0000000000-0x3c0000003fff 64bit pref]
pci 0000:00:11.0: BAR 14: assigned [mem 0xd2000000-0xd20fffff]
pci 0000:03:00.0: reg 174: [mem 0xef6c0000-0xef6c3fff 64bit]
pci 0000:03:00.0: reg 17c: [mem 0xef280000-0xef2bffff 64bit]
pci 0000:03:00.0: reg 174: [mem 0xef6c0000-0xef6c3fff 64bit]
pci 0000:03:00.0: reg 17c: [mem 0xef280000-0xef2bffff 64bit]
pci 0000:03:00.0: reg 17c: [mem 0xef280000-0xef2bffff 64bit]
pci 0000:03:00.0: BAR 9: assigned [mem 0xef280000-0xef67ffff 64bit]
pci 0000:03:00.0: BAR 9: set to [mem 0xef280000-0xef67ffff 64bit] (PCI address [0xef280000-0xef67ffff]
pci 0000:03:00.0: reg 174: [mem 0xef6c0000-0xef6c3fff 64bit]
pci 0000:03:00.0: reg 174: [mem 0xef6c0000-0xef6c3fff 64bit]
pci 0000:03:00.0: BAR 7: assigned [mem 0xef6c0000-0xef6fffff 64bit]
pci 0000:03:00.0: BAR 7: set to [mem 0xef6c0000-0xef6fffff 64bit] (PCI address [0xef6c0000-0xef6fffff]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xef200000-0xef7fffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 05-05]
pci 0000:00:02.0: PCI bridge to [bus 05-05]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xec000000-0xed0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:03.0: bridge window [mem 0xd8000000-0xe1ffffff 64bit pref]
pci 0000:02:00.0: reg 164: [mem 0x3c0000000000-0x3c0000003fff 64bit pref]
pci 0000:02:00.0: reg 164: [mem 0x3c0000000000-0x3c0000003fff 64bit pref]
pci 0000:02:00.0: reg 164: [mem 0x3c0000000000-0x3c0000003fff 64bit pref]
pci 0000:02:00.0: BAR 7: assigned [mem 0xe2804000-0xe287ffff 64bit pref]
pci 0000:02:00.0: BAR 7: set to [mem 0xe2804000-0xe287ffff 64bit pref] (PCI address [0xe2804000-0xe287ffff]
pci 0000:00:11.0: PCI bridge to [bus 02-02]
pci 0000:00:11.0: PCI bridge to [bus 02-02]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xd2000000-0xd20fffff]
pci 0000:00:11.0: bridge window [mem 0xe2400000-0xe28fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 06-06]
pci 0000:00:1c.5: PCI bridge to [bus 06-06]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 07-07]
pci 0000:00:1c.6: PCI bridge to [bus 07-07]
pci 0000:00:1c.6: bridge window [io disabled]
pci 0000:00:1c.6: bridge window [mem 0xefa00000-0xefafffff]
pci 0000:00:1c.6: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 08-08]
pci 0000:00:1c.7: PCI bridge to [bus 08-08]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem 0xef900000-0xef9fffff]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 09-09]
pci 0000:00:1e.0: PCI bridge to [bus 09-09]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xef800000-0xef8fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xefffffff]
pci_bus 0000:00: resource 11 [mem 0x3c0000000000-0x3c007fffffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xef200000-0xef7fffff]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xec000000-0xed0fffff]
pci_bus 0000:05: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xee000000-0xef0fffff]
pci_bus 0000:04: resource 2 [mem 0xd8000000-0xe1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd20fffff]
pci_bus 0000:02: resource 2 [mem 0xe2400000-0xe28fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xefa00000-0xefafffff]
pci_bus 0000:08: resource 1 [mem 0xef900000-0xef9fffff]
pci_bus 0000:09: resource 1 [mem 0xef800000-0xef8fffff]
pci_bus 0000:09: resource 4 [io 0x0000-0x03af]
pci_bus 0000:09: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:09: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:09: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:09: resource 10 [mem 0xc0000000-0xefffffff]
pci_bus 0000:09: resource 11 [mem 0x3c0000000000-0x3c007fffffff]
pci_bus 0000:40: resource 4 [io 0x0000-0x03af]
pci_bus 0000:40: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:40: resource 6 [mem 0x000c0000-0x000dffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:05:00.0: Boot video device
pci 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:08:00.0: PCI INT A disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16678k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1406845155.574:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31744
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 970DD299E15A8A25
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: mem 0x0 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0x0, slave address 0x20, irq 0
ipmi_si: Could not set up I/O space
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:16.3: ttyS0 at I/O 0xe060 (irq = 17) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xed12e000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xed12d000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2014-07-31 22:19:16 UTC (1406845156)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 796k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ata_generic 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ata_generic 0000:00:16.2: setting latency timer to 64
scsi0 : ata_generic
scsi1 : ata_generic
ata1: PATA max UDMA/100 cmd 0xe0b0 ctl 0xe0a0 bmdma 0xe070 irq 18
ata2: PATA max UDMA/100 cmd 0xe090 ctl 0xe080 bmdma 0xe078 irq 18
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
mpt2sas version 15.101.00.00 loaded
scsi2 : Fusion MPT SAS Host
mpt2sas 0000:03:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mpt2sas 0000:03:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16256680 kB)
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 52 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 52
mpt2sas0: iomem(0x00000000ef700000), mapped(0xffffc90001970000), size(16384)
mpt2sas0: ioport(0x000000000000c000), size(256)
usb 2-1: new high speed USB device number 2 using ehci_hcd
mpt2sas0: sending diag reset !!
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 2-1.1: new low speed USB device number 3 using ehci_hcd
Refined TSC clocksource calibration: 2992.788 MHz.
Switching to clocksource tsc
usb 2-1.1: New USB device found, idVendor=03f0, idProduct=0024
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: HP Basic USB Keyboard
usb 2-1.1: Manufacturer: CHICONY
usb 2-1.1: configuration #1 chosen from 1 choice
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.1/input0
usb 2-1.2: new low speed USB device number 4 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c016
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Optical USB Mouse
usb 2-1.2: Manufacturer: Logitech
usb 2-1.2: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1.2/input0
mpt2sas0: diag reset: SUCCESS
mpt2sas0: Allocated physical memory: size(3392 kB)
mpt2sas0: Current Controller Queue Depth(1483), Max Controller Queue Depth(1720)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2008: FWVersion(12.00.02.00), ChipRevision(0x03), BiosVersion(07.23.02.00)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b004bccb50), phys(8)
mpt2sas0: _scsih_sas_broadcast_primitive_event: enter: phy number(6), width(1)
mpt2sas0: _scsih_sas_broadcast_primitive_event: enter: phy number(5), width(6)
mpt2sas0: port enable: SUCCESS
scsi 2:0:0:0: Direct-Access SEAGATE ST9300605SS HPS0 PQ: 0 ANSI: 5
scsi 2:0:0:0: SSP: handle(0x000a), sas_addr(0x5000c5004bd456c5), phy(7), device_name(0x5000c5004bd456c4)
scsi 2:0:0:0: SSP: enclosure_logical_id(0x500605b004bccb50), slot(0)
scsi 2:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
scsi 2:0:1:0: Direct-Access SEAGATE ST9300605SS HPS0 PQ: 0 ANSI: 5
scsi 2:0:1:0: SSP: handle(0x0009), sas_addr(0x5000c50047d7498d), phy(5), device_name(0x5000c50047d7498c)
scsi 2:0:1:0: SSP: enclosure_logical_id(0x500605b004bccb50), slot(2)
scsi 2:0:1:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
scsi 2:0:2:0: Direct-Access SEAGATE ST9300605SS HPS0 PQ: 0 ANSI: 5
scsi 2:0:2:0: SSP: handle(0x000b), sas_addr(0x5000c50047d70199), phy(6), device_name(0x5000c50047d70198)
scsi 2:0:2:0: SSP: enclosure_logical_id(0x500605b004bccb50), slot(1)
scsi 2:0:2:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
scsi 2:1:0:0: Direct-Access LSI Logical Volume 3000 PQ: 0 ANSI: 6
scsi 2:1:0:0: RAID0: handle(0x011e), wwid(0x0e233ab021df058c), pd_count(2), type(SSP)
scsi 2:1:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0-rh
isci 0000:02:00.0: driver configured for rev: 5 silicon
isci 0000:02:00.0: OEM parameter table found in OROM
isci 0000:02:00.0: OEM SAS parameters (version: 1.1) loaded (platform)
isci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
isci 0000:02:00.0: setting latency timer to 64
isci 0000:02:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi3 : isci
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
isci 0000:02:00.0: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
isci 0000:02:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:08:00.0: setting latency timer to 64
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:08:00.0: irq 55 for MSI/MSI-X
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:08:00.0: irq 56 for MSI/MSI-X
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:08:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:08:00.0: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:08:00.0: irq 59 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:08:00.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:08:00.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 60 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata3: SATA max UDMA/133 abar m2048@0xed12b000 port 0xed12b100 irq 60
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xed12b000 port 0xed12b200 irq 60
ata6: DUMMY
ata7: DUMMY
ata8: DUMMY
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: hp DVD A DH16ACSH, JHD5, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
scsi 6:0:0:0: CD-ROM hp DVD A DH16ACSH JHD5 PQ: 0 ANSI: 5
firewire_ohci 0000:09:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:09:05.0, OHCI version 1.0
sd 2:1:0:0: [sdb] 1167966208 512-byte logical blocks: (597 GB/556 GiB)
sd 2:1:0:0: [sdb] 4096-byte physical blocks
sd 2:1:0:0: [sdb] Write Protect is off
sd 2:1:0:0: [sdb] Mode Sense: 03 00 00 08
sd 2:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sdb:
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: e7 00 10 08
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
sdb1
sd 2:1:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda3
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
firewire_core: created device fw0: GUID 0060b000008c3786, S400
type=1404 audit(1406845167.112:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: registered PHC clock
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) e8:39:35:63:24:ba
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
hda_intel: Disabling MSI
hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:05:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input11
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:04:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
hda_intel: Disabling MSI
hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:04:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input15
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
nvidia 0000:05:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:05:00.0 to PCI:0000:04:00.0
nvidia 0000:04:00.0: enabling device (0100 -> 0103)
nvidia 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
nvidia 0000:04:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.67 Fri Apr 4 13:48:39 PDT 2014
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:1:0: Attached scsi generic sg1 type 0
scsi 2:0:2:0: Attached scsi generic sg2 type 0
sd 2:1:0:0: Attached scsi generic sg3 type 0
sr 6:0:0:0: Attached scsi generic sg4 type 5
ACPI: WMI: Mapper loaded
tg3.c:v3.132 (May 21, 2013)
tg3 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
tg3 0000:07:00.0: setting latency timer to 64
tg3 0000:07:00.0: eth1: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address 00:10:18:b1:c9:df
tg3 0000:07:00.0: eth1: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:07:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:07:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0xe000-0xe01f] conflicts with ACPI region SMIO [io 0xe000-0xe01f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70e
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70e
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70e
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70e
platform microcode: firmware: requesting intel-ucode/06-2d-07
Microcode Update Driver: v2.00 , Peter Oruba
iTCO_vendor_support: vendor-support=0
microcode: CPU0 updated to revision 0x710, date = 2013-06-17
microcode: CPU1 updated to revision 0x710, date = 2013-06-17
microcode: CPU2 updated to revision 0x710, date = 2013-06-17
microcode: CPU3 updated to revision 0x710, date = 2013-06-17
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
kvm: disabled by bios
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
Adding 4194296k swap on /dev/sda5. Priority:-1 extents:1 across:4194296k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
tg3 0000:07:00.0: irq 63 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
8021q: adding VLAN 0 to HW filter on device virbr0
Ebtables v2.0 registered
lo: Disabled Privacy Extensions
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
nvidia 0000:05:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
nvidia 0000:04:00.0: irq 65 for MSI/MSI-X
eth0: no IPv6 routers present
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.