dmesg - xplane11
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008d7ff] usable
BIOS-e820: [mem 0x000000000008d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x000000007a75afff] usable
BIOS-e820: [mem 0x000000007a75b000-0x000000007a78afff] reserved
BIOS-e820: [mem 0x000000007a78b000-0x000000007a79afff] ACPI data
BIOS-e820: [mem 0x000000007a79b000-0x000000007a8dffff] ACPI NVS
BIOS-e820: [mem 0x000000007a8e0000-0x000000007abcbfff] reserved
BIOS-e820: [mem 0x000000007abcc000-0x000000007abccfff] usable
BIOS-e820: [mem 0x000000007abcd000-0x000000007ac0efff] reserved
BIOS-e820: [mem 0x000000007ac0f000-0x000000007ad8cfff] usable
BIOS-e820: [mem 0x000000007ad8d000-0x000000007aff6fff] reserved
BIOS-e820: [mem 0x000000007aff7000-0x000000007affffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 06/28/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7b000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07B000000 mask FFF000000 uncachable
2 base 07C000000 mask FFC000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1968MB, range: 16MB, type UC
reg 2, base: 1984MB, range: 64MB, type UC
total RAM covered: 1968M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1968MB, range: 16MB, type UC
reg 2, base: 1984MB, range: 64MB, type UC
found SMP MP-table at [mem 0x000fd670-0x000fd67f] mapped at [c00fd670]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0089000] 89000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1effffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1effffff] page 2M
init_memory_mapping: [mem 0x20100000-0x33ffffff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0x33ffffff] page 2M
BRK [0x01b8e000, 0x01b8efff] PGTABLE
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b8f000, 0x01b8ffff] PGTABLE
RAMDISK: [mem 0x35c3e000-0x36e16fff]
ACPI: RSDP 000f04a0 000024 (v02 ALASKA)
ACPI: XSDT 7a792080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 7a799cf0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 7a792188 007B68 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 7a8dff80 000040
ACPI: APIC 7a799e00 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 7a799e88 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ECDT 7a799ed0 0000C1 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 7a799f98 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: LPIT 7a799fd8 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
ACPI: HPET 7a79a0e0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 7a79a118 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 7a79a880 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 7a79ab10 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 7a79ac90 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: Local APIC address 0xfee00000
1076MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b90000, 0x01b90fff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x7affffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008cfff]
node 0: [mem 0x00100000-0x1effffff]
node 0: [mem 0x20100000-0x7a75afff]
node 0: [mem 0x7abcc000-0x7abccfff]
node 0: [mem 0x7ac0f000-0x7ad8cfff]
node 0: [mem 0x7aff7000-0x7affffff]
On node 0 totalpages: 497519
free_area_init_node: node 0, pgdat c1997200, node_mem_map f4cde020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3980 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 219902 pages, LIFO batch:31
HighMem zone: 2153 pages used for memmap
HighMem zone: 273637 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] low level lint[0xaf])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] low level lint[0xaf])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] low level lint[0xaf])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] low level lint[0xaf])
ACPI: NMI not connected to LINT 1!
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: [mem 0x0008d000-0x0008dfff]
PM: Registered nosave memory: [mem 0x0008e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x1f000000-0x200fffff]
e820: [mem 0x80000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bba000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 495735
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 4030456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007b000)
Memory: 1939136K/1990076K available (6528K kernel code, 639K rwdata, 2760K rodata, 872K init, 924K bss, 50940K reserved, 1094548K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19b4000 - 0xc1a8e000 ( 872 kB)
.data : 0xc1660532 - 0xc19b3e80 (3406 kB)
.text : 0xc1000000 - 0xc1660532 (6529 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:1024 16
CPU 0 irqstacks, hard=f700c000 soft=f700e000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1833.407 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.81 BogoMIPS (lpj=7333628)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (c1a8e000 - c1a96000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27783 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz (fam: 06, model: 37, stepping: 08)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f7100000 soft=f7102000
x86: Booting SMP configuration:
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
CPU 2 irqstacks, hard=f71a0000 soft=f71a2000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f71e4000 soft=f71e6000
Initializing CPU#3
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14667.25 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7a79b000-0x7a8dffff] (1331200 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 7:54:28, date: 07/31/14
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI BIOS Warning (bug): Incorrect checksum in table [ECDT] - 0xFE, should be 0xD5 (20131115/tbprint-214)
ACPI : EC: EC description table is found, configuring boot EC
ACPI: SSDT 7a783c18 0003BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 7a782918 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 7a784e18 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 7a785f18 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0706fff]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:13.0: reg 0x24: [mem 0xd0706000-0xd07067ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd0700000-0xd0703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd0705000-0xd07053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd0704000-0xd070401f]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xd0604000-0xd0604fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0600000-0xd0603fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008d800-0x0008ffff]
e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
e820: reserve RAM buffer [mem 0x7a75b000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7abcd000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7ad8d000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x0400-0x047f] has been reserved
system 00:03: [io 0x0500-0x05fe] has been reserved
system 00:03: [io 0x0600-0x061f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a10-0x0a2f] has been reserved
system 00:04: [io 0x0a30-0x0a4f] has been reserved
system 00:04: [io 0x0a50-0x0a6f] has been reserved
system 00:04: [io 0x0a70-0x0a7f] has been reserved
system 00:04: [io 0x0a80-0x0a8f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:06: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xd0706fff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18276K (f5c3e000 - f6e17000)
microcode: CPU0 sig=0x30678, pf=0x8, revision=0x809
microcode: CPU1 sig=0x30678, pf=0x8, revision=0x809
microcode: CPU2 sig=0x30678, pf=0x8, revision=0x809
microcode: CPU3 sig=0x30678, pf=0x8, revision=0x809
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1406793269.968:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1685
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: cannot reserve video memory at 0xa0000
efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 64k, total 64k
efifb: mode is 640x480x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 55
ipmi message handler version 39.2
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery absent)
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0705000
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: a7fc6590fc4a8d859aaebda2ca5dd04716244fa0'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:966:926
rtc_cmos 00:00: setting system clock to 2014-07-31 07:54:30 UTC (1406793270)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
isapnp: No Plug & Play device found
Freeing unused kernel memory: 872K (c19b4000 - c1a8e000)
Write protecting the kernel text: 6532k
Write protecting the kernel read-only data: 2764k
NX-protecting the kernel data: 5756k
systemd-udevd[108]: starting version 204
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: irq 103 for MSI/MSI-X
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 104 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xf841c000, 04:8c:03:00:09:ea, XID 0c900800 IRQ 104
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x2 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds
scsi0 : ahci
scsi1 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xd0706000 port 0xd0706180 irq 103
usb 1-1: New USB device found, idVendor=8087, idProduct=07e6
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new low-speed USB device number 3 using ehci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1.1: New USB device found, idVendor=045e, idProduct=078c
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: USB Keyboard
usb 1-1.1: Manufacturer: LITEON Technology
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
hid-generic 0003:045E:078C.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1d.0-1.1/input0
usb 1-1.2: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 1833.332 MHz
usb 1-1.2: New USB device found, idVendor=058f, idProduct=6254
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
usb 1-1.3: new low-speed USB device number 5 using ehci-pci
usb 1-1.3: New USB device found, idVendor=045e, idProduct=0797
usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
hid-generic 0003:045E:0797.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
usb 1-1.2.2: new full-speed USB device number 6 using ehci-pci
usb 1-1.2.2: New USB device found, idVendor=0eef, idProduct=0001
usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.2: Product: USB TouchController
usb 1-1.2.2: Manufacturer: eGalax Inc.
usb 1-1.2.3: new full-speed USB device number 7 using ehci-pci
usb 1-1.2.3: New USB device found, idVendor=eb03, idProduct=0920
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: ARMVE v1.0
usb 1-1.2.3: Manufacturer: MSA S.A.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
random: init urandom read with 128 bits of entropy available
random: nonblocking pool is initialized
Adding 1972220k swap on /dev/sda5. Priority:-1 extents:1 across:1972220k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[276]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (a0000 10000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 105 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
systemd-udevd[309]: renamed network interface eth0 to eth2
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0a: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 106 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x40478b2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x0000008b
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x19
realtek: No valid SSID, checking pincfg 0x40478b2d for NID 0x1d
realtek: Enabling init ASM_ID=0x8b2d CODEC_ID=10ec0662
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
type=1400 audit(1406793282.243:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=399 comm="apparmor_parser"
type=1400 audit(1406793282.243:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
type=1400 audit(1406793282.243:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
type=1400 audit(1406793282.243:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
type=1400 audit(1406793282.243:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
type=1400 audit(1406793282.243:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
type=1400 audit(1406793282.247:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=398 comm="apparmor_parser"
type=1400 audit(1406793282.247:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=398 comm="apparmor_parser"
type=1400 audit(1406793282.247:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=398 comm="apparmor_parser"
type=1400 audit(1406793282.247:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=398 comm="apparmor_parser"
cdc_acm 1-1.2.3:1.0: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-1.2.3:1.0: ttyACM0: USB ACM device
input: eGalax Inc. USB TouchController Pen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input9
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
input: eGalax Inc. USB TouchController as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input10
hid-multitouch 0003:0EEF:0001.0003: input,hiddev0,hidraw2: USB HID v1.00 Pointer [eGalax Inc. USB TouchController] on usb-0000:00:1d.0-1.2.2/input0
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (602) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (691) killed by HUP signal
init: cups main process ended, respawning
r8169 0000:02:00.0 eth2: link down
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1069) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
input: eGalaxTouch Virtual Device for Single as /devices/virtual/input/input12
audit_printk_skb: 168 callbacks suppressed
type=1400 audit(1406793314.559:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1817 comm="apparmor_parser"
type=1400 audit(1406793314.559:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1817 comm="apparmor_parser"
type=1400 audit(1406793314.563:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1817 comm="apparmor_parser"
r8169 0000:02:00.0 eth2: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
usb 1-1.2.4: new high-speed USB device number 8 using ehci-pci
usb 1-1.2.4: New USB device found, idVendor=0930, idProduct=6545
usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.4: Product: DataTraveler G3
usb 1-1.2.4: Manufacturer: KINGSTON
usb 1-1.2.4: SerialNumber: 1012081709551838Kingston
usb-storage 1-1.2.4:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-1.2.4:1.0
usbcore: registered new interface driver usb-storage
scsi 2:0:0:0: Direct-Access KINGSTON DataTraveler G3 1100 PQ: 0 ANSI: 4
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 30035968 512-byte logical blocks: (15.3 GB/14.3 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-hostnamed[2229]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
FAT-fs (sdb1): error, invalid access to FAT (entry 0x3fdc3ccb)
FAT-fs (sdb1): Filesystem has been set read-only
FAT-fs (sdb1): error, invalid access to FAT (entry 0xf46fff4d)
FAT-fs (sdb1): error, invalid access to FAT (entry 0x3fdc3ccb)
FAT-fs (sdb1): error, invalid access to FAT (entry 0xf46fff4d)
type=1400 audit(1406801207.991:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6114 comm="apparmor_parser"
type=1400 audit(1406801207.991:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6114 comm="apparmor_parser"
type=1400 audit(1406801207.991:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6114 comm="apparmor_parser"
usb 1-1.2.4: USB disconnect, device number 8
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
systemd-hostnamed[7064]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
mce: [Hardware Error]: Machine check events logged
perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5013 > 5000), lowering kernel.perf_event_max_sample_rate to 25000