dmesg - first
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000a0daffff] usable
BIOS-e820: [mem 0x00000000a0db0000-0x00000000a21affff] reserved
BIOS-e820: [mem 0x00000000a21b0000-0x00000000a6abefff] usable
BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved
BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Acer Aspire E1-571/EA50_HC_CR, BIOS V2.15 03/11/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 0A0000000 mask FFC000000 write-back
3 base 0A4000000 mask FFE000000 write-back
4 base 0A6000000 mask FFF000000 write-back
5 base 0FFC00000 mask FFFC00000 write-protect
6 base 100000000 mask F80000000 write-back
7 base 14F600000 mask FFFE00000 uncachable
8 base 14F800000 mask FFF800000 uncachable
9 base 150000000 mask FF0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[mem 0x14f400000-0x14f5fffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[mem 0x14c000000-0x14f3fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x14bffffff]
[mem 0x100000000-0x14bffffff] page 2M
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x40003fff]
[mem 0x20200000-0x3fffffff] page 2M
[mem 0x40000000-0x40003fff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x40005000-0xa0daffff]
[mem 0x40005000-0x401fffff] page 4k
[mem 0x40200000-0xa0bfffff] page 2M
[mem 0xa0c00000-0xa0daffff] page 4k
init_memory_mapping: [mem 0xa21b0000-0xa6abefff]
[mem 0xa21b0000-0xa21fffff] page 4k
[mem 0xa2200000-0xa69fffff] page 2M
[mem 0xa6a00000-0xa6abefff] page 4k
init_memory_mapping: [mem 0xa6fff000-0xa6ffffff]
[mem 0xa6fff000-0xa6ffffff] page 4k
RAMDISK: [mem 0x35b6a000-0x36dacfff]
ACPI: RSDP 00000000000fe020 000024 (v02 ACRSYS)
ACPI: XSDT 00000000a6ffe210 000094 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 00000000a6ffb000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 00000000a6fec000 00BB9E (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS 00000000a6fba000 000040
ACPI: UEFI 00000000a6ffd000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASF! 00000000a6ffc000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 00000000a6ffa000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 00000000a6ff9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 00000000a6ff8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000a6feb000 0006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: BOOT 00000000a6fe9000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASPT 00000000a6fe4000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DBGP 00000000a6fe3000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 00000000a6fe1000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM 00000000a6fe0000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000a6fdf000 0008A2 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 00000000a6fde000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
NODE_DATA [mem 0x14f5f5000-0x14f5f9fff]
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x14f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0xa0daffff]
node 0: [mem 0xa21b0000-0xa6abefff]
node 0: [mem 0xa6fff000-0xa6ffffff]
node 0: [mem 0x100000000-0x14f5fffff]
On node 0 totalpages: 1002075
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 10515 pages used for memmap
DMA32 zone: 672959 pages, LIFO batch:31
Normal zone: 5080 pages used for memmap
Normal zone: 325120 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xa0db0000-0xa21affff]
PM: Registered nosave memory: [mem 0xa6abf000-0xa6ebefff]
PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff]
PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff]
PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffc7ffff]
PM: Registered nosave memory: [mem 0xffc80000-0xffffffff]
e820: [mem 0xafa00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 986395
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3842476K/4008300K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 165824K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16252928 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2195.196 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.39 BogoMIPS (lpj=8780784)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (35123.13 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 12:10:23, date: 07/27/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000a6df7018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: SSDT 00000000a6df8a98 000303 (v01 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20120913)
ACPI: SSDT 00000000a6df6d98 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc0604000-0xc060400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc0609000-0xc06093ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc0600000-0xc0603fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc0608000-0xc06083ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc0607000-0xc06077ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc0605000-0xc06050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xc0430000-0xc043ffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xc0440000-0xc044ffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
pci 0000:02:00.1: reg 0x10: [mem 0xc0400000-0xc040ffff 64bit pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000
pci 0000:02:00.2: reg 0x10: [mem 0xc0410000-0xc041ffff 64bit pref]
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000
pci 0000:02:00.3: reg 0x10: [mem 0xc0420000-0xc042ffff 64bit pref]
pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xc0500000-0xc057ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xa0db0000-0xa3ffffff]
e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0xfd60-0xfd63] has been reserved
system 00:06: [io 0x1000-0x100f] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0x0400-0x0453] could not be reserved
system 00:06: [io 0x0458-0x047f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x164e-0x164f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xff000000-0xff000fff] has been reserved
system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:02:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafbfffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xafc00000-0xafcfffff pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xc0450000-0xc04507ff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafbfffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xafc00000-0xafc0ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:00:1c.1: bridge window [mem 0xafc00000-0xafcfffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafbfffff]
pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
pci_bus 0000:03: resource 2 [mem 0xafc00000-0xafcfffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18700K (ffff880035b6a000 - ffff880036dad000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa2abf000-0xa6abf000] (64MB) mapped at [ffff8800a2abf000-ffff8800a6abefff]
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x17
microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1406463023.932:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7541
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0609000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0608000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:922:178
acpi device:0e: hash matches
platform: hash matches
rtc_cmos 00:07: setting system clock to 2014-07-27 12:10:25 UTC (1406463025)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[144]: starting version 204
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
sdhci-pci 0000:02:00.1: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:02:00.1: dummy supplies not allowed
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
tg3.c:v3.134 (Sep 16, 2013)
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc0607000 port 0xc0607100 irq 40
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xc0607000 port 0xc0607200 irq 40
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:c2:fa:fc
tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30001, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 2BA3 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
tsc: Refined TSC clocksource calibration: 2195.019 MHz
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: MATSHITA DVD-RAM UJ8E1, 1.00, max UDMA/100
ata3.00: configured for UDMA/100
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8E1 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2c18
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: HD WebCam
usb 1-1.3: Manufacturer: NC.21411.00X3210850ALM0009
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.2: new full-speed USB device number 3 using ehci-pci
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1694, fw id: 705179
usb 2-1.2: New USB device found, idVendor=062a, idProduct=4101
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: 2.4G Keyboard Mouse
usb 2-1.2: Manufacturer: MOSART Semi.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
Switched to clocksource tsc
random: nonblocking pool is initialized
Adding 4006908k swap on /dev/sda5. Priority:-1 extents:1 across:4006908k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[332]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x1
acer_wmi: Brightness must be controlled by acpi video driver
acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input7
input: Acer BMA150 accelerometer as /devices/virtual/input/input8
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
[drm] Memory usable by graphics device = 2048M
checking generic (b0000000 410000) vs hw (b0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004880000, irq=17
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
type=1400 audit(1406463040.332:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=499 comm="apparmor_parser"
type=1400 audit(1406463040.332:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=499 comm="apparmor_parser"
type=1400 audit(1406463040.332:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=499 comm="apparmor_parser"
type=1400 audit(1406463040.332:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=497 comm="apparmor_parser"
type=1400 audit(1406463040.332:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=497 comm="apparmor_parser"
type=1400 audit(1406463040.332:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=497 comm="apparmor_parser"
type=1400 audit(1406463040.332:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=499 comm="apparmor_parser"
type=1400 audit(1406463040.332:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=499 comm="apparmor_parser"
type=1400 audit(1406463040.332:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=499 comm="apparmor_parser"
type=1400 audit(1406463040.336:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=497 comm="apparmor_parser"
[drm] failed to retrieve link info, disabling eDP
fbcon: inteldrmfb (fb0) is primary device
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c18)
input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input10
hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1.2/input0
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input11
hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1.2/input1
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:3e: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
hda_codec: ALC269VB: SKU not ready 0x598301f0
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Internal Mic=0x1b
Mic=0x18
realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (761) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (876) killed by HUP signal
init: cups main process ended, respawning
tg3 0000:02:00.0: irq 44 for MSI/MSI-X
tg3 0000:02:00.0: irq 45 for MSI/MSI-X
tg3 0000:02:00.0: irq 46 for MSI/MSI-X
tg3 0000:02:00.0: irq 47 for MSI/MSI-X
tg3 0000:02:00.0: irq 48 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: samba-ad-dc main process (919) terminated with status 1
audit_printk_skb: 15 callbacks suppressed
type=1400 audit(1406463047.304:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=968 comm="apparmor_parser"
type=1400 audit(1406463047.304:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=968 comm="apparmor_parser"
type=1400 audit(1406463047.304:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=968 comm="apparmor_parser"
type=1400 audit(1406463047.304:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=968 comm="apparmor_parser"
type=1400 audit(1406463047.304:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=968 comm="apparmor_parser"
type=1400 audit(1406463047.304:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=968 comm="apparmor_parser"
type=1400 audit(1406463047.304:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=974 comm="apparmor_parser"
type=1400 audit(1406463047.304:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=974 comm="apparmor_parser"
type=1400 audit(1406463047.308:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=974 comm="apparmor_parser"
type=1400 audit(1406463047.308:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=973 comm="apparmor_parser"
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
wlan0: authenticate with 10:bf:48:e5:de:3b
wlan0: send auth to 10:bf:48:e5:de:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 10:bf:48:e5:de:3b (try 1/3)
wlan0: RX AssocResp from 10:bf:48:e5:de:3b (capab=0x411 status=0 aid=8)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 10:bf:48:e5:de:3b by local choice (reason=2)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 10:bf:48:e5:de:3b
wlan0: send auth to 10:bf:48:e5:de:3b (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 10:bf:48:e5:de:3b (try 1/3)
wlan0: RX AssocResp from 10:bf:48:e5:de:3b (capab=0x411 status=0 aid=8)
wlan0: associated
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1542) terminated with status 1
init: anacron main process (1105) killed by TERM signal
audit_printk_skb: 126 callbacks suppressed
type=1400 audit(1406463073.867:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2150 comm="apparmor_parser"
type=1400 audit(1406463073.867:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2150 comm="apparmor_parser"
type=1400 audit(1406463073.867:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2150 comm="apparmor_parser"
ip6_tables: (C) 2000-2006 Netfilter Core Team
systemd-hostnamed[2994]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
wlan0: deauthenticating from 10:bf:48:e5:de:3b by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: anacron main process (9115) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 1026.830 msecs
PM: late suspend of devices complete after 16.001 msecs
tg3 0000:02:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.890 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 40
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
Broke affinity for irq 17
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
Broke affinity for irq 16
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 141.092 msecs
PM: early resume of devices complete after 0.088 msecs
mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
tg3 0000:02:00.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x43
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
usb 1-1.3: reset high-speed USB device number 3 using ehci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:00 failed to resume: error -19
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 1425.681 msecs
PM: Finishing wakeup.
tg3 0000:02:00.0: no hotplug settings from platform
sdhci-pci 0000:02:00.1: no hotplug settings from platform
pci 0000:02:00.2: no hotplug settings from platform
pci 0000:02:00.3: no hotplug settings from platform
ath9k 0000:03:00.0: no hotplug settings from platform
Restarting tasks ... done.
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
video LNXVIDEO:00: Restoring backlight state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:02:00.0: irq 44 for MSI/MSI-X
tg3 0000:02:00.0: irq 45 for MSI/MSI-X
tg3 0000:02:00.0: irq 46 for MSI/MSI-X
tg3 0000:02:00.0: irq 47 for MSI/MSI-X
tg3 0000:02:00.0: irq 48 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
tg3 0000:02:00.0 eth0: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: authenticate with 10:bf:48:e5:de:3b
wlan0: send auth to 10:bf:48:e5:de:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 10:bf:48:e5:de:3b (try 1/3)
wlan0: RX AssocResp from 10:bf:48:e5:de:3b (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 10:bf:48:e5:de:3b by local choice (reason=2)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 10:bf:48:e5:de:3b
wlan0: send auth to 10:bf:48:e5:de:3b (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 10:bf:48:e5:de:3b (try 1/3)
wlan0: RX AssocResp from 10:bf:48:e5:de:3b (capab=0x411 status=0 aid=5)
wlan0: associated
[Firmware Bug]: battery: (dis)charge rate invalid.
systemd-hostnamed[10566]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
type=1400 audit(1406468129.732:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=13968 comm="apparmor_parser"
type=1400 audit(1406468129.732:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=13968 comm="apparmor_parser"
type=1400 audit(1406468129.732:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=13968 comm="apparmor_parser"
systemd-hostnamed[13996]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000