dmesg - asus-k50in-compilation
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-30-generic (buildd@akateko) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #54-Ubuntu SMP Mon Jun 9 22:47:59 UTC 2014 (Ubuntu 3.13.0-30.54-generic 3.13.11.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bffa7fff] usable
BIOS-e820: [mem 0x00000000bffa8000-0x00000000bffaffff] ACPI NVS
BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbfeff] ACPI data
BIOS-e820: [mem 0x00000000bffbff00-0x00000000bffeffff] ACPI NVS
BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff700000-0x000000011fffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: ASUSTeK Computer Inc. K50IN /K50IN , BIOS 213 07/22/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xbffa8 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b8c000, 0x01b8cfff] PGTABLE
RAMDISK: [mem 0x35b8c000-0x36dbdfff]
ACPI: RSDP 000fa3c0 000024 (v02 ACPIAM)
ACPI: XSDT bffb0100 00007C (v01 072209 XSDT1701 20090722 MSFT 00000097)
ACPI: FACP bffb0290 0000F4 (v03 072209 FACP1701 20090722 MSFT 00000097)
ACPI: DSDT bffb06f0 00EB9D (v01 K50IN K50IN000 00000000 INTL 20051117)
ACPI: FACS bffbff00 000040
ACPI: APIC bffb0390 000080 (v01 072209 APIC1701 20090722 MSFT 00000097)
ACPI: MCFG bffb0450 00003C (v01 072209 OEMMCFG 20090722 MSFT 00000097)
ACPI: OEMX bffb0490 000176 (v01 072209 OEMX1701 20090722 MSFT 00000097)
ACPI: WDRT bffb0610 000047 (v01 072209 NV-WDRT 20090722 MSFT 00000097)
ACPI: ECDT bffb0690 000054 (v01 072209 OEMECDT 20090722 MSFT 00000097)
ACPI: DBGP bffb0410 000034 (v01 072209 DBGP1701 20090722 MSFT 00000097)
ACPI: BOOT bffb0660 000028 (v01 072209 BOOT1701 20090722 MSFT 00000097)
ACPI: OEMB bffbff40 000079 (v01 072209 OEMB1701 20090722 MSFT 00000097)
ACPI: HPET bffbf6f0 000038 (v01 072209 OEMHPET0 20090722 MSFT 00000097)
ACPI: SSDT bffc0d30 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
2179MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b8d000, 0x01b8dfff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0xbffa7fff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbffa7fff]
On node 0 totalpages: 786245
free_area_init_node: node 0, pgdat c1995100, node_mem_map f438c020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3997 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 4360 pages used for memmap
HighMem zone: 557994 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bb4000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 784461
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x3, cntxt size 0x240
allocated 6290744 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:000bffa8)
Memory: 3082628K/3144980K available (6522K kernel code, 639K rwdata, 2756K rodata, 872K init, 924K bss, 62352K reserved, 2231976K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19b2000 - 0xc1a8c000 ( 872 kB)
.data : 0xc165ef32 - 0xc19b1d80 (3403 kB)
.text : 0xc1000000 - 0xc165ef32 (6523 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f7008000 soft=f700a000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2199.994 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.98 BogoMIPS (lpj=8799976)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (c1a8c000 - c1a94000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27751 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f711e000 soft=f7120000
x86: Booting SMP configuration:
Initializing CPU#1
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8799.97 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbffa8000-0xbffaffff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0xbffbff00-0xbffeffff] (196864 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 12:58:07, date: 07/03/14
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT bffc0290 000206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT bffc0530 0007FB (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0007FB (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT bffc01c0 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT bffc04a0 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffffff]
pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfebfffff]
pci 0000:00:00.0: [10de:0a83] type 00 class 0x060000
pci 0000:00:00.1: [10de:0a88] type 00 class 0x050000
pci 0000:00:03.0: [10de:0aae] type 00 class 0x060100
pci 0000:00:03.0: reg 0x10: [io 0x4f00-0x4fff]
pci 0000:00:03.1: [10de:0aa4] type 00 class 0x050000
pci 0000:00:03.2: [10de:0aa2] type 00 class 0x0c0500
pci 0000:00:03.2: reg 0x10: [io 0x4900-0x493f]
pci 0000:00:03.2: reg 0x20: [io 0x4d00-0x4d3f]
pci 0000:00:03.2: reg 0x24: [io 0x4e00-0x4e3f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:03.3: [10de:0a89] type 00 class 0x050000
pci 0000:00:03.5: [10de:0aa3] type 00 class 0x0b4000
pci 0000:00:03.5: reg 0x10: [mem 0xfae80000-0xfaefffff]
pci 0000:00:04.0: [10de:0aa5] type 00 class 0x0c0310
pci 0000:00:04.0: reg 0x10: [mem 0xfae7f000-0xfae7ffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:04.1: [10de:0aa6] type 00 class 0x0c0320
pci 0000:00:04.1: reg 0x10: [mem 0xfae7ec00-0xfae7ecff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:0ac0] type 00 class 0x040300
pci 0000:00:08.0: reg 0x10: [mem 0xfae78000-0xfae7bfff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [10de:0aab] type 01 class 0x060401
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:0ab9] type 00 class 0x010601
pci 0000:00:0b.0: reg 0x10: [io 0xc080-0xc087]
pci 0000:00:0b.0: reg 0x14: [io 0xc000-0xc003]
pci 0000:00:0b.0: reg 0x18: [io 0xbc00-0xbc07]
pci 0000:00:0b.0: reg 0x1c: [io 0xb880-0xb883]
pci 0000:00:0b.0: reg 0x20: [io 0xb800-0xb80f]
pci 0000:00:0b.0: reg 0x24: [mem 0xfae7c000-0xfae7dfff]
pci 0000:00:0c.0: [10de:0ac4] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [10de:0aa0] type 01 class 0x060400
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: [10de:0ac6] type 01 class 0x060400
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [10de:0ac7] type 01 class 0x060400
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xc0000000-0xfbffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfebfffff] (subtractive decode)
pci 0000:00:0c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:0873] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xdc00-0xdc7f]
pci 0000:03:00.0: reg 0x30: [mem 0xfafe0000-0xfaffffff pref]
pci 0000:00:10.0: PCI bridge to [bus 03]
pci 0000:00:10.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff]
pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfeaff000-0xfeafffff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:05:00.0: [168c:002b] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:00:16.0: PCI bridge to [bus 05]
pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffa8000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
hpet0: 4 comparators, 64-bit 25.000000 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:02: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x0800-0x080f] has been reserved
system 00:05: [io 0x4000-0x407f] could not be reserved
system 00:05: [io 0x4080-0x40ff] has been reserved
system 00:05: [io 0x4400-0x447f] has been reserved
system 00:05: [io 0x4480-0x44ff] has been reserved
system 00:05: [io 0x4800-0x487f] has been reserved
system 00:05: [io 0x4880-0x48ff] has been reserved
system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
system 00:05: [mem 0xfefe2000-0xfefe3fff] has been reserved
system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io 0x0250-0x0253] has been reserved
system 00:08: [io 0x0256-0x025f] has been reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x0260-0x026f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [io 0x5000-0x507f] has been reserved
system 00:0a: [io 0x5080-0x50ff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfc000000-0xfdffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0c: [mem 0xfc000000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:09.0: PCI bridge to [bus 01]
pci 0000:00:0c.0: PCI bridge to [bus 02]
pci 0000:00:10.0: PCI bridge to [bus 03]
pci 0000:00:10.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff]
pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:16.0: PCI bridge to [bus 05]
pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfbffffff]
pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xc0000000-0xfbffffff]
pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfaf00000-0xfbffffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf9ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18632K (f5b8c000 - f6dbe000)
Simple Boot Flag at 0xef set to 0x1
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1404392287.672:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1697
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 21
ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 20
ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 23
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xf8480000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ipmi message handler version 39.2
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:04.1: EHCI Host Controller
ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:04.1: debug port 1
ehci-pci 0000:00:04.1: cache line size of 64 is not supported
ehci-pci 0000:00:04.1: irq 22, io mem 0xfae7ec00
ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:04.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:04.0: OHCI PCI host controller
ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:04.0: irq 23, io mem 0xfae7f000
ACPI: Battery Slot [BAT0] (battery present)
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:04.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 941ac0021776208a30b47336d7a1a15788c8b3ac'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:943:985
rtc_cmos 00:07: setting system clock to 2014-07-03 12:58:08 UTC (1404392288)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
isapnp: No Plug & Play device found
Freeing unused kernel memory: 872K (c19b2000 - c1a8c000)
Write protecting the kernel text: 6524k
Write protecting the kernel read-only data: 2764k
NX-protecting the kernel data: 5764k
systemd-udevd[95]: starting version 204
usb 1-5: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:0b.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs boh
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c100 irq 40
ata2: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c180 irq 40
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
r8169 0000:04:00.0: irq 41 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0xf8418000, 90:e6:ba:11:18:2d, XID 18000000 IRQ 41
r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
usb 1-5: New USB device found, idVendor=04f2, idProduct=b071
usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-5: Product: CNF7129
usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-5: SerialNumber: SN0001
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATAPI: Slimtype DVD A DS8A3S, HA26, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A3S HA26 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
raid6: mmxx1 2830 MB/s
raid6: mmxx2 3235 MB/s
raid6: sse1x1 1878 MB/s
raid6: sse1x2 2421 MB/s
raid6: sse2x1 3326 MB/s
raid6: sse2x2 3864 MB/s
raid6: using algorithm sse2x2 (3864 MB/s)
raid6: using ssse3x1 recovery algorithm
xor: measuring software checksum speed
psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
pIII_sse : 8238.000 MB/sec
psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
prefetch64-sse: 9397.000 MB/sec
xor: using function: prefetch64-sse (9397.000 MB/sec)
bio: create slab at 1
Btrfs loaded
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
btrfs: device fsid c9a7a9bb-c368-4d93-9c78-9f34f329fc94 devid 1 transid 3960 /dev/sda3
btrfs: disk space caching is enabled
random: nonblocking pool is initialized
init: plymouth-upstart-bridge main process (172) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (182) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (184) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (186) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (188) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (189) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (191) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (192) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (194) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (195) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (197) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 3999740k swap on /dev/sda2. Priority:-1 extents:1 across:3999740k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[306]: starting version 204
systemd-udevd[338]: renamed network interface eth0 to eth18
type=1400 audit(1404392309.870:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=366 comm="apparmor_parser"
type=1400 audit(1404392309.870:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=366 comm="apparmor_parser"
type=1400 audit(1404392309.870:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser"
type=1400 audit(1404392309.870:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=366 comm="apparmor_parser"
type=1400 audit(1404392309.870:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser"
type=1400 audit(1404392309.874:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser"
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
acpi device:24: registered as cooling_device2
acpi device:25: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:23/LNXVIDEO:00/input/input14
asus_laptop: Asus Laptop Support version 0.42
asus_laptop: BSTS called, 0xff7f returned
asus_laptop: K50IN model detected
asus_laptop: Backlight controlled by ACPI video driver
input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input15
wmi: Mapper loaded
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
i2c i2c-0: nForce2 SMBus adapter at 0x4d00
ACPI Warning: 0x00004e00-0x00004e3f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux video capture interface: v2.00
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
hda_intel: Disabling MSI
hda-intel 0000:00:08.0: Disabling 64bit DMA
cfg80211: Calling CRDA to update world regulatory domain
hda-intel 0000:00:08.0: Enable delay in RIRB handling
[drm] Initialized drm 1.1.0 20060810
uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
MXM: GUID detected in BIOS
ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
checking generic (f9000000 130000) vs hw (e0000000 10000000)
checking generic (f9000000 130000) vs hw (f8000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[drm] hdmi device not found 3 0 1
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0ac980b1
nouveau [ DEVICE][0000:03:00.0] Chipset: MCP79/MCP7A (NVAC)
nouveau [ DEVICE][0000:03:00.0] Family : NV50
nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 62.79.5d.00.05
nouveau 0000:03:00.0: irq 42 for MSI/MSI-X
nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
nouveau [ PFB][0000:03:00.0] RAM type: stolen system memory
nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
ath: phy0: Enable LNA combining
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
nouveau [ PTHERM][0000:03:00.0] fan management: automatic
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
nouveau [ CLK][0000:03:00.0] 03: core 200 MHz shader 400 MHz vdec 200 MHz
nouveau [ CLK][0000:03:00.0] 05: core 300 MHz shader 600 MHz vdec 300 MHz
nouveau [ CLK][0000:03:00.0] 07: core 350 MHz shader 700 MHz vdec 350 MHz
nouveau [ CLK][0000:03:00.0] 0f: core 450 MHz shader 1100 MHz vdec 450 MHz
nouveau [ CLK][0000:03:00.0] --: core 450 MHz shader 1100 MHz vdec 450 MHz
[TTM] Zone kernel: Available graphics memory: 435094 kiB
[TTM] Zone highmem: Available graphics memory: 1551082 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 512 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000323 00010034
nouveau [ DRM] DCB outp 01: 02011300 0000001e
nouveau [ DRM] DCB conn 00: 00000040
nouveau [ DRM] DCB conn 01: 00000100
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] ACPI backlight interface available, not registering our own
nouveau [ DRM] MM: using M2MF for buffer copies
nouveau [ DRM] allocated 1366x768 fb: 0x50000, bo f0095000
fbcon: nouveaufb (fb0) is primary device
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8480000, irq=18
systemd-udevd[337]: renamed network interface wlan0 to wlan13
SKU: Nid=0x1d sku_cfg=0x40168a2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000006
SKU: customization=0x0000008a
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Internal Mic=0x19
Mic=0x18
realtek: No valid SSID, checking pincfg 0x40168a2d for NID 0x1d
realtek: Enabling init ASM_ID=0x8a2d CODEC_ID=10ec0662
btrfs: device fsid c9a7a9bb-c368-4d93-9c78-9f34f329fc94 devid 1 transid 3960 /dev/sda3
btrfs: device fsid c9a7a9bb-c368-4d93-9c78-9f34f329fc94 devid 1 transid 3960 /dev/sda3
btrfs: disk space caching is enabled
btrfs: device fsid c9a7a9bb-c368-4d93-9c78-9f34f329fc94 devid 1 transid 3960 /dev/sda3
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
Console: switching to colour frame buffer device 170x48
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:03:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
init: failsafe main process (603) killed by TERM signal
type=1400 audit(1404392312.738:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=691 comm="apparmor_parser"
type=1400 audit(1404392312.738:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=691 comm="apparmor_parser"
type=1400 audit(1404392312.738:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=691 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (695) killed by HUP signal
init: cups main process ended, respawning
type=1400 audit(1404392314.126:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=838 comm="apparmor_parser"
r8169 0000:04:00.0 eth18: link down
IPv6: ADDRCONF(NETDEV_UP): eth18: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth18: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan13: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan13: link is not ready
init: alsa-restore main process (945) terminated with status 99
audit_printk_skb: 150 callbacks suppressed
type=1400 audit(1404392342.814:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1841 comm="apparmor_parser"
type=1400 audit(1404392342.814:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1841 comm="apparmor_parser"
type=1400 audit(1404392342.814:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1841 comm="apparmor_parser"
systemd-hostnamed[1912]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan13: authenticate with 00:1d:7e:55:c6:47
wlan13: send auth to 00:1d:7e:55:c6:47 (try 1/3)
wlan13: authenticated
ath9k 0000:05:00.0 wlan13: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:05:00.0 wlan13: disabling VHT as WMM/QoS is not supported by the AP
wlan13: associate with 00:1d:7e:55:c6:47 (try 1/3)
wlan13: RX AssocResp from 00:1d:7e:55:c6:47 (capab=0x431 status=0 aid=1)
wlan13: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan13: link becomes ready
cfg80211: Calling CRDA for country: DE
ath: EEPROM regdomain: 0x8114
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: DE
ath: Regpair used: 0x37
ath: regdomain 0x8114 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
conftest[21725]: segfault at 0 ip 0804847b sp bff51350 error 4 in conftest[8048000+1000]
conftest[21754]: segfault at 0 ip b76395fb sp bff1587c error 4 in libc-2.19.so[b74ff000+1a9000]