dmesg - i5-2467m-compilation
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-29-generic (buildd@brownie) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #53-Ubuntu SMP Wed Jun 4 21:02:19 UTC 2014 (Ubuntu 3.13.0-29.53-generic 3.13.11.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a4570fff] usable
BIOS-e820: [mem 0x00000000a4571000-0x00000000a469bfff] reserved
BIOS-e820: [mem 0x00000000a469c000-0x00000000a6dbefff] usable
BIOS-e820: [mem 0x00000000a6dbf000-0x00000000a6ebefff] reserved
BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Acer Aspire S3/Aspire S3, BIOS 1.16 09/28/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x14fe00 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0A7000000 mask FFF000000 uncachable
3 base 0A8000000 mask FF8000000 uncachable
4 base 0B0000000 mask FF0000000 uncachable
5 base 0FFC00000 mask FFFC00000 write-protect
6 base 100000000 mask FC0000000 write-back
7 base 140000000 mask FF0000000 write-back
8 base 14FE00000 mask FFFE00000 uncachable
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b8c000, 0x01b8cfff] PGTABLE
RAMDISK: [mem 0x35baa000-0x36dccfff]
ACPI: RSDP 000fe020 000024 (v02 ACRSYS)
ACPI: XSDT a6ffe120 000094 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP a6ffc000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT a6fed000 00B218 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS a6f6c000 000040
ACPI: ASF! a6ffd000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET a6ffb000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC a6ffa000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG a6ff9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SLIC a6fec000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: WDAT a6feb000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT a6fe9000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: BOOT a6fe7000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASPT a6fe4000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM a6fe3000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT a6fe2000 000804 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT a6fe1000 000996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT a6fe0000 0000D0 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: Local APIC address 0xfee00000
4482MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b8d000, 0x01b8dfff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x4fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xa4570fff]
node 0: [mem 0xa469c000-0xa6dbefff]
node 0: [mem 0xa6fff000-0xa6ffffff]
node 0: [mem 0x00000000-0x4fdfffff]
On node 0 totalpages: 1010225
free_area_init_node: node 0, pgdat c1995100, node_mem_map f31aa020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3996 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 8965 pages used for memmap
HighMem zone: 781975 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7b7b000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1008441
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 11005944 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0014fe00)
Memory: 3954776K/4040900K available (6522K kernel code, 639K rwdata, 2756K rodata, 872K init, 924K bss, 86124K reserved, 3127896K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19b2000 - 0xc1a8c000 ( 872 kB)
.data : 0xc165ee72 - 0xc19b1d80 (3403 kB)
.text : 0xc1000000 - 0xc165ee72 (6523 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f2c0a000 soft=f2c0c000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1596.288 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.57 BogoMIPS (lpj=6385152)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (c1a8c000 - c1a94000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27749 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f2d30000 soft=f2d32000
x86: Booting SMP configuration:
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
CPU 2 irqstacks, hard=f2e0a000 soft=f2e0c000
Initializing CPU#2
CPU2: Thermal monitoring handled by SMI
#2
CPU 3 irqstacks, hard=f2e6e000 soft=f2e70000
Initializing CPU#3
CPU3: Thermal monitoring handled by SMI
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (12770.30 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:40:00, date: 06/30/14
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT a6e70798 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT a6e71a98 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT a6e6fd98 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc0504000-0xc050400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc0509000-0xc05093ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc0500000-0xc0503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc0508000-0xc05083ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc0507000-0xc05077ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc0505000-0xc05050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xc0400000-0xc047ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [mem 0xc0400000-0xc04fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xa4571000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa6dbf000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0x1010-0x1013] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: [mem 0xfe800000-0xfe80ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs ETD0504 PNP0f0b PNP0f12 PNP0f03 PNP0f0e PNP0f13 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xafb00000-0xafbfffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: BAR 6: assigned [mem 0xafb00000-0xafb0ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [mem 0xc0400000-0xc04fffff]
pci 0000:00:1c.5: bridge window [mem 0xafb00000-0xafbfffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xc0400000-0xc04fffff]
pci_bus 0000:02: resource 2 [mem 0xafb00000-0xafbfffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18572K (f5baa000 - f6dcd000)
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1404124800.780:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1651
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: AC Adapter [ADP1] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (58 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (39 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0509000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-29-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0508000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-29-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 497ec33ede6aa573c29cd85a3d778ac2aeb3d36f'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:447:680
rtc_cmos 00:05: setting system clock to 2014-06-30 10:40:01 UTC (1404124801)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
isapnp: No Plug & Play device found
Freeing unused kernel memory: 872K (c19b2000 - c1a8c000)
Write protecting the kernel text: 6524k
Write protecting the kernel read-only data: 2764k
NX-protecting the kernel data: 5764k
systemd-udevd[107]: starting version 204
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc0507000 port 0xc0507100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xc0507000 port 0xc0507180 irq 40
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xc0507000 port 0xc0507280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xc0507000 port 0xc0507300 irq 40
ata6: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA600, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1.5: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 1596.389 MHz
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SATA SSD, S5FAM011, max UDMA/100
ata2.00: 39091248 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA SATA SSD S5FA PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 39091248 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.5: New USB device found, idVendor=064e, idProduct=c321
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.5: Product: 1.3M HD WebCam
usb 1-1.5: Manufacturer: SuYin
usb 1-1.5: SerialNumber: HF1318-P88B-SN03-VA-R01.00.02
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00)
psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x13, 0x0e.
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-1.2: new high-speed USB device number 3 using ehci-pci
usb 2-1.2: New USB device found, idVendor=152d, idProduct=2509
usb 2-1.2: New USB device strings: Mfr=1, Product=11, SerialNumber=3
usb 2-1.2: Product: Usb production
usb 2-1.2: Manufacturer: JMicron
usb 2-1.2: SerialNumber: 0012345667888
usb-storage 2-1.2:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-1.2:1.0
usbcore: registered new interface driver usb-storage
usb 2-1.6: new high-speed USB device number 4 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0129
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: USB2.0-CRW
usb 2-1.6: Manufacturer: Generic
usb 2-1.6: SerialNumber: 20100201396000000
Switched to clocksource tsc
scsi 6:0:0:0: Direct-Access Disk Name 8909 PQ: 0 ANSI: 2 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 28 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2 sdc3
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI disk
raid6: mmxx1 3765 MB/s
raid6: mmxx2 4022 MB/s
raid6: sse1x1 3165 MB/s
raid6: sse1x2 3789 MB/s
raid6: sse2x1 6344 MB/s
raid6: sse2x2 7708 MB/s
raid6: using algorithm sse2x2 (7708 MB/s)
raid6: using ssse3x1 recovery algorithm
xor: automatically using best checksumming function:
avx : 16875.000 MB/sec
bio: create slab at 1
Btrfs loaded
random: nonblocking pool is initialized
btrfs: device fsid c9a7a9bb-c368-4d93-9c78-9f34f329fc94 devid 1 transid 3781 /dev/sdc3
btrfs: disk space caching is enabled
Adding 3999740k swap on /dev/sdc2. Priority:-1 extents:1 across:3999740k FS
systemd-udevd[314]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
fbcon: inteldrmfb (fb0) is primary device
cfg80211: Calling CRDA to update world regulatory domain
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Brightness must be controlled by acpi video driver
input: Acer WMI hotkeys as /devices/virtual/input/input6
input: Acer BMA150 accelerometer as /devices/virtual/input/input7
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
rts5139: module is from the staging directory, the quality is unknown, you have been warned.
scsi7 : SCSI emulation for RTS5139 USB card reader
scsi 7:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg3 type 0
usbcore: registered new interface driver rts5139
Linux video capture interface: v2.00
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf9500000, irq=17
sd 7:0:0:0: [sdd] Attached SCSI removable disk
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:34: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
systemd-udevd[363]: renamed network interface wlan0 to wlan12
SKU: Nid=0x1d sku_cfg=0x4007992d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x00000099
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x12
realtek: No valid SSID, checking pincfg 0x4007992d for NID 0x1d
realtek: Enabling init ASM_ID=0x992d CODEC_ID=10ec0269
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:c321)
input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
type=1400 audit(1404124814.460:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=508 comm="apparmor_parser"
type=1400 audit(1404124814.460:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
type=1400 audit(1404124814.460:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
type=1400 audit(1404124814.460:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=432 comm="apparmor_parser"
type=1400 audit(1404124814.460:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser"
type=1400 audit(1404124814.460:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser"
type=1400 audit(1404124814.460:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
type=1400 audit(1404124814.460:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
type=1400 audit(1404124814.460:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser"
type=1400 audit(1404124814.460:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser"
btrfs: disk space caching is enabled
btrfs: device fsid c9a7a9bb-c368-4d93-9c78-9f34f329fc94 devid 1 transid 3781 /dev/sdc3
EXT4-fs (sdc1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem without journal. Opts: (null)
init: failsafe main process (661) killed by TERM signal
btrfs: device fsid c9a7a9bb-c368-4d93-9c78-9f34f329fc94 devid 1 transid 3781 /dev/sdc3
btrfs: device fsid c9a7a9bb-c368-4d93-9c78-9f34f329fc94 devid 1 transid 3781 /dev/sdc3
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (781) killed by HUP signal
init: cups main process ended, respawning
audit_printk_skb: 15 callbacks suppressed
type=1400 audit(1404124821.424:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=844 comm="apparmor_parser"
type=1400 audit(1404124821.424:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=844 comm="apparmor_parser"
type=1400 audit(1404124821.424:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
type=1400 audit(1404124821.424:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=844 comm="apparmor_parser"
type=1400 audit(1404124821.424:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
type=1400 audit(1404124821.424:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
type=1400 audit(1404124821.648:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=843 comm="apparmor_parser"
type=1400 audit(1404124821.648:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=843 comm="apparmor_parser"
type=1400 audit(1404124821.648:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=843 comm="apparmor_parser"
type=1400 audit(1404124821.656:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=851 comm="apparmor_parser"
init: alsa-restore main process (993) terminated with status 99
IPv6: ADDRCONF(NETDEV_UP): wlan12: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan12: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1175) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 123 callbacks suppressed
type=1400 audit(1404124849.468:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1887 comm="apparmor_parser"
type=1400 audit(1404124849.468:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1887 comm="apparmor_parser"
type=1400 audit(1404124849.468:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1887 comm="apparmor_parser"
systemd-hostnamed[2003]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan12: authenticate with 00:1d:7e:55:c6:47
wlan12: send auth to 00:1d:7e:55:c6:47 (try 1/3)
wlan12: authenticated
ath9k 0000:02:00.0 wlan12: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan12: disabling VHT as WMM/QoS is not supported by the AP
wlan12: associate with 00:1d:7e:55:c6:47 (try 1/3)
wlan12: RX AssocResp from 00:1d:7e:55:c6:47 (capab=0x431 status=0 aid=1)
wlan12: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan12: link becomes ready
cfg80211: Calling CRDA for country: DE
ath: EEPROM regdomain: 0x8114
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: DE
ath: Regpair used: 0x37
ath: regdomain 0x8114 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
type=1400 audit(1404118589.547:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=24974 comm="apparmor_parser"
type=1400 audit(1404118589.547:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=24974 comm="apparmor_parser"
type=1400 audit(1404118589.547:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=24974 comm="apparmor_parser"
perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
conftest[21015]: segfault at 0 ip 0804847b sp bf889f90 error 4 in conftest[8048000+1000]
conftest[21044]: segfault at 0 ip b76c95fb sp bfb03f0c error 4 in libc-2.19.so[b758f000+1a9000]