dmesg - 41A
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-30-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #54-Ubuntu SMP Mon Jun 9 22:45:01 UTC 2014 (Ubuntu 3.13.0-30.54-generic 3.13.11.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
BIOS-e820: [mem 0x00000000cff90000-0x00000000cffa7fff] ACPI data
BIOS-e820: [mem 0x00000000cffa8000-0x00000000cffcffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4A88TD-V EVO/USB3, BIOS 1015 03/31/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[mem 0x21fe00000-0x21fffffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
[mem 0x21c000000-0x21fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcff8ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcff8ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x34b98000-0x365c3fff]
ACPI: RSDP 00000000000fbb80 000024 (v02 ACPIAM)
ACPI: XSDT 00000000cff90100 00005C (v01 033110 XSDT1021 20100331 MSFT 00000097)
ACPI: FACP 00000000cff90290 0000F4 (v03 033110 FACP1021 20100331 MSFT 00000097)
ACPI: DSDT 00000000cff90450 00F213 (v01 A1638 A1638001 00000001 INTL 20060113)
ACPI: FACS 00000000cffa8000 000040
ACPI: APIC 00000000cff90390 00007C (v01 033110 APIC1021 20100331 MSFT 00000097)
ACPI: MCFG 00000000cff90410 00003C (v01 033110 OEMMCFG 20100331 MSFT 00000097)
ACPI: OEMB 00000000cffa8040 000072 (v01 033110 OEMB1021 20100331 MSFT 00000097)
ACPI: SRAT 00000000cff9f8a0 0000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000cff9f990 000038 (v01 033110 OEMHPET 20100331 MSFT 00000097)
ACPI: SSDT 00000000cff9f9d0 00088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x21fffffff] -> [mem 0x00000000-0x21fffffff]
Initmem setup node 0 [mem 0x00000000-0x21fffffff]
NODE_DATA [mem 0x21fff9000-0x21fffdfff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217a00000-ffff88021f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xcff8ffff]
node 0: [mem 0x100000000-0x21fffffff]
On node 0 totalpages: 2031405
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13247 pages used for memmap
DMA32 zone: 847760 pages, LIFO batch:31
Normal zone: 18432 pages used for memmap
Normal zone: 1179648 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
PM: Registered nosave memory: [mem 0xcff90000-0xcffa7fff]
PM: Registered nosave memory: [mem 0xcffa8000-0xcffcffff]
PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0xd0000000-0xff9fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88021fc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999641
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 8d0a000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 7822928K/8125620K available (7356K kernel code, 1142K rwdata, 3396K rodata, 1332K init, 1440K bss, 302692K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-5.
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 32505856 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3415.327 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.65 BogoMIPS (lpj=13661308)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6c000 - ffffffff81e74000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28465 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 965 Processor (fam: 10, model: 04, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27322.61 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcffa8000-0xcffcffff] (163840 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:16:38, date: 06/28/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe5fffff]
node 0 link 0: mmio [fe600000, fe7fffff]
node 0 link 0: mmio [fe800000, ffdfffff]
TOM2: 0000000230000000 aka 8960M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x230000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe5ffc00-0xfe5fffff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe5fe000-0xfe5fefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe5ff800-0xfe5ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe5fd000-0xfe5fdfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe5ff400-0xfe5ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe5f8000-0xfe5fbfff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe5fc000-0xfe5fcfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe5f7000-0xfe5f7fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe5ff000-0xfe5ff0ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:05.0: [1002:9715] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 0x14: [io 0xc000-0xc0ff]
pci 0000:01:05.0: reg 0x18: [mem 0xfe7f0000-0xfe7fffff]
pci 0000:01:05.0: reg 0x24: [mem 0xfe600000-0xfe6fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
pci 0000:01:05.1: reg 0x10: [mem 0xfe7e8000-0xfe7ebfff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:02:00.0: reg 0x10: [mem 0xfe8ff800-0xfe8fffff 64bit]
pci 0000:02:00.0: reg 0x18: [io 0xd800-0xd8ff]
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
pci 0000:02:00.1: [1106:0415] type 00 class 0x010185
pci 0000:02:00.1: reg 0x10: [io 0xdc00-0xdc07]
pci 0000:02:00.1: reg 0x14: [io 0xd480-0xd483]
pci 0000:02:00.1: reg 0x18: [io 0xd400-0xd407]
pci 0000:02:00.1: reg 0x1c: [io 0xd080-0xd083]
pci 0000:02:00.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:02:00.1: reg 0x30: [mem 0xfe8e0000-0xfe8effff pref]
pci 0000:02:00.1: supports D2
pci 0000:02:00.1: PME# supported from D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe9fe000-0xfe9fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:04:06.0: [11c1:5811] type 00 class 0x0c0010
pci 0000:04:06.0: reg 0x10: [mem 0xfeaff000-0xfeafffff]
pci 0000:04:06.0: supports D1 D2
pci 0000:04:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:04:07.0: [109e:036e] type 00 class 0x040000
pci 0000:04:07.0: reg 0x10: [mem 0xfdeff000-0xfdefffff pref]
pci 0000:04:07.1: [109e:0878] type 00 class 0x048000
pci 0000:04:07.1: reg 0x10: [mem 0xfdefe000-0xfdefefff pref]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:06:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:06:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:06:00.0: reg 0x30: [mem 0xfebf0000-0xfebfffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0b00-0x0b3f] has been reserved
system 00:08: [io 0x0800-0x089f] could not be reserved
system 00:08: [io 0x0b00-0x0b1f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x0230-0x023f] has been reserved
system 00:09: [io 0x0290-0x029f] has been reserved
system 00:09: [io 0x0300-0x030f] has been reserved
system 00:09: [io 0x0a30-0x0a3f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:06: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26800K (ffff880034b98000 - ffff8800365c4000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000b6
microcode: CPU1: patch_level=0x010000b6
microcode: CPU2: patch_level=0x010000b6
microcode: CPU3: patch_level=0x010000b6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1403950598.924:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15460
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe5ff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe5ff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe5ff000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe5fe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe5fd000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe5fc000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfe5f7000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-30-generic xhci_hcd
usb usb8: SerialNumber: 0000:03:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-30-generic xhci_hcd
usb usb9: SerialNumber: 0000:03:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: ac244bd3595520e48dacc7db4a170331cc248d65'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:882:275
tty tty12: hash matches
rtc_cmos 00:02: setting system clock to 2014-06-28 10:16:40 UTC (1403950600)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1f000 - ffffffff81e6c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 824K (ffff880001732000 - ffff880001800000)
Freeing unused kernel memory: 700K (ffff880001b51000 - ffff880001c00000)
systemd-udevd[120]: starting version 204
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
pata_via 0000:02:00.1: version 0.3.4
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0xdc00 ctl 0xd480 bmdma 0xd000 irq 17
ata2: PATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 17
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 47 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 47
ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 47
ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 47
ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 47
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:06:00.0: irq 48 for MSI/MSI-X
r8169 0000:06:00.0 eth0: RTL8168e/8111e at 0xffffc90010c8a000, 48:5b:39:ca:da:08, XID 0c100000 IRQ 48
r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 1-4: new high-speed USB device number 2 using ehci-pci
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E).
[drm] register mmio base: 0xFE7F0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=368M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 3959284 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 368M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RS780 Microcode
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff88020ecf3c00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff88020ecf3c0c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
firewire_ohci 0000:02:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
firewire_ohci 0000:04:06.0: added OHCI v1.0 device as card 1, 8 IR + 8 IT contexts, quirks 0x0
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0
ata7.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
ata7.00: limited to UDMA/33 due to 40-wire cable
ata7.00: configured for UDMA/33
usb 1-4: New USB device found, idVendor=0ac8, idProduct=3610
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Proxima USB2.0 Camera
usb 1-4: Manufacturer: Vimicr0 Corp.
tsc: Refined TSC clocksource calibration: 3415.186 MHz
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 2-5: new high-speed USB device number 3 using ehci-pci
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-7: WDC WD2500JS-60NCB1, 10.02E02, max UDMA/100
ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/100
ata3.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD2500JS-60N 10.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg2 type 5
sdb: sdb1 sdb2 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
firewire_core 0000:02:00.0: created device fw0: GUID 001e8c00003245ba, S400
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
sd 2:0:0:0: [sda] Attached SCSI disk
firewire_core 0000:04:06.0: created device fw1: GUID 0000010000000658, S400
Switched to clocksource tsc
usb 2-5: New USB device found, idVendor=0bda, idProduct=0158
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: USB2.0-CRW
usb 2-5: Manufacturer: Generic
usb 2-5: SerialNumber: 20060413092100000
usbcore: registered new interface driver usb-storage
ums-realtek 2-5:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-5:1.0
usbcore: registered new interface driver ums-realtek
random: nonblocking pool is initialized
usb 5-1: new low-speed USB device number 2 using ohci-pci
usb 5-1: New USB device found, idVendor=046d, idProduct=c512
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Receiver
usb 5-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input5
logitech 0003:046D:C512.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input6
logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1/input1
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
Adding 4194300k swap on /dev/sda6. Priority:-1 extents:1 across:4194300k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[342]: starting version 204
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
MCE: In-kernel MCE decoding enabled.
type=1400 audit(1403943410.092:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=445 comm="apparmor_parser"
type=1400 audit(1403943410.092:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=445 comm="apparmor_parser"
type=1400 audit(1403943410.092:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=445 comm="apparmor_parser"
type=1400 audit(1403943410.092:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=445 comm="apparmor_parser"
type=1400 audit(1403943410.092:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=445 comm="apparmor_parser"
type=1400 audit(1403943410.092:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=445 comm="apparmor_parser"
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Linux video capture interface: v2.00
EDAC MC: Ver: 3.0.0
type=1400 audit(1403943410.140:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=460 comm="apparmor_parser"
type=1400 audit(1403943410.140:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=460 comm="apparmor_parser"
type=1400 audit(1403943410.140:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=460 comm="apparmor_parser"
type=1400 audit(1403943410.144:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=460 comm="apparmor_parser"
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x41
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90010c84b00). heartbeat=60 sec (nowayout=0)
lp: driver loaded but no devices found
it87: Found IT8721F chip at 0x290, revision 3
ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.ECRE 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
ppdev: user-space parallel port driver
bttv: driver version 0.9.19 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0)
bttv: 0: Bt878 (rev 17) at 0000:04:07.0, irq: 22, latency: 64, mmio: 0xfdeff000
bttv: 0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
bttv: 0: using: Pinnacle PCTV Sat [card=94,autodetected]
bttv: 0: tuner absent
bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
bttv: PLL set ok
bttv: 0: registered device video0
bttv: 0: registered device vbi0
bttv: 0: add subdevice "dvb0"
uvcvideo: Found UVC 1.00 device Proxima USB2.0 Camera (0ac8:3610)
input: Proxima USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878_probe: card id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions.
bt878(0): Bt878 (rev 17) at 04:07.1, irq: 22, latency: 64, memory: 0xfdefe000
DVB: registering new adapter (bttv0)
bt878 0000:04:07.1: DVB: registering adapter 0 frontend 0 (Conexant CX24110 DVB-S)...
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
hda-intel 0000:01:05.1: Using LPIB position fix
hda-intel 0000:01:05.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input14
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (799) killed by TERM signal
init: cups main process (947) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit_printk_skb: 120 callbacks suppressed
type=1400 audit(1403943415.632:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1130 comm="apparmor_parser"
r8169 0000:06:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: samba-ad-dc main process (1200) terminated with status 1
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x42c offMax=0x3370
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.12 (interface 0x001a0007).
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1238) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (1314) terminated with status 1
type=1400 audit(1403943445.024:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1659 comm="apparmor_parser"
type=1400 audit(1403943445.024:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1659 comm="apparmor_parser"
type=1400 audit(1403943445.024:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1659 comm="apparmor_parser"
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
r8169 0000:06:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 2-5: reset high-speed USB device number 3 using ehci-pci
r8169 0000:06:00.0 eth0: link down
r8169 0000:06:00.0 eth0: link up
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through
usb 2-5: reset high-speed USB device number 3 using ehci-pci
sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdc] Asking for cache data failed
sd 8:0:0:0: [sdc] Assuming drive cache: write through