dmesg - cairo-uxa

Return To cairo-uxa System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.13 (root@localhost.localdomain) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Thu Apr 3 07:47:10 EDT 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x00000000b716afff] usable
BIOS-e820: [mem 0x00000000b716b000-0x00000000b776afff] reserved
BIOS-e820: [mem 0x00000000b776b000-0x00000000b786afff] ACPI NVS
BIOS-e820: [mem 0x00000000b786b000-0x00000000b78aafff] ACPI data
BIOS-e820: [mem 0x00000000b78ab000-0x00000000b7ffffff] usable
BIOS-e820: [mem 0x00000000ba000000-0x00000000ba7fffff] reserved
BIOS-e820: [mem 0x00000000bae00000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
SMBIOS 2.7 present.
DMI: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS BYTICRB1.86C.0080.R20.1403251108 03/25/2014
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xb8000 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0FF800000 mask FFF800000 write-protect
  1 base 000000000 mask F80000000 write-back
  2 base 080000000 mask FC0000000 write-back
  3 base 0BC000000 mask FFC000000 uncachable
  4 base 0BB000000 mask FFF000000 uncachable
  5 base 0BAE00000 mask FFFE00000 uncachable
  6 base 100000000 mask FC0000000 write-back
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fde50-0x000fde5f] mapped at [c00fde50]
initial memory mapped: [mem 0x00000000-0x00ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x373fdfff]
 [mem 0x00000000-0x003fffff] page 4k
 [mem 0x00400000-0x36ffffff] page 2M
 [mem 0x37000000-0x373fdfff] page 4k
kernel direct mapping tables up to 0x373fdfff @ [mem 0x00ff7000-0x00ffffff]
RAMDISK: [mem 0x35d34000-0x36e91fff]
ACPI: RSDP 000f0410 00024 (v02 INTEL )
ACPI: XSDT b78a90e8 0008C (v01 INTEL  EDK2     00000003 VLV2 01000013)
ACPI: FACP b78a7000 0010C (v05 INTEL  EDK2     00000003 VLV2 0100000D)
ACPI: DSDT b7897000 0B891 (v02 INTEL  EDK2     00000003 VLV2 0100000D)
ACPI: FACS b77ef000 00040
ACPI: SSDT b78a8000 000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120518)
ACPI: UEFI b77f7000 00042 (v01                 00000000      00000000)
ACPI: HPET b78a6000 00038 (v01 INTEL  EDK2     00000003 VLV2 0100000D)
ACPI: LPIT b78a5000 00104 (v01 INTEL  EDK2     00000003 VLV2 0100000D)
ACPI: APIC b78a4000 00084 (v03 INTEL  EDK2     00000003 VLV2 0100000D)
ACPI: MCFG b78a3000 0003C (v01 INTEL  EDK2     00000003 VLV2 0100000D)
ACPI: SSDT b7891000 00763 (v01  PmRef    CpuPm 00003000 INTL 20120518)
ACPI: SSDT b7890000 00290 (v01  PmRef  Cpu0Tst 00003000 INTL 20120518)
ACPI: SSDT b788f000 0017A (v01  PmRef    ApTst 00003000 INTL 20120518)
ACPI: SSDT b788e000 003E6 (v01 Intel_ IsctTabl 00001000 INTL 20120518)
ACPI: FPDT b788d000 00044 (v01  INTEL EDK2     00000003 VLV2 0100000D)
ACPI: CSRT b788c000 0014C (v00 INTEL  EDK2     00000005 INTL 20120624)
ACPI: Local APIC address 0xfee00000
2060MB HIGHMEM available.
883MB LOWMEM available.
  mapped low ram: 0 - 373fe000
  low ram: 0 - 373fe000
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  Normal   [mem 0x01000000-0x373fdfff]
  HighMem  [mem 0x373fe000-0xb7ffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009cfff]
  node   0: [mem 0x00100000-0x1fffffff]
  node   0: [mem 0x20100000-0xb716afff]
  node   0: [mem 0xb78ab000-0xb7ffffff]
On node 0 totalpages: 751437
free_area_init_node: node 0, pgdat c0c251c0, node_mem_map f4634200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3949 pages, LIFO batch:0
  Normal zone: 1736 pages used for memmap
  Normal zone: 220214 pages, LIFO batch:31
  HighMem zone: 4121 pages used for memmap
  HighMem zone: 521385 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020100000
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f73b7000 s32448 r0 d20800 u53248
pcpu-alloc: s32448 r0 d20800 u53248 alloc=13*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 745548
Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.13 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.luks=0 vconsole.keymap=us rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8 KEYTABLE=us vga=787
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 6029184 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:000b8000)
Memory: 2947336k/3014656k available (5657k kernel code, 58412k reserved, 2762k data, 644k init, 2102024k highmem)
virtual kernel memory layout:
    fixmap  : 0xffa95000 - 0xfffff000   (5544 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
      .init : 0xc0c3a000 - 0xc0cdb000   ( 644 kB)
      .data : 0xc0986745 - 0xc0c39080   (2762 kB)
      .text : 0xc0400000 - 0xc0986745   (5657 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:1024 16
CPU 0 irqstacks, hard=f3c0c000 soft=f3c0e000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1750.070 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3500.14 BogoMIPS (lpj=1750070)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 23524 entries in 46 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) CPU  E3827  @ 1.74GHz (fam: 06, model: 37, stepping: 03)
TSC deadline timer enabled
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU 1 irqstacks, hard=f3d06000 soft=f3d08000
Initializing CPU#1
smpboot: Booting Node   0, Processors  #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (7000.28 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xb776b000-0xb786afff] (1048576 bytes)
atomic64 test passed for i586+ platform with CX8 and with SSE
RTC time: 21:04:41, date: 01/20/01
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT b7763a90 00353 (v01  PmRef  Cpu0Ist 00003000 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00353 (v01  PmRef  Cpu0Ist 00003000 INTL 20120518)
ACPI: SSDT b7762910 00433 (v01  PmRef  Cpu0Cst 00003001 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00433 (v01  PmRef  Cpu0Cst 00003001 INTL 20120518)
ACPI: SSDT b7764d90 0015F (v01  PmRef    ApIst 00003000 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0015F (v01  PmRef    ApIst 00003000 INTL 20120518)
ACPI: SSDT b7764f10 0008D (v01  PmRef    ApCst 00003000 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20120518)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [FN00] (off)
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
_OSC request data:1 8 0 
pci_root PNP0A08:00: host bridge window expanded to [mem 0xc0000000-0xd06ffffe]; [mem 0xc0000000-0xd06ffffe] ignored
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd06ffffe]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff]
pci 0000:00:02.0: reg 18: [mem 0xc8000000-0xcfffffff pref]
pci 0000:00:02.0: reg 20: [io  0x1050-0x1057]
pci 0000:00:11.0: [8086:0f15] type 00 class 0x080501
pci 0000:00:11.0: reg 10: [mem 0xd062e000-0xd062efff]
pci 0000:00:11.0: reg 14: [mem 0xd062d000-0xd062dfff]
pci 0000:00:11.0: PME# supported from D0 D3hot
pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
pci 0000:00:12.0: reg 10: [mem 0xd062c000-0xd062cfff]
pci 0000:00:12.0: reg 14: [mem 0xd062b000-0xd062bfff]
pci 0000:00:12.0: PME# supported from D0 D3hot
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 10: [io  0x1048-0x104f]
pci 0000:00:13.0: reg 14: [io  0x105c-0x105f]
pci 0000:00:13.0: reg 18: [io  0x1040-0x1047]
pci 0000:00:13.0: reg 1c: [io  0x1058-0x105b]
pci 0000:00:13.0: reg 20: [io  0x1020-0x103f]
pci 0000:00:13.0: reg 24: [mem 0xd062a000-0xd062a7ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:0f50] type 00 class 0x080501
pci 0000:00:17.0: reg 10: [mem 0xd0629000-0xd0629fff]
pci 0000:00:17.0: reg 14: [mem 0xd0628000-0xd0628fff]
pci 0000:00:17.0: PME# supported from D0 D3hot
pci 0000:00:18.0: [8086:0f40] type 00 class 0x080102
pci 0000:00:18.0: reg 10: [mem 0xd0608000-0xd060bfff]
pci 0000:00:18.0: reg 14: [mem 0xd0627000-0xd0627fff]
pci 0000:00:18.1: [8086:0f41] type 00 class 0x0c8000
pci 0000:00:18.1: reg 10: [mem 0xd0626000-0xd0626fff]
pci 0000:00:18.1: reg 14: [mem 0xd0625000-0xd0625fff]
pci 0000:00:18.2: [8086:0f42] type 00 class 0x0c8000
pci 0000:00:18.2: reg 10: [mem 0xd0624000-0xd0624fff]
pci 0000:00:18.2: reg 14: [mem 0xd0623000-0xd0623fff]
pci 0000:00:18.3: [8086:0f43] type 00 class 0x0c8000
pci 0000:00:18.3: reg 10: [mem 0xd0622000-0xd0622fff]
pci 0000:00:18.3: reg 14: [mem 0xd0621000-0xd0621fff]
pci 0000:00:18.4: [8086:0f44] type 00 class 0x0c8000
pci 0000:00:18.4: reg 10: [mem 0xd0620000-0xd0620fff]
pci 0000:00:18.4: reg 14: [mem 0xd061f000-0xd061ffff]
pci 0000:00:18.5: [8086:0f45] type 00 class 0x0c8000
pci 0000:00:18.5: reg 10: [mem 0xd061e000-0xd061efff]
pci 0000:00:18.5: reg 14: [mem 0xd061d000-0xd061dfff]
pci 0000:00:18.6: [8086:0f46] type 00 class 0x0c8000
pci 0000:00:18.6: reg 10: [mem 0xd061c000-0xd061cfff]
pci 0000:00:18.6: reg 14: [mem 0xd061b000-0xd061bfff]
pci 0000:00:18.7: [8086:0f47] type 00 class 0x0c8000
pci 0000:00:18.7: reg 10: [mem 0xd061a000-0xd061afff]
pci 0000:00:18.7: reg 14: [mem 0xd0619000-0xd0619fff]
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 10: [mem 0xd0500000-0xd05fffff]
pci 0000:00:1a.0: reg 14: [mem 0xd0400000-0xd04fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xd0600000-0xd0603fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xd0618000-0xd06183ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:0f06] type 00 class 0x080102
pci 0000:00:1e.0: reg 10: [mem 0xd0604000-0xd0607fff]
pci 0000:00:1e.0: reg 14: [mem 0xd0617000-0xd0617fff]
pci 0000:00:1e.1: [8086:0f08] type 00 class 0x0c8000
pci 0000:00:1e.1: reg 10: [mem 0xd0616000-0xd0616fff]
pci 0000:00:1e.1: reg 14: [mem 0xd0615000-0xd0615fff]
pci 0000:00:1e.2: [8086:0f09] type 00 class 0x0c8000
pci 0000:00:1e.2: reg 10: [mem 0xd0614000-0xd0614fff]
pci 0000:00:1e.2: reg 14: [mem 0xd0613000-0xd0613fff]
pci 0000:00:1e.3: [8086:0f0a] type 00 class 0x078000
pci 0000:00:1e.3: reg 10: [mem 0xd0612000-0xd0612fff]
pci 0000:00:1e.3: reg 14: [mem 0xd0611000-0xd0611fff]
pci 0000:00:1e.4: [8086:0f0c] type 00 class 0x078000
pci 0000:00:1e.4: reg 10: [mem 0xd0610000-0xd0610fff]
pci 0000:00:1e.4: reg 14: [mem 0xd060f000-0xd060ffff]
pci 0000:00:1e.5: [8086:0f0e] type 00 class 0x0c8000
pci 0000:00:1e.5: reg 10: [mem 0xd060e000-0xd060efff]
pci 0000:00:1e.5: reg 14: [mem 0xd060d000-0xd060dfff]
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xd060c000-0xd060c01f]
pci 0000:00:1f.3: reg 20: [io  0x1000-0x101f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
_OSC request data:1 1f 0 
 pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb716b000-0xb7ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
ACPI: IRQ 8 override to level, high
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
system 00:03: [io  0x0680-0x069f] has been reserved
system 00:03: [io  0x0400-0x047f] has been reserved
system 00:03: [io  0x0500-0x05fe] has been reserved
system 00:03: [io  0x0600-0x061f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:07: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT33b2 (active)
pnp 00:09: Plug and Play ACPI device, IDs INT33b2 (active)
pnp 00:0a: Plug and Play ACPI device, IDs INT33b2 (active)
pnp 00:0b: Plug and Play ACPI device, IDs INT33bd (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0400000-0xc05fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0800000-0xc09fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0c00000-0xc0dfffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0e00000-0xc0ffffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
pci 0000:00:1c.2: BAR 13: assigned [io  0x4000-0x4fff]
pci 0000:00:1c.3: BAR 13: assigned [io  0x5000-0x5fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff]
pci 0000:00:1c.1:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xc0800000-0xc09fffff]
pci 0000:00:1c.2:   bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.3:   bridge window [mem 0xc0c00000-0xc0dfffff]
pci 0000:00:1c.3:   bridge window [mem 0xc0e00000-0xc0ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x006f]
pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd06ffffe]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc0400000-0xc05fffff]
pci_bus 0000:02: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xc0800000-0xc09fffff]
pci_bus 0000:03: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xc0c00000-0xc0dfffff]
pci_bus 0000:04: resource 2 [mem 0xc0e00000-0xc0ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17784k freed
apm: BIOS not found.
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(980024682.625:1): initialized
bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1685
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: does not run on family 6 model 55
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery absent)
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: irq 103 for MSI/MSI-X
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds 
ahci 0000:00:13.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd062a000 port 0xd062a100 irq 103
ata2: DUMMY
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0618000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.13 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
X.509: Cert 18999bd24a8ff8977bc003e9c5a60f30ff504cc0 is not yet valid
MODSIGN: Problem loading in-kernel X.509 certificate (-129)
registered taskstats version 1
  Magic number: 1:213:96
rtc_cmos 00:00: setting system clock to 2001-01-20 21:04:43 UTC (980024683)
atkbd serio0: Failed to enable keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=07e6
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 1749.999 MHz
Switching to clocksource tsc
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: Mass Storage
usb 1-1.1: Manufacturer: Generic
usb 1-1.1: SerialNumber: 0B82D627
usb 1-1.2: new high-speed USB device number 4 using ehci-pci
usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101
usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.2: Product: USB 2.0 Hub
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
usb 1-1.2.1: new low-speed USB device number 5 using ehci-pci
usb 1-1.2.1: New USB device found, idVendor=046d, idProduct=c31c
usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.1: Product: USB Keyboard
usb 1-1.2.1: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input5
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2.1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input6
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2.1/input1
usb 1-1.2.3: new low-speed USB device number 6 using ehci-pci
usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c05a
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: USB Optical Mouse
usb 1-1.2.3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input7
hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.3/input0
usb 1-1.2.4: new high-speed USB device number 7 using ehci-pci
usb 1-1.2.4: New USB device found, idVendor=0b95, idProduct=772a
usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.4: Product: AX88x72A
usb 1-1.2.4: Manufacturer: ASIX Elec. Corp.
usb 1-1.2.4: SerialNumber: 000002
ACPI: Battery Slot [BAT1] (battery present)
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 644k freed
Write protecting the kernel text: 5660k
Write protecting the kernel read-only data: 2232k
systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; fedora)
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
systemd-udevd[133]: starting version 195
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Disabling lock debugging due to kernel taint
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
sdhci-pci 0000:00:11.0: SDHCI controller found [8086:0f15] (rev c)
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
sdhci-pci 0000:00:11.0: setting latency timer to 64
sdhci-pci 0000:00:11.0: setting latency timer to 64
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
mmc0: SDHCI controller on PCI [0000:00:11.0] using ADMA
sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev c)
sdhci-pci 0000:00:12.0: setting latency timer to 64
sdhci-pci 0000:00:12.0: setting latency timer to 64
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-1.1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mmc1: SDHCI controller on PCI [0000:00:12.0] using ADMA
sdhci-pci 0000:00:17.0: SDHCI controller found [8086:0f50] (rev c)
sdhci-pci 0000:00:17.0: setting latency timer to 64
sdhci-pci 0000:00:17.0: setting latency timer to 64
sdhci-pci 0000:00:11.0: setting latency timer to 64
mmc2: SDHCI controller on PCI [0000:00:17.0] using ADMA
sdhci-pci 0000:00:11.0: setting latency timer to 64
sdhci-pci 0000:00:11.0: setting latency timer to 64
sdhci-pci 0000:00:11.0: setting latency timer to 64
sdhci-pci 0000:00:12.0: setting latency timer to 64
sdhci-pci 0000:00:12.0: setting latency timer to 64
sdhci-pci 0000:00:12.0: setting latency timer to 64
sdhci-pci 0000:00:12.0: setting latency timer to 64
sdhci-pci 0000:00:17.0: setting latency timer to 64
bio: create slab  at 1
sdhci-pci 0000:00:17.0: setting latency timer to 64
sdhci-pci 0000:00:17.0: setting latency timer to 64
sdhci-pci 0000:00:17.0: setting latency timer to 64
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
scsi 2:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 16396288 512-byte logical blocks: (8.39 GB/7.81 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[74]: Received SIGTERM
type=1404 audit(980024690.834:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 93843 rules.
SELinux: 2048 avtab hash slots, 93843 rules.
SELinux:  9 users, 15 roles, 4356 types, 237 bools, 1 sens, 1024 cats
SELinux:  83 classes, 93843 rules
SELinux:  Permission attach_queue in class tun_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev dm-1, type ext4), uses xattr
type=1403 audit(980024691.597:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 808.036ms.
systemd[1]: Relabelled /dev and /run in 69.232ms.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
EXT4-fs (dm-1): re-mounted. Opts: (null)
systemd-udevd[318]: starting version 201
systemd-journald[326]: Vacuuming done, freed 0 bytes
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
input: PC Speaker as /devices/platform/pcspkr/input/input8
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
microcode: CPU0 sig=0x30673, pf=0x1, revision=0x321
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
microcode: CPU1 sig=0x30673, pf=0x1, revision=0x321
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
snd_hda_intel 0000:00:1b.0: irq 104 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
ALSA sound/pci/hda/patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x4014c601
ALSA sound/pci/hda/patch_realtek.c:1243 SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1244 SKU: enable_pcbeep=0x1
ALSA sound/pci/hda/patch_realtek.c:1245 SKU: check_sum=0x00000004
ALSA sound/pci/hda/patch_realtek.c:1246 SKU: customization=0x000000c6
ALSA sound/pci/hda/patch_realtek.c:1247 SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1248 SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1249 SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1250 SKU: override=0x1
ALSA sound/pci/hda/hda_auto_parser.c:306 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
ALSA sound/pci/hda/hda_auto_parser.c:310    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:314    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:315    mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:319    inputs:
ALSA sound/pci/hda/hda_auto_parser.c:323      Front Mic=0x19
ALSA sound/pci/hda/hda_auto_parser.c:323      Rear Mic=0x18
ALSA sound/pci/hda/hda_auto_parser.c:323      Line=0x1a
ALSA sound/pci/hda/patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x4014c601 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1320 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0262
ALSA sound/pci/hda/hda_generic.c:653 hda_generic: no proper input path found
ALSA sound/pci/hda/hda_generic.c:431 hda_generic: no proper output path found
ALSA sound/pci/hda/hda_generic.c:1007 hda_generic: no PCM found
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
asix 1-1.2.4:1.0 eth0: register 'asix' at usb-0000:00:1d.0-1.2.4, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:42:bb:5b
usbcore: registered new interface driver asix
Adding 2981884k swap on /dev/mapper/fedora-swap.  Priority:-1 extents:1 across:2981884k 
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-2, type ext4), uses xattr
systemd-journald[326]: Received request to flush runtime journal from PID 1
type=1305 audit(980024705.554:4): audit_pid=454 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Loading iSCSI transport class v2.0-870.
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
iscsi: registered transport (tcp)
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
iscsi: registered transport (iser)
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
iscsi: registered transport (bnx2i)
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
iscsi: registered transport (be2iscsi)
In beiscsi_module_init, tt=f7f6b000
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
ip6_tables: (C) 2000-2006 Netfilter Core Team
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Ebtables v2.0 registered
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
asix 1-1.2.4:1.0 eth0: link down
asix 1-1.2.4:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
cgroup: libvirtd (744) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
cgroup: libvirtd (744) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: libvirtd (744) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
usb 1-1.2.3: USB disconnect, device number 6
usb 1-1.2.3: new low-speed USB device number 8 using ehci-pci
usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c05a
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: USB Optical Mouse
usb 1-1.2.3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input14
hid-generic 0003:046D:C05A.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.3/input0
usb 1-1.2.3: USB disconnect, device number 8
usb 1-1.2.3: new low-speed USB device number 9 using ehci-pci
usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c05a
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: USB Optical Mouse
usb 1-1.2.3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input15
hid-generic 0003:046D:C05A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.3/input0
usb 1-1.2.3: USB disconnect, device number 9
usb 1-1.2.3: new low-speed USB device number 10 using ehci-pci
usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c05a
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: USB Optical Mouse
usb 1-1.2.3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input16
hid-generic 0003:046D:C05A.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.3/input0
usb 1-1.2.3: USB disconnect, device number 10
usb 1-1.2.3: new low-speed USB device number 11 using ehci-pci
usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c05a
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: USB Optical Mouse
usb 1-1.2.3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input17
hid-generic 0003:046D:C05A.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.3/input0
usb 1-1.2.3: USB disconnect, device number 11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
[drm] Initialized drm 1.1.0 20060810
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
emgd driver loading...
hdmi_open ERROR: Unsupported port number for internal HDMI
hdmi_open ERROR: Unsupported port number for internal HDMI
hdmi_open ERROR: Unsupported port number for internal HDMI
hdmi_open ERROR: Unsupported port number for internal HDMI
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
[drm] Memory usable by graphics device = 2048M
emgd 0000:00:02.0: irq 105 for MSI/MSI-X
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
igd_query_dc ERROR: igd_query_dc found no match for requested dc = 8
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
convert_pf_emgd_to_drm ERROR: Unknown pixel format 0x0
emgd_overlay_planes_init ERROR: Unknown pixel format; defaulting to YUYV format
create_connector_properties ERROR: Port=3, failed to read EDID to create property
create_connector_properties ERROR: Port=2, failed to read EDID to create property
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
create_connector_properties ERROR: Port=6, failed to read EDID to create property
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
create_connector_properties ERROR: Port=7, failed to read EDID to create property
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
Connector 12 is VGA-1, encoder 0xf223f600
Connector 17 is HDMI-A-1, encoder 0xf223f960
Connector 23 is HDMI-A-2, encoder 0xf223fae0
Connector 29 is DP-1, encoder 0xf223fa20
Connector 47 is DP-2, encoder 0xf223f6c0
fbcon: emgdfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
emgd driver loaded!
[drm] Initialized emgd 2.0.3761 20140624 for 0000:00:02.0 on minor 0
Connector 12 is VGA-1, encoder 0xf223f600
Connector 17 is HDMI-A-1, encoder 0xf223f960
Connector 23 is HDMI-A-2, encoder 0xf223fae0
Connector 29 is DP-1, encoder 0xf223fa20
Connector 47 is DP-2, encoder 0xf223f6c0
Connector 12 is VGA-1, encoder 0xf223f600
Connector 17 is HDMI-A-1, encoder 0xf223f960
Connector 23 is HDMI-A-2, encoder 0xf223fae0
Connector 29 is DP-1, encoder 0xf223fa20
Connector 47 is DP-2, encoder 0xf223f6c0
Connector 12 is VGA-1, encoder 0xf223f600
Connector 17 is HDMI-A-1, encoder 0xf223f960
Connector 23 is HDMI-A-2, encoder 0xf223fae0
Connector 29 is DP-1, encoder 0xf223fa20
Connector 47 is DP-2, encoder 0xf223f6c0
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
usb 1-1.2.3: new low-speed USB device number 12 using ehci-pci
usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c05a
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: USB Optical Mouse
usb 1-1.2.3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input18
hid-generic 0003:046D:C05A.0008: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.3/input0
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
tiger-demo[1337]: segfault at 1 ip 4f335b38 sp bfe27350 error 4 in libc-2.16.so[4f2ee000+1b0000]
tiger-demo[1343]: segfault at 1 ip 4f335b38 sp bf86d8e0 error 4 in libc-2.16.so[4f2ee000+1b0000]
tiger-demo[1355]: segfault at 1 ip 4f335b38 sp bf8fd1e0 error 4 in libc-2.16.so[4f2ee000+1b0000]
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
Connector 12 is VGA-1, encoder 0x       0
Connector 17 is HDMI-A-1, encoder 0x       0
Connector 23 is HDMI-A-2, encoder 0x       0
Connector 29 is DP-1, encoder 0x       0
Connector 47 is DP-2, encoder 0x       0
emgd_fbcon_setcmap ERROR: Invalid parameter.
Connector 12 is VGA-1, encoder 0xf223f600
Connector 17 is HDMI-A-1, encoder 0xf223f960
Connector 23 is HDMI-A-2, encoder 0xf223fae0
Connector 29 is DP-1, encoder 0xf223fa20
Connector 47 is DP-2, encoder 0xf223f6c0
usb 1-1.2.3: USB disconnect, device number 12
usb 1-1.2.3: new low-speed USB device number 13 using ehci-pci
usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c05a
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: USB Optical Mouse
usb 1-1.2.3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input19
hid-generic 0003:046D:C05A.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.3/input0
usb 1-1.2.3: USB disconnect, device number 13
usb 1-1.2.3: new low-speed USB device number 14 using ehci-pci
usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c05a
usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.3: Product: USB Optical Mouse
usb 1-1.2.3: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input20
hid-generic 0003:046D:C05A.000A: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.3/input0
Connector 12 is VGA-1, encoder 0xf223f600
Connector 17 is HDMI-A-1, encoder 0xf223f960
Connector 23 is HDMI-A-2, encoder 0xf223fae0
Connector 29 is DP-1, encoder 0xf223fa20
Connector 47 is DP-2, encoder 0xf223f6c0
Connector 12 is VGA-1, encoder 0xf223f600
Connector 17 is HDMI-A-1, encoder 0xf223f960
Connector 23 is HDMI-A-2, encoder 0xf223fae0
Connector 29 is DP-1, encoder 0xf223fa20
Connector 47 is DP-2, encoder 0xf223f6c0
Connector 12 is VGA-1, encoder 0xf223f600
Connector 17 is HDMI-A-1, encoder 0xf223f960
Connector 23 is HDMI-A-2, encoder 0xf223fae0
Connector 29 is DP-1, encoder 0xf223fa20
Connector 47 is DP-2, encoder 0xf223f6c0
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
Request for unknown module key 'Magrathea: Glacier signing key: 18999bd24a8ff8977bc003e9c5a60f30ff504cc0' err -11
fuse init (API version 7.20)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
irqbalance[557]: segfault at bf1c1ff0 ip 0804b2b0 sp bf1c1ff0 error 6 in irqbalance[8048000+8000]
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
tiger-demo[2953]: segfault at 1 ip 4f335b38 sp bfd5ada0 error 4 in libc-2.16.so[4f2ee000+1b0000]
tiger-demo[2960]: segfault at 1 ip 4f335b38 sp bff6d990 error 4 in libc-2.16.so[4f2ee000+1b0000]
tiger-demo[2972]: segfault at 1 ip 4f335b38 sp bf9f3140 error 4 in libc-2.16.so[4f2ee000+1b0000]
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.
i2c_aux_read_regs_vlv ERROR: AUX channel failed to write start.

Return To cairo-uxa System Information