dmesg - asus

Return To asus System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000d975afff] usable
BIOS-e820: [mem 0x00000000d975b000-0x00000000d9d5bfff] ACPI NVS
BIOS-e820: [mem 0x00000000d9d5c000-0x00000000d9d5efff] type 20
BIOS-e820: [mem 0x00000000d9d5f000-0x00000000d9d75fff] usable
BIOS-e820: [mem 0x00000000d9d76000-0x00000000d9d7bfff] type 20
BIOS-e820: [mem 0x00000000d9d7c000-0x00000000d9d7dfff] usable
BIOS-e820: [mem 0x00000000d9d7e000-0x00000000d9d8bfff] type 20
BIOS-e820: [mem 0x00000000d9d8c000-0x00000000d9f20fff] usable
BIOS-e820: [mem 0x00000000d9f21000-0x00000000d9f24fff] type 20
BIOS-e820: [mem 0x00000000d9f25000-0x00000000d9f6dfff] usable
BIOS-e820: [mem 0x00000000d9f6e000-0x00000000d9f74fff] type 20
BIOS-e820: [mem 0x00000000d9f75000-0x00000000d9f76fff] usable
BIOS-e820: [mem 0x00000000d9f77000-0x00000000d9f83fff] reserved
BIOS-e820: [mem 0x00000000d9f84000-0x00000000d9f94fff] type 20
BIOS-e820: [mem 0x00000000d9f95000-0x00000000d9f97fff] usable
BIOS-e820: [mem 0x00000000d9f98000-0x00000000d9f99fff] type 20
BIOS-e820: [mem 0x00000000d9f9a000-0x00000000d9fb0fff] usable
BIOS-e820: [mem 0x00000000d9fb1000-0x00000000d9fb6fff] type 20
BIOS-e820: [mem 0x00000000d9fb7000-0x00000000d9fbefff] usable
BIOS-e820: [mem 0x00000000d9fbf000-0x00000000d9fbffff] type 20
BIOS-e820: [mem 0x00000000d9fc0000-0x00000000d9fcefff] usable
BIOS-e820: [mem 0x00000000d9fcf000-0x00000000d9fcffff] type 20
BIOS-e820: [mem 0x00000000d9fd0000-0x00000000d9fdafff] usable
BIOS-e820: [mem 0x00000000d9fdb000-0x00000000d9fdffff] type 20
BIOS-e820: [mem 0x00000000d9fe0000-0x00000000da00bfff] usable
BIOS-e820: [mem 0x00000000da00c000-0x00000000da00cfff] type 20
BIOS-e820: [mem 0x00000000da00d000-0x00000000da01cfff] usable
BIOS-e820: [mem 0x00000000da01d000-0x00000000da042fff] type 20
BIOS-e820: [mem 0x00000000da043000-0x00000000da058fff] usable
BIOS-e820: [mem 0x00000000da059000-0x00000000da059fff] type 20
BIOS-e820: [mem 0x00000000da05a000-0x00000000da05afff] usable
BIOS-e820: [mem 0x00000000da05b000-0x00000000da05cfff] type 20
BIOS-e820: [mem 0x00000000da05d000-0x00000000da05dfff] usable
BIOS-e820: [mem 0x00000000da05e000-0x00000000da062fff] type 20
BIOS-e820: [mem 0x00000000da063000-0x00000000da076fff] usable
BIOS-e820: [mem 0x00000000da077000-0x00000000da0d6fff] reserved
BIOS-e820: [mem 0x00000000da0d7000-0x00000000da0effff] type 20
BIOS-e820: [mem 0x00000000da0f0000-0x00000000da619fff] reserved
BIOS-e820: [mem 0x00000000da61a000-0x00000000da899fff] ACPI NVS
BIOS-e820: [mem 0x00000000da89a000-0x00000000da89efff] ACPI data
BIOS-e820: [mem 0x00000000da89f000-0x00000000da89ffff] usable
BIOS-e820: [mem 0x00000000da8a0000-0x00000000da8e2fff] ACPI NVS
BIOS-e820: [mem 0x00000000da8e3000-0x00000000daceffff] usable
BIOS-e820: [mem 0x00000000dacf0000-0x00000000daff3fff] reserved
BIOS-e820: [mem 0x00000000daff4000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000dbc00000-0x00000000dfdfffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011f1fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI=0xda86f000  ACPI 2.0=0xda86f000  SMBIOS=0xda118398 
efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000005f000) (0MB)
efi: mem01: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000060000-0x000000000009e000) (0MB)
efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x00000000024ff000) (20MB)
efi: mem06: type=7, attr=0xf, range=[0x00000000024ff000-0x0000000020000000) (475MB)
efi: mem07: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000020200000-0x000000003492c000) (327MB)
efi: mem09: type=2, attr=0xf, range=[0x000000003492c000-0x000000003648e000) (27MB)
efi: mem10: type=7, attr=0xf, range=[0x000000003648e000-0x0000000040004000) (155MB)
efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x00000000a1e8d000) (1566MB)
efi: mem13: type=2, attr=0xf, range=[0x00000000a1e8d000-0x00000000d7ff1000) (865MB)
efi: mem14: type=1, attr=0xf, range=[0x00000000d7ff1000-0x00000000d8125000) (1MB)
efi: mem15: type=7, attr=0xf, range=[0x00000000d8125000-0x00000000d816d000) (0MB)
efi: mem16: type=2, attr=0xf, range=[0x00000000d816d000-0x00000000d8257000) (0MB)
efi: mem17: type=4, attr=0xf, range=[0x00000000d8257000-0x00000000d82c6000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000d82c6000-0x00000000d82cf000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000d82cf000-0x00000000d83eb000) (1MB)
efi: mem20: type=2, attr=0xf, range=[0x00000000d83eb000-0x00000000d83ed000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x00000000d83ed000-0x00000000d90b6000) (12MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000d90b6000-0x00000000d9742000) (6MB)
efi: mem23: type=2, attr=0xf, range=[0x00000000d9742000-0x00000000d974e000) (0MB)
efi: mem24: type=3, attr=0xf, range=[0x00000000d974e000-0x00000000d975b000) (0MB)
efi: mem25: type=10, attr=0xf, range=[0x00000000d975b000-0x00000000d9d5c000) (6MB)
efi: mem26: type=5, attr=0x800000000000000f, range=[0x00000000d9d5c000-0x00000000d9d5f000) (0MB)
efi: mem27: type=3, attr=0xf, range=[0x00000000d9d5f000-0x00000000d9d76000) (0MB)
efi: mem28: type=5, attr=0x800000000000000f, range=[0x00000000d9d76000-0x00000000d9d7c000) (0MB)
efi: mem29: type=3, attr=0xf, range=[0x00000000d9d7c000-0x00000000d9d7e000) (0MB)
efi: mem30: type=5, attr=0x800000000000000f, range=[0x00000000d9d7e000-0x00000000d9d8c000) (0MB)
efi: mem31: type=3, attr=0xf, range=[0x00000000d9d8c000-0x00000000d9f21000) (1MB)
efi: mem32: type=5, attr=0x800000000000000f, range=[0x00000000d9f21000-0x00000000d9f25000) (0MB)
efi: mem33: type=3, attr=0xf, range=[0x00000000d9f25000-0x00000000d9f6e000) (0MB)
efi: mem34: type=5, attr=0x800000000000000f, range=[0x00000000d9f6e000-0x00000000d9f75000) (0MB)
efi: mem35: type=3, attr=0xf, range=[0x00000000d9f75000-0x00000000d9f77000) (0MB)
efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000d9f77000-0x00000000d9f84000) (0MB)
efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000d9f84000-0x00000000d9f95000) (0MB)
efi: mem38: type=3, attr=0xf, range=[0x00000000d9f95000-0x00000000d9f98000) (0MB)
efi: mem39: type=5, attr=0x800000000000000f, range=[0x00000000d9f98000-0x00000000d9f9a000) (0MB)
efi: mem40: type=3, attr=0xf, range=[0x00000000d9f9a000-0x00000000d9fb1000) (0MB)
efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000d9fb1000-0x00000000d9fb7000) (0MB)
efi: mem42: type=3, attr=0xf, range=[0x00000000d9fb7000-0x00000000d9fbf000) (0MB)
efi: mem43: type=5, attr=0x800000000000000f, range=[0x00000000d9fbf000-0x00000000d9fc0000) (0MB)
efi: mem44: type=3, attr=0xf, range=[0x00000000d9fc0000-0x00000000d9fcf000) (0MB)
efi: mem45: type=5, attr=0x800000000000000f, range=[0x00000000d9fcf000-0x00000000d9fd0000) (0MB)
efi: mem46: type=3, attr=0xf, range=[0x00000000d9fd0000-0x00000000d9fdb000) (0MB)
efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000d9fdb000-0x00000000d9fe0000) (0MB)
efi: mem48: type=3, attr=0xf, range=[0x00000000d9fe0000-0x00000000da00c000) (0MB)
efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000da00c000-0x00000000da00d000) (0MB)
efi: mem50: type=3, attr=0xf, range=[0x00000000da00d000-0x00000000da01d000) (0MB)
efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000da01d000-0x00000000da043000) (0MB)
efi: mem52: type=3, attr=0xf, range=[0x00000000da043000-0x00000000da059000) (0MB)
efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000da059000-0x00000000da05a000) (0MB)
efi: mem54: type=3, attr=0xf, range=[0x00000000da05a000-0x00000000da05b000) (0MB)
efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000da05b000-0x00000000da05d000) (0MB)
efi: mem56: type=3, attr=0xf, range=[0x00000000da05d000-0x00000000da05e000) (0MB)
efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000da05e000-0x00000000da063000) (0MB)
efi: mem58: type=3, attr=0xf, range=[0x00000000da063000-0x00000000da077000) (0MB)
efi: mem59: type=6, attr=0x800000000000000f, range=[0x00000000da077000-0x00000000da0d7000) (0MB)
efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000da0d7000-0x00000000da0f0000) (0MB)
efi: mem61: type=6, attr=0x800000000000000f, range=[0x00000000da0f0000-0x00000000da0f3000) (0MB)
efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000da0f3000-0x00000000da0fa000) (0MB)
efi: mem63: type=6, attr=0x800000000000000f, range=[0x00000000da0fa000-0x00000000da0fc000) (0MB)
efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000da0fc000-0x00000000da11a000) (0MB)
efi: mem65: type=0, attr=0xf, range=[0x00000000da11a000-0x00000000da36c000) (2MB)
efi: mem66: type=0, attr=0xf, range=[0x00000000da36c000-0x00000000da5af000) (2MB)
efi: mem67: type=0, attr=0xf, range=[0x00000000da5af000-0x00000000da5be000) (0MB)
efi: mem68: type=0, attr=0xf, range=[0x00000000da5be000-0x00000000da5c0000) (0MB)
efi: mem69: type=0, attr=0xf, range=[0x00000000da5c0000-0x00000000da5c7000) (0MB)
efi: mem70: type=0, attr=0xf, range=[0x00000000da5c7000-0x00000000da61a000) (0MB)
efi: mem71: type=10, attr=0xf, range=[0x00000000da61a000-0x00000000da6ea000) (0MB)
efi: mem72: type=10, attr=0xf, range=[0x00000000da6ea000-0x00000000da885000) (1MB)
efi: mem73: type=10, attr=0xf, range=[0x00000000da885000-0x00000000da886000) (0MB)
efi: mem74: type=10, attr=0xf, range=[0x00000000da886000-0x00000000da89a000) (0MB)
efi: mem75: type=9, attr=0xf, range=[0x00000000da89a000-0x00000000da89f000) (0MB)
efi: mem76: type=4, attr=0xf, range=[0x00000000da89f000-0x00000000da8a0000) (0MB)
efi: mem77: type=10, attr=0xf, range=[0x00000000da8a0000-0x00000000da8e3000) (0MB)
efi: mem78: type=4, attr=0xf, range=[0x00000000da8e3000-0x00000000daa2f000) (1MB)
efi: mem79: type=3, attr=0xf, range=[0x00000000daa2f000-0x00000000dacc7000) (2MB)
efi: mem80: type=4, attr=0xf, range=[0x00000000dacc7000-0x00000000dacd7000) (0MB)
efi: mem81: type=3, attr=0xf, range=[0x00000000dacd7000-0x00000000dace9000) (0MB)
efi: mem82: type=4, attr=0xf, range=[0x00000000dace9000-0x00000000dacf0000) (0MB)
efi: mem83: type=6, attr=0x800000000000000f, range=[0x00000000dacf0000-0x00000000daff4000) (3MB)
efi: mem84: type=4, attr=0xf, range=[0x00000000daff4000-0x00000000db000000) (0MB)
efi: mem85: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f200000) (498MB)
efi: mem86: type=0, attr=0x8000000000000000, range=[0x00000000dbc00000-0x00000000dfe00000) (66MB)
efi: mem87: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem91: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem92: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: ASUSTeK COMPUTER INC. K55A/K55A, BIOS K55A.404 08/20/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11f200 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 100000000 mask FE0000000 write-back
  2 base 0E0000000 mask FE0000000 uncachable
  3 base 0DC000000 mask FFC000000 uncachable
  4 base 0DBC00000 mask FFFC00000 uncachable
  5 base 11F800000 mask FFF800000 uncachable
  6 base 11F400000 mask FFFC00000 uncachable
  7 base 11F200000 mask FFFE00000 uncachable
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 3516MB, range: 4MB, type UC
reg 5, base: 4600MB, range: 8MB, type UC
reg 6, base: 4596MB, range: 4MB, type UC
reg 7, base: 4594MB, range: 2MB, type UC
total RAM covered: 4014M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 128M 	num_reg: 9  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3516MB, range: 4MB, type UC
reg 4, base: 3520MB, range: 64MB, type UC
reg 5, base: 4GB, range: 512MB, type WB
reg 6, base: 4594MB, range: 2MB, type UC
reg 7, base: 4596MB, range: 4MB, type UC
reg 8, base: 4600MB, range: 8MB, type UC
e820: update [mem 0xdbc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x11f000000-0x11f1fffff]
 [mem 0x11f000000-0x11f1fffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11effffff]
 [mem 0x11c000000-0x11effffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11bffffff]
 [mem 0x100000000-0x11bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x40003fff]
 [mem 0x20200000-0x3fffffff] page 2M
 [mem 0x40000000-0x40003fff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x40005000-0xd975afff]
 [mem 0x40005000-0x401fffff] page 4k
 [mem 0x40200000-0xd95fffff] page 2M
 [mem 0xd9600000-0xd975afff] page 4k
init_memory_mapping: [mem 0xd9d5f000-0xd9d75fff]
 [mem 0xd9d5f000-0xd9d75fff] page 4k
init_memory_mapping: [mem 0xd9d7c000-0xd9d7dfff]
 [mem 0xd9d7c000-0xd9d7dfff] page 4k
init_memory_mapping: [mem 0xd9d8c000-0xd9f20fff]
 [mem 0xd9d8c000-0xd9f20fff] page 4k
init_memory_mapping: [mem 0xd9f25000-0xd9f6dfff]
 [mem 0xd9f25000-0xd9f6dfff] page 4k
init_memory_mapping: [mem 0xd9f75000-0xd9f76fff]
 [mem 0xd9f75000-0xd9f76fff] page 4k
init_memory_mapping: [mem 0xd9f95000-0xd9f97fff]
 [mem 0xd9f95000-0xd9f97fff] page 4k
init_memory_mapping: [mem 0xd9f9a000-0xd9fb0fff]
 [mem 0xd9f9a000-0xd9fb0fff] page 4k
init_memory_mapping: [mem 0xd9fb7000-0xd9fbefff]
 [mem 0xd9fb7000-0xd9fbefff] page 4k
init_memory_mapping: [mem 0xd9fc0000-0xd9fcefff]
 [mem 0xd9fc0000-0xd9fcefff] page 4k
init_memory_mapping: [mem 0xd9fd0000-0xd9fdafff]
 [mem 0xd9fd0000-0xd9fdafff] page 4k
init_memory_mapping: [mem 0xd9fe0000-0xda00bfff]
 [mem 0xd9fe0000-0xda00bfff] page 4k
init_memory_mapping: [mem 0xda00d000-0xda01cfff]
 [mem 0xda00d000-0xda01cfff] page 4k
init_memory_mapping: [mem 0xda043000-0xda058fff]
 [mem 0xda043000-0xda058fff] page 4k
init_memory_mapping: [mem 0xda05a000-0xda05afff]
 [mem 0xda05a000-0xda05afff] page 4k
init_memory_mapping: [mem 0xda05d000-0xda05dfff]
 [mem 0xda05d000-0xda05dfff] page 4k
init_memory_mapping: [mem 0xda063000-0xda076fff]
 [mem 0xda063000-0xda076fff] page 4k
init_memory_mapping: [mem 0xda89f000-0xda89ffff]
 [mem 0xda89f000-0xda89ffff] page 4k
init_memory_mapping: [mem 0xda8e3000-0xdaceffff]
 [mem 0xda8e3000-0xda9fffff] page 4k
 [mem 0xdaa00000-0xdabfffff] page 2M
 [mem 0xdac00000-0xdaceffff] page 4k
init_memory_mapping: [mem 0xdaff4000-0xdaffffff]
 [mem 0xdaff4000-0xdaffffff] page 4k
RAMDISK: [mem 0x3492c000-0x3648dfff]
ACPI: RSDP 00000000da86f000 000024 (v02 _ASUS_)
ACPI: XSDT 00000000da86f080 000084 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FACP 00000000da880060 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: DSDT 00000000da86f190 010EC9 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
ACPI: FACS 00000000da897080 000040
ACPI: APIC 00000000da880170 000072 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FPDT 00000000da8801e8 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: ECDT 00000000da880230 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: MCFG 00000000da8802f8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: HPET 00000000da880338 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 00000000da880370 000632 (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
ACPI: SSDT 00000000da8809a8 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
ACPI: SSDT 00000000da880e48 00098E (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000da8817d8 000A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: BGRT 00000000da882270 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
ACPI: MSDM 00000000da619e18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011f1fffff]
Initmem setup node 0 [mem 0x00000000-0x11f1fffff]
  NODE_DATA [mem 0x11f1f2000-0x11f1f6fff]
 [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a800000-ffff88011e7fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x11f1fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0x1fffffff]
  node   0: [mem 0x20200000-0x40003fff]
  node   0: [mem 0x40005000-0xd975afff]
  node   0: [mem 0xd9d5f000-0xd9d75fff]
  node   0: [mem 0xd9d7c000-0xd9d7dfff]
  node   0: [mem 0xd9d8c000-0xd9f20fff]
  node   0: [mem 0xd9f25000-0xd9f6dfff]
  node   0: [mem 0xd9f75000-0xd9f76fff]
  node   0: [mem 0xd9f95000-0xd9f97fff]
  node   0: [mem 0xd9f9a000-0xd9fb0fff]
  node   0: [mem 0xd9fb7000-0xd9fbefff]
  node   0: [mem 0xd9fc0000-0xd9fcefff]
  node   0: [mem 0xd9fd0000-0xd9fdafff]
  node   0: [mem 0xd9fe0000-0xda00bfff]
  node   0: [mem 0xda00d000-0xda01cfff]
  node   0: [mem 0xda043000-0xda058fff]
  node   0: [mem 0xda05a000-0xda05afff]
  node   0: [mem 0xda05d000-0xda05dfff]
  node   0: [mem 0xda063000-0xda076fff]
  node   0: [mem 0xda89f000-0xda89ffff]
  node   0: [mem 0xda8e3000-0xdaceffff]
  node   0: [mem 0xdaff4000-0xdaffffff]
  node   0: [mem 0x100000000-0x11f1fffff]
On node 0 totalpages: 1019310
  DMA zone: 64 pages used for memmap
  DMA zone: 24 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13873 pages used for memmap
  DMA32 zone: 887825 pages, LIFO batch:31
  Normal zone: 1992 pages used for memmap
  Normal zone: 127488 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xd975b000-0xd9d5bfff]
PM: Registered nosave memory: [mem 0xd9d5c000-0xd9d5efff]
PM: Registered nosave memory: [mem 0xd9d76000-0xd9d7bfff]
PM: Registered nosave memory: [mem 0xd9d7e000-0xd9d8bfff]
PM: Registered nosave memory: [mem 0xd9f21000-0xd9f24fff]
PM: Registered nosave memory: [mem 0xd9f6e000-0xd9f74fff]
PM: Registered nosave memory: [mem 0xd9f77000-0xd9f83fff]
PM: Registered nosave memory: [mem 0xd9f84000-0xd9f94fff]
PM: Registered nosave memory: [mem 0xd9f98000-0xd9f99fff]
PM: Registered nosave memory: [mem 0xd9fb1000-0xd9fb6fff]
PM: Registered nosave memory: [mem 0xd9fbf000-0xd9fbffff]
PM: Registered nosave memory: [mem 0xd9fcf000-0xd9fcffff]
PM: Registered nosave memory: [mem 0xd9fdb000-0xd9fdffff]
PM: Registered nosave memory: [mem 0xda00c000-0xda00cfff]
PM: Registered nosave memory: [mem 0xda01d000-0xda042fff]
PM: Registered nosave memory: [mem 0xda059000-0xda059fff]
PM: Registered nosave memory: [mem 0xda05b000-0xda05cfff]
PM: Registered nosave memory: [mem 0xda05e000-0xda062fff]
PM: Registered nosave memory: [mem 0xda077000-0xda0d6fff]
PM: Registered nosave memory: [mem 0xda0d7000-0xda0effff]
PM: Registered nosave memory: [mem 0xda0f0000-0xda619fff]
PM: Registered nosave memory: [mem 0xda61a000-0xda899fff]
PM: Registered nosave memory: [mem 0xda89a000-0xda89efff]
PM: Registered nosave memory: [mem 0xda8a0000-0xda8e2fff]
PM: Registered nosave memory: [mem 0xdacf0000-0xdaff3fff]
PM: Registered nosave memory: [mem 0xdb000000-0xdbbfffff]
PM: Registered nosave memory: [mem 0xdbc00000-0xdfdfffff]
PM: Registered nosave memory: [mem 0xdfe00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdfe00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88011ee00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1003357
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3878868K/4077240K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 198372K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.336 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.67 BogoMIPS (lpj=9977344)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19954.68 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xd975b000-0xd9d5bfff] (6295552 bytes)
PM: Registering ACPI NVS region [mem 0xda61a000-0xda899fff] (2621440 bytes)
PM: Registering ACPI NVS region [mem 0xda8a0000-0xda8e2fff] (274432 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:36:03, date: 06/20/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000da5c7018 000853 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000853 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000da5c8a98 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000da5c9c18 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7e1a000-0xf7e1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7e18000-0xf7e183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7e16000-0xf7e167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xf7d80000-0xf7d8ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: [10ec:5289] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.2: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:03:00.2: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.2: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.2: supports D1 D2
pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xd975b000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9d76000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9d7e000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9f21000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9f6e000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9f77000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9f98000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9fb1000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9fbf000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9fcf000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9fdb000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda00c000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda01d000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda059000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda05b000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda05e000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda077000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda8a0000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdacf0000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x11f200000-0x11fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io  0x0680-0x069f] has been reserved
system 00:04: [io  0x1000-0x100f] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0x0400-0x0453] could not be reserved
system 00:04: [io  0x0458-0x047f] has been reserved
system 00:04: [io  0x0500-0x057f] has been reserved
system 00:04: [io  0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xdfe00000-0xdfe00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xdfe00000-0xdfe00fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0xdfe00000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28040K (ffff88003492c000 - ffff88003648e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd4257000-0xd8257000] (64MB) mapped at [ffff8800d4257000-ffff8800d8256fff]
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1403278563.632:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7672
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (55 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
ACPI: Battery Slot [BAT0] (battery present)
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 2:674:639
rtc_cmos 00:05: setting system clock to 2014-06-20 15:36:03 UTC (1403278563)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
systemd-udevd[115]: starting version 204
wmi: Mapper loaded
rtsx_pci 0000:03:00.0: irq 41 for MSI/MSI-X
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.2: irq 42 for MSI/MSI-X
r8169 0000:03:00.2 eth0: RTL8411 at 0xffffc9000063e000, 50:46:5d:e9:b7:38, XID 08800800 IRQ 42
r8169 0000:03:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 43
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16200 irq 43
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 410000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATAPI: Slimtype DVD A  DS8A8SH, KAA3, max UDMA/100
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM            Slimtype DVD A  DS8A8SH   KAA3 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2494.334 MHz
usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2883
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: ASUS USB2.0 Webcam
usb 1-1.3: Manufacturer: 04G626000611BQ29B001JGZ
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:31: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
random: nonblocking pool is initialized
Switched to clocksource tsc
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
Adding 1952764k swap on /dev/sda7.  Priority:-1 extents:1 across:1952764k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-udevd[400]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPIS 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
device-mapper: multipath: version 1.6.0 loaded
psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Linux video capture interface: v2.00
cfg80211: Calling CRDA to update world regulatory domain
uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x40089d2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000008
SKU: customization=0x0000009d
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   inputs:
     Internal Mic=0x19
     Mic=0x18
realtek: No valid SSID, checking pincfg 0x40089d2d for NID 0x1d
realtek: Enabling init ASM_ID=0x9d2d CODEC_ID=10ec0270
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
ath: phy0: Disable PLL PowerSave
ath: phy0: Enable LNA combining
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004a00000, irq=17
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
intel_rapl: domain uncore energy ctr 684576:684576 not working, skip
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 7.9
asus_wmi: SFUN value: 0x4a0877
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input17
asus_wmi: Backlight controlled by ACPI video driver
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: failsafe main process (622) killed by TERM signal
init: cups main process (751) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.2 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: samba-ad-dc main process (815) terminated with status 1
init: alsa-restore main process (1147) terminated with status 99
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1383) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 2/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
init: upstart-udev-bridge main process (373) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (489) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (649) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: systemd-logind main process (764) killed by TERM signal
init: smbd main process (654) killed by TERM signal
init: upstart-udev-bridge main process (6887) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (6892) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (6891) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
systemd-udevd[13430]: starting version 204
init: samba-ad-dc main process (13957) terminated with status 1
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
libcrc32c: module verification failed: signature and/or  required key missing - tainting kernel
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
xfs: module has bad taint, not creating trace events
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
JFS: nTxBlock = 8192, nTxLock = 65536
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
NTFS driver 2.1.30 [Flags: R/O MODULE].
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
QNX4 filesystem 0.2.3 registered.
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
xor: automatically using best checksumming function:
   avx       : 12486.000 MB/sec
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
raid6: sse2x1    5000 MB/s
raid6: sse2x2    6111 MB/s
raid6: sse2x4    7083 MB/s
raid6: using algorithm sse2x4 (7083 MB/s)
raid6: using ssse3x2 recovery algorithm
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
btrfs: module has bad taint, not creating trace events
bio: create slab  at 1
Btrfs loaded
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 2/3)
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 3/3)
wlan0: authentication with 2c:b0:5d:d9:ed:8b timed out
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 2/3)
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 3/3)
wlan0: authentication with 2c:b0:5d:d9:ed:8b timed out
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 2/3)
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 3/3)
wlan0: authentication with 2c:b0:5d:d9:ed:8b timed out
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
mmc0: cannot verify signal voltage switch
mmc0: new ultra high speed SDR104 SDXC card at address 0001
Request for unknown module key 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0' err -11
mmcblk0: mmc0:0001 00000 58.5 GiB 
 mmcblk0: p1
mmc0: card 0001 removed
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
perf samples too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 2/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 2c:b0:5d:d9:ed:8b
wlan0: send auth to 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 2c:b0:5d:d9:ed:8b (try 1/3)
wlan0: RX AssocResp from 2c:b0:5d:d9:ed:8b (capab=0x411 status=0 aid=3)
wlan0: associated

Return To asus System Information