dmesg - dellpocdev001-gluster6nodes-gfs
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-24-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38-Ubuntu SMP Tue May 1 16:18:50 UTC 2012 (Ubuntu 3.2.0-24.38-generic 3.2.16)
Command line: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic root=/dev/mapper/dellpocdev001-root ro quiet splash
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 0000000000100000 - 00000000bb2e0000 (usable)
BIOS-e820: 00000000bb2e0000 - 00000000bd31c000 (reserved)
BIOS-e820: 00000000bd31c000 - 00000000bd35b000 (ACPI data)
BIOS-e820: 00000000bd35b000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000001840000000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Dell Inc. PowerEdge R420/072XWF, BIOS 1.0.0 04/13/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x1840000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-D7FFF write-back
D8000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFF80000000 write-back
1 base 000080000000 mask 3FFFC0000000 write-back
2 base 000100000000 mask 3FFF00000000 write-back
3 base 000200000000 mask 3FFE00000000 write-back
4 base 000400000000 mask 3FFC00000000 write-back
5 base 000800000000 mask 3FF800000000 write-back
6 base 001000000000 mask 3FF800000000 write-back
7 base 001800000000 mask 3FFFC0000000 write-back
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbb2e0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fe710] fe710
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000097000] 97000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bb2e0000
0000000000 - 0080000000 page 1G
0080000000 - 00bb200000 page 2M
00bb200000 - 00bb2e0000 page 4k
kernel direct mapping tables up to bb2e0000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000001840000000
0100000000 - 1840000000 page 1G
kernel direct mapping tables up to 1840000000 @ bb2df000-bb2e0000
RAMDISK: 363d6000 - 371e3000
ACPI: RSDP 00000000000f14d0 00024 (v02 DELL )
ACPI: XSDT 00000000000f15d4 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000bd34111c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000bd31c000 05FD9 (v01 DELL PE_SC3 00000001 INTL 20110211)
ACPI: FACS 00000000bd343000 00040
ACPI: APIC 00000000bd340478 0016A (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000bd3405e4 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000bd340638 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 00000000bd340674 00110 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000bd340950 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000bd340990 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000bd340ac8 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000bd32217c 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000bd3223ec 0055C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000bd321fdc 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000bd32200c 00170 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000bd3410b4 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000bd340cf0 003C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000bd344000 09574 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 0x00 -> Node 0
SRAT: PXM 2 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x02 -> Node 0
SRAT: PXM 2 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x04 -> Node 0
SRAT: PXM 2 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x06 -> Node 0
SRAT: PXM 2 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x08 -> Node 0
SRAT: PXM 2 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x0a -> Node 0
SRAT: PXM 2 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x0c -> Node 0
SRAT: PXM 2 -> APIC 0x2c -> Node 1
SRAT: PXM 1 -> APIC 0x0e -> Node 0
SRAT: PXM 2 -> APIC 0x2e -> Node 1
SRAT: PXM 1 -> APIC 0x01 -> Node 0
SRAT: PXM 2 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x03 -> Node 0
SRAT: PXM 2 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x05 -> Node 0
SRAT: PXM 2 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x07 -> Node 0
SRAT: PXM 2 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x09 -> Node 0
SRAT: PXM 2 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x0b -> Node 0
SRAT: PXM 2 -> APIC 0x2b -> Node 1
SRAT: PXM 1 -> APIC 0x0d -> Node 0
SRAT: PXM 2 -> APIC 0x2d -> Node 1
SRAT: PXM 1 -> APIC 0x0f -> Node 0
SRAT: PXM 2 -> APIC 0x2f -> Node 1
SRAT: Node 0 PXM 1 0-c40000000
SRAT: Node 1 PXM 2 c40000000-1840000000
Initmem setup node 0 0000000000000000-0000000c40000000
NODE_DATA [0000000c3fffb000 - 0000000c3fffffff]
Initmem setup node 1 0000000c40000000-0000001840000000
NODE_DATA [000000183fffb000 - 000000183fffffff]
[ffffea0000000000-ffffea0030ffffff] PMD -> [ffff880c0fe00000-ffff880c3fdfffff] on node 0
[ffffea0031000000-ffffea0060ffffff] PMD -> [ffff88180f600000-ffff88183f5fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x01840000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x000bb2e0
0: 0x00100000 -> 0x00c40000
1: 0x00c40000 -> 0x01840000
On node 0 totalpages: 12563052
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 746272 pages, LIFO batch:31
Normal zone: 184320 pages used for memmap
Normal zone: 11612160 pages, LIFO batch:31
On node 1 totalpages: 12582912
Normal zone: 196608 pages used for memmap
Normal zone: 12386304 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x2f] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 32-55
ACPI: IOAPIC (id[0x02] address[0xfec7f000] gsi_base[64])
IOAPIC[2]: apic_id 2, version 32, address 0xfec7f000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 104
PM: Registered nosave memory: 000000000009c000 - 0000000000100000
PM: Registered nosave memory: 00000000bb2e0000 - 00000000bd31c000
PM: Registered nosave memory: 00000000bd31c000 - 00000000bd35b000
PM: Registered nosave memory: 00000000bd35b000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff880c0fc00000 s83072 r8192 d23424 u131072
pcpu-alloc: s83072 r8192 d23424 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 24748647
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic root=/dev/mapper/dellpocdev001-root ro quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 98910980k/101711872k available (6567k kernel code, 1128016k absent, 1672876k reserved, 6636k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:2024 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 805306368 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2100.039 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.07 BogoMIPS (lpj=8400156)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 27050 entries in 107 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000d3000000 flags: 0x0
IOMMU 0: reg_base_addr d3000000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: DRHD base: 0x000000df100000 flags: 0x1
IOMMU 1: reg_base_addr df100000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x000000bf458000 end: 0x000000bf46ffff
DMAR: RMRR base: 0x000000bf450000 end: 0x000000bf450fff
DMAR: RMRR base: 0x000000bf452000 end: 0x000000bf452fff
DMAR: ATSR flags: 0x0
IOAPIC id 2 under DRHD base 0xd3000000 IOMMU 0
IOAPIC id 0 under DRHD base 0xdf100000 IOMMU 1
IOAPIC id 1 under DRHD base 0xdf100000 IOMMU 1
HPET id 0 under DRHD base 0xdf100000
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.2.0/drivers/iommu/intr_remapping.c:558 enable_intr_remapping+0x77/0x1ab()
Hardware name: PowerEdge R420
Your BIOS is broken and requested that x2apic be disabled
This will leave your machine vulnerable to irq-injection attacks
Use 'intremap=no_x2apic_optout' to override BIOS request
Modules linked in:
Pid: 1, comm: swapper/0 Not tainted 3.2.0-24-generic #38-Ubuntu
Call Trace:
[] warn_slowpath_common+0x7f/0xc0
[] warn_slowpath_fmt+0x46/0x50
[] enable_intr_remapping+0x77/0x1ab
[] enable_IR+0x39/0x42
[] enable_IR_x2apic+0x87/0x1de
[] ? set_cpu_sibling_map+0x326/0x344
[] default_setup_apic_routing+0x12/0x78
[] native_smp_prepare_cpus+0x1af/0x2a2
[] kernel_init+0x76/0x14e
[] kernel_thread_helper+0x4/0x10
[] ? start_kernel+0x3c7/0x3c7
[] ? gs_change+0x13/0x13
---[ end trace a7919e7f17c0a725 ]---
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2450 0 @ 2.10GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 1, Processors #1
smpboot cpu 1: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #2
smpboot cpu 2: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #3
smpboot cpu 3: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #4
smpboot cpu 4: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #5
smpboot cpu 5: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #6
smpboot cpu 6: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #7
smpboot cpu 7: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #8
smpboot cpu 8: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #9
smpboot cpu 9: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #10
smpboot cpu 10: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #11
smpboot cpu 11: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #12
smpboot cpu 12: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #13
smpboot cpu 13: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #14
smpboot cpu 14: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #15
smpboot cpu 15: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #16
smpboot cpu 16: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #17
smpboot cpu 17: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #18
smpboot cpu 18: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #19
smpboot cpu 19: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #20
smpboot cpu 20: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #21
smpboot cpu 21: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #22
smpboot cpu 22: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #23
smpboot cpu 23: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #24
smpboot cpu 24: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #25
smpboot cpu 25: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #26
smpboot cpu 26: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #27
smpboot cpu 27: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #28
smpboot cpu 28: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #29
smpboot cpu 29: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #30
smpboot cpu 30: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #31 Ok.
smpboot cpu 31: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 32 CPUs
Total of 32 processors activated (134399.22 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
print_constraints: dummy:
RTC time: 21:53:27, date: 06/19/14
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: Dell System detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x1fff]
pci_root PNP0A08:00: host bridge window [io 0x8000-0x9fff]
pci_root PNP0A08:00: host bridge window [io 0xa000-0xbfff]
pci_root PNP0A08:00: host bridge window [io 0xc000-0xdfff]
pci_root PNP0A08:00: host bridge window [io 0xe000-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:3c00] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3c02] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: [8086:3c08] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: [8086:3c28] type 0 class 0x000880
pci 0000:00:05.2: [8086:3c2a] type 0 class 0x000880
pci 0000:00:11.0: [8086:1d3e] type 1 class 0x000604
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: [8086:1d3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xdf0fb000-0xdf0fb00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: [8086:1d3b] type 0 class 0x000780
pci 0000:00:16.1: reg 10: [mem 0xdf0fc000-0xdf0fc00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: [8086:1d2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xdf0fd000-0xdf0fd3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: [8086:1d10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:1d18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.7: [8086:1d1e] type 1 class 0x000604
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: [8086:1d26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xdf0fe000-0xdf0fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:1d41] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1d02] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xece8-0xecef]
pci 0000:00:1f.2: reg 14: [io 0xecf8-0xecfb]
pci 0000:00:1f.2: reg 18: [io 0xecf0-0xecf7]
pci 0000:00:1f.2: reg 1c: [io 0xecfc-0xecff]
pci 0000:00:1f.2: reg 20: [io 0xecc0-0xecdf]
pci 0000:00:1f.2: reg 24: [mem 0xdf0ff000-0xdf0ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: [1000:0073] type 0 class 0x000104
pci 0000:01:00.0: reg 10: [io 0xfc00-0xfcff]
pci 0000:01:00.0: reg 14: [mem 0xdcffc000-0xdcffffff 64bit]
pci 0000:01:00.0: reg 1c: [mem 0xdcf80000-0xdcfbffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc01ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0xffff]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:03.0: PCI bridge to [bus 08-08]
pci 0000:00:11.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
pci 0000:02:00.0: [14e4:165f] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0xd90a0000-0xd90affff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xd90b0000-0xd90bffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd90c0000-0xd90cffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xdd000000-0xdd03ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: [14e4:165f] type 0 class 0x000200
pci 0000:02:00.1: reg 10: [mem 0xd90d0000-0xd90dffff 64bit pref]
pci 0000:02:00.1: reg 18: [mem 0xd90e0000-0xd90effff 64bit pref]
pci 0000:02:00.1: reg 20: [mem 0xd90f0000-0xd90fffff 64bit pref]
pci 0000:02:00.1: reg 30: [mem 0xdd000000-0xdd03ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: bridge window [mem 0xdd000000-0xdd7fffff]
pci 0000:00:1c.4: bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:03:00.0: [1912:0013] type 1 class 0x000604
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 03-07]
pci 0000:00:1c.7: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:00:1c.7: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:00.0: [1912:0013] type 1 class 0x000604
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:01.0: [1912:0013] type 1 class 0x000604
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:01.0: PME# disabled
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:03:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:05:00.0: [1912:0012] type 1 class 0x000604
pci 0000:04:00.0: PCI bridge to [bus 05-06]
pci 0000:04:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:04:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:06:00.0: [102b:0534] type 0 class 0x000300
pci 0000:06:00.0: reg 10: [mem 0xd8000000-0xd8ffffff pref]
pci 0000:06:00.0: reg 14: [mem 0xde7fc000-0xde7fffff]
pci 0000:06:00.0: reg 18: [mem 0xdd800000-0xddffffff]
pci 0000:05:00.0: PCI bridge to [bus 06-06]
pci 0000:05:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:05:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:01.0: PCI bridge to [bus 07-07]
pci 0000:04:01.0: bridge window [mem 0xdef00000-0xdeffffff]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x1fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x8000-0x9fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-7e])
pci_root PNP0A08:01: host bridge window [io 0x2000-0x3fff]
pci_root PNP0A08:01: host bridge window [io 0x4000-0x5fff]
pci_root PNP0A08:01: host bridge window [io 0x6000-0x7fff]
pci_root PNP0A08:01: host bridge window [mem 0xd0000000-0xd7ffffff]
pci 0000:40:03.0: [8086:3c08] type 1 class 0x000604
pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.0: PME# disabled
pci 0000:40:05.0: [8086:3c28] type 0 class 0x000880
pci 0000:40:05.2: [8086:3c2a] type 0 class 0x000880
pci 0000:40:03.0: PCI bridge to [bus 41-41]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXB._PRT]
pci0000:40: Requesting ACPI _OSC control (0x15)
pci0000:40: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [P0B1] (domain 0000 [bus 3f])
pci 0000:3f:08.0: [8086:3c80] type 0 class 0x000880
pci 0000:3f:09.0: [8086:3c90] type 0 class 0x000880
pci 0000:3f:0a.0: [8086:3cc0] type 0 class 0x000880
pci 0000:3f:0a.1: [8086:3cc1] type 0 class 0x000880
pci 0000:3f:0a.2: [8086:3cc2] type 0 class 0x000880
pci 0000:3f:0a.3: [8086:3cd0] type 0 class 0x000880
pci 0000:3f:0b.0: [8086:3ce0] type 0 class 0x000880
pci 0000:3f:0b.3: [8086:3ce3] type 0 class 0x000880
pci 0000:3f:0c.0: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0c.1: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0c.2: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0c.3: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0c.6: [8086:3cf4] type 0 class 0x000880
pci 0000:3f:0c.7: [8086:3cf6] type 0 class 0x000880
pci 0000:3f:0d.0: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0d.1: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0d.2: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0d.3: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0d.6: [8086:3cf5] type 0 class 0x000880
pci 0000:3f:0e.0: [8086:3ca0] type 0 class 0x000880
pci 0000:3f:0e.1: [8086:3c46] type 0 class 0x001101
pci 0000:3f:0f.0: [8086:3ca8] type 0 class 0x000880
pci 0000:3f:0f.1: [8086:3c71] type 0 class 0x000880
pci 0000:3f:0f.2: [8086:3caa] type 0 class 0x000880
pci 0000:3f:0f.3: [8086:3cab] type 0 class 0x000880
pci 0000:3f:0f.4: [8086:3cac] type 0 class 0x000880
pci 0000:3f:0f.5: [8086:3cad] type 0 class 0x000880
pci 0000:3f:0f.6: [8086:3cae] type 0 class 0x000880
pci 0000:3f:10.0: [8086:3cb0] type 0 class 0x000880
pci 0000:3f:10.1: [8086:3cb1] type 0 class 0x000880
pci 0000:3f:10.2: [8086:3cb2] type 0 class 0x000880
pci 0000:3f:10.3: [8086:3cb3] type 0 class 0x000880
pci 0000:3f:10.5: [8086:3cb5] type 0 class 0x000880
pci 0000:3f:10.6: [8086:3cb6] type 0 class 0x000880
pci 0000:3f:10.7: [8086:3cb7] type 0 class 0x000880
pci 0000:3f:11.0: [8086:3cb8] type 0 class 0x000880
pci 0000:3f:13.0: [8086:3ce4] type 0 class 0x000880
pci 0000:3f:13.1: [8086:3c43] type 0 class 0x001101
pci 0000:3f:13.4: [8086:3ce6] type 0 class 0x001101
pci 0000:3f:13.5: [8086:3c44] type 0 class 0x001101
pci 0000:3f:13.6: [8086:3c45] type 0 class 0x000880
pci0000:3f: Requesting ACPI _OSC control (0x15)
pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x15
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 7f])
pci 0000:7f:08.0: [8086:3c80] type 0 class 0x000880
pci 0000:7f:09.0: [8086:3c90] type 0 class 0x000880
pci 0000:7f:0a.0: [8086:3cc0] type 0 class 0x000880
pci 0000:7f:0a.1: [8086:3cc1] type 0 class 0x000880
pci 0000:7f:0a.2: [8086:3cc2] type 0 class 0x000880
pci 0000:7f:0a.3: [8086:3cd0] type 0 class 0x000880
pci 0000:7f:0b.0: [8086:3ce0] type 0 class 0x000880
pci 0000:7f:0b.3: [8086:3ce3] type 0 class 0x000880
pci 0000:7f:0c.0: [8086:3ce8] type 0 class 0x000880
pci 0000:7f:0c.1: [8086:3ce8] type 0 class 0x000880
pci 0000:7f:0c.2: [8086:3ce8] type 0 class 0x000880
pci 0000:7f:0c.3: [8086:3ce8] type 0 class 0x000880
pci 0000:7f:0c.6: [8086:3cf4] type 0 class 0x000880
pci 0000:7f:0c.7: [8086:3cf6] type 0 class 0x000880
pci 0000:7f:0d.0: [8086:3ce8] type 0 class 0x000880
pci 0000:7f:0d.1: [8086:3ce8] type 0 class 0x000880
pci 0000:7f:0d.2: [8086:3ce8] type 0 class 0x000880
pci 0000:7f:0d.3: [8086:3ce8] type 0 class 0x000880
pci 0000:7f:0d.6: [8086:3cf5] type 0 class 0x000880
pci 0000:7f:0e.0: [8086:3ca0] type 0 class 0x000880
pci 0000:7f:0e.1: [8086:3c46] type 0 class 0x001101
pci 0000:7f:0f.0: [8086:3ca8] type 0 class 0x000880
pci 0000:7f:0f.1: [8086:3c71] type 0 class 0x000880
pci 0000:7f:0f.2: [8086:3caa] type 0 class 0x000880
pci 0000:7f:0f.3: [8086:3cab] type 0 class 0x000880
pci 0000:7f:0f.4: [8086:3cac] type 0 class 0x000880
pci 0000:7f:0f.5: [8086:3cad] type 0 class 0x000880
pci 0000:7f:0f.6: [8086:3cae] type 0 class 0x000880
pci 0000:7f:10.0: [8086:3cb0] type 0 class 0x000880
pci 0000:7f:10.1: [8086:3cb1] type 0 class 0x000880
pci 0000:7f:10.2: [8086:3cb2] type 0 class 0x000880
pci 0000:7f:10.3: [8086:3cb3] type 0 class 0x000880
pci 0000:7f:10.5: [8086:3cb5] type 0 class 0x000880
pci 0000:7f:10.6: [8086:3cb6] type 0 class 0x000880
pci 0000:7f:10.7: [8086:3cb7] type 0 class 0x000880
pci 0000:7f:11.0: [8086:3cb8] type 0 class 0x000880
pci 0000:7f:13.0: [8086:3ce4] type 0 class 0x000880
pci 0000:7f:13.1: [8086:3c43] type 0 class 0x001101
pci 0000:7f:13.4: [8086:3ce6] type 0 class 0x001101
pci 0000:7f:13.5: [8086:3c44] type 0 class 0x001101
pci 0000:7f:13.6: [8086:3c45] type 0 class 0x000880
pci0000:7f: Requesting ACPI _OSC control (0x15)
pci0000:7f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x15
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 *6 7 11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 11 *14 15)
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009c000 - 000000000009ffff
reserve RAM buffer: 00000000bb2e0000 - 00000000bbffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3d]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0x1fff window]
pnp 00:00: [io 0x0000 window]
pnp 00:00: [io 0x0000 window]
pnp 00:00: [io 0x0000 window]
pnp 00:00: [io 0x8000-0x9fff window]
pnp 00:00: [io 0xa000-0xbfff window]
pnp 00:00: [io 0xc000-0xdfff window]
pnp 00:00: [io 0xe000-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xd8000000-0xdfffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0080-0x009f]
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x00f0-0x00ff]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io 0x0061]
system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: [io 0x0070-0x007f]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x02f8-0x02ff]
pnp 00:05: [irq 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io 0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x00e0-0x00e7]
pnp 00:07: [io 0x0880-0x08ff]
pnp 00:07: [io 0x0900-0x091f]
pnp 00:07: [io 0x0920-0x0923]
pnp 00:07: [io 0x0924]
pnp 00:07: [io 0x0370-0x0377]
pnp 00:07: [io 0x0ca0-0x0ca7]
pnp 00:07: [io 0x0ca9-0x0cab]
pnp 00:07: [io 0x0cad-0x0caf]
pnp 00:07: [io 0x0cb0-0x0cbf]
pnp 00:07: [io 0x0060-0x005f disabled]
pnp 00:07: [io 0x0064-0x0063 disabled]
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0880-0x08ff] has been reserved
system 00:07: [io 0x0900-0x091f] has been reserved
system 00:07: [io 0x0920-0x0923] has been reserved
system 00:07: [io 0x0924] has been reserved
system 00:07: [io 0x0370-0x0377] has been reserved
system 00:07: [io 0x0ca0-0x0ca7] has been reserved
system 00:07: [io 0x0ca9-0x0cab] has been reserved
system 00:07: [io 0x0cad-0x0caf] has been reserved
system 00:07: [io 0x0cb0-0x0cbf] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: [io 0x0ca8]
pnp 00:08: [io 0x0cac]
pnp 00:08: [irq 10]
system 00:08: [io 0x0ca8] has been reserved
system 00:08: [io 0x0cac] has been reserved
system 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:09: [mem 0xe0000000-0xe3efffff]
system 00:09: [mem 0xe0000000-0xe3efffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [bus 40-7e]
pnp 00:0a: [io 0x0000 window]
pnp 00:0a: [io 0x0000 window]
pnp 00:0a: [io 0x2000-0x3fff window]
pnp 00:0a: [io 0x4000-0x5fff window]
pnp 00:0a: [io 0x6000-0x7fff window]
pnp 00:0a: [io 0x0000 window]
pnp 00:0a: [io 0x0000 window]
pnp 00:0a: [io 0x0000 window]
pnp 00:0a: [io 0x0000 window]
pnp 00:0a: [mem 0x00000000 window]
pnp 00:0a: [mem 0x00000000 window]
pnp 00:0a: [mem 0x00000000 window]
pnp 00:0a: [mem 0xd0000000-0xd7ffffff window]
pnp 00:0a: [mem 0x00000000 window]
pnp 00:0a: [mem 0x00000000 window]
pnp 00:0a: [mem 0x00000000 window]
pnp 00:0a: [mem 0x00000000 window]
pnp 00:0a: [mem 0x00000000 window]
pnp 00:0a: [mem 0x00000000 window]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0b: [mem 0xe4000000-0xe7ffffff]
system 00:0b: [mem 0xe4000000-0xe7ffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [bus 3f]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0d: [mem 0xe3f00000-0xe3ffffff]
system 00:0d: [mem 0xe3f00000-0xe3ffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xdf100000-0xdf101fff]
system 00:0e: [mem 0xdf100000-0xdf101fff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0xd3000000-0xd3001fff]
system 00:0f: [mem 0xd3000000-0xd3001fff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:10: [bus 7f]
pnp 00:10: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:02:00.1: address space collision: [mem 0xdd000000-0xdd03ffff pref] conflicts with 0000:02:00.0 [mem 0xdd000000-0xdd03ffff pref]
PCI: max bus depth: 4 pci_try_num: 5
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0xffff]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:03.0: PCI bridge to [bus 08-08]
pci 0000:00:11.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
pci 0000:02:00.1: BAR 6: assigned [mem 0xd9000000-0xd903ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: bridge window [mem 0xdd000000-0xdd7fffff]
pci 0000:00:1c.4: bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06-06]
pci 0000:05:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:05:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-06]
pci 0000:04:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:04:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:01.0: PCI bridge to [bus 07-07]
pci 0000:04:01.0: bridge window [mem 0xdef00000-0xdeffffff]
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:03:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 03-07]
pci 0000:00:1c.7: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:00:1c.7: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
pci 0000:40:03.0: PCI bridge to [bus 41-41]
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:05:00.0: setting latency timer to 64
pci 0000:04:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:40:03.0: PCI INT A -> GSI 85 (level, low) -> IRQ 85
pci 0000:40:03.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0x1fff]
pci_bus 0000:00: resource 8 [io 0x8000-0x9fff]
pci_bus 0000:00: resource 9 [io 0xa000-0xbfff]
pci_bus 0000:00: resource 10 [io 0xc000-0xdfff]
pci_bus 0000:00: resource 11 [io 0xe000-0xffff]
pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 13 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdcffffff]
pci_bus 0000:02: resource 1 [mem 0xdd000000-0xdd7fffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd90fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdd800000-0xdeffffff]
pci_bus 0000:03: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xdd800000-0xdeffffff]
pci_bus 0000:04: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xdd800000-0xde7fffff]
pci_bus 0000:05: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xdd800000-0xde7fffff]
pci_bus 0000:06: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xdef00000-0xdeffffff]
pci_bus 0000:0b: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0b: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0b: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0b: resource 7 [io 0x0d00-0x1fff]
pci_bus 0000:0b: resource 8 [io 0x8000-0x9fff]
pci_bus 0000:0b: resource 9 [io 0xa000-0xbfff]
pci_bus 0000:0b: resource 10 [io 0xc000-0xdfff]
pci_bus 0000:0b: resource 11 [io 0xe000-0xffff]
pci_bus 0000:0b: resource 12 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 13 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:0b: resource 14 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:40: resource 4 [io 0x2000-0x3fff]
pci_bus 0000:40: resource 5 [io 0x4000-0x5fff]
pci_bus 0000:40: resource 6 [io 0x6000-0x7fff]
pci_bus 0000:40: resource 7 [mem 0xd0000000-0xd7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:06:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800b72e0000 - ffff8800bb2e0000
software IO TLB at phys 0xb72e0000 - 0xbb2e0000
audit: initializing netlink socket (disabled)
type=2000 audit(1403214806.140:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Freeing initrd memory: 14388k freed
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 106 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 107 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
pcieport 0000:00:11.0: irq 108 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 109 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 110 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c.7: irq 111 for MSI/MSI-X
pcieport 0000:40:03.0: setting latency timer to 64
pcieport 0000:40:03.0: irq 112 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pcieport 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pcieport 0000:40:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:40:03.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Refined TSC clocksource calibration: 2099.999 MHz.
Switching to clocksource tsc
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 113 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff100 irq 113
ata2: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff180 irq 113
ata3: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff200 irq 113
ata4: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff280 irq 113
ata5: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff300 irq 113
ata6: DUMMY
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xdf0fd000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fe000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5.00: ATAPI: PLDS DVD-ROM DS-8D3SH, HD51, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM PLDS DVD-ROM DS-8D3SH HD51 PQ: 0 ANSI: 5
Magic number: 2:994:904
rtc_cmos 00:04: setting system clock to 2014-06-19 21:53:28 UTC (1403214808)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1196k freed
udevd[221]: starting version 175
megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
megasas: 0x1000:0x0073:0x1028:0x1f51: bus 1:slot 0:func 0
megaraid_sas 0000:01:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
megaraid_sas 0000:01:00.0: setting latency timer to 64
megasas: FW now in Ready state
megaraid_sas 0000:01:00.0: irq 114 for MSI/MSI-X
tg3.c:v3.121 (November 2, 2011)
tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address d4:ae:52:90:fd:17
tg3 0000:02:00.0: eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
tg3 0000:02:00.1: setting latency timer to 64
tg3 0000:02:00.1: eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address d4:ae:52:90:fd:18
tg3 0000:02:00.1: eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
usb 1-1: new high-speed USB device number 2 using ehci_hcd
megasas_init_mfi: fw_support_ieee=67108864
megasas: INIT adapter done
scsi6 : LSI SAS based MegaRAID driver
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
scsi 6:0:0:0: Direct-Access ATA WDC WD1003FBYX-1 1V02 PQ: 0 ANSI: 5
scsi 6:0:1:0: Direct-Access ATA WDC WD1003FBYX-1 1V02 PQ: 0 ANSI: 5
scsi 6:0:32:0: Enclosure DP BP12G+ 1.00 PQ: 0 ANSI: 5
scsi 6:2:0:0: Direct-Access DELL PERC H310 2.12 PQ: 0 ANSI: 5
scsi 6:0:32:0: Attached scsi generic sg1 type 13
sd 6:2:0:0: [sda] 1952448512 512-byte logical blocks: (999 GB/931 GiB)
sd 6:2:0:0: Attached scsi generic sg2 type 0
sd 6:2:0:0: [sda] Write Protect is off
sd 6:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 6:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
sda: sda1 sda2 < sda5 >
sd 6:2:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ses 6:0:32:0: Attached Enclosure device
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
generic-usb 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.0-1.2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 6 ports detected
usb 1-1.6.1: new high-speed USB device number 5 using ehci_hcd
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/input/input2
generic-usb 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.1/input/input3
generic-usb 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.2/input/input4
generic-usb 0003:0624:0249.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input2
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[595]: starting version 175
lp: driver loaded but no devices found
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
ACPI Error: No handler for Region [SYSI] (ffff880bf14851b0) [IPMI] (20110623/evregion-373)
ACPI Error: Region IPMI (ID=7) has no handler (20110623/exfldio-292)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff880bf1484dc0), AE_NOT_EXIST (20110623/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff880bf1484d20), AE_NOT_EXIST (20110623/psparse-536)
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20110623/power_meter-773)
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 115 for MSI/MSI-X
Adding 100585468k swap on /dev/mapper/dellpocdev001-swap_1. Priority:-1 extents:1 across:100585468k
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0
EDAC MC1: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#1': DEV 0000:7f:0e.0
EDAC sbridge: Driver loaded.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
device-mapper: multipath: version 1.3.0 loaded
type=1400 audit(1403214814.650:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=821 comm="apparmor_parser"
type=1400 audit(1403214814.650:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=823 comm="apparmor_parser"
type=1400 audit(1403214814.650:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=821 comm="apparmor_parser"
type=1400 audit(1403214814.650:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=823 comm="apparmor_parser"
type=1400 audit(1403214814.650:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=821 comm="apparmor_parser"
type=1400 audit(1403214814.650:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=823 comm="apparmor_parser"
type=1400 audit(1403214814.654:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=902 comm="apparmor_parser"
type=1400 audit(1403214814.654:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=901 comm="apparmor_parser"
bonding: bond0: Setting MII monitoring interval to 100.
bonding: bond0: setting mode to 802.3ad (4).
bonding: bond0: Setting LACP rate to fast (1).
ADDRCONF(NETDEV_UP): bond0: link is not ready
bonding: bond0: Adding slave eth1.
tg3 0000:02:00.1: irq 116 for MSI/MSI-X
tg3 0000:02:00.1: irq 117 for MSI/MSI-X
tg3 0000:02:00.1: irq 118 for MSI/MSI-X
tg3 0000:02:00.1: irq 119 for MSI/MSI-X
tg3 0000:02:00.1: irq 120 for MSI/MSI-X
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 [email protected]).
bonding: bond0: enslaving eth1 as a backup interface with a down link.
bonding: bond0: Adding slave eth0.
tg3 0000:02:00.0: irq 121 for MSI/MSI-X
tg3 0000:02:00.0: irq 122 for MSI/MSI-X
tg3 0000:02:00.0: irq 123 for MSI/MSI-X
tg3 0000:02:00.0: irq 124 for MSI/MSI-X
tg3 0000:02:00.0: irq 125 for MSI/MSI-X
bonding: bond0: enslaving eth0 as a backup interface with a down link.
init: failsafe main process (1145) killed by TERM signal
type=1400 audit(1403214816.998:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1552 comm="apparmor_parser"
type=1400 audit(1403214816.998:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1552 comm="apparmor_parser"
Bridge firewalling registered
init: udev-fallback-graphics main process (1720) terminated with status 1
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex.
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
init: tty1 main process (1845) killed by INT signal
init: tty1 main process ended, respawning
bond0: no IPv6 routers present
show_signal_msg: 15 callbacks suppressed
nscd[1625]: segfault at 0 ip 00007f7dcd8243e1 sp 00007f7dc45135c8 error 4 in libc-2.15.so[7f7dcd6c3000+1b3000]
init: tty1 main process ended, respawning
bonding: bond0: Removing slave eth1.
bonding: bond0: Warning: the permanent HWaddr of eth1 - d4:ae:52:90:fd:18 - is still in use by bond0. Set the HWaddr of eth1 to a different address to avoid conflicts.
bonding: bond0: releasing backup interface eth1
bonding: bond0: Adding slave eth1.
tg3 0000:02:00.1: irq 116 for MSI/MSI-X
tg3 0000:02:00.1: irq 117 for MSI/MSI-X
tg3 0000:02:00.1: irq 118 for MSI/MSI-X
tg3 0000:02:00.1: irq 119 for MSI/MSI-X
tg3 0000:02:00.1: irq 120 for MSI/MSI-X
bonding: bond0: enslaving eth1 as a backup interface with a down link.
tg3 0000:02:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:02:00.1: eth1: EEE is disabled
bonding: bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
tg3 0000:02:00.1: eth1: Link is down
bonding: bond0: link status definitely down for interface eth1, disabling it
tg3 0000:02:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:02:00.1: eth1: EEE is disabled
bonding: bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.