dmesg - Xonotic_1080_all_2014-06-13
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-30-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #54-Ubuntu SMP Mon Jun 9 22:45:01 UTC 2014 (Ubuntu 3.13.0-30.54-generic 3.13.11.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000096fff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfceffff] usable
BIOS-e820: [mem 0x00000000cfcf0000-0x00000000cfcf0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfcf1000-0x00000000cfcfffff] ACPI data
BIOS-e820: [mem 0x00000000cfd00000-0x00000000cfdfffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS FB 05/17/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFD00000 mask FFFFFFF00000 uncachable
4 base 0000CFE00000 mask FFFFFFE00000 uncachable
5 base 000100000000 mask FFFF00000000 write-back
6 base 000200000000 mask FFFF00000000 write-back
7 base 000300000000 mask FFFFE0000000 write-back
TOM2: 0000000330000000 aka 13056M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 4GB, type WB
reg 7, base: 12GB, range: 512MB, type WB
total RAM covered: 3325M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
e820: update [mem 0xcfd00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4450-0x000f445f] mapped at [ffff8800000f4450]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000091000] 91000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x32fe00000-0x32fffffff]
[mem 0x32fe00000-0x32fffffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x32c000000-0x32fdfffff]
[mem 0x32c000000-0x32fdfffff] page 2M
init_memory_mapping: [mem 0x300000000-0x32bffffff]
[mem 0x300000000-0x32bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfceffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfceffff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 1G
RAMDISK: [mem 0x34ba2000-0x365c8fff]
ACPI: RSDP 00000000000f5df0 000014 (v00 GBT )
ACPI: RSDT 00000000cfcf1000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfcf1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfcf1100 0076F9 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfcf0000 000040
ACPI: SSDT 00000000cfcf88c0 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000cfcf9180 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfcf91c0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000cfcf9200 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000cfcf9270 00048A (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 00000000cfcf8800 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
Initmem setup node 0 [mem 0x00000000-0x32fffffff]
NODE_DATA [mem 0x32fff9000-0x32fffdfff]
[ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x32fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00096fff]
node 0: [mem 0x00100000-0xcfceffff]
node 0: [mem 0x100000000-0x32fffffff]
On node 0 totalpages: 3144838
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3990 pages, LIFO batch:0
DMA32 zone: 13236 pages used for memmap
DMA32 zone: 847088 pages, LIFO batch:31
Normal zone: 35840 pages used for memmap
Normal zone: 2293760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00097000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfcf0000-0xcfcf0fff]
PM: Registered nosave memory: [mem 0xcfcf1000-0xcfcfffff]
PM: Registered nosave memory: [mem 0xcfd00000-0xcfdfffff]
PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88032fc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095677
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 3afc000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 12206816K/12579352K available (7356K kernel code, 1142K rwdata, 3396K rodata, 1332K init, 1440K bss, 372536K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3415.140 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.28 BogoMIPS (lpj=13660560)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6c000 - ffffffff81e74000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28465 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (fam: 10, model: 04, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU1
process: Switch to broadcast mode on CPU2
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27321.12 BogoMIPS)
process: Switch to broadcast mode on CPU3
process: Switch to broadcast mode on CPU0
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfcf0000-0xcfcf0fff] (4096 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 21:20:38, date: 06/12/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [a000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
TOM2: 0000000330000000 aka 13056M
bus: [bus 00-05] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xe0600000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe05fffff]
bus: 00 [mem 0x330000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0xBE, should be 0xBD (20131115/tbprint-214)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe02d000-0xfe02d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe02b000-0xfe02b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe029000-0xfe029fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe028000-0xfe0280ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:6819] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfde80000-0xfdebffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xde00-0xdeff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfdefc000-0xfdefffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfdbfe000-0xfdbfffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
pci 0000:04:0e.0: reg 0x10: [mem 0xfddff000-0xfddff7ff]
pci 0000:04:0e.0: reg 0x14: [mem 0xfddf8000-0xfddfbfff]
pci 0000:04:0e.0: supports D1 D2
pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
pci 0000:05:00.0: [197b:2363] type 00 class 0x010185
pci 0000:05:00.0: reg 0x24: [mem 0xfdafe000-0xfdafffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.1: [197b:2363] type 00 class 0x010185
pci 0000:05:00.1: reg 0x10: [io 0xaf00-0xaf07]
pci 0000:05:00.1: reg 0x14: [io 0xae00-0xae03]
pci 0000:05:00.1: reg 0x18: [io 0xad00-0xad07]
pci 0000:05:00.1: reg 0x1c: [io 0xac00-0xac03]
pci 0000:05:00.1: reg 0x20: [io 0xab00-0xab0f]
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x00097000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfcf0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:01: [io 0x4100-0x411f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x4000-0x40fe] could not be reserved
system 00:01: [io 0x4210-0x4217] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:09: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0xcfd00000-0xcfdfffff] has been reserved
system 00:09: [mem 0xcfe00000-0xcfefffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26780K (ffff880034ba2000 - ffff8800365c9000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000b6
microcode: CPU1: patch_level=0x010000b6
microcode: CPU2: patch_level=0x010000b6
microcode: CPU3: patch_level=0x010000b6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1402608038.892:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 24022
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02d000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe02b000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe028000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe02e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe02a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfe029000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-30-generic xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-30-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: ac244bd3595520e48dacc7db4a170331cc248d65'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:401:348
rtc_cmos 00:03: setting system clock to 2014-06-12 21:20:39 UTC (1402608039)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1f000 - ffffffff81e6c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 824K (ffff880001732000 - ffff880001800000)
Freeing unused kernel memory: 700K (ffff880001b51000 - ffff880001c00000)
systemd-udevd[125]: starting version 204
wmi: Mapper loaded
Floppy drive(s): fd0 is 1.44M
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 48 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc900018be000, 6c:f0:49:ed:6b:96, XID 083000c0 IRQ 48
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 49 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 49
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 49
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 49
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 49
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 49
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 49
pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001)
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
ata8: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6819 0x174B:0xE218).
[drm] register mmio base: 0xFDE80000
[drm] register mmio size: 262144
ATOM BIOS: C40304
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 6151218 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading PITCAIRN Microcode
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[drm] PCIE gen 2 link speeds already enabled
FDC 0 is a post-1991 82077
[drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880318704c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880318704c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880318704c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880318704c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880318704c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90012535a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 50 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 17
ata10: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 17
firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
ata7.00: ATA-7: ST3320620A, 3.AAD, max UDMA/100
ata7.00: 625142448 sectors, multi 16: LBA48
ata7.00: configured for UDMA/100
usb 7-3: new low-speed USB device number 2 using ohci-pci
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3415.035 MHz
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] Enabling audio 2 support
[drm] Enabling audio 3 support
[drm] Enabling audio 4 support
[drm] Enabling audio 5 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 1 usecs
usb 7-3: New USB device found, idVendor=6666, idProduct=8801
usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-3: Product: TigerGame PS/PS2 Game Controller Adapter
usb 7-3: Manufacturer: WiseGroup.,Ltd
hidraw: raw HID events driver (C) Jiri Kosina
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: SAMSUNG SP1614C, SW100-30, max UDMA7
ata3.00: 312581808 sectors, multi 0: LBA48
ata3.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata2.00: ATA-8: WDC WD10EALS-00Z8A0, 05.01D05, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD10EALS-00Z 05.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1614C SW10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] Attached SCSI disk
ata6.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg3 type 5
scsi 6:0:0:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5
sd 6:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD5
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 1022:9603 = 300d02/0
ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
sdd: sdd1 sdd2 sdd3 sdd4
sd 6:0:0:0: [sdd] Attached SCSI disk
sda: [LDM] sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
usb 4-1: new low-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=046d, idProduct=c01d
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB-PS/2 Optical Mouse
usb 4-1: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input3
hid-generic 0003:046D:C01D.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0
random: nonblocking pool is initialized
firewire_core 0000:04:0e.0: created device fw0: GUID 00ec05c6006cf049, S400
usb 4-2: new low-speed USB device number 3 using ohci-pci
usb 4-2: New USB device found, idVendor=1006, idProduct=0022
usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-2: Product: USB Keyboard
input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input4
hid-generic 0003:1006:0022.0003: input,hidraw1: USB HID v1.11 Keyboard [USB Keyboard ] on usb-0000:00:12.0-2/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/input/input5
hid-generic 0003:1006:0022.0004: input,hidraw2: USB HID v1.11 Keyboard [USB Keyboard ] on usb-0000:00:12.0-2/input1
Switched to clocksource tsc
usb 9-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 9-1: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 9-1: New USB device found, idVendor=1058, idProduct=1042
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 9-1: Product: Elements 1042
usb 9-1: Manufacturer: Western Digital
usb 9-1: SerialNumber: 575837314139315839383733
usb-storage 9-1:1.0: USB Mass Storage device detected
scsi10 : usb-storage 9-1:1.0
usbcore: registered new interface driver usb-storage
[drm] radeon: dpm initialized
[drm] fb mappable at 0xD1480000
[drm] vram apper at 0xD0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
scsi 10:0:0:0: Direct-Access WD Elements 1042 1007 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sde] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
sd 10:0:0:0: [sde] Write Protect is off
sd 10:0:0:0: [sde] Mode Sense: 47 00 10 08
sd 10:0:0:0: [sde] No Caching mode page found
sd 10:0:0:0: [sde] Assuming drive cache: write through
sd 10:0:0:0: [sde] No Caching mode page found
sd 10:0:0:0: [sde] Assuming drive cache: write through
Console: switching to colour frame buffer device 200x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
sde: sde1
sd 10:0:0:0: [sde] No Caching mode page found
sd 10:0:0:0: [sde] Assuming drive cache: write through
sd 10:0:0:0: [sde] Attached SCSI disk
Adding 2104476k swap on /dev/sdd1. Priority:-1 extents:1 across:2104476k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[354]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x41
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc900018d4b00). heartbeat=60 sec (nowayout=0)
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
type=1400 audit(1402608053.761:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=468 comm="apparmor_parser"
type=1400 audit(1402608053.761:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=468 comm="apparmor_parser"
type=1400 audit(1402608053.761:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=468 comm="apparmor_parser"
type=1400 audit(1402608053.761:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=448 comm="apparmor_parser"
type=1400 audit(1402608053.761:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=448 comm="apparmor_parser"
type=1400 audit(1402608053.761:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=448 comm="apparmor_parser"
type=1400 audit(1402608053.761:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=468 comm="apparmor_parser"
type=1400 audit(1402608053.761:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=468 comm="apparmor_parser"
type=1400 audit(1402608053.761:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=448 comm="apparmor_parser"
type=1400 audit(1402608053.761:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=448 comm="apparmor_parser"
input: WiseGroup.,Ltd TigerGame PS/PS2 Game Controller Adapter as /devices/pci0000:00/0000:00:16.0/usb7/7-3/7-3:1.0/input/input20
smartjoyplus 0003:6666:8801.0001: input,hidraw3: USB HID v1.00 Joystick [WiseGroup.,Ltd TigerGame PS/PS2 Game Controller Adapter] on usb-0000:00:16.0-3/input0
smartjoyplus 0003:6666:8801.0001: Force feedback for SmartJoy PLUS PS2/USB adapter
EXT4-fs (sdd2): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (715) killed by TERM signal
audit_printk_skb: 6 callbacks suppressed
type=1400 audit(1402608061.489:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=843 comm="apparmor_parser"
type=1400 audit(1402608061.489:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=843 comm="apparmor_parser"
type=1400 audit(1402608061.489:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=843 comm="apparmor_parser"
type=1400 audit(1402608061.489:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=843 comm="apparmor_parser"
type=1400 audit(1402608061.489:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=843 comm="apparmor_parser"
type=1400 audit(1402608061.489:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=842 comm="apparmor_parser"
type=1400 audit(1402608061.489:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=842 comm="apparmor_parser"
type=1400 audit(1402608061.489:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=843 comm="apparmor_parser"
type=1400 audit(1402608061.489:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=842 comm="apparmor_parser"
type=1400 audit(1402608061.493:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=848 comm="apparmor_parser"
init: cups main process (861) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: samba-ad-dc main process (1154) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1197) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 78 callbacks suppressed
type=1400 audit(1402608088.017:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2145 comm="apparmor_parser"
type=1400 audit(1402608088.017:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2145 comm="apparmor_parser"
type=1400 audit(1402608088.017:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2145 comm="apparmor_parser"