dmesg - StreamTest
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-27-generic (buildd@akateko) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #50-Ubuntu SMP Thu May 15 18:06:16 UTC 2014 (Ubuntu 3.13.0-27.50-generic 3.13.11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b7f9ffff] usable
BIOS-e820: [mem 0x00000000b7fa0000-0x00000000b7fadfff] ACPI data
BIOS-e820: [mem 0x00000000b7fae000-0x00000000b7fcffff] ACPI NVS
BIOS-e820: [mem 0x00000000b7fd0000-0x00000000b7ffffff] reserved
BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M2A74-AM SE, BIOS 1403 09/20/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xb7fa0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFE0000000 write-back
2 base 00A0000000 mask FFF0000000 write-back
3 base 00B0000000 mask FFF8000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0xb7c00000-0xb7dfffff]
[mem 0xb7c00000-0xb7dfffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xb4000000-0xb7bfffff]
[mem 0xb4000000-0xb7bfffff] page 2M
init_memory_mapping: [mem 0x80000000-0xb3ffffff]
[mem 0x80000000-0xb3ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7fffffff] page 2M
init_memory_mapping: [mem 0xb7e00000-0xb7f9ffff]
[mem 0xb7e00000-0xb7f9ffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
RAMDISK: [mem 0x35b80000-0x36db7fff]
ACPI: RSDP 00000000000fc020 000014 (v00 ACPIAM)
ACPI: RSDT 00000000b7fa0000 00003C (v01 092010 RSDT0948 20100920 MSFT 00000097)
ACPI: FACP 00000000b7fa0200 000084 (v01 092010 FACP0948 20100920 MSFT 00000097)
ACPI: DSDT 00000000b7fa0450 006E94 (v01 A1266 A1266001 00000001 INTL 20060113)
ACPI: FACS 00000000b7fae000 000040
ACPI: APIC 00000000b7fa0390 00007C (v01 092010 APIC0948 20100920 MSFT 00000097)
ACPI: MCFG 00000000b7fa0410 00003C (v01 092010 OEMMCFG 20100920 MSFT 00000097)
ACPI: OEMB 00000000b7fae040 000071 (v01 092010 OEMB0948 20100920 MSFT 00000097)
ACPI: SRAT 00000000b7fa72f0 0000A0 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000b7fa7390 000038 (v01 092010 OEMHPET 20100920 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xb7f9ffff] -> [mem 0x00000000-0xb7f9ffff]
Initmem setup node 0 [mem 0x00000000-0xb7f9ffff]
NODE_DATA [mem 0xb7f9b000-0xb7f9ffff]
[ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4600000-ffff8800b73fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xb7f9ffff]
On node 0 totalpages: 753469
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11711 pages used for memmap
DMA32 zone: 749472 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
e820: [mem 0xb8000000-0xff6fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8800b7a00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 741673
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 1f6000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2930796K/3013876K available (7354K kernel code, 1142K rwdata, 3396K rodata, 1332K init, 1440K bss, 83080K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-5.
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 12058624 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3116.959 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 6233.91 BogoMIPS (lpj=12467836)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6c000 - ffffffff81e74000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28458 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (fam: 0f, model: 6b, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (12451.61 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xb7fae000-0xb7fcffff] (139264 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:37:40, date: 06/06/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [f0000000, f7feffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [c0000000, dfffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f7ff0000, ffffffff]
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xc0000000-0xfcffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xb8000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1002:7911] type 00 class 0x060000
pci 0000:00:01.0: [1002:7912] type 01 class 0x060400
pci 0000:00:06.0: [1002:7916] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfbcff800-0xfbcffbff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfbcfe000-0xfbcfefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfbcfd000-0xfbcfdfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfbcff000-0xfbcff0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfbcfc000-0xfbcfcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfbcfb000-0xfbcfbfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfbcfa800-0xfbcfa8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfbcf4000-0xfbcf7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfbcf9000-0xfbcf9fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:05.0: [1002:796e] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:05.0: reg 0x18: [mem 0xfbef0000-0xfbefffff 64bit]
pci 0000:01:05.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:01:05.0: reg 0x24: [mem 0xfbd00000-0xfbdfffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfafff000-0xfaffffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfafe0000-0xfafeffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xfbff0000-0xfbffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:06.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xb8000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xb7fa0000-0xb7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0b00-0x0b3f] has been reserved
system 00:07: [io 0x0800-0x089f] could not be reserved
system 00:07: [io 0x0b20-0x0b2f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:07: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0xb7ffffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:06.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xb8000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xb8000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18656K (ffff880035b80000 - ffff880036db8000)
microcode: AMD CPU family 0xf not supported
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1402051060.048:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 5760
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1152x864x32, linelength=4608, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90010780000, using 3904k, total 3904k
Console: switching to colour frame buffer device 144x54
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfbcff000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-27-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfbcfa800
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-27-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfbcfe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-27-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfbcfd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-27-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfbcfc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-27-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfbcfb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-27-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfbcf9000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-27-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 23984ac203784325ccf7b95b51f6c119380eb933'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:91:628
rtc_cmos 00:01: setting system clock to 2014-06-06 10:37:41 UTC (1402051061)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1f000 - ffffffff81e6c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 828K (ffff880001731000 - ffff880001800000)
Freeing unused kernel memory: 700K (ffff880001b51000 - ffff880001c00000)
systemd-udevd[109]: starting version 204
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 41 for MSI/MSI-X
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfbcff800 port 0xfbcffa80 irq 22
r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000064c000, 90:e6:ba:30:a0:e2, XID 04a00000 IRQ 41
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 1-6: new high-speed USB device number 4 using ehci-pci
usb 1-6: New USB device found, idVendor=0bda, idProduct=8176
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: 802.11n WLAN Adapter
usb 1-6: Manufacturer: 802.11n WLPN Adapter
usb 1-6: SerialNumber: 00e04c000001
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata3: softreset failed (device not ready)
ata3: applying PMP SRST workaround and retrying
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
ata3.00: configured for UDMA/100
usb 2-1: New USB device found, idVendor=058f, idProduct=6362
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Mass Storage Device
usb 2-1: Manufacturer: Generic
usb 2-1: SerialNumber: 058F312D81B
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL01 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
usb 4-1: new low-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=045e, idProduct=002d
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Microsoft Internet Keyboard
usb 4-1: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft Internet Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input5
hid-generic 0003:045E:002D.0001: input,hidraw0: USB HID v1.10 Keyboard [Microsoft Microsoft Internet Keyboard] on usb-0000:00:12.1-1/input0
input: Microsoft Microsoft Internet Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input6
hid-generic 0003:045E:002D.0002: input,hidraw1: USB HID v1.10 Device [Microsoft Microsoft Internet Keyboard] on usb-0000:00:12.1-1/input1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-3: new low-speed USB device number 2 using ohci-pci
usb 3-3: New USB device found, idVendor=046d, idProduct=c050
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB-PS/2 Optical Mouse
usb 3-3: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input7
hid-generic 0003:046D:C050.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-3/input0
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
random: init urandom read with 103 bits of entropy available
init: plymouth-upstart-bridge main process (177) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (190) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (192) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
random: nonblocking pool is initialized
Adding 4320252k swap on /dev/sda2. Priority:-1 extents:1 across:4320252k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[295]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
checking generic (f0000000 3d0000) vs hw (f0000000 8000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RS740 0x1002:0x796E 0x1043:0x835B).
[drm] register mmio base: 0xFBEF0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 128M 0x00000000B8000000 - 0x00000000BFFFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1476172 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x000000008E780000).
type=1400 audit(1402051072.675:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=349 comm="apparmor_parser"
type=1400 audit(1402051072.675:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=349 comm="apparmor_parser"
type=1400 audit(1402051072.675:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
type=1400 audit(1402051072.675:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=349 comm="apparmor_parser"
type=1400 audit(1402051072.675:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
type=1400 audit(1402051072.675:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xffff88008f16b000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading RS690/RS740 Microcode
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3a
sp5100_tco: failed to find MMIO address, giving up.
MCE: In-kernel MCE decoding enabled.
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revF or later detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 1024MB 1: 0MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 1024MB 5: 1024MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: CS0: Unbuffered DDR2 RAM
EDAC amd64: CS4: Unbuffered DDR2 RAM
EDAC amd64: CS5: Unbuffered DDR2 RAM
EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[drm] radeon: ring at 0x0000000080001000
[drm] ring test succeeded in 1 usecs
[drm] Enabling audio 0 support
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD2
[drm] DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c
[drm] Encoders:
[drm] DFP2: INTERNAL_DDI
[drm] Connector 2:
[drm] HDMI-A-1
[drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_LVTM1
[drm] fb mappable at 0xF0040000
[drm] vram apper at 0xF0000000
[drm] size 5300224
[drm] fb depth is 24
[drm] pitch is 5888
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0
kvm: disabled by bios
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4005c603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005c603 for NID 0x1d
realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0662
cfg80211: Calling CRDA to update world regulatory domain
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
rtl8192cu: Chip version 0x10
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192cu: MAC address: 00:9c:95:9a:23:73
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
usbcore: registered new interface driver rtl8192cu
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (659) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1402051076.227:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=771 comm="apparmor_parser"
type=1400 audit(1402051076.227:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=771 comm="apparmor_parser"
type=1400 audit(1402051076.227:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=771 comm="apparmor_parser"
type=1400 audit(1402051076.319:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=828 comm="apparmor_parser"
init: cups main process (778) killed by HUP signal
init: cups main process ended, respawning
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 2 device(s) ...
Adding 738084k swap on /dev/zram0. Priority:5 extents:1 across:738084k SSFS
Adding 738084k swap on /dev/zram1. Priority:5 extents:1 across:738084k SSFS
init: plymouth-upstart-bridge main process (195) killed by TERM signal
wlan0: authenticate with 00:26:5b:a4:a1:78
wlan0: send auth to 00:26:5b:a4:a1:78 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:5b:a4:a1:78 (try 1/3)
wlan0: RX AssocResp from 00:26:5b:a4:a1:78 (capab=0xc11 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
audit_printk_skb: 150 callbacks suppressed
type=1400 audit(1402051107.781:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2980 comm="apparmor_parser"
type=1400 audit(1402051107.781:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2980 comm="apparmor_parser"
type=1400 audit(1402051107.781:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2980 comm="apparmor_parser"
systemd-hostnamed[3754]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
type=1400 audit(1402051509.352:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6564 comm="apparmor_parser"
type=1400 audit(1402051509.352:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6564 comm="apparmor_parser"
type=1400 audit(1402051509.352:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6564 comm="apparmor_parser"
usb 1-5: new high-speed USB device number 5 using ehci-pci
usb 1-5: New USB device found, idVendor=04e8, idProduct=6860
usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-5: Product: GT-P3100
usb 1-5: Manufacturer: samsung
usb 1-5: SerialNumber: c08089a08b720af
usb 1-5: USB disconnect, device number 5
usb 1-5: new high-speed USB device number 6 using ehci-pci
usb 1-5: New USB device found, idVendor=04e8, idProduct=6860
usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-5: Product: GT-P3100
usb 1-5: Manufacturer: samsung
usb 1-5: SerialNumber: c08089a08b720af
systemd-hostnamed[8090]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-5: USB disconnect, device number 6
wlan0: Connection to AP 00:26:5b:a4:a1:78 lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:5b:a4:a1:78
wlan0: send auth to 00:26:5b:a4:a1:78 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:5b:a4:a1:78 (try 1/3)
wlan0: RX AssocResp from 00:26:5b:a4:a1:78 (capab=0xc11 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 1-6: USB disconnect, device number 4
wlan0: deauthenticating from 00:26:5b:a4:a1:78 by local choice (reason=3)
rtl_usb: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x20
rtl_usb: reg 0x422, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x420000
rtl_usb: reg 0x542, usbctrl_vendorreq TimeOut! status:0xffffffed value=0xd38000
rtl_usb: reg 0x608, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x2b3
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-6: new high-speed USB device number 7 using ehci-pci
usb 1-6: New USB device found, idVendor=0bda, idProduct=8176
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: 802.11n WLAN Adapter
usb 1-6: Manufacturer: 802.11n WLPN Adapter
usb 1-6: SerialNumber: 00e04c000001
rtl8192cu: Chip version 0x10
rtl8192cu: MAC address: 00:9c:95:9a:23:73
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:26:5b:a4:a1:78
wlan0: send auth to 00:26:5b:a4:a1:78 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:5b:a4:a1:78 (try 1/3)
wlan0: RX AssocResp from 00:26:5b:a4:a1:78 (capab=0xc11 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
systemd-hostnamed[24211]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!