dmesg - miner2

Return To miner2 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.12.6-031206-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201312201218 SMP Fri Dec 20 17:20:06 UTC 2013
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007c8eafff] usable
BIOS-e820: [mem 0x000000007c8eb000-0x000000007ceccfff] reserved
BIOS-e820: [mem 0x000000007cecd000-0x000000007d1e3fff] ACPI NVS
BIOS-e820: [mem 0x000000007d1e4000-0x000000007d347fff] reserved
BIOS-e820: [mem 0x000000007d348000-0x000000007d348fff] usable
BIOS-e820: [mem 0x000000007d349000-0x000000007d3cefff] ACPI NVS
BIOS-e820: [mem 0x000000007d3cf000-0x000000007d7fffff] usable
BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X79 Extreme9, BIOS P3.60 07/24/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D7FFF write-protect
  D8000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask 3FF000000000 write-back
  1 base 001000000000 mask 3FFF80000000 write-back
  2 base 00007E000000 mask 3FFFFE000000 uncachable
  3 base 000080000000 mask 3FFF80000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 64GB, range: 2GB, type WB
reg 2, base: 2016MB, range: 32MB, type UC
reg 3, base: 2GB, range: 2GB, type UC
total RAM covered: 65504M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2016MB, range: 32MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
reg 5, base: 32GB, range: 32GB, type WB
reg 6, base: 64GB, range: 2GB, type WB
e820: update [mem 0x7e000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7d800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x107fe00000-0x107fffffff]
 [mem 0x107fe00000-0x107fffffff] page 1G
init_memory_mapping: [mem 0x107c000000-0x107fdfffff]
 [mem 0x107c000000-0x107fdfffff] page 1G
init_memory_mapping: [mem 0x1000000000-0x107bffffff]
 [mem 0x1000000000-0x107bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x7c8eafff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x7c7fffff] page 2M
 [mem 0x7c800000-0x7c8eafff] page 4k
init_memory_mapping: [mem 0x7d348000-0x7d348fff]
 [mem 0x7d348000-0x7d348fff] page 4k
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x7d3cf000-0x7d7fffff]
 [mem 0x7d3cf000-0x7d3fffff] page 4k
 [mem 0x7d400000-0x7d7fffff] page 2M
init_memory_mapping: [mem 0x100000000-0xfffffffff]
 [mem 0x100000000-0xfffffffff] page 1G
RAMDISK: [mem 0x35b8a000-0x36dbcfff]
Reserving 128MB of memory at 720MB for crashkernel (System RAM: 65484MB)
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 000000007d104080 00084 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 000000007d10dc10 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
ACPI: DSDT 000000007d1041a0 09A69 (v02 ALASKA    A M I 00000000 INTL 20051117)
ACPI: FACS 000000007d1e1f80 00040
ACPI: APIC 000000007d10dd08 000C8 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FPDT 000000007d10ddd0 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 000000007d10de18 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: AAFT 000000007d10de58 000BA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: HPET 000000007d10df18 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
ACPI: SSDT 000000007d10df50 CD380 (v02  INTEL    CpuPm 00004000 INTL 20051117)
ACPI: EINJ 000000007d1db2d0 00130 (v01    AMI AMI EINJ 00000000      00000000)
ACPI: ERST 000000007d1db400 00210 (v01  AMIER AMI ERST 00000000      00000000)
ACPI: HEST 000000007d1db610 000A8 (v01    AMI AMI HEST 00000000      00000000)
ACPI: BERT 000000007d1db6b8 00030 (v01    AMI AMI BERT 00000000      00000000)
ACPI: DMAR 000000007d1db6e8 000BC (v01 A M I   OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000107fffffff]
Initmem setup node 0 [mem 0x00000000-0x107fffffff]
  NODE_DATA [mem 0x107fff9000-0x107fffdfff]
 [ffffea0000000000-ffffea0041ffffff] PMD -> [ffff88103f600000-ffff88107f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x107fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0x7c8eafff]
  node   0: [mem 0x7d348000-0x7d348fff]
  node   0: [mem 0x7d3cf000-0x7d7fffff]
  node   0: [mem 0x100000000-0x107fffffff]
On node 0 totalpages: 16764090
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 7925 pages used for memmap
  DMA32 zone: 507165 pages, LIFO batch:31
  Normal zone: 253952 pages used for memmap
  Normal zone: 16252928 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7c8eb000-0x7ceccfff]
PM: Registered nosave memory: [mem 0x7cecd000-0x7d1e3fff]
PM: Registered nosave memory: [mem 0x7d1e4000-0x7d347fff]
PM: Registered nosave memory: [mem 0x7d349000-0x7d3cefff]
PM: Registered nosave memory: [mem 0x7d800000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7d800000-0xcfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88107fc00000 s86592 r8192 d24000 u262144
pcpu-alloc: s86592 r8192 d24000 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16502128
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65774464K/67056360K available (7544K kernel code, 1119K rwdata, 3516K rodata, 1344K init, 1416K bss, 1281896K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1152 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3599.899 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.79 BogoMIPS (lpj=14399596)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 16 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e69000 - ffffffff81e70000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 31065 entries in 122 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x0000007ce80000 end: 0x0000007ceaafff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 0 under DRHD base  0xfbffc000 IOMMU 0
IOAPIC id 2 under DRHD base  0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #   1 #   2 #   3 #   4 #   5 #   6 #   7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (57598.38 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7cecd000-0x7d1e3fff] (3239936 bytes)
PM: Registering ACPI NVS region [mem 0x7d349000-0x7d3cefff] (548864 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time:  6:44:06, date: 06/01/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f 
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x11) granted
ACPI: \_SB_.PCI0.IOH_: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.VTDR: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.PCH_: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.CWDT: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.HPET: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x8c000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf09000-0xfbf09fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf08000-0xfbf0800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf07000-0xfbf073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf06000-0xfbf063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf05000-0xfbf057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf04000-0xfbf040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [1002:67b0] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xc0000000-0xc07fffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x24: [mem 0xfbe00000-0xfbe3ffff]
pci 0000:03:00.0: reg 0x30: [mem 0xfbe40000-0xfbe5ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.1: [1002:aac8] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbe60000-0xfbe63fff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0:   bridge window [mem 0xb0000000-0xc07fffff 64bit pref]
pci 0000:04:00.0: [1002:67b0] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:04:00.0: reg 0x18: [mem 0xa0000000-0xa07fffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [io  0xd000-0xd0ff]
pci 0000:04:00.0: reg 0x24: [mem 0xfbd00000-0xfbd3ffff]
pci 0000:04:00.0: reg 0x30: [mem 0xfbd40000-0xfbd5ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot
pci 0000:04:00.1: [1002:aac8] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xfbd60000-0xfbd63fff 64bit]
pci 0000:04:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:03.0:   bridge window [mem 0x90000000-0xa07fffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xc0a10000-0xc0a1ffff 64bit pref]
pci 0000:06:00.0: reg 0x18: [mem 0xc0a00000-0xc0a0ffff 64bit pref]
pci 0000:06:00.0: reg 0x30: [mem 0xfbc00000-0xfbc007ff pref]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.0:   bridge window [mem 0xc0a00000-0xc0afffff 64bit pref]
pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:07:00.0: reg 0x10: [io  0xc040-0xc047]
pci 0000:07:00.0: reg 0x14: [io  0xc030-0xc033]
pci 0000:07:00.0: reg 0x18: [io  0xc020-0xc027]
pci 0000:07:00.0: reg 0x1c: [io  0xc010-0xc013]
pci 0000:07:00.0: reg 0x20: [io  0xc000-0xc00f]
pci 0000:07:00.0: reg 0x24: [mem 0xfbb10000-0xfbb101ff]
pci 0000:07:00.0: reg 0x30: [mem 0xfbb00000-0xfbb0ffff pref]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:08:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io  0xb040-0xb047]
pci 0000:08:00.0: reg 0x14: [io  0xb030-0xb033]
pci 0000:08:00.0: reg 0x18: [io  0xb020-0xb027]
pci 0000:08:00.0: reg 0x1c: [io  0xb010-0xb013]
pci 0000:08:00.0: reg 0x20: [io  0xb000-0xb00f]
pci 0000:08:00.0: reg 0x24: [mem 0xfba10000-0xfba101ff]
pci 0000:08:00.0: reg 0x30: [mem 0xfba00000-0xfba0ffff pref]
pci 0000:08:00.0: PME# supported from D3hot
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:09:00.0: [10b5:8605] type 01 class 0x060400
pci 0000:09:00.0: reg 0x10: [mem 0xfb600000-0xfb603fff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 09-0d]
pci 0000:00:1c.3:   bridge window [io  0x8000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xfb300000-0xfb6fffff]
pci 0000:00:1c.3:   bridge window [mem 0xc0900000-0xc09fffff 64bit pref]
pci 0000:0a:01.0: [10b5:8605] type 01 class 0x060400
pci 0000:0a:01.0: supports D1 D2
pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:02.0: [10b5:8605] type 01 class 0x060400
pci 0000:0a:02.0: supports D1 D2
pci 0000:0a:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:03.0: [10b5:8605] type 01 class 0x060400
pci 0000:0a:03.0: supports D1 D2
pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a-0d]
pci 0000:09:00.0:   bridge window [io  0x8000-0x9fff]
pci 0000:09:00.0:   bridge window [mem 0xfb300000-0xfb5fffff]
pci 0000:09:00.0:   bridge window [mem 0xc0900000-0xc09fffff 64bit pref]
pci 0000:0b:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:0b:00.0: reg 0x10: [mem 0xfb500000-0xfb5007ff 64bit]
pci 0000:0b:00.0: reg 0x18: [io  0x9000-0x90ff]
pci 0000:0b:00.0: supports D2
pci 0000:0b:00.0: PME# supported from D2 D3hot D3cold
pci 0000:0a:01.0: PCI bridge to [bus 0b]
pci 0000:0a:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:0a:01.0:   bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:0c:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:0c:00.0: reg 0x10: [mem 0xc0910000-0xc091ffff 64bit pref]
pci 0000:0c:00.0: reg 0x18: [mem 0xc0900000-0xc090ffff 64bit pref]
pci 0000:0c:00.0: reg 0x30: [mem 0xfb400000-0xfb4007ff pref]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:02.0: PCI bridge to [bus 0c]
pci 0000:0a:02.0:   bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0a:02.0:   bridge window [mem 0xc0900000-0xc09fffff 64bit pref]
pci 0000:0d:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:0d:00.0: reg 0x10: [io  0x8040-0x8047]
pci 0000:0d:00.0: reg 0x14: [io  0x8030-0x8033]
pci 0000:0d:00.0: reg 0x18: [io  0x8020-0x8027]
pci 0000:0d:00.0: reg 0x1c: [io  0x8010-0x8013]
pci 0000:0d:00.0: reg 0x20: [io  0x8000-0x800f]
pci 0000:0d:00.0: reg 0x24: [mem 0xfb310000-0xfb3101ff]
pci 0000:0d:00.0: reg 0x30: [mem 0xfb300000-0xfb30ffff pref]
pci 0000:0d:00.0: PME# supported from D3hot
pci 0000:0a:03.0: PCI bridge to [bus 0d]
pci 0000:0a:03.0:   bridge window [io  0x8000-0x8fff]
pci 0000:0a:03.0:   bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0e:00.0: [1b4b:9220] type 00 class 0x010601
pci 0000:0e:00.0: reg 0x10: [io  0xa050-0xa057]
pci 0000:0e:00.0: reg 0x14: [io  0xa040-0xa043]
pci 0000:0e:00.0: reg 0x18: [io  0xa030-0xa037]
pci 0000:0e:00.0: reg 0x1c: [io  0xa020-0xa023]
pci 0000:0e:00.0: reg 0x20: [io  0xa000-0xa01f]
pci 0000:0e:00.0: reg 0x24: [mem 0xfb910000-0xfb9107ff]
pci 0000:0e:00.0: reg 0x30: [mem 0xfb900000-0xfb90ffff pref]
pci 0000:0e:00.0: PME# supported from D3hot
pci 0000:00:1c.4: PCI bridge to [bus 0e]
pci 0000:00:1c.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.4:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:0f:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:0f:00.0: reg 0x10: [mem 0xfb800000-0xfb80ffff 64bit]
pci 0000:0f:00.0: reg 0x18: [mem 0xfb810000-0xfb811fff 64bit]
pci 0000:0f:00.0: supports D1 D2
pci 0000:0f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0f]
pci 0000:00:1c.6:   bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:10:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:10:00.0: reg 0x10: [mem 0xfb700000-0xfb70ffff 64bit]
pci 0000:10:00.0: reg 0x18: [mem 0xfb710000-0xfb711fff 64bit]
pci 0000:10:00.0: supports D1 D2
pci 0000:10:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 10]
pci 0000:00:1c.7:   bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x8c000000-0xfbffffff] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI: \_SB_.UNC0: notify handler is installed
Found 2 acpi root devices
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7c8eb000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7d349000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7d800000-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: [io  0x0400-0x0453] could not be reserved
system 00:09: [io  0x0458-0x047f] has been reserved
system 00:09: [io  0x1180-0x119f] has been reserved
system 00:09: [io  0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0a: [io  0x0454-0x0457] has been reserved
system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:0a:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0:   bridge window [mem 0xb0000000-0xc07fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:03.0:   bridge window [mem 0x90000000-0xa07fffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.0:   bridge window [mem 0xc0a00000-0xc0afffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:0a:01.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:0a:01.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:0a:01.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:0a:01.0: PCI bridge to [bus 0b]
pci 0000:0a:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:0a:01.0:   bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:0a:02.0: PCI bridge to [bus 0c]
pci 0000:0a:02.0:   bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0a:02.0:   bridge window [mem 0xc0900000-0xc09fffff 64bit pref]
pci 0000:0a:03.0: PCI bridge to [bus 0d]
pci 0000:0a:03.0:   bridge window [io  0x8000-0x8fff]
pci 0000:0a:03.0:   bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:09:00.0: PCI bridge to [bus 0a-0d]
pci 0000:09:00.0:   bridge window [io  0x8000-0x9fff]
pci 0000:09:00.0:   bridge window [mem 0xfb300000-0xfb5fffff]
pci 0000:09:00.0:   bridge window [mem 0xc0900000-0xc09fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 09-0d]
pci 0000:00:1c.3:   bridge window [io  0x8000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xfb300000-0xfb6fffff]
pci 0000:00:1c.3:   bridge window [mem 0xc0900000-0xc09fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0e]
pci 0000:00:1c.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.4:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0f]
pci 0000:00:1c.6:   bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.7: PCI bridge to [bus 10]
pci 0000:00:1c.7:   bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 11]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x8c000000-0xfbffffff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 2 [mem 0xb0000000-0xc07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0x90000000-0xa07fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:06: resource 2 [mem 0xc0a00000-0xc0afffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:08: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:09: resource 0 [io  0x8000-0x9fff]
pci_bus 0000:09: resource 1 [mem 0xfb300000-0xfb6fffff]
pci_bus 0000:09: resource 2 [mem 0xc0900000-0xc09fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io  0x8000-0x9fff]
pci_bus 0000:0a: resource 1 [mem 0xfb300000-0xfb5fffff]
pci_bus 0000:0a: resource 2 [mem 0xc0900000-0xc09fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:0b: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:0c: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:0c: resource 2 [mem 0xc0900000-0xc09fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:0d: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:0e: resource 0 [io  0xa000-0xafff]
pci_bus 0000:0e: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:0f: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:10: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:11: resource 4 [io  0x0000-0x03af]
pci_bus 0000:11: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:11: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:11: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:11: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:11: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:11: resource 10 [mem 0x8c000000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18636K (ffff880035b8a000 - ffff880036dbd000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x788eb000-0x7c8eb000] (64MB) mapped at [ffff8800788eb000-ffff88007c8eafff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1401605046.672:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.3: driver skip pci_set_master, fix it!
pcieport 0000:09:00.0: irq 65 for MSI/MSI-X
pcieport 0000:0a:01.0: irq 66 for MSI/MSI-X
pcieport 0000:0a:02.0: irq 67 for MSI/MSI-X
pcieport 0000:0a:03.0: irq 68 for MSI/MSI-X
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:0a:01.0:pcie24: HPC vendor_id 10b5 device_id 8605 ss_vid 10b5 ss_did 8605
pciehp 0000:0a:01.0:pcie24: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Console: switching to colour frame buffer device 160x64
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf07000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12.6-031206-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf06000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.12.6-031206-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0f:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 76 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb usb3: Manufacturer: Linux 3.12.6-031206-generic xhci_hcd
usb usb3: SerialNumber: 0000:0f:00.0
irq 16: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.6-031206-generic #201312201218
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./X79 Extreme9, BIOS P3.60 07/24/2013
 ffff8810279d6c9c ffff88107fc03e48 ffffffff817444e2 0000000000000082
 ffff8810279d6c00 ffff88107fc03e78 ffffffff810c1ecd 0000000000000086
 ffff8810279d6c00 0000000000000010 0000000000000000 ffff88107fc03ea8
Call Trace:
   [] dump_stack+0x46/0x58
 [] __report_bad_irq+0x3d/0xe0
 [] note_interrupt+0x135/0x190
 [] handle_irq_event_percpu+0xb1/0x210
 [] ? sched_clock+0x9/0x10
 [] handle_irq_event+0x48/0x70
 [] handle_fasteoi_irq+0x5a/0x100
 [] handle_irq+0x22/0x40
 [] do_IRQ+0x5a/0xe0
 [] common_interrupt+0x6d/0x6d
   [] ? poll_idle+0x49/0x90
 [] ? poll_idle+0x1c/0x90
 [] ? ns_to_timeval+0x12/0x40
 [] ? ktime_get+0x54/0xe0
 [] cpuidle_enter_state+0x4f/0xe0
 [] cpuidle_idle_call+0xc0/0x220
 [] arch_cpu_idle+0xe/0x30
 [] cpu_idle_loop+0x98/0x260
 [] cpu_startup_entry+0x6b/0x70
 [] rest_init+0x77/0x80
 [] start_kernel+0x411/0x41e
 [] ? repair_env_string+0x5a/0x5a
 [] ? early_idt_handlers+0x120/0x120
 [] x86_64_start_reservations+0x2a/0x2c
 [] x86_64_start_kernel+0x108/0x117
handlers:
[] usb_hcd_irq
Disabling IRQ #16
tsc: Refined TSC clocksource calibration: 3599.960 MHz
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.12.6-031206-generic xhci_hcd
usb usb4: SerialNumber: 0000:0f:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:10:00.0: xHCI Host Controller
xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
xhci_hcd 0000:10:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:10:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:10:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:10:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:10:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:10:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:10:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:10:00.0: irq 84 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
hub 1-1:1.0: USB hub found
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.12.6-031206-generic xhci_hcd
usb usb5: SerialNumber: 0000:10:00.0
Switched to clocksource tsc
hub 1-1:1.0: 6 ports detected
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:10:00.0: xHCI Host Controller
xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.12.6-031206-generic xhci_hcd
usb usb6: SerialNumber: 0000:10:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: cbae0ae01771eb5588e3c26d00f5d3b6b96e8169'
usb 2-1: new high-speed USB device number 2 using ehci-pci
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 2:392:720
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
block loop0: hash matches
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=0bc2, idProduct=3312
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: Expansion Desk
usb 4-1: Manufacturer: Seagate 
usb 4-1: SerialNumber: NA4LSJGK
rtc_cmos 00:05: setting system clock to 2014-06-01 06:44:10 UTC (1401605050)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1344K (ffffffff81d19000 - ffffffff81e69000)
Write protecting the kernel read-only data: 12288k
usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-2: New USB device found, idVendor=0bc2, idProduct=3320
usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-2: Product: Expansion Desk
usb 4-2: Manufacturer: Seagate
usb 4-2: SerialNumber: NA4MCCHM
usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd
usb 4-3: New USB device found, idVendor=174c, idProduct=55aa
usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-3: Product: External HDD
usb 4-3: Manufacturer: Fantom
usb 4-3: SerialNumber: 2011042801FD
usb 4-4: new SuperSpeed USB device number 5 using xhci_hcd
usb 4-4: New USB device found, idVendor=174c, idProduct=55aa
usb 4-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-4: Product: External HDD
usb 4-4: Manufacturer: Fantom
usb 4-4: SerialNumber: 201211160776
usb 2-1.4: new low-speed USB device number 3 using ehci-pci
usb 2-1.4: New USB device found, idVendor=0d9f, idProduct=0004
usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-1.4: Product: HID UPS Battery
usb 2-1.4: Manufacturer: POWERCOM Co.,LTD
usb 2-1.4: SerialNumber: 004-0D9F-000
usb 2-1.5: new high-speed USB device number 4 using ehci-pci
Freeing unused kernel memory: 636K (ffff880001761000 - ffff880001800000)
usb 2-1.5: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.5: Product: USB2.0 Hub
hub 2-1.5:1.0: USB hub found
hub 2-1.5:1.0: 4 ports detected
Freeing unused kernel memory: 580K (ffff880001b6f000 - ffff880001c00000)
systemd-udevd[150]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 85 for MSI/MSI-X
tg3.c:v3.133 (Jul 29, 2013)
pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
usb-storage 4-1:1.0: USB Mass Storage device detected
scsi0 : usb-storage 4-1:1.0
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi1 : usb-storage 4-2:1.0
usb-storage 4-3:1.0: USB Mass Storage device detected
usb-storage 4-3:1.0: Quirks match for vid 174c pid 55aa: 400000
scsi2 : usb-storage 4-3:1.0
hidraw: raw HID events driver (C) Jiri Kosina
usb-storage 4-4:1.0: USB Mass Storage device detected
usb-storage 4-4:1.0: Quirks match for vid 174c pid 55aa: 400000
scsi3 : usb-storage 4-4:1.0
usbcore: registered new interface driver usb-storage
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-1.5.4: new high-speed USB device number 5 using ehci-pci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05100 irq 85
ata2: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05180 irq 85
ata3: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05200 irq 85
ata4: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05280 irq 85
ata5: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05300 irq 85
ata6: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05380 irq 85
pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
ahci 0000:07:00.0: irq 86 for MSI/MSI-X
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
scsi10 : ahci
scsi11 : ahci
ata7: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10100 irq 86
ata8: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10180 irq 86
pcieport 0000:00:1c.2: driver skip pci_set_master, fix it!
ahci 0000:08:00.0: irq 87 for MSI/MSI-X
ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
scsi12 : ahci
scsi13 : ahci
ata9: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10100 irq 87
ata10: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10180 irq 87
ahci 0000:0d:00.0: irq 88 for MSI/MSI-X
ahci 0000:0d:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0d:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
scsi14 : ahci
scsi15 : ahci
ata11: SATA max UDMA/133 abar m512@0xfb310000 port 0xfb310100 irq 88
ata12: SATA max UDMA/133 abar m512@0xfb310000 port 0xfb310180 irq 88
pcieport 0000:00:1c.4: driver skip pci_set_master, fix it!
ahci 0000:0e:00.0: irq 89 for MSI/MSI-X
ahci 0000:0e:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:0e:00.0: flags: 64bit ncq pio 
scsi16 : ahci
scsi17 : ahci
scsi18 : ahci
scsi19 : ahci
scsi20 : ahci
scsi21 : ahci
scsi22 : ahci
scsi23 : ahci
ata13: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910100 irq 89
ata14: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910180 irq 89
ata15: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910200 irq 89
ata16: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910280 irq 89
ata17: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910300 irq 89
ata18: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910380 irq 89
ata19: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910400 irq 89
ata20: SATA max UDMA/133 abar m2048@0xfb910000 port 0xfb910480 irq 89
firewire_ohci 0000:0b:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 2-1.5.4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.5.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.5.4: Product: USB2.0 Hub
hub 2-1.5.4:1.0: USB hub found
hub 2-1.5.4:1.0: 4 ports detected
hid-generic 0003:0D9F:0004.0001: hiddev0,hidraw0: USB HID v1.00 Device [POWERCOM Co.,LTD HID UPS Battery] on usb-0000:00:1d.0-1.4/input0
ata9: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-8: SanDisk SDSSDXP480G, R1311, max UDMA/133
ata4.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata4.00: configured for UDMA/133
ata1.00: ATA-7: WDC WD1500ADFS-00SLR5, 21.07QR5, max UDMA/133
ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: WDC WD1500HLFS-01G6U0, 04.04V01, max UDMA/133
ata5.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD1500ADFS-0 21.0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access     ATA      M4-CT256M4SSD2   070H PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
ata5.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Attached SCSI disk
ata6.00: ATAPI: HL-DT-ST BDDVDRW UH12NS29, 1.00, max UDMA/133
ata6.00: configured for UDMA/133
ata19: SATA link down (SStatus 0 SControl 300)
ata20: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata20.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata20.00: configured for UDMA/66
ata16: SATA link down (SStatus 0 SControl 300)
ata13: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata18: SATA link down (SStatus 0 SControl 300)
ata13.00: ATA-8: WDC WD4001FAEX-00MJRA0, 01.01L01, max UDMA/133
ata13.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata13.00: configured for UDMA/133
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 4:0:0:0: [sda] Attached SCSI disk
ata3.00: ATA-9: ST4000DX001-1CE168, CC44, max UDMA/133
ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 2-1.5.4.1: new low-speed USB device number 6 using ehci-pci
ata3.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access     ATA      ST4000DX001-1CE1 CC44 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 6:0:0:0: [sdc] 4096-byte physical blocks
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access     ATA      SanDisk SDSSDXP4 R131 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdd] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access     ATA      WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5
sd 8:0:0:0: [sde] 293046768 512-byte logical blocks: (150 GB/139 GiB)
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sde] Write Protect is off
sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 7:0:0:0: [sdd] Attached SCSI disk
 sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
 sde: sde1 sde2
sd 8:0:0:0: [sde] Attached SCSI disk
scsi 9:0:0:0: CD-ROM            HL-DT-ST BDDVDRW UH12NS29 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 9:0:0:0: Attached scsi CD-ROM sr0
sr 9:0:0:0: Attached scsi generic sg5 type 5
usb 2-1.5.4.1: New USB device found, idVendor=045e, idProduct=0040
usb 2-1.5.4.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-1.5.4.1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 2-1.5.4.1: Manufacturer: Microsoft
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.4/2-1.5.4.1/2-1.5.4.1:1.0/input/input3
hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.5.4.1/input0
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: ATA-9: ST4000DX001-1CE168, CC44, max UDMA/133
ata8.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
ata7.00: ATA-7: ST3500630AS, 3.AAE, max UDMA/133
ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
firewire_core 0000:0b:00.0: created device fw0: GUID 008f130090591400, S400
ata7.00: configured for UDMA/133
scsi 10:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
sd 10:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 10:0:0:0: Attached scsi generic sg6 type 0
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 11:0:0:0: Direct-Access     ATA      ST4000DX001-1CE1 CC44 PQ: 0 ANSI: 5
sd 11:0:0:0: [sdg] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 11:0:0:0: [sdg] 4096-byte physical blocks
sd 11:0:0:0: Attached scsi generic sg7 type 0
sd 11:0:0:0: [sdg] Write Protect is off
sd 11:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 16:0:0:0: Direct-Access     ATA      WDC WD4001FAEX-0 01.0 PQ: 0 ANSI: 5
sd 16:0:0:0: [sdh] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 16:0:0:0: Attached scsi generic sg8 type 0
sd 16:0:0:0: [sdh] Write Protect is off
sd 16:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 16:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 23:0:0:0: Processor         Marvell  91xx Config      1.01 PQ: 0 ANSI: 5
scsi 23:0:0:0: Attached scsi generic sg9 type 3
 sdg: sdg1
sd 11:0:0:0: [sdg] Attached SCSI disk
 sdf: sdf1
sd 10:0:0:0: [sdf] Attached SCSI disk
irq 16: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 155 Comm: systemd-udevd Not tainted 3.12.6-031206-generic #201312201218
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./X79 Extreme9, BIOS P3.60 07/24/2013
 ffff8810279d6c9c ffff88107fc03e48 ffffffff817444e2 0000000000000082
 ffff8810279d6c00 ffff88107fc03e78 ffffffff810c1ecd ffff881022d7bfd8
 ffff8810279d6c00 0000000000000010 0000000000000000 ffff88107fc03ea8
Call Trace:
   [] dump_stack+0x46/0x58
 [] __report_bad_irq+0x3d/0xe0
 [] note_interrupt+0x135/0x190
 [] handle_irq_event_percpu+0xb1/0x210
 [] ? account_system_time+0xb9/0x1b0
 [] handle_irq_event+0x48/0x70
 [] handle_fasteoi_irq+0x5a/0x100
 [] handle_irq+0x22/0x40
 [] do_IRQ+0x5a/0xe0
 [] common_interrupt+0x6d/0x6d
   [] ? mempool_alloc+0x5e/0x160
 [] ? __get_request+0x2c5/0x590
 [] ? __get_request+0x71/0x590
 [] get_request+0x1bd/0x350
 [] ? add_wait_queue+0x60/0x60
 [] blk_queue_bio+0x95/0x3b0
 [] generic_make_request.part.62+0x77/0xb0
 [] generic_make_request+0x68/0x70
 [] submit_bio+0x79/0x160
 [] ? bio_alloc_bioset+0xa0/0x1d0
 [] _submit_bh+0x11d/0x150
 [] submit_bh+0x10/0x20
 [] block_read_full_page+0x20d/0x370
 [] ? mem_cgroup_charge_common+0x71/0xa0
 [] ? I_BDEV+0x10/0x10
 [] ? add_to_page_cache_locked+0x7d/0x90
 [] blkdev_readpage+0x18/0x20
 [] read_pages+0xe8/0x100
 [] __do_page_cache_readahead+0x15b/0x170
 [] force_page_cache_readahead+0x71/0xa0
 [] page_cache_sync_readahead+0x43/0x50
 [] do_generic_file_read.constprop.39+0x2b6/0x440
 [] generic_file_aio_read+0xe1/0x220
 [] ? tlb_flush_mmu+0x5f/0xa0
 [] blkdev_aio_read+0x4d/0x80
 [] do_sync_read+0x5a/0x90
 [] vfs_read+0xb4/0x180
 [] SyS_read+0x52/0xa0
 [] tracesys+0xe1/0xe6
handlers:
[] usb_hcd_irq
[] irq_handler [firewire_ohci]
Disabling IRQ #16
 sdh: sdh1
sd 16:0:0:0: [sdh] Attached SCSI disk
scsi 0:0:0:0: Direct-Access     Seagate  Expansion Desk   0734 PQ: 0 ANSI: 6
sd 0:0:0:0: Attached scsi generic sg10 type 0
sd 0:0:0:0: [sdi] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 0:0:0:0: [sdi] Write Protect is off
sd 0:0:0:0: [sdi] Mode Sense: 2b 00 10 08
sd 0:0:0:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sdi] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
 sdi: sdi1 sdi2
sd 0:0:0:0: [sdi] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
scsi 2:0:0:0: Direct-Access     Fantom   External HDD     MEAO PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     Seagate  Expansion Desk   0711 PQ: 0 ANSI: 6
scsi 3:0:0:0: Direct-Access     Fantom   External HDD     MX6O PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg11 type 0
sd 1:0:0:0: Attached scsi generic sg12 type 0
sd 2:0:0:0: [sdj] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: Attached scsi generic sg13 type 0
sd 1:0:0:0: [sdk] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: [sdl] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: [sdj] Write Protect is off
sd 2:0:0:0: [sdj] Mode Sense: 23 00 00 00
sd 1:0:0:0: [sdk] Write Protect is off
sd 1:0:0:0: [sdk] Mode Sense: 4f 00 00 00
sd 3:0:0:0: [sdl] Write Protect is off
sd 3:0:0:0: [sdl] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdj] No Caching mode page found
sd 2:0:0:0: [sdj] Assuming drive cache: write through
sd 0:0:0:0: [sdi] Attached SCSI disk
sd 1:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdj] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: [sdl] No Caching mode page found
sd 3:0:0:0: [sdl] Assuming drive cache: write through
sd 1:0:0:0: [sdk] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: [sdl] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: [sdj] No Caching mode page found
sd 2:0:0:0: [sdj] Assuming drive cache: write through
sd 3:0:0:0: [sdl] No Caching mode page found
sd 3:0:0:0: [sdl] Assuming drive cache: write through
 sdk: sdk1
 sdl: sdl1 sdl2 sdl3 sdl4 < sdl5 >
sd 1:0:0:0: [sdk] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: [sdl] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
 sdj: sdj1
sd 1:0:0:0: [sdk] Attached SCSI disk
sd 2:0:0:0: [sdj] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: [sdl] No Caching mode page found
sd 3:0:0:0: [sdl] Assuming drive cache: write through
sd 3:0:0:0: [sdl] Attached SCSI disk
sd 2:0:0:0: [sdj] No Caching mode page found
sd 2:0:0:0: [sdj] Assuming drive cache: write through
sd 2:0:0:0: [sdj] Attached SCSI disk
tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:af:7c:cf
raid6: sse2x1    8832 MB/s
tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
raid6: sse2x2   12388 MB/s
tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
raid6: sse2x4   14366 MB/s
raid6: using algorithm sse2x4 (14366 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
   avx       : 28021.000 MB/sec
bio: create slab  at 1
Btrfs loaded
tg3 0000:0c:00.0 eth1: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:af:7e:a4
tg3 0000:0c:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
btrfs: device label homeButter devid 1 transid 121 /dev/sda5
btrfs: device label BigButter devid 1 transid 3007 /dev/sdc1
tg3 0000:0c:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0c:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
btrfs: device label BigButter devid 2 transid 3007 /dev/sdg1
btrfs: device label BigButter devid 3 transid 3007 /dev/sdh1
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (289) terminated with status 5
Adding 31287292k swap on /dev/sda6.  Priority:-1 extents:1 across:31287292k FS
systemd-udevd[448]: starting version 204
lp: driver loaded but no devices found
w83627ehf: Found NCT6776F chip at 0x290
wmi: Mapper loaded
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPR2 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPR2 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 90 for MSI/MSI-X
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x710
snd_hda_intel 0000:00:1b.0: irq 91 for MSI/MSI-X
autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0xc/0x0
   inputs:
     Mic=0x12
     Line=0x11
btrfs: device label BigButter devid 2 transid 3007 /dev/sdg1
btrfs: device label BigButter devid 3 transid 3007 /dev/sdh1
btrfs: device label BigButter devid 1 transid 3007 /dev/sdc1
btrfs: device label BigButter devid 1 transid 3007 /dev/sdc1
btrfs: device label BigButter devid 3 transid 3007 /dev/sdh1
btrfs: device label BigButter devid 2 transid 3007 /dev/sdg1
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
type=1400 audit(1401623071.078:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=598 comm="apparmor_parser"
type=1400 audit(1401623071.078:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
type=1400 audit(1401623071.078:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
type=1400 audit(1401623071.078:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=627 comm="apparmor_parser"
type=1400 audit(1401623071.078:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=627 comm="apparmor_parser"
type=1400 audit(1401623071.078:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=627 comm="apparmor_parser"
type=1400 audit(1401623071.078:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=890 comm="apparmor_parser"
type=1400 audit(1401623071.078:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=890 comm="apparmor_parser"
type=1400 audit(1401623071.078:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=890 comm="apparmor_parser"
type=1400 audit(1401623071.078:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 63031 MBytes.
[fglrx]   vendor: 1002 device: 67b0 count: 1
[fglrx]   vendor: 1002 device: 67b0 count: 2
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
pcieport 0000:00:02.0: driver skip pci_set_master, fix it!
[fglrx] ioport: bar 4, base 0xd000, size: 0x100
pcieport 0000:00:03.0: driver skip pci_set_master, fix it!
pci 0000:04:00.0: enabling device (0000 -> 0003)
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.20.7 [May 22 2014] with 2 minors
ca0132 DOWNLOAD OK :-) DSP IS RUNNING.
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
init: statd main process (1043) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1048) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1053) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1059) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1064) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1069) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1074) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1080) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1085) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1090) terminated with status 1
init: statd main process ended, respawning
init: statd main process (1095) terminated with status 1
init: statd respawning too fast, stopped
tg3 0000:06:00.0: irq 92 for MSI/MSI-X
tg3 0000:06:00.0: irq 93 for MSI/MSI-X
tg3 0000:06:00.0: irq 94 for MSI/MSI-X
tg3 0000:06:00.0: irq 95 for MSI/MSI-X
tg3 0000:06:00.0: irq 96 for MSI/MSI-X
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:03:00.1: Using LPIB position fix
snd_hda_intel 0000:03:00.1: irq 97 for MSI/MSI-X
hda-intel 0000:03:00.1: Enable sync_write for stable communication
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input13
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input12
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input11
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input10
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input9
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input8
hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:04:00.1: Using LPIB position fix
snd_hda_intel 0000:04:00.1: irq 98 for MSI/MSI-X
hda-intel 0000:04:00.1: Enable sync_write for stable communication
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input19
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input18
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input17
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input16
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input15
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input14
btrfs: device label homeButter devid 1 transid 121 /dev/sda5
btrfs: device label homeButter devid 1 transid 121 /dev/sda5
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
btrfs: device label homeButter devid 1 transid 121 /dev/sda5
btrfs: enabling auto defrag
btrfs: use lzo compression
btrfs: disk space caching is enabled
tg3 0000:06:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:06:00.0 eth0: Flow control is on for TX and on for RX
tg3 0000:06:00.0 eth0: EEE is enabled
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: avahi-cups-reload main process (1454) terminated with status 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
audit_printk_skb: 33 callbacks suppressed
type=1400 audit(1401623078.638:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1476 comm="apparmor_parser"
type=1400 audit(1401623078.638:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1476 comm="apparmor_parser"
type=1400 audit(1401623078.638:25): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1476 comm="apparmor_parser"
init: failsafe main process (1261) killed by TERM signal
type=1400 audit(1401623083.346:26): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1832 comm="apparmor_parser"
type=1400 audit(1401623083.346:27): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1832 comm="apparmor_parser"
type=1400 audit(1401623083.346:28): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1832 comm="apparmor_parser"
type=1400 audit(1401623083.346:29): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1832 comm="apparmor_parser"
type=1400 audit(1401623083.346:30): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1832 comm="apparmor_parser"
type=1400 audit(1401623083.346:31): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1832 comm="apparmor_parser"
type=1400 audit(1401623083.350:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1836 comm="apparmor_parser"
audit_printk_skb: 27 callbacks suppressed
type=1400 audit(1401623083.646:42): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1833 comm="apparmor_parser"
type=1400 audit(1401623083.646:43): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=1833 comm="apparmor_parser"
type=1400 audit(1401623083.646:44): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1833 comm="apparmor_parser"
type=1400 audit(1401623083.646:45): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=1833 comm="apparmor_parser"
type=1400 audit(1401623083.646:46): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1833 comm="apparmor_parser"
type=1400 audit(1401623083.646:47): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=1833 comm="apparmor_parser"
type=1400 audit(1401623083.650:48): apparmor="STATUS" operation="profile_replace" name="sanitized_helper" pid=1833 comm="apparmor_parser"
type=1400 audit(1401623083.650:49): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=1833 comm="apparmor_parser"
type=1400 audit(1401623083.666:50): apparmor="STATUS" operation="profile_replace" name="sanitized_helper" pid=1833 comm="apparmor_parser"
type=1400 audit(1401623083.666:51): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=1833 comm="apparmor_parser"
init: libvirt-bin main process (1996) terminated with status 127
init: libvirt-bin main process ended, respawning
fglrx_pci 0000:03:00.0: irq 99 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 2078
[fglrx] Firegl kernel thread PID: 2079
[fglrx] Firegl kernel thread PID: 2080
[fglrx] IRQ 99 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f738000, size:4000 
[fglrx] Reserved FB block: Unshared offset:f73c000, size:4c4000 
[fglrx] Reserved FB block: Unshared offset:fc00000, size:100000 
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000 
[fglrx] Reserved FB block: Unshared offset:ffff4000, size:c000 
fglrx_pci 0000:04:00.0: irq 100 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 2081
[fglrx] Firegl kernel thread PID: 2082
[fglrx] Firegl kernel thread PID: 2083
[fglrx] IRQ 100 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f738000, size:4000 
[fglrx] Reserved FB block: Unshared offset:f73c000, size:4c4000 
[fglrx] Reserved FB block: Unshared offset:fc00000, size:100000 
[fglrx] Reserved FB block: Unshared offset:ffff4000, size:c000 
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
EXT4-fs (sdl5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdl3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdl2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdl1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdk1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdj1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdi2): mounted filesystem with ordered data mode. Opts: (null)
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x1f5 offMax=0x1380
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.12 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (3324) terminated with status 1

Return To miner2 System Information