dmesg - hqxdev002-c-ray-1.1.0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.3-13.el6.x86_64 (dwang@hqxdev001) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Wed May 14 14:15:43 EDT 2014
Command line: ro root=/dev/mapper/vg_hqxdev002-lv_root rd_NO_LUKS rd_LVM_LV=vg_hqxdev002/lv_swap LANG=en_US.UTF-8 rd_LVM_LV=vg_hqxdev002/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
Freeing 9c-100 pfn range: 100 pages freed
1-1 mapping on 9c->100
1-1 mapping on cd2f0->100000
Released 100 pages of unused memory
Set 208244 page(s) to 1-1 mapping
Populating 80000-80064 pfn range: 100 pages added
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x000000000009bfff] usable
Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x00000000cd2effff] usable
Xen: [mem 0x00000000cd2f0000-0x00000000cd31bfff] reserved
Xen: [mem 0x00000000cd31c000-0x00000000cd35afff] ACPI data
Xen: [mem 0x00000000cd35b000-0x00000000cfffffff] reserved
Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Xen: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
Xen: [mem 0x0000000100000000-0x00000005b315bfff] usable
Xen: [mem 0x00000005b315c000-0x000000082fffffff] unusable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Dell Inc. PowerEdge R720/0VWT90, BIOS 2.1.3 11/20/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x5b315c max_arch_pfn = 0x400000000
e820: last_pfn = 0xcd2f0 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000095000] 95000 size 28672
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
[mem 0x7fe00000-0x7fffffff] page 4k
BRK [0x0217c000, 0x0217cfff] PGTABLE
BRK [0x0217d000, 0x0217dfff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7fdfffff]
[mem 0x7c000000-0x7fdfffff] page 4k
BRK [0x0217e000, 0x0217efff] PGTABLE
BRK [0x0217f000, 0x0217ffff] PGTABLE
BRK [0x02180000, 0x02180fff] PGTABLE
BRK [0x02181000, 0x02181fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x7bffffff]
[mem 0x00100000-0x7bffffff] page 4k
init_memory_mapping: [mem 0x80000000-0xcd2effff]
[mem 0x80000000-0xcd2effff] page 4k
init_memory_mapping: [mem 0x100000000-0x5b315bfff]
[mem 0x100000000-0x5b315bfff] page 4k
RAMDISK: [mem 0x02589000-0x05ba9fff]
ACPI: RSDP 00000000000f0c80 000024 (v02 DELL )
ACPI: XSDT 00000000000f0dc8 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000cd33534c 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cd31c000 008029 (v01 DELL PE_SC3 00000001 INTL 20110211)
ACPI: FACS 00000000cd337000 000040
ACPI: APIC 00000000cd334478 0001EA (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000cd334664 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000cd3346b8 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: XMAR 00000000cd3346f4 000158 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000cd334a10 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000cd334a50 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000cd334b88 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000cd3241ec 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000cd32445c 00055C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000cd32402c 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000cd32405c 000190 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000cd3352e4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: PC__ 00000000cd335274 00006E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000cd334db0 0004C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000cd338000 004D34 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
NUMA turned off
Faking a node at [mem 0x0000000000000000-0x00000005b315bfff]
Initmem setup node 0 [mem 0x00000000-0x5b315bfff]
NODE_DATA [mem 0x7d45b000-0x7d481fff]
crashkernel: memory value expected
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x5b315bfff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0xcd2effff]
node 0: [mem 0x100000000-0x5b315bfff]
On node 0 totalpages: 5768167
DMA zone: 56 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 11435 pages used for memmap
DMA32 zone: 836336 pages, LIFO batch:31
Normal zone: 67373 pages used for memmap
Normal zone: 4927836 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x50] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x51] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x52] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x53] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x54] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x55] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x56] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x57] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x58] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x59] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x5a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x5b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x5c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x5d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x5e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x5f] disabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x60] disabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x61] disabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x62] disabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x63] disabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x64] disabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x65] disabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x66] disabled)
ACPI: LAPIC (acpi_id[0x28] lapic_id[0x67] disabled)
ACPI: LAPIC (acpi_id[0x29] lapic_id[0x68] disabled)
ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x69] disabled)
ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x6a] disabled)
ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x6b] disabled)
ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x6c] disabled)
ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x6d] disabled)
ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x6e] disabled)
ACPI: LAPIC (acpi_id[0x30] lapic_id[0x6f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 32-55
ACPI: IOAPIC (id[0x02] address[0xfec7f000] gsi_base[64])
IOAPIC[2]: apic_id 2, version 32, address 0xfec7f000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 48 CPUs, 32 hotplug CPUs
nr_irqs_gsi: 104
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcd2f0000-0xcd31bfff]
PM: Registered nosave memory: [mem 0xcd31c000-0xcd35afff]
PM: Registered nosave memory: [mem 0xcd35b000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on Xen
Xen version: 4.5-unstable (preserve-AD)
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:48 nr_cpu_ids:48 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88007c600000 s86400 r8192 d24192 u131072
pcpu-alloc: s86400 r8192 d24192 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 5689281
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_hqxdev002-lv_root rd_NO_LUKS rd_LVM_LV=vg_hqxdev002/lv_swap LANG=en_US.UTF-8 rd_LVM_LV=vg_hqxdev002/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
software IO TLB [mem 0x629b9000-0x669b9000] (64MB) mapped at [ffff8800629b9000-ffff8800669b8fff]
Memory: 1584600K/23072668K available (6600K kernel code, 1334K rwdata, 3216K rodata, 1992K init, 2164K bss, 21488068K reserved)
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:524544 nr_irqs:1896 16
xen:events: Using FIFO-based ABI
xen: sci override: global_irq=9 trigger=0 polarity=0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> pirq=9 -> irq=9 (gsi=9)
xen: acpi sci 9
xen: --> pirq=1 -> irq=1 (gsi=1)
xen: --> pirq=2 -> irq=2 (gsi=2)
xen: --> pirq=3 -> irq=3 (gsi=3)
xen: --> pirq=4 -> irq=4 (gsi=4)
xen: --> pirq=5 -> irq=5 (gsi=5)
xen: --> pirq=6 -> irq=6 (gsi=6)
xen: --> pirq=7 -> irq=7 (gsi=7)
xen: --> pirq=8 -> irq=8 (gsi=8)
xen: --> pirq=10 -> irq=10 (gsi=10)
xen: --> pirq=11 -> irq=11 (gsi=11)
xen: --> pirq=12 -> irq=12 (gsi=12)
xen: --> pirq=13 -> irq=13 (gsi=13)
xen: --> pirq=14 -> irq=14 (gsi=14)
xen: --> pirq=15 -> irq=15 (gsi=15)
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 92798976 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
tsc: Detected 3300.076 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.15 BogoMIPS (lpj=3300076)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff81f41000 - ffffffff81f48000)
ftrace: allocating 26785 entries in 105 pages
cpu 0 spinlock event irq 105
Performance Events: unsupported p6 CPU model 45 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
installing Xen timer for CPU 1
cpu 1 spinlock event irq 112
installing Xen timer for CPU 2
cpu 2 spinlock event irq 119
installing Xen timer for CPU 3
cpu 3 spinlock event irq 126
installing Xen timer for CPU 4
cpu 4 spinlock event irq 133
installing Xen timer for CPU 5
cpu 5 spinlock event irq 140
installing Xen timer for CPU 6
cpu 6 spinlock event irq 147
installing Xen timer for CPU 7
cpu 7 spinlock event irq 154
installing Xen timer for CPU 8
cpu 8 spinlock event irq 161
installing Xen timer for CPU 9
cpu 9 spinlock event irq 168
installing Xen timer for CPU 10
cpu 10 spinlock event irq 175
installing Xen timer for CPU 11
cpu 11 spinlock event irq 182
installing Xen timer for CPU 12
cpu 12 spinlock event irq 189
installing Xen timer for CPU 13
cpu 13 spinlock event irq 196
installing Xen timer for CPU 14
cpu 14 spinlock event irq 203
installing Xen timer for CPU 15
cpu 15 spinlock event irq 210
x86: Booted up 1 node, 16 CPUs
devtmpfs: initialized
regulator-dummy: no parameters
NET: Registered protocol family 16
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: Dell System detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: PCIe AER handled by firmware
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3d]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0x1fff]
pci_bus 0000:00: root bus resource [io 0xe000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd8000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:3c06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf8fb000-0xdf8fb00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xdf8fc000-0xdf8fc00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf8fd000-0xdf8fd3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf8fe000-0xdf8fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xece8-0xecef]
pci 0000:00:1f.2: reg 0x14: [io 0xecf8-0xecfb]
pci 0000:00:1f.2: reg 0x18: [io 0xecf0-0xecf7]
pci 0000:00:1f.2: reg 0x1c: [io 0xecfc-0xecff]
pci 0000:00:1f.2: reg 0x20: [io 0xecc0-0xecdf]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf8ff000-0xdf8ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:02:00.0: [14e4:165f] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xd90a0000-0xd90affff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xd90b0000-0xd90bffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xd90c0000-0xd90cffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xdc000000-0xdc03ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: [14e4:165f] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0xd90d0000-0xd90dffff 64bit pref]
pci 0000:02:00.1: reg 0x18: [mem 0xd90e0000-0xd90effff 64bit pref]
pci 0000:02:00.1: reg 0x20: [mem 0xd90f0000-0xd90fffff 64bit pref]
pci 0000:02:00.1: reg 0x30: [mem 0xdc000000-0xdc03ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdc7fffff]
pci 0000:00:01.0: bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xd91a0000-0xd91affff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd91b0000-0xd91bffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [mem 0xd91c0000-0xd91cffff 64bit pref]
pci 0000:01:00.0: reg 0x30: [mem 0xdc800000-0xdc83ffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0xd91d0000-0xd91dffff 64bit pref]
pci 0000:01:00.1: reg 0x18: [mem 0xd91e0000-0xd91effff 64bit pref]
pci 0000:01:00.1: reg 0x20: [mem 0xd91f0000-0xd91fffff 64bit pref]
pci 0000:01:00.1: reg 0x30: [mem 0xdc800000-0xdc83ffff pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xdc800000-0xdcffffff]
pci 0000:00:01.1: bridge window [mem 0xd9100000-0xd91fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 04]
pci 0000:03:00.0: [1000:005b] type 00 class 0x010400
pci 0000:03:00.0: reg 0x10: [io 0xfc00-0xfcff]
pci 0000:03:00.0: reg 0x14: [mem 0xddffc000-0xddffffff 64bit]
pci 0000:03:00.0: reg 0x1c: [mem 0xddf80000-0xddfbffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xdd000000-0xdd01ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0xf000-0xffff]
pci 0000:00:02.2: bridge window [mem 0xdd000000-0xddffffff]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1912:0013] type 01 class 0x060400
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf7fffff]
pci 0000:00:1c.7: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:09:00.0: [1912:0013] type 01 class 0x060400
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:01.0: [1912:0013] type 01 class 0x060400
pci 0000:09:01.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: bridge window [mem 0xde000000-0xdf7fffff]
pci 0000:08:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:0a:00.0: [1912:0012] type 01 class 0x060400
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:09:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:0b:00.0: [102b:0534] type 00 class 0x030000
pci 0000:0b:00.0: reg 0x10: [mem 0xd8000000-0xd8ffffff pref]
pci 0000:0b:00.0: reg 0x14: [mem 0xdeffc000-0xdeffffff]
pci 0000:0b:00.0: reg 0x18: [mem 0xde000000-0xde7fffff]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0a:00.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:0a:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:09:01.0: PCI bridge to [bus 0c]
pci 0000:09:01.0: bridge window [mem 0xdf700000-0xdf7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x1fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-7e])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: PCIe AER handled by firmware
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:40
pci_bus 0000:40: root bus resource [bus 40-7e]
pci_bus 0000:40: root bus resource [io 0x2000-0x3fff]
pci_bus 0000:40: root bus resource [io 0x4000-0x5fff]
pci_bus 0000:40: root bus resource [io 0x6000-0x7fff]
pci_bus 0000:40: root bus resource [io 0x8000-0x9fff]
pci_bus 0000:40: root bus resource [io 0xa000-0xbfff]
pci_bus 0000:40: root bus resource [io 0xc000-0xdfff]
pci_bus 0000:40: root bus resource [mem 0xd4000000-0xd7ffffff]
pci 0000:40:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:40:01.0: PME# supported from D0 D3hot D3cold
pci 0000:40:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:40:02.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:40:03.2: PME# supported from D0 D3hot D3cold
pci 0000:40:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:40:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:41:00.0: [10df:f100] type 00 class 0x0c0400
pci 0000:41:00.0: reg 0x10: [mem 0xd4fff000-0xd4ffffff 64bit]
pci 0000:41:00.0: reg 0x18: [mem 0xd4ff8000-0xd4ffbfff 64bit]
pci 0000:41:00.0: reg 0x20: [io 0xdc00-0xdcff]
pci 0000:41:00.0: reg 0x30: [mem 0xd4000000-0xd403ffff pref]
pci 0000:40:01.0: PCI bridge to [bus 41]
pci 0000:40:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:40:01.0: bridge window [mem 0xd4000000-0xd4ffffff]
pci 0000:42:00.0: [8086:1521] type 00 class 0x020000
pci 0000:42:00.0: reg 0x10: [mem 0xd5e00000-0xd5efffff]
pci 0000:42:00.0: reg 0x1c: [mem 0xd5ffc000-0xd5ffffff]
pci 0000:42:00.0: reg 0x30: [mem 0xd5000000-0xd507ffff pref]
pci 0000:42:00.0: PME# supported from D0 D3hot D3cold
pci 0000:42:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:42:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:40:02.0: PCI bridge to [bus 42]
pci 0000:40:02.0: bridge window [mem 0xd5000000-0xd5ffffff]
pci 0000:40:03.0: PCI bridge to [bus 43]
pci 0000:44:00.0: [10df:f100] type 00 class 0x0c0400
pci 0000:44:00.0: reg 0x10: [mem 0xd6fff000-0xd6ffffff 64bit]
pci 0000:44:00.0: reg 0x18: [mem 0xd6ff8000-0xd6ffbfff 64bit]
pci 0000:44:00.0: reg 0x20: [io 0xcc00-0xccff]
pci 0000:44:00.0: reg 0x30: [mem 0xd6000000-0xd603ffff pref]
pci 0000:40:03.2: PCI bridge to [bus 44]
pci 0000:40:03.2: bridge window [io 0xc000-0xcfff]
pci 0000:40:03.2: bridge window [mem 0xd6000000-0xd6ffffff]
acpi PNP0A08:01: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Root Bridge [P0B1] (domain 0000 [bus 3f])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:02: PCIe AER handled by firmware
acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [bus 3f]
pci 0000:3f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:3f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:3f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:3f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:3f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:3f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:3f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:3f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:3f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:3f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:3f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:3f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:3f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:3f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:3f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:3f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:3f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:3f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:3f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:3f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:3f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:3f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:3f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:3f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:3f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:3f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:3f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:3f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:3f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:3f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:3f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:3f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:3f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:3f:13.6: [8086:3c45] type 00 class 0x088000
acpi PNP0A08:02: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Root Bridge [P1B1] (domain 0000 [bus 7f])
acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:03: PCIe AER handled by firmware
acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
acpi PNP0A08:03: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 *6 7 11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0b:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd2f0000-0xcfffffff]
e820: reserve RAM buffer [mem 0x5b315c000-0x5b3ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource xen
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
xen: registering gsi 13 triggering 1 polarity 0
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
xen: registering gsi 8 triggering 1 polarity 0
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: registering gsi 4 triggering 1 polarity 0
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
xen: registering gsi 3 triggering 1 polarity 0
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x0800-0x087f] could not be reserved
system 00:06: [io 0x0880-0x08ff] has been reserved
system 00:06: [io 0x0900-0x091f] has been reserved
system 00:06: [io 0x0920-0x0923] has been reserved
system 00:06: [io 0x0924] has been reserved
system 00:06: [io 0x0370-0x0377] has been reserved
system 00:06: [io 0x0ca0-0x0ca7] has been reserved
system 00:06: [io 0x0ca9-0x0cab] has been reserved
system 00:06: [io 0x0cad-0x0caf] has been reserved
system 00:06: [io 0x0cb0-0x0cbf] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
xen: registering gsi 10 triggering 1 polarity 0
system 00:07: [io 0x0ca8] has been reserved
system 00:07: [io 0x0cac] has been reserved
system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:08: [mem 0xe0000000-0xe3efffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xe4000000-0xe7ffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe3f00000-0xe3ffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xdf900000-0xdf901fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xd7000000-0xd7001fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
PM-Timer failed consistency check (0xffffff) - aborting.
pci 0000:02:00.1: address space collision: [mem 0xdc000000-0xdc03ffff pref] conflicts with 0000:02:00.0 [mem 0xdc000000-0xdc03ffff pref]
pci 0000:01:00.1: address space collision: [mem 0xdc800000-0xdc83ffff pref] conflicts with 0000:01:00.0 [mem 0xdc800000-0xdc83ffff pref]
pci 0000:02:00.1: BAR 6: assigned [mem 0xd9000000-0xd903ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdc7fffff]
pci 0000:00:01.0: bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:01:00.1: BAR 6: assigned [mem 0xd9100000-0xd913ffff pref]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xdc800000-0xdcffffff]
pci 0000:00:01.1: bridge window [mem 0xd9100000-0xd91fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 04]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0xf000-0xffff]
pci 0000:00:02.2: bridge window [mem 0xdd000000-0xddffffff]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0a:00.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:0a:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:09:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:09:01.0: PCI bridge to [bus 0c]
pci 0000:09:01.0: bridge window [mem 0xdf700000-0xdf7fffff]
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: bridge window [mem 0xde000000-0xdf7fffff]
pci 0000:08:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf7fffff]
pci 0000:00:1c.7: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0x1fff]
pci_bus 0000:00: resource 8 [io 0xe000-0xffff]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc7fffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd90fffff 64bit pref]
pci_bus 0000:01: resource 1 [mem 0xdc800000-0xdcffffff]
pci_bus 0000:01: resource 2 [mem 0xd9100000-0xd91fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xdd000000-0xddffffff]
pci_bus 0000:08: resource 1 [mem 0xde000000-0xdf7fffff]
pci_bus 0000:08: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xde000000-0xdf7fffff]
pci_bus 0000:09: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:0a: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:0b: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xdf700000-0xdf7fffff]
pci_bus 0000:0d: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0d: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0d: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0d: resource 7 [io 0x0d00-0x1fff]
pci_bus 0000:0d: resource 8 [io 0xe000-0xffff]
pci_bus 0000:0d: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 10 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:0d: resource 11 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:40: max bus depth: 1 pci_try_num: 2
pci 0000:42:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:42:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:40:02.0: BAR 15: assigned [mem 0xd7100000-0xd71fffff 64bit pref]
pci 0000:40:01.0: PCI bridge to [bus 41]
pci 0000:40:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:40:01.0: bridge window [mem 0xd4000000-0xd4ffffff]
pci 0000:42:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:42:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:42:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:42:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:42:00.0: BAR 7: assigned [mem 0xd7100000-0xd711ffff 64bit pref]
pci 0000:42:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:42:00.0: BAR 10: assigned [mem 0xd7120000-0xd713ffff 64bit pref]
pci 0000:40:02.0: PCI bridge to [bus 42]
pci 0000:40:02.0: bridge window [mem 0xd5000000-0xd5ffffff]
pci 0000:40:02.0: bridge window [mem 0xd7100000-0xd71fffff 64bit pref]
pci 0000:40:03.0: PCI bridge to [bus 43]
pci 0000:40:03.2: PCI bridge to [bus 44]
pci 0000:40:03.2: bridge window [io 0xc000-0xcfff]
pci 0000:40:03.2: bridge window [mem 0xd6000000-0xd6ffffff]
pci_bus 0000:40: resource 4 [io 0x2000-0x3fff]
pci_bus 0000:40: resource 5 [io 0x4000-0x5fff]
pci_bus 0000:40: resource 6 [io 0x6000-0x7fff]
pci_bus 0000:40: resource 7 [io 0x8000-0x9fff]
pci_bus 0000:40: resource 8 [io 0xa000-0xbfff]
pci_bus 0000:40: resource 9 [io 0xc000-0xdfff]
pci_bus 0000:40: resource 10 [mem 0xd4000000-0xd7ffffff]
pci_bus 0000:41: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:41: resource 1 [mem 0xd4000000-0xd4ffffff]
pci_bus 0000:42: resource 1 [mem 0xd5000000-0xd5ffffff]
pci_bus 0000:42: resource 2 [mem 0xd7100000-0xd71fffff 64bit pref]
pci_bus 0000:44: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:44: resource 1 [mem 0xd6000000-0xd6ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
xen: registering gsi 23 triggering 0 polarity 1
xen: --> pirq=23 -> irq=23 (gsi=23)
xen: registering gsi 22 triggering 0 polarity 1
xen: --> pirq=22 -> irq=22 (gsi=22)
pci 0000:0b:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 55428K (ffff880002589000 - ffff880005baa000)
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1400179347.064:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3203
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
xen: registering gsi 53 triggering 0 polarity 1
xen: --> pirq=53 -> irq=53 (gsi=53)
xen: registering gsi 53 triggering 0 polarity 1
Already setup the GSI :53
xen: registering gsi 53 triggering 0 polarity 1
Already setup the GSI :53
xen: registering gsi 53 triggering 0 polarity 1
Already setup the GSI :53
xen: registering gsi 53 triggering 0 polarity 1
Already setup the GSI :53
xen: registering gsi 16 triggering 0 polarity 1
xen: --> pirq=16 -> irq=16 (gsi=16)
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
xen: registering gsi 85 triggering 0 polarity 1
xen: --> pirq=85 -> irq=85 (gsi=85)
xen: registering gsi 85 triggering 0 polarity 1
Already setup the GSI :85
xen: registering gsi 85 triggering 0 polarity 1
Already setup the GSI :85
xen: registering gsi 85 triggering 0 polarity 1
Already setup the GSI :85
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pcieport 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:09:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:09:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pcieport 0000:40:01.0: Signaling PME through PCIe PME interrupt
pci 0000:41:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:40:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:40:02.0: Signaling PME through PCIe PME interrupt
pci 0000:42:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:40:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:40:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:40:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:40:03.2: Signaling PME through PCIe PME interrupt
pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:40:03.2:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
intel_idle: intel_idle yielding to none
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
Warning: Processor Platform Limit not supported.
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
mei_me 0000:00:16.0: initialization failed.
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xen: registering gsi 23 triggering 0 polarity 1
Already setup the GSI :23
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xdf8fd000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.3-13.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xen: registering gsi 22 triggering 0 polarity 1
Already setup the GSI :22
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 22, io mem 0xdf8fe000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.14.3-13.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
random: nonblocking pool is initialized
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
rtc_cmos 00:03: setting system clock to 2014-05-15 18:42:27 UTC (1400179347)
Freeing unused kernel memory: 1992K (ffffffff81d4f000 - ffffffff81f41000)
Write protecting the kernel read-only data: 12288k
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Freeing unused kernel memory: 1580K (ffff880001675000 - ffff880001800000)
Freeing unused kernel memory: 880K (ffff880001b24000 - ffff880001c00000)
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
udev: starting version 147
udevd (160): /proc/160/oom_adj is deprecated, please use /proc/160/oom_score_adj instead.
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
[TTM] Zone kernel: Available graphics memory: 822254 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
Failed to add WC MTRR for [00000000d8000000-00000000d8ffffff]; performance may suffer.
fbcon: mgadrmfb (fb0) is primary device
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Console: switching to colour frame buffer device 128x48
usb 1-1.6: new high-speed USB device number 3 using ehci-pci
mgag200 0000:0b:00.0: fb0: mgadrmfb frame buffer device
mgag200 0000:0b:00.0: registered panic notifier
[drm] Initialized mgag200 1.0.0 20110418 for 0000:0b:00.0 on minor 0
dracut: Starting plymouth daemon
usb 1-1.6: New USB device found, idVendor=0624, idProduct=0248
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Gadget USB HUB
usb 1-1.6: Manufacturer: no manufacturer
usb 1-1.6: SerialNumber: 0123456789
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 6 ports detected
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 1-1.6.1: new high-speed USB device number 4 using ehci-pci
usb 1-1.6.1: New USB device found, idVendor=0624, idProduct=0249
usb 1-1.6.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.6.1: Product: Keyboard/Mouse Function
usb 1-1.6.1: Manufacturer: Avocent
usb 1-1.6.1: SerialNumber: 20120917
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/0003:0624:0249.0001/input/input1
hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.1/0003:0624:0249.0002/input/input2
wmi: Mapper loaded
hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.2/0003:0624:0249.0003/input/input3
hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input2
megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
megasas: 0x1000:0x005b:0x1028:0x1f34: bus 3:slot 0:func 0
xen: registering gsi 42 triggering 0 polarity 1
xen: --> pirq=42 -> irq=42 (gsi=42)
megasas: FW now in Ready state
megaraid_sas 0000:03:00.0: [scsi0]: FW supports MSIX vector,Online CPUs: ,Current MSIX
megasas:IOC Init cmd success
megasas: INIT adapter done
megaraid_sas 0000:03:00.0: Controller type: MR,Memory size is: 1024MB
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access DELL PERC H710P 3.13 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access DELL PERC H710P 3.13 PQ: 0 ANSI: 5
scsi 0:0:2:0: Direct-Access DELL PERC H710P 3.13 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access DELL PERC H710P 3.13 PQ: 0 ANSI: 5
scsi 0:2:1:0: Direct-Access DELL PERC H710P 3.13 PQ: 0 ANSI: 5
scsi 0:2:2:0: Direct-Access DELL PERC H710P 3.13 PQ: 0 ANSI: 5
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 20 triggering 0 polarity 1
xen: --> pirq=20 -> irq=20 (gsi=20)
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff100 irq 248
ata2: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff180 irq 248
ata3: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff200 irq 248
ata4: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff280 irq 248
ata5: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff300 irq 248
ata6: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff380 irq 248
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5.00: ATAPI: TSSTcorp DVD+/-RW TS-L633J, D250, max UDMA/100
ata5.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633J D250 PQ: 0 ANSI: 5
Emulex LightPulse Fibre Channel SCSI driver 8.3.43
Copyright(c) 2004-2013 Emulex. All rights reserved.
xen: registering gsi 66 triggering 0 polarity 1
xen: --> pirq=66 -> irq=66 (gsi=66)
scsi7 : Emulex LPe12000 PCIe Fibre Channel Adapter on PCI bus 41 device 00 irq 66
xen: registering gsi 82 triggering 0 polarity 1
xen: --> pirq=82 -> irq=82 (gsi=82)
scsi8 : Emulex LPe12000 PCIe Fibre Channel Adapter on PCI bus 44 device 00 irq 82
sd 0:2:0:0: [sda] 285474816 512-byte logical blocks: (146 GB/136 GiB)
sd 0:2:1:0: [sdb] 584843264 512-byte logical blocks: (299 GB/278 GiB)
sd 0:2:2:0: [sdc] 584843264 512-byte logical blocks: (299 GB/278 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:2:0: [sdc] Write Protect is off
sd 0:2:2:0: [sdc] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 1f 00 00 08
sd 0:2:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:2:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sdc: unknown partition table
sdb: unknown partition table
sd 0:2:2:0: [sdc] Attached SCSI disk
sd 0:2:0:0: [sda] Attached SCSI disk
sd 0:2:1:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda2 sdb sdc for LVM logical volumes vg_hqxdev002/lv_swap vg_hqxdev002/lv_root
dracut: inactive '/dev/XSLocalEXT-056fadb8-75cd-4bd8-98a3-a59e1afdd977/056fadb8-75cd-4bd8-98a3-a59e1afdd977' [278.86 GiB] inherit
dracut: inactive '/dev/XSLocalEXT-925d4f51-1afe-ae56-33ca-22e7a15dd19b/925d4f51-1afe-ae56-33ca-22e7a15dd19b' [278.86 GiB] inherit
dracut: inactive '/dev/vg_hqxdev002/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_hqxdev002/lv_home' [72.02 GiB] inherit
dracut: inactive '/dev/vg_hqxdev002/lv_swap' [13.61 GiB] inherit
bio: create slab at 1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/vg_hqxdev002-lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit: type=1404 audit(1400179354.044:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.136 (Jan 03, 2014)
xen: registering gsi 35 triggering 0 polarity 1
xen: --> pirq=35 -> irq=35 (gsi=35)
tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 90:b1:1c:06:63:f2
tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
xen: registering gsi 38 triggering 0 polarity 1
xen: --> pirq=38 -> irq=38 (gsi=38)
tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 90:b1:1c:06:63:f3
tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
xen: registering gsi 34 triggering 0 polarity 1
xen: --> pirq=34 -> irq=34 (gsi=34)
tg3 0000:02:00.0 eth2: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 90:b1:1c:06:63:f4
tg3 0000:02:00.0 eth2: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
xen: registering gsi 36 triggering 0 polarity 1
xen: --> pirq=36 -> irq=36 (gsi=36)
tg3 0000:02:00.1 eth3: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 90:b1:1c:06:63:f5
tg3 0000:02:00.1 eth3: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.1 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.1 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
WARNING! power/level is deprecated; use power/control instead
ACPI Error: No handler for Region [SYSI] (ffff88007c07f3f0) [IPMI] (20131218/evregion-162)
ACPI Error: Region IPMI (ID=7) has no handler (20131218/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88005ed068f8), AE_NOT_EXIST (20131218/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88005ed06998), AE_NOT_EXIST (20131218/psparse-536)
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20131218/power_meter-755)
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:1:0: Attached scsi generic sg1 type 0
sd 0:2:2:0: Attached scsi generic sg2 type 0
sr 5:0:0:0: Attached scsi generic sg3 type 5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Error: Driver 'processor_aggregator' is already registered, aborting...
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 10
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
ipmi_si ipmi_si.0: Using irq 10
ipmi_si ipmi_si.0: Couldn't set irq info: cc.
ipmi_si ipmi_si.0: Maybe ok, but ipmi might run very slowly.
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:3f:0e.0 (POLLED)
EDAC MC1: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#1: DEV 0000:7f:0e.0 (POLLED)
EDAC sbridge: Driver loaded.
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
xen: registering gsi 72 triggering 0 polarity 1
xen: --> pirq=72 -> irq=72 (gsi=72)
igb 0000:42:00.0: The NVM Checksum Is Not Valid
igb: probe of 0000:42:00.0 failed with error -5
input: PC Speaker as /devices/platform/pcspkr/input/input4
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
xor: automatically using best checksumming function:
avx : 25096.000 MB/sec
raid6: sse2x1 7628 MB/s
raid6: sse2x2 9511 MB/s
raid6: sse2x4 12781 MB/s
raid6: using algorithm sse2x4 (12781 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab at 2
Btrfs loaded, assert=on
BTRFS: device fsid 014e9049-f1c3-42e2-9042-74be4555cf2f devid 1 transid 5763 /dev/mapper/XSLocalEXT--925d4f51--1afe--ae56--33ca--22e7a15dd19b-925d4f51--1afe--ae56--33ca--22e7a15dd19b
BTRFS info (device dm-3): disk space caching is enabled
Adding 14270460k swap on /dev/mapper/vg_hqxdev002-lv_swap. Priority:-1 extents:1 across:14270460k FS
NET: Registered protocol family 10
Bridge firewalling registered
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
device em1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
tg3 0000:01:00.0 em1: Link is up at 1000 Mbps, full duplex
tg3 0000:01:00.0 em1: Flow control is off for TX and off for RX
tg3 0000:01:00.0 em1: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
xenbr0: port 1(em1) entered forwarding state
xenbr0: port 1(em1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
xen:xen_evtchn: Event-channel device installed
xen_pciback: backend is vpci
xenbr0: port 1(em1) entered forwarding state
device vif1.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
xenbr0: port 2(vif1.0) entered forwarding state
xenbr0: port 2(vif1.0) entered forwarding state
xenbr0: port 2(vif1.0) entered forwarding state
xenbr0: port 2(vif1.0) entered disabled state
xenbr0: port 2(vif1.0) entered disabled state
device vif1.0 left promiscuous mode
xenbr0: port 2(vif1.0) entered disabled state
device vif2.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif2.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready
xenbr0: port 2(vif2.0) entered forwarding state
xenbr0: port 2(vif2.0) entered forwarding state
xenbr0: port 2(vif2.0) entered forwarding state
device vif3.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif3.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready
xenbr0: port 3(vif3.0) entered forwarding state
xenbr0: port 3(vif3.0) entered forwarding state
xenbr0: port 3(vif3.0) entered forwarding state
xenbr0: port 3(vif3.0) entered disabled state
xenbr0: port 3(vif3.0) entered disabled state
device vif3.0 left promiscuous mode
xenbr0: port 3(vif3.0) entered disabled state
device vif5.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif5.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready
xenbr0: port 3(vif5.0) entered forwarding state
xenbr0: port 3(vif5.0) entered forwarding state
xenbr0: port 3(vif5.0) entered forwarding state
xenbr0: port 3(vif5.0) entered disabled state
xenbr0: port 3(vif5.0) entered disabled state
device vif5.0 left promiscuous mode
xenbr0: port 3(vif5.0) entered disabled state
device vif9.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif9.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready
xenbr0: port 3(vif9.0) entered forwarding state
xenbr0: port 3(vif9.0) entered forwarding state
xenbr0: port 3(vif9.0) entered forwarding state
xenbr0: port 3(vif9.0) entered disabled state
xenbr0: port 3(vif9.0) entered disabled state
device vif9.0 left promiscuous mode
xenbr0: port 3(vif9.0) entered disabled state
device vif10.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif10.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready
xenbr0: port 3(vif10.0) entered forwarding state
xenbr0: port 3(vif10.0) entered forwarding state
xenbr0: port 3(vif10.0) entered forwarding state
xenbr0: port 3(vif10.0) entered disabled state
xenbr0: port 3(vif10.0) entered disabled state
device vif10.0 left promiscuous mode
xenbr0: port 3(vif10.0) entered disabled state
device vif11.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif11.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready
xenbr0: port 3(vif11.0) entered forwarding state
xenbr0: port 3(vif11.0) entered forwarding state
xenbr0: port 3(vif11.0) entered forwarding state
xenbr0: port 3(vif11.0) entered disabled state
xenbr0: port 3(vif11.0) entered disabled state
device vif11.0 left promiscuous mode
xenbr0: port 3(vif11.0) entered disabled state
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device vif12.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif12.0: link is not ready
device vif12.0-emu entered promiscuous mode
xenbr0: port 4(vif12.0-emu) entered forwarding state
xenbr0: port 4(vif12.0-emu) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready
xenbr0: port 3(vif12.0) entered forwarding state
xenbr0: port 3(vif12.0) entered forwarding state
xenbr0: port 4(vif12.0-emu) entered forwarding state
xenbr0: port 3(vif12.0) entered forwarding state
xenbr0: port 4(vif12.0-emu) entered disabled state
device vif12.0-emu left promiscuous mode
xenbr0: port 4(vif12.0-emu) entered disabled state
xenbr0: port 3(vif12.0) entered disabled state
xenbr0: port 3(vif12.0) entered disabled state
device vif12.0 left promiscuous mode
xenbr0: port 3(vif12.0) entered disabled state
device vif13.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif13.0: link is not ready
device vif13.0-emu entered promiscuous mode
xenbr0: port 4(vif13.0-emu) entered forwarding state
xenbr0: port 4(vif13.0-emu) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif13.0: link becomes ready
xenbr0: port 3(vif13.0) entered forwarding state
xenbr0: port 3(vif13.0) entered forwarding state
xenbr0: port 4(vif13.0-emu) entered forwarding state
xenbr0: port 3(vif13.0) entered forwarding state
xenbr0: port 3(vif13.0) entered disabled state
xenbr0: port 4(vif13.0-emu) entered disabled state
device vif13.0-emu left promiscuous mode
xenbr0: port 4(vif13.0-emu) entered disabled state
xenbr0: port 3(vif13.0) entered disabled state
device vif13.0 left promiscuous mode
xenbr0: port 3(vif13.0) entered disabled state
device vif14.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif14.0: link is not ready
device vif14.0-emu entered promiscuous mode
xenbr0: port 4(vif14.0-emu) entered forwarding state
xenbr0: port 4(vif14.0-emu) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif14.0: link becomes ready
xenbr0: port 3(vif14.0) entered forwarding state
xenbr0: port 3(vif14.0) entered forwarding state
xenbr0: port 4(vif14.0-emu) entered forwarding state
xenbr0: port 3(vif14.0) entered forwarding state
xenbr0: port 3(vif14.0) entered disabled state
xenbr0: port 4(vif14.0-emu) entered disabled state
device vif14.0-emu left promiscuous mode
xenbr0: port 4(vif14.0-emu) entered disabled state
xenbr0: port 3(vif14.0) entered disabled state
device vif14.0 left promiscuous mode
xenbr0: port 3(vif14.0) entered disabled state
device vif15.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif15.0: link is not ready
device vif15.0-emu entered promiscuous mode
xenbr0: port 4(vif15.0-emu) entered forwarding state
xenbr0: port 4(vif15.0-emu) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif15.0: link becomes ready
xenbr0: port 3(vif15.0) entered forwarding state
xenbr0: port 3(vif15.0) entered forwarding state
xenbr0: port 4(vif15.0-emu) entered forwarding state
xenbr0: port 3(vif15.0) entered forwarding state
xenbr0: port 4(vif15.0-emu) entered disabled state
device vif15.0-emu left promiscuous mode
xenbr0: port 4(vif15.0-emu) entered disabled state
xenbr0: port 3(vif15.0) entered disabled state
device vif15.0 left promiscuous mode
xenbr0: port 3(vif15.0) entered disabled state
device vif16.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif16.0: link is not ready
device vif16.0-emu entered promiscuous mode
xenbr0: port 4(vif16.0-emu) entered forwarding state
xenbr0: port 4(vif16.0-emu) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif16.0: link becomes ready
xenbr0: port 3(vif16.0) entered forwarding state
xenbr0: port 3(vif16.0) entered forwarding state
xenbr0: port 4(vif16.0-emu) entered forwarding state
xenbr0: port 3(vif16.0) entered forwarding state
xenbr0: port 3(vif16.0) entered disabled state
xenbr0: port 3(vif16.0) entered disabled state
device vif16.0 left promiscuous mode
xenbr0: port 3(vif16.0) entered disabled state
xenbr0: port 4(vif16.0-emu) entered disabled state
device vif16.0-emu left promiscuous mode
xenbr0: port 4(vif16.0-emu) entered disabled state
device vif17.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif17.0: link is not ready
device vif17.0-emu entered promiscuous mode
xenbr0: port 4(vif17.0-emu) entered forwarding state
xenbr0: port 4(vif17.0-emu) entered forwarding state
xenbr0: port 4(vif17.0-emu) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif17.0: link becomes ready
xenbr0: port 3(vif17.0) entered forwarding state
xenbr0: port 3(vif17.0) entered forwarding state
xenbr0: port 3(vif17.0) entered forwarding state
device vif18.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif18.0: link is not ready
device vif18.0-emu entered promiscuous mode
xenbr0: port 6(vif18.0-emu) entered forwarding state
xenbr0: port 6(vif18.0-emu) entered forwarding state
xenbr0: port 6(vif18.0-emu) entered forwarding state
xenbr0: port 6(vif18.0-emu) entered disabled state
device vif18.0-emu left promiscuous mode
xenbr0: port 6(vif18.0-emu) entered disabled state
xenbr0: port 5(vif18.0) entered disabled state
device vif18.0 left promiscuous mode
xenbr0: port 5(vif18.0) entered disabled state
device vif19.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif19.0: link is not ready
device vif19.0-emu entered promiscuous mode
xenbr0: port 6(vif19.0-emu) entered forwarding state
xenbr0: port 6(vif19.0-emu) entered forwarding state
xenbr0: port 6(vif19.0-emu) entered forwarding state
xenbr0: port 6(vif19.0-emu) entered disabled state
device vif19.0-emu left promiscuous mode
xenbr0: port 6(vif19.0-emu) entered disabled state
xenbr0: port 5(vif19.0) entered disabled state
device vif19.0 left promiscuous mode
xenbr0: port 5(vif19.0) entered disabled state
device vif20.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif20.0: link is not ready
device vif20.0-emu entered promiscuous mode
xenbr0: port 6(vif20.0-emu) entered forwarding state
xenbr0: port 6(vif20.0-emu) entered forwarding state
xenbr0: port 6(vif20.0-emu) entered forwarding state
xenbr0: port 6(vif20.0-emu) entered disabled state
device vif20.0-emu left promiscuous mode
xenbr0: port 6(vif20.0-emu) entered disabled state
xenbr0: port 5(vif20.0) entered disabled state
device vif20.0 left promiscuous mode
xenbr0: port 5(vif20.0) entered disabled state
device vif21.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif21.0: link is not ready
device vif21.0-emu entered promiscuous mode
xenbr0: port 6(vif21.0-emu) entered forwarding state
xenbr0: port 6(vif21.0-emu) entered forwarding state
xenbr0: port 6(vif21.0-emu) entered forwarding state
device vif22.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif22.0: link is not ready
device vif22.0-emu entered promiscuous mode
xenbr0: port 8(vif22.0-emu) entered forwarding state
xenbr0: port 8(vif22.0-emu) entered forwarding state
xenbr0: port 8(vif22.0-emu) entered forwarding state
device vif23.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif23.0: link is not ready
device vif23.0-emu entered promiscuous mode
xenbr0: port 10(vif23.0-emu) entered forwarding state
xenbr0: port 10(vif23.0-emu) entered forwarding state
xenbr0: port 10(vif23.0-emu) entered forwarding state
device vif24.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif24.0: link is not ready
device vif24.0-emu entered promiscuous mode
xenbr0: port 12(vif24.0-emu) entered forwarding state
xenbr0: port 12(vif24.0-emu) entered forwarding state
xenbr0: port 12(vif24.0-emu) entered forwarding state
xen:tmem: frontswap enabled, RAM provided by Xen Transcendent Memory
xen:tmem: cleancache enabled, RAM provided by Xen Transcendent Memory
xen_selfballoon: Xen selfballooning driver disabled for domain0
device vif25.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif25.0: link is not ready
xenbr0: port 13(vif25.0) entered disabled state
device vif25.0 left promiscuous mode
xenbr0: port 13(vif25.0) entered disabled state
device vif26.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif26.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif26.0: link becomes ready
xenbr0: port 13(vif26.0) entered forwarding state
xenbr0: port 13(vif26.0) entered forwarding state
xenbr0: port 13(vif26.0) entered forwarding state
xenbr0: port 6(vif21.0-emu) entered disabled state
device vif21.0-emu left promiscuous mode
xenbr0: port 6(vif21.0-emu) entered disabled state
xenbr0: port 5(vif21.0) entered disabled state
device vif21.0 left promiscuous mode
xenbr0: port 5(vif21.0) entered disabled state
xenbr0: port 8(vif22.0-emu) entered disabled state
device vif22.0-emu left promiscuous mode
xenbr0: port 8(vif22.0-emu) entered disabled state
xenbr0: port 7(vif22.0) entered disabled state
device vif22.0 left promiscuous mode
xenbr0: port 7(vif22.0) entered disabled state
xenbr0: port 10(vif23.0-emu) entered disabled state
device vif23.0-emu left promiscuous mode
xenbr0: port 10(vif23.0-emu) entered disabled state
xenbr0: port 9(vif23.0) entered disabled state
device vif23.0 left promiscuous mode
xenbr0: port 9(vif23.0) entered disabled state
xenbr0: port 12(vif24.0-emu) entered disabled state
device vif24.0-emu left promiscuous mode
xenbr0: port 12(vif24.0-emu) entered disabled state
xenbr0: port 11(vif24.0) entered disabled state
device vif24.0 left promiscuous mode
xenbr0: port 11(vif24.0) entered disabled state
xenbr0: port 13(vif26.0) entered disabled state
xenbr0: port 13(vif26.0) entered disabled state
device vif26.0 left promiscuous mode
xenbr0: port 13(vif26.0) entered disabled state
INFO: task qemu-system-i38:24397 blocked for more than 120 seconds.
Not tainted 3.14.3-13.el6.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qemu-system-i38 D ffff88007c774440 0 24397 1 0x00000080
ffff88000096dc18 0000000000000286 0000000000000000 ffff88000096c010
0000000000014440 0000000000014440 ffff880024c51150 ffff88005bf6e190
0000000000000000 ffff8800580ad66c ffff8800580ad668 00000000ffffffff
Call Trace:
[] schedule+0x29/0x70
[] schedule_preempt_disabled+0xe/0x10
[] __mutex_lock_slowpath+0x1a4/0x240
[] mutex_lock+0x1b/0x30
[] btrfs_file_aio_write+0x8d/0x4c0 [btrfs]
[] do_sync_readv_writev+0x4d/0x80
[] do_readv_writev+0xc8/0x2c0
[] ? __btrfs_direct_write+0x140/0x140 [btrfs]
[] ? do_sync_readv_writev+0x80/0x80
[] ? xen_mc_flush+0xb0/0x1b0
[] ? xen_clocksource_read+0x20/0x30
[] ? xen_clocksource_get_cycles+0x9/0x10
[] ? __getnstimeofday+0x3e/0xc0
[] vfs_writev+0x37/0x50
[] SyS_pwritev+0xc2/0xd0
[] system_call_fastpath+0x16/0x1b
device vif28.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif28.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif28.0: link becomes ready
xenbr0: port 5(vif28.0) entered forwarding state
xenbr0: port 5(vif28.0) entered forwarding state
xenbr0: port 5(vif28.0) entered forwarding state
device vif29.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif29.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif29.0: link becomes ready
xenbr0: port 6(vif29.0) entered forwarding state
xenbr0: port 6(vif29.0) entered forwarding state
device vif30.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif30.0: link is not ready
xenbr0: port 6(vif29.0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif30.0: link becomes ready
xenbr0: port 7(vif30.0) entered forwarding state
xenbr0: port 7(vif30.0) entered forwarding state
device vif31.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif31.0: link is not ready
xenbr0: port 7(vif30.0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif31.0: link becomes ready
xenbr0: port 8(vif31.0) entered forwarding state
xenbr0: port 8(vif31.0) entered forwarding state
device vif32.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif32.0: link is not ready
xenbr0: port 8(vif31.0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif32.0: link becomes ready
xenbr0: port 9(vif32.0) entered forwarding state
xenbr0: port 9(vif32.0) entered forwarding state
xenbr0: port 9(vif32.0) entered forwarding state
device vif33.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif33.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif33.0: link becomes ready
xenbr0: port 10(vif33.0) entered forwarding state
xenbr0: port 10(vif33.0) entered forwarding state
xenbr0: port 10(vif33.0) entered forwarding state
device vif34.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif34.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif34.0: link becomes ready
xenbr0: port 11(vif34.0) entered forwarding state
xenbr0: port 11(vif34.0) entered forwarding state
device vif35.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif35.0: link is not ready
xenbr0: port 11(vif34.0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif35.0: link becomes ready
xenbr0: port 12(vif35.0) entered forwarding state
xenbr0: port 12(vif35.0) entered forwarding state
device vif36.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif36.0: link is not ready
xenbr0: port 12(vif35.0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vif36.0: link becomes ready
xenbr0: port 13(vif36.0) entered forwarding state
xenbr0: port 13(vif36.0) entered forwarding state
xenbr0: port 13(vif36.0) entered forwarding state
device vif37.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif37.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif37.0: link becomes ready
xenbr0: port 14(vif37.0) entered forwarding state
xenbr0: port 14(vif37.0) entered forwarding state
xenbr0: port 14(vif37.0) entered forwarding state
xenbr0: port 5(vif28.0) entered disabled state
xenbr0: port 5(vif28.0) entered disabled state
device vif28.0 left promiscuous mode
xenbr0: port 5(vif28.0) entered disabled state
xenbr0: port 6(vif29.0) entered disabled state
xenbr0: port 6(vif29.0) entered disabled state
device vif29.0 left promiscuous mode
xenbr0: port 6(vif29.0) entered disabled state
xenbr0: port 7(vif30.0) entered disabled state
xenbr0: port 7(vif30.0) entered disabled state
device vif30.0 left promiscuous mode
xenbr0: port 7(vif30.0) entered disabled state
xenbr0: port 8(vif31.0) entered disabled state
xenbr0: port 8(vif31.0) entered disabled state
device vif31.0 left promiscuous mode
xenbr0: port 8(vif31.0) entered disabled state
xenbr0: port 9(vif32.0) entered disabled state
xenbr0: port 9(vif32.0) entered disabled state
device vif32.0 left promiscuous mode
xenbr0: port 9(vif32.0) entered disabled state
xenbr0: port 10(vif33.0) entered disabled state
xenbr0: port 10(vif33.0) entered disabled state
device vif33.0 left promiscuous mode
xenbr0: port 10(vif33.0) entered disabled state
xenbr0: port 11(vif34.0) entered disabled state
xenbr0: port 11(vif34.0) entered disabled state
device vif34.0 left promiscuous mode
xenbr0: port 11(vif34.0) entered disabled state
xenbr0: port 12(vif35.0) entered disabled state
xenbr0: port 12(vif35.0) entered disabled state
device vif35.0 left promiscuous mode
xenbr0: port 12(vif35.0) entered disabled state
xenbr0: port 13(vif36.0) entered disabled state
xenbr0: port 13(vif36.0) entered disabled state
device vif36.0 left promiscuous mode
xenbr0: port 13(vif36.0) entered disabled state
xenbr0: port 14(vif37.0) entered disabled state
xenbr0: port 14(vif37.0) entered disabled state
device vif37.0 left promiscuous mode
xenbr0: port 14(vif37.0) entered disabled state
device vif38.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif38.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif38.0: link becomes ready
xenbr0: port 5(vif38.0) entered forwarding state
xenbr0: port 5(vif38.0) entered forwarding state
xenbr0: port 5(vif38.0) entered forwarding state
device vif39.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif39.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif39.0: link becomes ready
xenbr0: port 6(vif39.0) entered forwarding state
xenbr0: port 6(vif39.0) entered forwarding state
device vif40.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif40.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif40.0: link becomes ready
xenbr0: port 7(vif40.0) entered forwarding state
xenbr0: port 7(vif40.0) entered forwarding state
xenbr0: port 6(vif39.0) entered forwarding state
xenbr0: port 7(vif40.0) entered forwarding state
device vif42.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif42.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif42.0: link becomes ready
xenbr0: port 8(vif42.0) entered forwarding state
xenbr0: port 8(vif42.0) entered forwarding state
device vif43.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif43.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif43.0: link becomes ready
xenbr0: port 9(vif43.0) entered forwarding state
xenbr0: port 9(vif43.0) entered forwarding state
xenbr0: port 8(vif42.0) entered forwarding state
xenbr0: port 9(vif43.0) entered forwarding state
device vif44.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif44.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif44.0: link becomes ready
xenbr0: port 10(vif44.0) entered forwarding state
xenbr0: port 10(vif44.0) entered forwarding state
xenbr0: port 10(vif44.0) entered forwarding state
device vif45.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif45.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif45.0: link becomes ready
xenbr0: port 11(vif45.0) entered forwarding state
xenbr0: port 11(vif45.0) entered forwarding state
xenbr0: port 11(vif45.0) entered forwarding state
device vif46.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif46.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif46.0: link becomes ready
xenbr0: port 12(vif46.0) entered forwarding state
xenbr0: port 12(vif46.0) entered forwarding state
xenbr0: port 12(vif46.0) entered forwarding state
device vif47.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif47.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif47.0: link becomes ready
xenbr0: port 13(vif47.0) entered forwarding state
xenbr0: port 13(vif47.0) entered forwarding state
xenbr0: port 13(vif47.0) entered forwarding state
device vif48.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif48.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif48.0: link becomes ready
xenbr0: port 14(vif48.0) entered forwarding state
xenbr0: port 14(vif48.0) entered forwarding state
xenbr0: port 14(vif48.0) entered forwarding state
device vif49.0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vif49.0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): vif49.0: link becomes ready
xenbr0: port 15(vif49.0) entered forwarding state
xenbr0: port 15(vif49.0) entered forwarding state
xenbr0: port 15(vif49.0) entered forwarding state