dmesg - 7
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.17.1.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed May 7 14:14:17 CDT 2014
Command line: ro root=/dev/mapper/vg_dragon-LogVol00 rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_dragon/LogVol01 rd_LVM_LV=vg_dragon/LogVol00 rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000ce6c1000 (usable)
BIOS-e820: 00000000ce6c1000 - 00000000ce9b5000 (reserved)
BIOS-e820: 00000000ce9b5000 - 00000000ceda9000 (ACPI NVS)
BIOS-e820: 00000000ceda9000 - 00000000cf165000 (reserved)
BIOS-e820: 00000000cf165000 - 00000000cf166000 (usable)
BIOS-e820: 00000000cf166000 - 00000000cf36c000 (ACPI NVS)
BIOS-e820: 00000000cf36c000 - 00000000cf800000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100001000 - 0000000430000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF04C0
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970A-DS3, BIOS FD 01/23/2013
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CF800000 mask FFFFFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000430000000 aka 17152M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
total RAM covered: 3320M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
e820 update range: 00000000cf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cf800000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cf800000 page 2M
kernel direct mapping tables up to cf800000 @ 10000-12000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000430000000
0100000000 - 0400000000 page 1G
0400000000 - 0430000000 page 2M
kernel direct mapping tables up to 430000000 @ 11000-13000
RAMDISK: 36f26000 - 37fef84f
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000ced99070 0005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ced9ef40 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-561)
ACPI: DSDT 00000000ced99160 05DE0 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000ceda3f80 00040
ACPI: APIC 00000000ced9f038 0007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ced9f0b8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000ced9f100 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000ced9f140 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: BGRT 00000000ced9f178 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000ced9f1b0 008BC (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000430000000
Bootmem setup node 0 0000000000000000-0000000430000000
NODE_DATA [0000000000012000 - 0000000000045fff]
bootmap [0000000000100000 - 0000000000185fff] pages 86
(8 early reservations) ==> bootmem [0000000000 - 0430000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [0036f26000 - 0037fef84f] RAMDISK ==> [0036f26000 - 0037fef84f]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0002021000 - 00020212a5] BRK ==> [0002021000 - 00020212a5]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000011000 - 0000012000] PGTABLE ==> [0000011000 - 0000012000]
found SMP MP-table at [ffff8800000fd7e0] fd7e0
Reserving 130MB of memory at 48MB for crashkernel (System RAM: 17152MB)
[ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00430000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000ce6c1
0: 0x000cf165 -> 0x000cf166
0: 0x000cf36c -> 0x000cf800
0: 0x00100001 -> 0x00430000
On node 0 totalpages: 4188900
DMA zone: 56 pages used for memmap
DMA zone: 101 pages reserved
DMA zone: 3826 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 828302 pages, LIFO batch:31
Normal zone: 45696 pages used for memmap
Normal zone: 3296639 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000ce6c1000 - 00000000ce9b5000
PM: Registered nosave memory: 00000000ce9b5000 - 00000000ceda9000
PM: Registered nosave memory: 00000000ceda9000 - 00000000cf165000
PM: Registered nosave memory: 00000000cf166000 - 00000000cf36c000
PM: Registered nosave memory: 00000000cf800000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
Allocating PCI resources starting at cf800000 (gap: cf800000:28800000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u524288
pcpu-alloc: s94872 r8192 d23912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128767
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_dragon-LogVol00 rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=130M@0M rd_LVM_LV=vg_dragon/LogVol01 rd_LVM_LV=vg_dragon/LogVol00 rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ f8000000 size 64 MB
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 16356244k/17563648k available (5326k kernel code, 808048k absent, 399356k reserved, 7013k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:984
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3415.518 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6831.03 BogoMIPS (lpj=3415518)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 00cf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21778 entries in 86 pages
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
System has AMD C1E enabled
Switch to broadcast mode on CPU1
#2
Switch to broadcast mode on CPU2
#3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (27324.14 BogoMIPS).
Switch to broadcast mode on CPU0
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
Switch to broadcast mode on CPU3
devtmpfs: initialized
PM: Registering ACPI NVS region at ce9b5000 (4145152 bytes)
PM: Registering ACPI NVS region at cf166000 (2121728 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 0: io port [d000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [d0000000, fef0ffff] ==> [d0000000, dfffffff] and [f0000000, fef0ffff]
TOM2: 0000000430000000 aka 17152M
bus: [00, 1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x430000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fe0fb0), AE_NOT_FOUND
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 24: [mem 0xfe20b000-0xfe20b3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: reg 10: [mem 0xfe20a000-0xfe20afff]
pci 0000:00:12.2: reg 10: [mem 0xfe209000-0xfe2090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfe208000-0xfe208fff]
pci 0000:00:13.2: reg 10: [mem 0xfe207000-0xfe2070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
pci 0000:00:14.2: reg 10: [mem 0xfe200000-0xfe203fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10: [mem 0xfe206000-0xfe206fff]
pci 0000:00:16.0: reg 10: [mem 0xfe205000-0xfe205fff]
pci 0000:00:16.2: reg 10: [mem 0xfe204000-0xfe2040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xfe100000-0xfe107fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xfff000-0x0000] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 18: [mem 0xda104000-0xda104fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xda100000-0xda103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 03-03]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:09.0: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c51]
pnp 00:02: [io 0x0c52]
pnp 00:02: [io 0x0c6c]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cd5]
pnp 00:02: [io 0x0cd6-0x0cd7]
pnp 00:02: [io 0x0cd8-0x0cdf]
pnp 00:02: [io 0x0800-0x089f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [io 0x0900-0x090f]
pnp 00:02: [io 0x0910-0x091f]
pnp 00:02: [io 0xfe00-0xfefe]
pnp 00:02: [io 0x0060-0x005f disabled]
pnp 00:02: [io 0x0064-0x0063 disabled]
pnp 00:02: [mem 0xfec00000-0xfec00fff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xfed80000-0xfed8ffff]
pnp 00:02: [mem 0xfed61000-0xfed70fff]
pnp 00:02: [mem 0xfec10000-0xfec10fff]
pnp 00:02: [mem 0xfed00000-0xfed00fff]
pnp 00:02: [mem 0xffc00000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0220-0x0227]
pnp 00:03: [io 0x0228-0x0237]
pnp 00:03: [io 0x0a20-0x0a2f]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x0060]
pnp 00:04: [io 0x0064]
pnp 00:04: [irq 1]
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:06: [dma 4]
pnp 00:06: [io 0x0000-0x000f]
pnp 00:06: [io 0x0081-0x0083]
pnp 00:06: [io 0x0087]
pnp 00:06: [io 0x0089-0x008b]
pnp 00:06: [io 0x008f]
pnp 00:06: [io 0x00c0-0x00df]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0061]
pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0d: [mem 0xfec20000-0xfec200ff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c51] has been reserved
system 00:02: [io 0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x089f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0900-0x090f] has been reserved
system 00:02: [io 0x0910-0x091f] has been reserved
system 00:02: [io 0xfe00-0xfefe] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
system 00:03: [io 0x0220-0x0227] has been reserved
system 00:03: [io 0x0228-0x0237] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:0d: [mem 0xfec20000-0xfec200ff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 03-03]
pci 0000:00:09.0: PCI bridge to [bus 03-03]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem disabled]
pci 0000:00:09.0: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem pref disabled]
alloc irq_desc for 52 on node 0
alloc kstat_irqs on node 0
pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 53 on node 0
alloc kstat_irqs on node 0
pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:09.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 10 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: PCI INT A disabled
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:16.0: PCI INT A disabled
pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:16.2: PCI INT B disabled
pci 0000:01:00.0: Boot video device
alloc irq_desc for 44 on node 0
alloc kstat_irqs on node 0
pci 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
pci 0000:02:00.0: PCI INT A disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17190k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f8000000 size 65536 KB
init_memory_mapping: 00000000f8000000-00000000fc000000
00f8000000 - 00fc000000 page 2M
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1399927961.471:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31979
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 906A9FD062DE1E26
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe209000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe207000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe204000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe20a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe208000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe206000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe205000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2014-05-12 20:52:42 UTC (1399927962)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1584k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
dracut: dracut-004-336.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:11.0: version 3.0
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b280 irq 19
ata4: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 3415.677 MHz.
Switching to clocksource tsc
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-8: WDC WD10EZEX-00KUWA0, 15.01H15, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata1.00: ATAPI: ATAPI iHAS124 C, LL02, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM ATAPI iHAS124 C LL02 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA WDC WD10EZEX-00K 15.0 PQ: 0 ANSI: 5
pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
xhci_hcd 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
xhci_hcd 0000:02:00.0: setting latency timer to 64
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
alloc irq_desc for 56 on node 0
alloc kstat_irqs on node 0
xhci_hcd 0000:02:00.0: irq 56 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
usb usb8: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 2.6.32-431.17.1.el6.x86_64 xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
usb usb9: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sdb:
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sdb1 sdb2
sd 2:0:0:0: [sdb] Attached SCSI disk
sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
usb 8-2: new high speed USB device number 2 using xhci_hcd
usb 8-2: New USB device found, idVendor=0e66, idProduct=0018
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: 802.11 n WLAN
usb 8-2: Manufacturer: Ralink
usb 8-2: SerialNumber: 1.0
usb 8-2: configuration #1 chosen from 1 choice
dracut: Scanning devices sdb2 for LVM logical volumes vg_dragon/LogVol01 vg_dragon/LogVol00
dracut: inactive '/dev/vg_dragon/LogVol01' [15.62 GiB] inherit
dracut: inactive '/dev/vg_dragon/LogVol00' [58.59 GiB] inherit
dracut: inactive '/dev/vg_dragon/LogVol02' [857.09 GiB] inherit
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_dragon-LogVol00
dracut: Loading SELinux policy
type=1404 audit(1399927964.580:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 282731 rules.
SELinux: 2048 avtab hash slots, 282731 rules.
SELinux: 9 users, 12 roles, 4019 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 282731 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-1, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1399927965.662:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 May 7 2014
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
nvidia 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 334.21 Thu Feb 27 15:55:45 PST 2014
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
r8169 0000:03:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
r8169 0000:03:00.0: setting latency timer to 64
alloc irq_desc for 57 on node 0
alloc kstat_irqs on node 0
r8169 0000:03:00.0: irq 57 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000184e000, 94:de:80:75:11:b8, XID 0c900800 IRQ 57
r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cfg80211: Calling CRDA to update world regulatory domain
usb 8-2: reset high speed USB device number 2 using xhci_hcd
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804248ef848
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804248ef800
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804248ef890
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804248ef8d8
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804248ef920
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804248ef968
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804248ef9b0
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800usb-phy0::radio
Registered led device: rt2800usb-phy0::assoc
Registered led device: rt2800usb-phy0::quality
usbcore: registered new interface driver rt2800usb
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
microcode: CPU0: patch_level=0x10000c8
microcode: CPU1: patch_level=0x10000c8
microcode: CPU2: patch_level=0x10000c8
microcode: CPU3: patch_level=0x10000c8
Microcode Update Driver: v2.00 , Peter Oruba
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sdb1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 16383992k swap on /dev/mapper/vg_dragon-LogVol01. Priority:-1 extents:1 across:16383992k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3400 MHz)
powernow-k8: 1 : pstate 1 (2700 MHz)
powernow-k8: 2 : pstate 2 (2200 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
rt2800usb 8-2:1.0: firmware: requesting rt2870.bin
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
ADDRCONF(NETDEV_UP): wlan0: link is not ready
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
r8169 0000:03:00.0: firmware: requesting rtl_nic/rtl8168e-3.fw
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
8021q: adding VLAN 0 to HW filter on device virbr0
Ebtables v2.0 registered
alloc irq_desc for 58 on node 0
alloc kstat_irqs on node 0
nvidia 0000:01:00.0: irq 58 for MSI/MSI-X
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.13)
wlan0: authenticate with 48:f8:b3:6f:fb:7f
wlan0: send auth to 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: authenticated
wlan0: associate with 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: RX AssocResp from 48:f8:b3:6f:fb:7f (capab=0x411 status=0 aid=6)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
usb 8-2: USB disconnect, device number 2
ieee80211 phy0: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
wlan0: deauthenticating from 48:f8:b3:6f:fb:7f by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
usb 8-2: new high speed USB device number 3 using xhci_hcd
usb 8-2: New USB device found, idVendor=0e66, idProduct=0018
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: 802.11 n WLAN
usb 8-2: Manufacturer: Ralink
usb 8-2: SerialNumber: 1.0
usb 8-2: configuration #1 chosen from 1 choice
usb 8-2: reset high speed USB device number 3 using xhci_hcd
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040d764048
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040d764000
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040d764090
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040d7640d8
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040d764120
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040d764168
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040d7641b0
ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800usb-phy1::radio
Registered led device: rt2800usb-phy1::assoc
Registered led device: rt2800usb-phy1::quality
ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
rt2800usb 8-2:1.0: firmware: requesting rt2870.bin
ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 48:f8:b3:6f:fb:7f
wlan0: send auth to 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: authenticated
wlan0: associate with 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: RX AssocResp from 48:f8:b3:6f:fb:7f (capab=0x411 status=0 aid=6)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
ieee80211 phy1: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
ieee80211 phy1: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
ieee80211 phy1: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 0
usb 8-2: USB disconnect, device number 3
ieee80211 phy1: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy1: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy1: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy1: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
wlan0: deauthenticating from 48:f8:b3:6f:fb:7f by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
usb 8-2: new high speed USB device number 4 using xhci_hcd
usb 8-2: New USB device found, idVendor=0e66, idProduct=0018
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: 802.11 n WLAN
usb 8-2: Manufacturer: Ralink
usb 8-2: SerialNumber: 1.0
usb 8-2: configuration #1 chosen from 1 choice
usb 8-2: reset high speed USB device number 4 using xhci_hcd
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411cf3648
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411cf3600
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411cf3690
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411cf36d8
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411cf3720
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411cf3768
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411cf37b0
ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800usb-phy2::radio
Registered led device: rt2800usb-phy2::assoc
Registered led device: rt2800usb-phy2::quality
ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
rt2800usb 8-2:1.0: firmware: requesting rt2870.bin
ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 48:f8:b3:6f:fb:7f
wlan0: send auth to 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: authenticated
wlan0: associate with 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: RX AssocResp from 48:f8:b3:6f:fb:7f (capab=0x411 status=0 aid=6)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
usb 8-2: USB disconnect, device number 4
ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
ieee80211 phy2: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy2: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
wlan0: deauthenticating from 48:f8:b3:6f:fb:7f by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
usb 8-2: new high speed USB device number 5 using xhci_hcd
usb 8-2: New USB device found, idVendor=0e66, idProduct=0018
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: 802.11 n WLAN
usb 8-2: Manufacturer: Ralink
usb 8-2: SerialNumber: 1.0
usb 8-2: configuration #1 chosen from 1 choice
usb 8-2: reset high speed USB device number 5 using xhci_hcd
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880367a74e48
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880367a74e00
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880367a74e90
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880367a74ed8
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880367a74f20
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880367a74f68
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880367a74fb0
ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800usb-phy3::radio
Registered led device: rt2800usb-phy3::assoc
Registered led device: rt2800usb-phy3::quality
ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
rt2800usb 8-2:1.0: firmware: requesting rt2870.bin
ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 48:f8:b3:6f:fb:7f
wlan0: send auth to 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: authenticated
wlan0: associate with 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: RX AssocResp from 48:f8:b3:6f:fb:7f (capab=0x411 status=0 aid=6)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
wlan0: AP 48:f8:b3:6f:fb:7f changed bandwidth, new config is 2422 MHz, width 1 (2422/0 MHz)
wlan0: AP 48:f8:b3:6f:fb:7f changed bandwidth, new config is 2422 MHz, width 2 (2432/0 MHz)
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: authenticate with 48:f8:b3:6f:fb:7f
wlan0: send auth to 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: authenticated
wlan0: associate with 48:f8:b3:6f:fb:7f (try 1/3)
wlan0: RX AssocResp from 48:f8:b3:6f:fb:7f (capab=0x411 status=0 aid=6)
wlan0: associated
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 0
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy3: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2