dmesg - test

Return To test System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf4d5fff] usable
BIOS-e820: [mem 0x00000000bf4d6000-0x00000000bf4e0fff] reserved
BIOS-e820: [mem 0x00000000bf4e1000-0x00000000bf52cfff] usable
BIOS-e820: [mem 0x00000000bf52d000-0x00000000bf52ffff] reserved
BIOS-e820: [mem 0x00000000bf530000-0x00000000bf5bafff] usable
BIOS-e820: [mem 0x00000000bf5bb000-0x00000000bf5befff] reserved
BIOS-e820: [mem 0x00000000bf5bf000-0x00000000bf679fff] usable
BIOS-e820: [mem 0x00000000bf67a000-0x00000000bf6befff] ACPI NVS
BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf6fffff] ACPI data
BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard HP G7000 Notebook PC/30D9, BIOS F.07 08/23/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0FFFE0000 mask FFFFE0000 write-protect
  1 base 000000000 mask F00000000 write-back
  2 base 0C0000000 mask FC0000000 uncachable
  3 base 0BF800000 mask FFF800000 uncachable
  4 base 0BF700000 mask FFFF00000 uncachable
  5 base 100000000 mask FC0000000 write-back
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [c00fe270]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
 [mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
 [mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
 [mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b88000, 0x01b88fff] PGTABLE
RAMDISK: [mem 0x35c2c000-0x36e0dfff]
ACPI: RSDP 000fe020 000024 (v02 HP    )
ACPI: XSDT bf6fe120 000064 (v01 HPQOEM SLIC-MPC 00000001      01000013)
ACPI: FACP bf6fd000 0000F4 (v04 HP     SPARTAN  00000001 LOHR 00000000)
ACPI: DSDT bf6f5000 007E50 (v01 HP     SPARTAN  00000001 LOHR 00000000)
ACPI: FACS bf67f000 000040
ACPI: APIC bf6f4000 000068 (v02 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: HPET bf6f3000 000038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: MCFG bf6f2000 00003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: ASF! bf6f1000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: SLIC bf6f0000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: BOOT bf6ef000 000028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: SSDT bf6ee000 0004C4 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
4228MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
BRK [0x01b89000, 0x01b89fff] PGTABLE
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  Normal   [mem 0x01000000-0x37bfdfff]
  HighMem  [mem 0x37bfe000-0x3fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0xbf4d5fff]
  node   0: [mem 0xbf4e1000-0xbf52cfff]
  node   0: [mem 0xbf530000-0xbf5bafff]
  node   0: [mem 0xbf5bf000-0xbf679fff]
  node   0: [mem 0x00000000-0x3fffffff]
On node 0 totalpages: 1046022
free_area_init_node: node 0, pgdat c1990a80, node_mem_map f342c020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 224254 pages, LIFO batch:31
  HighMem zone: 8457 pages used for memmap
  HighMem zone: 817770 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bcf000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1044238
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 10485752 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00140000)
Memory: 4101700K/4184088K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 82388K reserved, 3271080K highmem)
virtual kernel memory layout:
    fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc19ae000 - 0xc1a88000   ( 872 kB)
      .data : 0xc165b0b2 - 0xc19ad4c0   (3401 kB)
      .text : 0xc1000000 - 0xc165b0b2   (6508 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f3008000 soft=f300a000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1462.879 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2925.75 BogoMIPS (lpj=5851516)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (c1a88000 - c1a90000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27695 entries in 55 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU 1 irqstacks, hard=f30ec000 soft=f30ee000
x86: Booting SMP configuration:
Initializing CPU#1
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (5851.51 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf67a000-0xbf6befff] (282624 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:30:45, date: 04/28/14
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT bf67ec90 0001EA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0001EA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT bf67d610 0005D7 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0005D7 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT bf67ef10 0000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT bf680d10 000083 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 000083 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI : EC: GPE storm detected(10 GPEs), transactions will use polling mode
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20131115/nsarguments-189)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 1f 0 
acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd10fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x30d0-0x30d7]
pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xd1100000-0xd11fffff 64bit]
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd2400000-0xd2403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x3080-0x309f]
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x3060-0x307f]
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x3040-0x305f]
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd2404800-0xd2404bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io  0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x30c8-0x30cf]
pci 0000:00:1f.1: reg 0x14: [io  0x30e4-0x30e7]
pci 0000:00:1f.1: reg 0x18: [io  0x30c0-0x30c7]
pci 0000:00:1f.1: reg 0x1c: [io  0x30e0-0x30e3]
pci 0000:00:1f.1: reg 0x20: [io  0x30a0-0x30af]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x30b8-0x30bf]
pci 0000:00:1f.2: reg 0x14: [io  0x30dc-0x30df]
pci 0000:00:1f.2: reg 0x18: [io  0x30b0-0x30b7]
pci 0000:00:1f.2: reg 0x1c: [io  0x30d8-0x30db]
pci 0000:00:1f.2: reg 0x20: [io  0x3020-0x303f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd2404000-0xd24047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd2404c00-0xd2404cff]
pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]
pci 0000:01:00.0: [14e4:4311] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xd1300000-0xd1303fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xd1300000-0xd23fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:02:01.0: [10ec:8139] type 00 class 0x020000
pci 0000:02:01.0: reg 0x10: [io  0x1000-0x10ff]
pci 0000:02:01.0: reg 0x14: [mem 0xd1200000-0xd12000ff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1e.0:   bridge window [mem 0xd1200000-0xd12fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: Enabled 8 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf4d6000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf52d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf5bb000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf67a000-0xbfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io  0x1000-0x1fff]
system 00:00: [io  0x0600-0x060f] has been reserved
system 00:00: [io  0x0610] has been reserved
system 00:00: [io  0x0800-0x080f] has been reserved
system 00:00: [io  0x0810-0x0817] has been reserved
system 00:00: [io  0x0400-0x047f] could not be reserved
system 00:00: [io  0x0500-0x053f] has been reserved
system 00:00: [io  0xff2c-0xff2f] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1f.0: BAR 13: [io  0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xd1300000-0xd23fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1e.0:   bridge window [mem 0xd1200000-0xd12fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd1300000-0xd23fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xd1200000-0xd12fffff]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18312K (f5c2c000 - f6e0e000)
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1398681045.328:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1658
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (0 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xd2404800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 10:628:528
rtc_cmos 00:02: setting system clock to 2014-04-28 10:30:46 UTC (1398681046)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1.00: ATAPI: Slimtype DVD A  DS8A1P, CH69, max MWDMA2
ata1.00: configured for MWDMA2
isapnp: No Plug & Play device found
ACPI: Battery Slot [BAT0] (battery present)
scsi 0:0:0:0: CD-ROM            Slimtype DVD A  DS8A1P    CH69 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
Write protecting the kernel text: 6512k
Write protecting the kernel read-only data: 2756k
NX-protecting the kernel data: 5776k
systemd-udevd[100]: starting version 204
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems 
8139too: 8139too Fast Ethernet driver 0.9.28
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata3: SATA max UDMA/133 abar m2048@0xd2404000 port 0xd2404100 irq 41
ata4: DUMMY
ata5: DUMMY
8139too 0000:02:01.0 eth0: RealTek RTL8139 at 0x00011000, 00:1b:38:7f:65:6f, IRQ 16
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-8: WDC WD5000BPVT-00HXZT3, 01.01A01, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-0 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 111 bits of entropy available
random: nonblocking pool is initialized
Adding 2085884k swap on /dev/sda5.  Priority:-1 extents:1 across:2085884k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[312]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMBA 1 (20131115/utaddress-251)
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMA1 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
cfg80211: Calling CRDA to update world regulatory domain
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
[drm] Memory usable by graphics device = 512M
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
device-mapper: multipath: version 1.6.0 loaded
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or  required key missing - tainting kernel
gpio_ich: GPIO from 206 to 255 on gpio_ich
malloc in abgphy done
INFO @wl_cfg80211_attach : Registered CFG80211 phy
lib80211_crypt: registered algorithm 'TKIP'
wlan0: Broadcom BCM4311 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
input: HP WMI hotkeys as /devices/virtual/input/input7
systemd-udevd[349]: renamed network interface wlan0 to wlan1
Console: switching to colour frame buffer device 160x50
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:16: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
hda_codec: CX20549 (Venice): BIOS auto-probing.
autoconfig: line_outs=1 (0x10/0x0/0x0/0x0/0x0) type:speaker
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   inputs:
     Internal Mic=0x14
     Mic=0x12
hda_codec: Enable sync_write for stable communication
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input8
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
type=1400 audit(1398681058.004:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=429 comm="apparmor_parser"
type=1400 audit(1398681058.004:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=429 comm="apparmor_parser"
type=1400 audit(1398681058.004:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=429 comm="apparmor_parser"
type=1400 audit(1398681058.004:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=421 comm="apparmor_parser"
type=1400 audit(1398681058.004:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=421 comm="apparmor_parser"
type=1400 audit(1398681058.004:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=421 comm="apparmor_parser"
type=1400 audit(1398681058.004:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=429 comm="apparmor_parser"
type=1400 audit(1398681058.004:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=429 comm="apparmor_parser"
type=1400 audit(1398681058.004:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=421 comm="apparmor_parser"
type=1400 audit(1398681058.004:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=421 comm="apparmor_parser"
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: failsafe main process (539) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: avahi-cups-reload main process (706) terminated with status 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
8139too 0000:02:01.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit_printk_skb: 33 callbacks suppressed
type=1400 audit(1398681064.944:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=829 comm="apparmor_parser"
type=1400 audit(1398681065.032:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=869 comm="apparmor_parser"
type=1400 audit(1398681065.032:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=869 comm="apparmor_parser"
type=1400 audit(1398681065.032:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=869 comm="apparmor_parser"
type=1400 audit(1398681065.036:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=869 comm="apparmor_parser"
type=1400 audit(1398681065.036:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=869 comm="apparmor_parser"
type=1400 audit(1398681065.036:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=869 comm="apparmor_parser"
type=1400 audit(1398681065.232:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=868 comm="apparmor_parser"
type=1400 audit(1398681065.232:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=868 comm="apparmor_parser"
type=1400 audit(1398681065.232:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=868 comm="apparmor_parser"
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
usb 1-3: new high-speed USB device number 2 using ehci-pci
usb 1-3: New USB device found, idVendor=090c, idProduct=1000
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB DISK
usb 1-3: Manufacturer: SMI Corporation
usb 1-3: SerialNumber: AA57013000009892
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi5 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
scsi 5:0:0:0: Direct-Access     INTENSO  USB              1100 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-hostnamed[2241]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): Filesystem has been set read-only
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
FAT-fs (sdb1): error, fat_bmap_cluster: request beyond EOF (i_pos 7726)
usb 1-3: USB disconnect, device number 2
usb 1-3: new high-speed USB device number 3 using ehci-pci
usb 1-3: New USB device found, idVendor=090c, idProduct=1000
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB DISK
usb 1-3: Manufacturer: SMI Corporation
usb 1-3: SerialNumber: AA57013000009892
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi6 : usb-storage 1-3:1.0
scsi 6:0:0:0: Direct-Access     INTENSO  USB              1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-3: USB disconnect, device number 3
usb 1-3: new high-speed USB device number 4 using ehci-pci
usb 1-3: New USB device found, idVendor=05ac, idProduct=1294
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: iPhone
usb 1-3: Manufacturer: Apple Inc.
usb 1-3: SerialNumber: 46384eb2fffda5a58cb43d15ac3e47f4efe57f42
ipheth 1-3:4.2: ipheth_get_macaddr: usb_control_msg: -110
ipheth: probe of 1-3:4.2 failed with error -110
usbcore: registered new interface driver ipheth
systemd-hostnamed[2601]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 1-3: USB disconnect, device number 4
perf samples too long (5026 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf samples too long (10014 > 10000), lowering kernel.perf_event_max_sample_rate to 12500

Return To test System Information