dmesg - 01
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x000000009ffaffff] usable
BIOS-e820: [mem 0x000000009ffb0000-0x00000000a13affff] reserved
BIOS-e820: [mem 0x00000000a13b0000-0x00000000aa3befff] usable
BIOS-e820: [mem 0x00000000aa3bf000-0x00000000aaebefff] reserved
BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Dell Inc. Inspiron 3521/0NT0M2, BIOS A04 11/21/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x14f600 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 0A0000000 mask FF8000000 write-back
3 base 0A8000000 mask FFE000000 write-back
4 base 0AA000000 mask FFF000000 write-back
5 base 0FFA00000 mask FFFE00000 write-protect
6 base 0FFC00000 mask FFFC00000 write-protect
7 base 100000000 mask F80000000 write-back
8 base 14F600000 mask FFFE00000 uncachable
9 base 14F800000 mask FFF800000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x36334000-0x37191fff]
ACPI: RSDP 000fe020 00024 (v02 DELL )
ACPI: XSDT aaffe210 0008C (v01 DELL CL09 00000001 01000013)
ACPI: FACP aaffb000 0010C (v05 DELL CL09 00000001 ASL 00040000)
ACPI: DSDT aafee000 092F2 (v01 DELL CL09 00000000 ASL 00040000)
ACPI: FACS aafb9000 00040
ACPI: UEFI aaffd000 00236 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: ASF! aaffc000 000A5 (v32 DELL CL09 00000001 ASL 00040000)
ACPI: HPET aaffa000 00038 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: APIC aaff9000 0008C (v03 DELL CL09 00000001 ASL 00040000)
ACPI: MCFG aaff8000 0003C (v01 DELL CL09 00000001 ASL 00040000)
ACPI: SSDT aafed000 006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
ACPI: BOOT aafeb000 00028 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: ASPT aafe9000 00034 (v07 DELL CL09 00000001 ASL 00040000)
ACPI: DBGP aafe8000 00034 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: FPDT aafe6000 00044 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: SSDT aafe5000 00758 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT aafe4000 00A92 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
4474MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x4f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0x9ffaffff]
node 0: [mem 0xa13b0000-0xaa3befff]
node 0: [mem 0xaafff000-0xaaffffff]
node 0: [mem 0x00000000-0x4f5fffff]
On node 0 totalpages: 1016141
free_area_init_node: node 0, pgdat c18a0840, node_mem_map f3944200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 221990 pages, LIFO batch:31
HighMem zone: 8949 pages used for memmap
HighMem zone: 779469 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7b7a000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1005408
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
allocated 10989440 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0014f600)
Memory: 3984240k/5494784k available (5956k kernel code, 80324k reserved, 2928k data, 756k init, 3153672k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc18ae000 - 0xc196b000 ( 756 kB)
.data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
.text : 0xc1000000 - 0xc15d1358 (5956 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f740a000 soft=f740c000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1396.827 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.65 BogoMIPS (lpj=5587308)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 24585 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i3-2365M CPU @ 1.40GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f7554000 soft=f7556000
Initializing CPU#1
Booting Node 0, Processors #1
CPU 2 irqstacks, hard=f7590000 soft=f7592000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f759c000 soft=f759e000
Initializing CPU#3
#3
Brought up 4 CPUs
Total of 4 processors activated (11174.61 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
dummy:
RTC time: 11:13:12, date: 04/28/14
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT aae17018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
ACPI: SSDT aae18a98 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
ACPI: SSDT aae16d98 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0xafa00000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0xafa00000-0xfeafffff]
pci 0000:00:00.0: >[8086:0104] type 00 class 0x060000
pci 0000:00:02.0: >[8086:0116] type 00 class 0x030000
pci 0000:00:02.0: >reg 10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: >reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: >reg 20: [io 0x3000-0x303f]
pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: >reg 10: [mem 0xc0600000-0xc060ffff 64bit]
pci 0000:00:14.0: >PME# supported from D3hot D3cold
pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xc0614000-0xc061400f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: >reg 10: [mem 0xc0619000-0xc06193ff]
pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xc0610000-0xc0613fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: >reg 10: [mem 0xc0618000-0xc06183ff]
pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: >[8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: >reg 10: [io 0x3088-0x308f]
pci 0000:00:1f.2: >reg 14: [io 0x3094-0x3097]
pci 0000:00:1f.2: >reg 18: [io 0x3080-0x3087]
pci 0000:00:1f.2: >reg 1c: [io 0x3090-0x3093]
pci 0000:00:1f.2: >reg 20: [io 0x3060-0x307f]
pci 0000:00:1f.2: >reg 24: [mem 0xc0617000-0xc06177ff]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xc0615000-0xc06150ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0x3040-0x305f]
pci 0000:01:00.0: >[10ec:8136] type 00 class 0x020000
pci 0000:01:00.0: >reg 10: [io 0x2000-0x20ff]
pci 0000:01:00.0: >reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
pci 0000:01:00.0: >reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:01:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: >PCI bridge to [bus 01-01]
pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: > bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:02:00.0: >[168c:0032] type 00 class 0x028000
pci 0000:02:00.0: >reg 10: [mem 0xc0500000-0xc057ffff 64bit]
pci 0000:02:00.0: >reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:02:00.0: >supports D1 D2
pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: >PCI bridge to [bus 02-02]
pci 0000:00:1c.1: > bridge window [mem 0xc0500000-0xc05fffff]
pci_bus 0000:00: >on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
_OSC request data:1 1f 1f
pci0000:00: >Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
pci0000:00: >ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x9ffb0000-0x9fffffff]
e820: reserve RAM buffer [mem 0xaa3bf000-0xabffffff]
e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-fe]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0xafa00000-0xfeafffff window]
pnp 00:00: >[mem 0x00010000-0x0001ffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io 0x0000-0x001f]
pnp 00:01: >[io 0x0081-0x0091]
pnp 00:01: >[io 0x0093-0x009f]
pnp 00:01: >[io 0x00c0-0x00df]
pnp 00:01: >[dma 4]
pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: >[mem 0xff010000-0xffffffff]
pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: >[io 0x00f0]
pnp 00:04: >[irq 13]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: >[io 0x002e-0x002f]
pnp 00:05: >[io 0x004e-0x004f]
pnp 00:05: >[io 0x0061]
pnp 00:05: >[io 0x0063]
pnp 00:05: >[io 0x0065]
pnp 00:05: >[io 0x0067]
pnp 00:05: >[io 0x0070]
pnp 00:05: >[io 0x0080]
pnp 00:05: >[io 0x0092]
pnp 00:05: >[io 0x00b2-0x00b3]
pnp 00:05: >[io 0x0680-0x069f]
pnp 00:05: >[io 0x1000-0x100f]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0x0400-0x0453]
pnp 00:05: >[io 0x0458-0x047f]
pnp 00:05: >[io 0x0500-0x057f]
pnp 00:05: >[io 0x164e-0x164f]
pnp 00:05: >[io 0xfd60-0xfd63]
system 00:05: >[io 0x0680-0x069f] has been reserved
system 00:05: >[io 0x1000-0x100f] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0x0400-0x0453] has been reserved
system 00:05: >[io 0x0458-0x047f] has been reserved
system 00:05: >[io 0x0500-0x057f] has been reserved
system 00:05: >[io 0x164e-0x164f] has been reserved
system 00:05: >[io 0xfd60-0xfd63] has been reserved
system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: >[io 0x0070-0x0077]
pnp 00:06: >[irq 8]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: >[io 0x0454-0x0457]
system 00:07: >[io 0x0454-0x0457] has been reserved
system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: >[io 0x0060]
pnp 00:08: >[io 0x0064]
pnp 00:08: >[irq 1]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: >[irq 12]
pnp 00:09: >Plug and Play ACPI device, IDs DLL0597 PNP0f13 (active)
pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: >[mem 0xfed10000-0xfed17fff]
pnp 00:0a: >[mem 0xfed18000-0xfed18fff]
pnp 00:0a: >[mem 0xfed19000-0xfed19fff]
pnp 00:0a: >[mem 0xe0000000-0xefffffff]
pnp 00:0a: >[mem 0xfed20000-0xfed3ffff]
pnp 00:0a: >[mem 0xfed90000-0xfed93fff]
pnp 00:0a: >[mem 0xff000000-0xff000fff]
pnp 00:0a: >[mem 0xff010000-0xffffffff]
pnp 00:0a: >[mem 0xfee00000-0xfeefffff]
pnp 00:0a: >[mem 0xafa00000-0xafa00fff]
system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: >[mem 0xff000000-0xff000fff] has been reserved
system 00:0a: >[mem 0xff010000-0xffffffff] could not be reserved
system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: >[mem 0xafa00000-0xafa00fff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[mem 0x20000000-0x201fffff]
pnp 00:0b: >[mem 0x40000000-0x401fffff]
system 00:0b: >[mem 0x20000000-0x201fffff] has been reserved
system 00:0b: >[mem 0x40000000-0x401fffff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Freeing initrd memory: 14712k freed
pci 0000:02:00.0: >no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.1: >BAR 15: assigned [mem 0xafb00000-0xafbfffff pref]
pci 0000:00:1c.0: >PCI bridge to [bus 01-01]
pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: > bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:02:00.0: >BAR 6: assigned [mem 0xafb00000-0xafb0ffff pref]
pci 0000:00:1c.1: >PCI bridge to [bus 02-02]
pci 0000:00:1c.1: > bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:00:1c.1: > bridge window [mem 0xafb00000-0xafbfffff pref]
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:01: >resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: >resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
pci_bus 0000:02: >resource 1 [mem 0xc0500000-0xc05fffff]
pci_bus 0000:02: >resource 2 [mem 0xafb00000-0xafbfffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: >Boot video device
PCI: CLS 64 bytes, default 64
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1398683592.588:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 1650
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ACPI: Battery Slot [BAT1] (battery present)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: >flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 40
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617200 irq 40
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: >setting latency timer to 64
ehci_hcd 0000:00:1a.0: >EHCI Host Controller
ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: >debug port 2
ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xc0619000
ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.0
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >2 ports detected
ehci_hcd 0000:00:1d.0: >setting latency timer to 64
ehci_hcd 0000:00:1d.0: >EHCI Host Controller
ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: >debug port 2
ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xc0618000
ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: >setting latency timer to 64
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: >irq 21, io mem 0xc0600000
xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: xHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb3: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >4 ports detected
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: xHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb4: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >4 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: >RTC can wake from S4
rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Magic number: 10:425:227
acpi PNP0200:00: >hash matches
rtc_cmos 00:06: >setting system clock to 2014-04-28 11:13:13 UTC (1398683593)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ACPI: Battery Slot [BAT1] (battery present)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVD+/-RW GU70N, A102, max UDMA/100
ata3.00: configured for UDMA/100
isapnp: No Plug & Play device found
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD10JPVT-75A1YT0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA WDC WD10JPVT-75A 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: >[sda] 4096-byte physical blocks
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 2:0:0:0: >CD-ROM HL-DT-ST DVD+-RW GU70N A102 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: >Attached scsi CD-ROM sr0
sr 2:0:0:0: >Attached scsi generic sg1 type 5
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5960k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4280k
udevd[114]: starting version 175
usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >6 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: >irq 42 for MSI/MSI-X
r8169 0000:01:00.0: >eth0: RTL8105e at 0xf8416000, e0:db:55:da:e5:bb, XID 00c00000 IRQ 42
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >6 ports detected
usb 1-1.1: >new full-speed USB device number 3 using ehci_hcd
Refined TSC clocksource calibration: 1396.826 MHz.
Switching to clocksource tsc
usb 1-1.1: >New USB device found, idVendor=0cf3, idProduct=e004
usb 1-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: >Product: Bluetooth USB Host Controller
usb 1-1.1: >Manufacturer: Atheros Communications
usb 1-1.1: >SerialNumber: Alaska Day 2006
usb 1-1.3: >new high-speed USB device number 4 using ehci_hcd
usb 1-1.3: >New USB device found, idVendor=0bda, idProduct=0129
usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: >Product: USB2.0-CRW
usb 1-1.3: >Manufacturer: Generic
usb 1-1.3: >SerialNumber: 20100201396000000
EXT4-fs (sda7): INFO: recovery required on readonly filesystem
EXT4-fs (sda7): write access will be enabled during recovery
usb 1-1.4: >new high-speed USB device number 5 using ehci_hcd
usb 1-1.4: >New USB device found, idVendor=0c45, idProduct=64ad
usb 1-1.4: >New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.4: >Product: Laptop_Integrated_Webcam_HD
usb 1-1.4: >Manufacturer: CN0Y3PX8724872BMAJWHA00
EXT4-fs (sda7): orphan cleanup on readonly fs
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 292000
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 698634
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 698632
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 698630
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 552782
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 552779
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 550986
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 553595
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 553599
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 553597
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 552780
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 554542
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 547105
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 551566
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 553767
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 553760
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 553699
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 553010
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 529820
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 551367
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 532456
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 550713
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 554581
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 262333
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 262332
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 262331
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 262330
EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 262329
EXT4-fs (sda7): 28 orphan inodes deleted
EXT4-fs (sda7): recovery complete
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Adding 1464316k swap on /dev/sda6. Priority:-1 extents:1 across:1464316k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[339]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
mei 0000:00:16.0: >setting latency timer to 64
mei 0000:00:16.0: >irq 43 for MSI/MSI-X
mei 0000:00:16.0: >wd: failed to find the client
i915 0000:00:02.0: >setting latency timer to 64
pci 0000:00:00.0: >Intel Sandybridge Chipset
pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: >detected 65536K stolen memory
i915 0000:00:02.0: >irq 44 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64ad)
rts5139: module is from the staging directory, the quality is unknown, you have been warned.
ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: >Atheros AR9485 Rev:1 mem=0xf8f00000, irq=17
scsi6 : SCSI emulation for RTS5139 USB card reader
scsi 6:0:0:0: >Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
usbcore: registered new interface driver rts5139
sd 6:0:0:0: >Attached scsi generic sg2 type 0
sd 6:0:0:0: >[sdb] Attached SCSI removable disk
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input4
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
dcdbas dcdbas: >Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Dell WMI hotkeys as /devices/virtual/input/input5
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
usbcore: registered new interface driver ath3k
microcode: Microcode Update Driver: v2.00 , Peter Oruba
usb 1-1.1: >USB disconnect, device number 3
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 1-1.1: >new full-speed USB device number 6 using ehci_hcd
usb 1-1.1: >New USB device found, idVendor=0cf3, idProduct=e004
usb 1-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: >Product: Bluetooth USB Host Controller
usb 1-1.1: >Manufacturer: Atheros Communications
usb 1-1.1: >SerialNumber: Alaska Day 2006
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
ACPI Warning: _BQC returned an invalid level (20120320/video-480)
acpi device:32: >registered as cooling_device4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
psmouse serio1: >synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
init: failsafe main process (768) killed by TERM signal
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ppdev: user-space parallel port driver
hda_codec: ALC282: SKU not ready 0x598301f0
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
type=1400 audit(1398680005.887:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=840 comm="apparmor_parser"
type=1400 audit(1398680005.887:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=840 comm="apparmor_parser"
type=1400 audit(1398680005.907:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=883 comm="apparmor_parser"
type=1400 audit(1398680005.911:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=883 comm="apparmor_parser"
type=1400 audit(1398680005.911:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=885 comm="apparmor_parser"
type=1400 audit(1398680005.911:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=885 comm="apparmor_parser"
type=1400 audit(1398680005.911:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=884 comm="apparmor_parser"
type=1400 audit(1398680005.915:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=884 comm="apparmor_parser"
type=1400 audit(1398680005.919:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=886 comm="apparmor_parser"
type=1400 audit(1398680005.919:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=889 comm="apparmor_parser"
r8169 0000:01:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
dell_wmi: Unknown key e00e pressed
dell_wmi: Unknown key e00e pressed
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: send auth to 00:26:b6:0c:a4:9b (try 2/3)
wlan0: send auth to 00:26:b6:0c:a4:9b (try 3/3)
wlan0: authentication with 00:26:b6:0c:a4:9b timed out
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=3)
wlan0: associated
CPU1: Package power limit notification (total events = 1)
CPU3: Package power limit notification (total events = 1)
CPU2: Package power limit notification (total events = 1)
CPU0: Package power limit notification (total events = 1)
CPU3: Package power limit normal
CPU2: Package power limit normal
CPU0: Package power limit normal
CPU1: Package power limit normal
CPU3: Package power limit notification (total events = 76)
CPU2: Package power limit notification (total events = 75)
CPU1: Package power limit notification (total events = 77)
CPU0: Package power limit notification (total events = 76)
CPU1: Package power limit normal
CPU2: Package power limit normal
CPU3: Package power limit normal
CPU0: Package power limit normal
dell_wmi: Unknown key e00e pressed
CPU1: Package power limit notification (total events = 90)
CPU3: Package power limit notification (total events = 89)
CPU2: Package power limit notification (total events = 88)
CPU0: Package power limit notification (total events = 89)
CPU2: Package power limit normal
CPU3: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal
CPU2: Package power limit notification (total events = 153)
CPU1: Package power limit notification (total events = 159)
CPU0: Package power limit notification (total events = 158)
CPU3: Package power limit notification (total events = 158)
CPU2: Package power limit normal
CPU3: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal
CPU3: Package power limit notification (total events = 163)
CPU1: Package power limit notification (total events = 164)
CPU0: Package power limit notification (total events = 163)
CPU2: Package power limit notification (total events = 158)
CPU3: Package power limit normal
CPU2: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: send auth to 00:26:b6:0c:a4:9b (try 2/3)
wlan0: send auth to 00:26:b6:0c:a4:9b (try 3/3)
wlan0: authentication with 00:26:b6:0c:a4:9b timed out
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: send auth to 00:26:b6:0c:a4:9b (try 2/3)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: send auth to 00:26:b6:0c:a4:9b (try 3/3)
wlan0: authentication with 00:26:b6:0c:a4:9b timed out
CPU0: Package power limit notification (total events = 177)
CPU2: Package power limit notification (total events = 172)
CPU3: Package power limit notification (total events = 177)
CPU1: Package power limit notification (total events = 178)
CPU2: Package power limit normal
CPU3: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: send auth to 00:26:b6:0c:a4:9b (try 2/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:26:b6:0c:a4:9b
wlan0: send auth to 00:26:b6:0c:a4:9b (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:b6:0c:a4:9b (try 1/3)
wlan0: RX AssocResp from 00:26:b6:0c:a4:9b (capab=0x1 status=0 aid=2)
wlan0: associated
CPU2: Package power limit notification (total events = 179)
CPU3: Package power limit notification (total events = 184)
CPU1: Package power limit notification (total events = 185)
CPU0: Package power limit notification (total events = 184)
CPU1: Package power limit normal
CPU0: Package power limit normal
CPU2: Package power limit normal
CPU3: Package power limit normal
CPU3: Package power limit notification (total events = 203)
CPU1: Package power limit notification (total events = 204)
CPU0: Package power limit notification (total events = 203)
CPU2: Package power limit notification (total events = 198)
CPU3: Package power limit normal
CPU1: Package power limit normal
CPU2: Package power limit normal
CPU0: Package power limit normal
CPU1: Package power limit notification (total events = 293)
CPU2: Package power limit notification (total events = 287)
CPU3: Package power limit notification (total events = 292)
CPU0: Package power limit notification (total events = 292)
CPU1: Package power limit normal
CPU2: Package power limit normal
CPU3: Package power limit normal
CPU0: Package power limit normal
CPU1: Package power limit notification (total events = 493)
CPU3: Package power limit notification (total events = 492)
CPU2: Package power limit notification (total events = 487)
CPU0: Package power limit notification (total events = 492)
CPU3: Package power limit normal
CPU2: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal