dmesg - videoteste
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.10-7-desktop (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP PREEMPT Mon Feb 3 09:41:24 UTC 2014 (750023e)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000006faf7fff] usable
BIOS-e820: [mem 0x000000006faf8000-0x000000006fb3ffff] ACPI NVS
BIOS-e820: [mem 0x000000006fb40000-0x000000006fb49fff] ACPI data
BIOS-e820: [mem 0x000000006fb4a000-0x000000006fb4cfff] ACPI NVS
BIOS-e820: [mem 0x000000006fb4d000-0x000000006fb4dfff] reserved
BIOS-e820: [mem 0x000000006fb4e000-0x000000006fb4efff] ACPI NVS
BIOS-e820: [mem 0x000000006fb4f000-0x000000006fb53fff] reserved
BIOS-e820: [mem 0x000000006fb54000-0x000000006fb54fff] usable
BIOS-e820: [mem 0x000000006fb55000-0x000000006fb64fff] reserved
BIOS-e820: [mem 0x000000006fb65000-0x000000006fb6cfff] ACPI NVS
BIOS-e820: [mem 0x000000006fb6d000-0x000000006fb91fff] reserved
BIOS-e820: [mem 0x000000006fb92000-0x000000006fbd4fff] ACPI NVS
BIOS-e820: [mem 0x000000006fbd5000-0x000000006fd47fff] usable
BIOS-e820: [mem 0x000000006fd48000-0x000000006fef6fff] reserved
BIOS-e820: [mem 0x000000006fef7000-0x000000006fefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: SAMSUNG ELECTRONICS CO., LTD. RV415/RV515/RV415/RV415, BIOS 00RO.M003.20120112.LEO 01/12/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x6ff00 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 06FF00000 mask FFFF00000 uncachable
2 base 070000000 mask FF0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fcf40-0x000fcf4f] mapped at [c00fcf40]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x011fffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x36e00000-0x36ffffff]
[mem 0x36e00000-0x36ffffff] page 2M
init_memory_mapping: [mem 0x34000000-0x36dfffff]
[mem 0x34000000-0x36dfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37000000-0x371fdfff]
[mem 0x37000000-0x371fdfff] page 4k
BRK [0x00cca000, 0x00ccafff] PGTABLE
BRK [0x00ccb000, 0x00ccbfff] PGTABLE
BRK [0x00ccc000, 0x00cccfff] PGTABLE
BRK [0x00ccd000, 0x00ccdfff] PGTABLE
BRK [0x00cce000, 0x00ccefff] PGTABLE
RAMDISK: [mem 0x34f22000-0x36788fff]
ACPI: RSDP 000f0450 00024 (v02 SECCSD)
ACPI: XSDT 6fb40070 0005C (v01 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: FACP 6fb47bd0 000F4 (v04 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
ACPI: DSDT 6fb40158 07A77 (v02 SECCSD LH43STAR 00000000 INTL 20051117)
ACPI: FACS 6fb6cf80 00040
ACPI: APIC 6fb47cc8 00062 (v03 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: MCFG 6fb47d30 0003C (v01 SECCSD LH43STAR 01072009 MSFT 00010013)
ACPI: SLIC 6fb47d70 00176 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
ACPI: HPET 6fb47ee8 00038 (v01 SECCSD LH43STAR 01072009 AMI 00000004)
ACPI: SSDT 6fb47f20 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 6fb48300 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000006fefffff]
Initmem setup node 0 [mem 0x00000000-0x6fefffff]
NODE_DATA [mem 0x371f6000-0x371f7fff]
909MB HIGHMEM available.
881MB LOWMEM available.
max_low_pfn = 371fe, highstart_pfn = 371fe
Low memory ends at vaddr f71fe000
High memory starts at vaddr f71fe000
mapped low ram: 0 - 371fe000
low ram: 0 - 371fe000
BRK [0x00ccf000, 0x00ccffff] PGTABLE
Node: 0, start_pfn: 1, end_pfn: 9e
Setting physnode_map array to node 0 for pfns:
1
Node: 0, start_pfn: 100, end_pfn: 6faf8
Setting physnode_map array to node 0 for pfns:
100 4100 8100 c100 10100 14100 18100 1c100 20100 24100 28100 2c100 30100 34100 38100 3c100 40100 44100 48100 4c100 50100 54100 58100 5c100 60100 64100 68100 6c100
Node: 0, start_pfn: 6fb54, end_pfn: 6fb55
Setting physnode_map array to node 0 for pfns:
6fb54
Node: 0, start_pfn: 6fbd5, end_pfn: 6fd48
Setting physnode_map array to node 0 for pfns:
6fbd5
Node: 0, start_pfn: 6fef7, end_pfn: 6ff00
Setting physnode_map array to node 0 for pfns:
6fef7
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x371fdfff]
HighMem [mem 0x371fe000-0x6fefffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x6faf7fff]
node 0: [mem 0x6fb54000-0x6fb54fff]
node 0: [mem 0x6fbd5000-0x6fd47fff]
node 0: [mem 0x6fef7000-0x6fefffff]
On node 0 totalpages: 457746
free_area_init_node: node 0, pgdat f71f6000, node_mem_map f3f62024
DMA zone: 36 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3997 pages, LIFO batch:0
Normal zone: 1949 pages used for memmap
Normal zone: 221694 pages, LIFO batch:31
HighMem zone: 2046 pages used for memmap
HighMem zone: 232055 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x6ff00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f71d1000 s33408 r0 d23936 u57344
pcpu-alloc: s33408 r0 d23936 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 455761
Policy zone: HighMem
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 3667960 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000371fe:0006ff00)
Memory: 1774176K/1830984K available (5263K kernel code, 394K rwdata, 3708K rodata, 592K init, 1020K bss, 56808K reserved, 928220K highmem)
virtual kernel memory layout:
fixmap : 0xff5b4000 - 0xfffff000 (10540 kB)
pkmap : 0xff200000 - 0xff400000 (2048 kB)
vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
.init : 0xc0b27000 - 0xc0bbb000 ( 592 kB)
.data : 0xc0724033 - 0xc0b26a40 (4106 kB)
.text : 0xc0200000 - 0xc0724033 (5264 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
NR_IRQS:8448 nr_irqs:512 16
CPU 0 irqstacks, hard=f6806000 soft=f6808000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1297.283 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.56 BogoMIPS (lpj=1297283)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 24K (c0bbb000 - c0bc1000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD E-300 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f68e2000 soft=f68e4000
smpboot: Booting Node 0, Processors #1 OK
Initializing CPU#1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (5189.13 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x6faf8000-0x6fb3ffff] (294912 bytes)
PM: Registering ACPI NVS region [mem 0x6fb4a000-0x6fb4cfff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0x6fb4e000-0x6fb4efff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x6fb65000-0x6fb6cfff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0x6fb92000-0x6fbd4fff] (274432 bytes)
RTC time: 14:04:07, date: 04/23/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb4d000-0xfeb4d3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb4b000-0xfeb4b0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb4a000-0xfeb4afff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb49000-0xfeb490ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb48000-0xfeb48fff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xfea00000-0xfea0ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 05]
pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 06]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x6faf8000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6fb55000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6fd48000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6ff00000-0x6fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
system 00:0a: [mem 0x70000000-0x7fffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:15.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:15.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:15.1: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:15.2: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 400000
pci 0000:00:15.3: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:15.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:15.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:15.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:15.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:15.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:15.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:15.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:15.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:15.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:04.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
pci 0000:00:04.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:15.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:15.1: BAR 14: assigned [mem 0x80600000-0x807fffff]
pci 0000:00:15.1: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
pci 0000:00:15.2: BAR 14: assigned [mem 0x80a00000-0x80dfffff]
pci 0000:00:15.3: BAR 14: assigned [mem 0x80e00000-0x80ffffff]
pci 0000:00:15.3: BAR 15: assigned [mem 0x81000000-0x811fffff 64bit pref]
pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:15.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:15.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:15.3: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0x80000000-0x801fffff]
pci 0000:00:04.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:15.0: bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:15.1: bridge window [mem 0x80600000-0x807fffff]
pci 0000:00:15.1: bridge window [mem 0x80800000-0x809fffff 64bit pref]
pci 0000:00:15.2: PCI bridge to [bus 05]
pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
pci 0000:00:15.2: bridge window [mem 0x80a00000-0x80dfffff]
pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 06]
pci 0000:00:15.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:15.3: bridge window [mem 0x80e00000-0x80ffffff]
pci 0000:00:15.3: bridge window [mem 0x81000000-0x811fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: resource 10 [mem 0x80000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0x80600000-0x807fffff]
pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0x80a00000-0x80dfffff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0x80e00000-0x80ffffff]
pci_bus 0000:06: resource 2 [mem 0x81000000-0x811fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 24988K (f4f22000 - f6789000)
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x05000101
microcode: CPU1: patch_level=0x05000101
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1398261848.060:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1701
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x16, linelength=1280, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xc0000000, mapped to 0xf7a80000, using 640k, total 640k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d380 irq 19
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4b000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.10-7-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb49000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.10-7-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
Key type dns_resolver registered
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Checking hibernation image partition /dev/disk/by-id/ata-SAMSUNG_HM321HI_S26VJ9BBA45550-part5
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633J, SC01, max UDMA/100
ata1.00: ATA-8: SAMSUNG HM321HI, 2AJ10002, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM321HI 2AJ1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633J SC01 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-4: new high-speed USB device number 2 using ehci-pci
usb 2-4: New USB device found, idVendor=2232, idProduct=1005
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: WebCam SCB-0385N
usb 2-4: Manufacturer: Image Processor
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x15, 0x0c.
tsc: Refined TSC clocksource calibration: 1297.237 MHz
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input1
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 10:712:81
rtc_cmos 00:03: setting system clock to 2014-04-23 14:04:09 UTC (1398261849)
Freeing unused kernel memory: 592K (c0b27000 - c0bbb000)
Write protecting the kernel text: 5268k
Write protecting the kernel read-only data: 3708k
NX-protecting the kernel data: 4972k
emc: device handler registered
hp_sw: device handler registered
alua: device handler registered
rdac: device handler registered
systemd-udevd[103]: starting version 208
ACPI: acpi_idle registered with cpuidle
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 a0000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x144D:0xC648).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 435780 kiB
[TTM] Zone highmem: Available graphics memory: 899890 kiB
[TTM] Initializing pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading PALM Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xff25dc00
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xff25dc0c
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf7f32118
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 40 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
ohci-pci: OHCI PCI platform driver
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xC0378000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Switched to clocksource tsc
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.34.0 20080528 for 0000:00:01.0 on minor 0
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.11.10-7-desktop ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.11.10-7-desktop ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb48000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.11.10-7-desktop ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
microcode: CPU0: new patch_level=0x05000119
microcode: CPU1: new patch_level=0x05000119
usb 3-2: new low-speed USB device number 2 using ohci-pci
usb 3-2: New USB device found, idVendor=17ef, idProduct=6018
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Lenovo Low Profile USB Keyboard
usb 3-2: Manufacturer: Lenovo
input: Lenovo Lenovo Low Profile USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input2
hid-generic 0003:17EF:6018.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Lenovo Low Profile USB Keyboard] on usb-0000:00:12.0-2/input0
input: Lenovo Lenovo Low Profile USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input3
hid-generic 0003:17EF:6018.0002: input,hidraw1: USB HID v1.11 Device [Lenovo Lenovo Low Profile USB Keyboard] on usb-0000:00:12.0-2/input1
usb 3-5: new low-speed USB device number 3 using ohci-pci
usb 3-5: New USB device found, idVendor=15d9, idProduct=0a4d
usb 3-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-5: Product: USB OPTICAL MOUSE
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.0/input/input4
hid-generic 0003:15D9:0A4D.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-5/input0
xor: measuring software checksum speed
pIII_sse : 2576.000 MB/sec
prefetch64-sse: 2760.000 MB/sec
xor: using function: prefetch64-sse (2760.000 MB/sec)
raid6: mmxx1 488 MB/s
raid6: mmxx2 820 MB/s
raid6: sse1x1 476 MB/s
raid6: sse1x2 812 MB/s
raid6: sse2x1 839 MB/s
raid6: sse2x2 1183 MB/s
raid6: using algorithm sse2x2 (1183 MB/s)
raid6: using ssse3x1 recovery algorithm
bio: create slab at 1
Btrfs loaded
PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr
systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time.
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
systemd[1]: Starting Collect Read-Ahead Data...
systemd[1]: Starting Replay Read-Ahead Data...
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting System Time Synchronized.
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting LSB: Set default boot entry if called...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create dynamic rule for /dev/root link...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-readahead[235]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
systemd-journald[241]: Vacuuming done, freed 0 bytes
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr
systemd-udevd[277]: starting version 208
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ACPI: Power Button [PWRF]
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (off-line)
acpi-cpufreq: overriding BIOS provided _PSD data
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:32: registered as cooling_device2
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xf7a74b00). heartbeat=60 sec (nowayout=0)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 41 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8105e at 0xf7a60000, e8:03:9a:42:c1:ac, XID 00900000 IRQ 41
input: PC Speaker as /devices/platform/pcspkr/input/input10
cfg80211: Calling CRDA to update world regulatory domain
samsung_laptop: detected SABI interface: SwSmi@
samsung_laptop: Backlight controlled by ACPI video driver
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device WebCam SCB-0385N (2232:1005)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: WebCam SCB-0385N as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
systemd-udevd[304]: renamed network interface eth0 to enp5s0
ALSA hda_intel.c:3317 0000:00:01.1: Using LPIB position fix
snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ALSA hda_intel.c:1787 0000:00:01.1: Enable sync_write for stable communication
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input12
ALSA hda_intel.c:3317 0000:00:14.2: Using LPIB position fix
ALSA hda_intel.c:1787 0000:00:14.2: Enable sync_write for stable communication
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8240000, irq=16
ALSA patch_realtek.c:418 SKU: Nid=0x1d sku_cfg=0x40059a05
ALSA patch_realtek.c:420 SKU: port_connectivity=0x1
ALSA patch_realtek.c:421 SKU: enable_pcbeep=0x0
ALSA patch_realtek.c:422 SKU: check_sum=0x00000005
ALSA patch_realtek.c:423 SKU: customization=0x0000009a
ALSA patch_realtek.c:424 SKU: external_amp=0x0
ALSA patch_realtek.c:425 SKU: platform_type=0x1
ALSA patch_realtek.c:426 SKU: swap=0x0
ALSA patch_realtek.c:427 SKU: override=0x1
ALSA hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
ALSA hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:401 hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:402 mono: mono_out=0x0
ALSA hda_auto_parser.c:406 inputs:
ALSA hda_auto_parser.c:410 Internal Mic=0x19
ALSA hda_auto_parser.c:410 Mic=0x18
ALSA patch_realtek.c:490 realtek: No valid SSID, checking pincfg 0x40059a05 for NID 0x1d
ALSA patch_realtek.c:506 realtek: Enabling init ASM_ID=0x9a05 CODEC_ID=10ec0269
systemd-udevd[297]: renamed network interface wlan0 to wlp3s0
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
Adding 2113532k swap on /dev/sda5. Priority:-1 extents:1 across:2113532k FS
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
systemd-journald[241]: Received request to flush runtime journal from PID 1
type=1400 audit(1398272665.721:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=432 comm="apparmor_parser"
type=1400 audit(1398272665.752:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=440 comm="apparmor_parser"
type=1400 audit(1398272665.769:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=444 comm="apparmor_parser"
type=1400 audit(1398272665.787:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=448 comm="apparmor_parser"
type=1400 audit(1398272665.815:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=453 comm="apparmor_parser"
type=1400 audit(1398272665.816:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=453 comm="apparmor_parser"
type=1400 audit(1398272665.817:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=453 comm="apparmor_parser"
type=1400 audit(1398272665.817:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=453 comm="apparmor_parser"
type=1400 audit(1398272665.835:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=457 comm="apparmor_parser"
type=1400 audit(1398272665.853:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/auth" pid=461 comm="apparmor_parser"
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
NET: Registered protocol family 17
r8169 0000:05:00.0 enp5s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
wlp3s0: authenticate with 18:33:9d:a1:f9:30
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 1/3)
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 2/3)
wlp3s0: send auth to 18:33:9d:a1:f9:30 (try 3/3)
wlp3s0: authenticated
wlp3s0: associate with 18:33:9d:a1:f9:30 (try 1/3)
wlp3s0: RX AssocResp from 18:33:9d:a1:f9:30 (capab=0x421 status=0 aid=133)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
cfg80211: Calling CRDA for country: BR
ath: regdomain 0x804c updated by CountryIE
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
cfg80211: Regulatory domain changed to country: BR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=252 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=212
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=420 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=380
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=420 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=380
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=420 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=380
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=390 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=350
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
fuse init (API version 7.22)
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
wlp3s0: deauthenticated from 18:33:9d:a1:f9:30 (Reason: 1)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlp3s0: authenticate with 18:33:9d:a0:46:a0
wlp3s0: direct probe to 18:33:9d:a0:46:a0 (try 1/3)
wlp3s0: direct probe to 18:33:9d:a0:46:a0 (try 2/3)
wlp3s0: direct probe to 18:33:9d:a0:46:a0 (try 3/3)
wlp3s0: authentication with 18:33:9d:a0:46:a0 timed out
wlp3s0: authenticate with 18:33:9d:3f:9f:70
wlp3s0: direct probe to 18:33:9d:3f:9f:70 (try 1/3)
wlp3s0: direct probe to 18:33:9d:3f:9f:70 (try 2/3)
wlp3s0: direct probe to 18:33:9d:3f:9f:70 (try 3/3)
wlp3s0: authentication with 18:33:9d:3f:9f:70 timed out
wlp3s0: authenticate with 18:33:9d:5e:5d:90
wlp3s0: direct probe to 18:33:9d:5e:5d:90 (try 1/3)
wlp3s0: direct probe to 18:33:9d:5e:5d:90 (try 2/3)
wlp3s0: direct probe to 18:33:9d:5e:5d:90 (try 3/3)
wlp3s0: authentication with 18:33:9d:5e:5d:90 timed out
wlp3s0: authenticate with 18:33:9d:ff:4b:e0
wlp3s0: send auth to 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: RX AssocResp from 18:33:9d:ff:4b:e0 (capab=0x421 status=0 aid=182)
wlp3s0: associated
cfg80211: Calling CRDA for country: BR
ath: regdomain 0x804c updated by CountryIE
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
cfg80211: Regulatory domain changed to country: BR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
usb 3-5: USB disconnect, device number 3
usb 3-5: new low-speed USB device number 4 using ohci-pci
usb 3-5: New USB device found, idVendor=15d9, idProduct=0a4d
usb 3-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-5: Product: USB OPTICAL MOUSE
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-5/3-5:1.0/input/input15
hid-generic 0003:15D9:0A4D.0004: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-5/input0
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
wlp3s0: deauthenticated from 18:33:9d:ff:4b:e0 (Reason: 1)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlp3s0: authenticate with 18:33:9d:ff:4b:e0
wlp3s0: send auth to 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: RX AssocResp from 18:33:9d:ff:4b:e0 (capab=0x421 status=0 aid=182)
wlp3s0: associated
cfg80211: Calling CRDA for country: BR
ath: regdomain 0x804c updated by CountryIE
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
cfg80211: Regulatory domain changed to country: BR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlp3s0: authenticate with 18:33:9d:a1:f9:30
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 2/3)
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 3/3)
wlp3s0: authentication with 18:33:9d:a1:f9:30 timed out
wlp3s0: authenticate with 18:33:9d:ff:4b:e0
wlp3s0: send auth to 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: RX AssocResp from 18:33:9d:ff:4b:e0 (capab=0x421 status=0 aid=182)
wlp3s0: associated
cfg80211: Calling CRDA for country: BR
ath: regdomain 0x804c updated by CountryIE
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
cfg80211: Regulatory domain changed to country: BR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlp3s0: authenticate with 18:33:9d:a1:f9:30
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 2/3)
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 3/3)
wlp3s0: authentication with 18:33:9d:a1:f9:30 timed out
wlp3s0: authenticate with 18:33:9d:ff:4b:e0
wlp3s0: send auth to 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: RX AssocResp from 18:33:9d:ff:4b:e0 (capab=0x421 status=0 aid=182)
wlp3s0: associated
cfg80211: Calling CRDA for country: BR
ath: regdomain 0x804c updated by CountryIE
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
cfg80211: Regulatory domain changed to country: BR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlp3s0: authenticate with 18:33:9d:a1:f9:30
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 2/3)
wlp3s0: direct probe to 18:33:9d:a1:f9:30 (try 3/3)
wlp3s0: authentication with 18:33:9d:a1:f9:30 timed out
wlp3s0: authenticate with 18:33:9d:ff:4b:e0
wlp3s0: send auth to 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: RX AssocResp from 18:33:9d:ff:4b:e0 (capab=0x421 status=0 aid=182)
wlp3s0: associated
cfg80211: Calling CRDA for country: BR
ath: regdomain 0x804c updated by CountryIE
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
cfg80211: Regulatory domain changed to country: BR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
SFW2-INext-DROP-DEFLT IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e2ca:94ff:fec5:59a0 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
wlp3s0: authenticate with 18:33:9d:a0:46:a0
wlp3s0: direct probe to 18:33:9d:a0:46:a0 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlp3s0: send auth to 18:33:9d:a0:46:a0 (try 2/3)
wlp3s0: authenticated
wlp3s0: authenticate with 18:33:9d:a1:f9:30
wlp3s0: send auth to 18:33:9d:a1:f9:30 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 18:33:9d:a1:f9:30 (try 1/3)
wlp3s0: RX AssocResp from 18:33:9d:a1:f9:30 (capab=0x421 status=0 aid=145)
wlp3s0: associated
cfg80211: Calling CRDA for country: BR
ath: regdomain 0x804c updated by CountryIE
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
cfg80211: Regulatory domain changed to country: BR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlp3s0: authenticate with 18:33:9d:ff:4b:e0
wlp3s0: direct probe to 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: direct probe to 18:33:9d:ff:4b:e0 (try 2/3)
wlp3s0: direct probe to 18:33:9d:ff:4b:e0 (try 3/3)
wlp3s0: authentication with 18:33:9d:ff:4b:e0 timed out
wlp3s0: authenticate with 18:33:9d:a0:46:a0
wlp3s0: send auth to 18:33:9d:a0:46:a0 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 18:33:9d:a0:46:a0 (try 1/3)
wlp3s0: RX AssocResp from 18:33:9d:a0:46:a0 (capab=0x421 status=0 aid=15)
wlp3s0: associated
cfg80211: Calling CRDA for country: BR
ath: regdomain 0x804c updated by CountryIE
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
cfg80211: Regulatory domain changed to country: BR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlp3s0: authenticate with 18:33:9d:3f:9f:70
wlp3s0: direct probe to 18:33:9d:3f:9f:70 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlp3s0: direct probe to 18:33:9d:3f:9f:70 (try 2/3)
wlp3s0: direct probe to 18:33:9d:3f:9f:70 (try 3/3)
wlp3s0: authentication with 18:33:9d:3f:9f:70 timed out
wlp3s0: authenticate with 18:33:9d:ff:4b:e0
wlp3s0: direct probe to 18:33:9d:ff:4b:e0 (try 1/3)
wlp3s0: direct probe to 18:33:9d:ff:4b:e0 (try 2/3)
wlp3s0: direct probe to 18:33:9d:ff:4b:e0 (try 3/3)
wlp3s0: authentication with 18:33:9d:ff:4b:e0 timed out
wlp3s0: authenticate with 18:33:9d:a1:f9:30
wlp3s0: send auth to 18:33:9d:a1:f9:30 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 18:33:9d:a1:f9:30 (try 1/3)
wlp3s0: RX AssocResp from 18:33:9d:a1:f9:30 (capab=0x421 status=0 aid=42)
wlp3s0: associated
cfg80211: Calling CRDA for country: BR
ath: regdomain 0x804c updated by CountryIE
ath: EEPROM regdomain: 0x804c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3b
ath: Country alpha2 being used: BR
ath: Regpair used: 0x3b
cfg80211: Regulatory domain changed to country: BR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)