dmesg - CompileBench
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.1 (freddy@cskim2.yonsei.ac.kr) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Thu Apr 17 02:51:18 KST 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cc14bfff] usable
BIOS-e820: [mem 0x00000000cc14c000-0x00000000cc431fff] reserved
BIOS-e820: [mem 0x00000000cc432000-0x00000000cc53ffff] ACPI data
BIOS-e820: [mem 0x00000000cc540000-0x00000000cc76dfff] ACPI NVS
BIOS-e820: [mem 0x00000000cc76e000-0x00000000cd718fff] reserved
BIOS-e820: [mem 0x00000000cd719000-0x00000000cd719fff] usable
BIOS-e820: [mem 0x00000000cd71a000-0x00000000cd79ffff] ACPI NVS
BIOS-e820: [mem 0x00000000cd7a0000-0x00000000cdbe6fff] usable
BIOS-e820: [mem 0x00000000cdbe7000-0x00000000cdff3fff] reserved
BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P9X79 PRO, BIOS 4608 12/24/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFFE0000000 write-back
2 base 000820000000 mask 3FFFF0000000 write-back
3 base 0000CF000000 mask 3FFFFF000000 uncachable
4 base 0000D0000000 mask 3FFFF0000000 uncachable
5 base 0000E0000000 mask 3FFFE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 512MB, type WB
reg 2, base: 33280MB, range: 256MB, type WB
reg 3, base: 3312MB, range: 16MB, type UC
reg 4, base: 3328MB, range: 256MB, type UC
reg 5, base: 3584MB, range: 512MB, type UC
total RAM covered: 32752M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3312MB, range: 16MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 16GB, type WB
reg 7, base: 32GB, range: 512MB, type WB
reg 8, base: 33280MB, range: 256MB, type WB
e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd900-0x000fd90f] mapped at [ffff8800000fd900]
Base memory trampoline at [ffff880000097000] 97000 size 28672
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01f54000, 0x01f54fff] PGTABLE
BRK [0x01f55000, 0x01f55fff] PGTABLE
BRK [0x01f56000, 0x01f56fff] PGTABLE
init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
[mem 0x82fe00000-0x82fffffff] page 2M
BRK [0x01f57000, 0x01f57fff] PGTABLE
init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
[mem 0x82c000000-0x82fdfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x82bffffff]
[mem 0x800000000-0x82bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcc14bfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcbffffff] page 2M
[mem 0xcc000000-0xcc14bfff] page 4k
init_memory_mapping: [mem 0xcd719000-0xcd719fff]
[mem 0xcd719000-0xcd719fff] page 4k
BRK [0x01f58000, 0x01f58fff] PGTABLE
init_memory_mapping: [mem 0xcd7a0000-0xcdbe6fff]
[mem 0xcd7a0000-0xcd7fffff] page 4k
[mem 0xcd800000-0xcd9fffff] page 2M
[mem 0xcda00000-0xcdbe6fff] page 4k
BRK [0x01f59000, 0x01f59fff] PGTABLE
init_memory_mapping: [mem 0xcdff4000-0xcdffffff]
[mem 0xcdff4000-0xcdffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x37a5c000-0x37feffff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000cc468070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000cc4721b0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000cc468168 00A046 (v02 ALASKA A M I 00000016 INTL 20051117)
ACPI: FACS 00000000cc765080 000040
ACPI: APIC 00000000cc4722c0 000170 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000cc472430 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000cc472478 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 00000000cc4724b8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: BGRT 00000000cc53f670 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000cc472548 0CD128 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082fffffff]
Initmem setup node 0 [mem 0x00000000-0x82fffffff]
NODE_DATA [mem 0x82ffd6000-0x82fffcfff]
crashkernel: memory value expected
[ffffea0000000000-ffffea001cbfffff] PMD -> [ffff88080f600000-ffff88082b7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x82fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xcc14bfff]
node 0: [mem 0xcd719000-0xcd719fff]
node 0: [mem 0xcd7a0000-0xcdbe6fff]
node 0: [mem 0xcdff4000-0xcdffffff]
node 0: [mem 0x100000000-0x82fffffff]
On node 0 totalpages: 8373565
DMA zone: 56 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11388 pages used for memmap
DMA32 zone: 832928 pages, LIFO batch:31
Normal zone: 103040 pages used for memmap
Normal zone: 7536640 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x19] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 20 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcc14c000-0xcc431fff]
PM: Registered nosave memory: [mem 0xcc432000-0xcc53ffff]
PM: Registered nosave memory: [mem 0xcc540000-0xcc76dfff]
PM: Registered nosave memory: [mem 0xcc76e000-0xcd718fff]
PM: Registered nosave memory: [mem 0xcd71a000-0xcd79ffff]
PM: Registered nosave memory: [mem 0xcdbe7000-0xcdff3fff]
PM: Registered nosave memory: [mem 0xce000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xce000000-0xdfffffff] available for PCI devices
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:20 nr_cpu_ids:20 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88082f000000 s80256 r8192 d22144 u262144
pcpu-alloc: s80256 r8192 d22144 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8259059
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 32943296K/33494260K available (5701K kernel code, 1190K rwdata, 2720K rodata, 1824K init, 2408K bss, 550964K reserved)
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=20.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
NR_IRQS:524544 nr_irqs:1248 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2201.481 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4402.96 BogoMIPS (lpj=2201481)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 27 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81cf3000 - ffffffff81cf8000)
ftrace: allocating 23170 entries in 91 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz (fam: 06, model: 3e, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
x86: Booted up 1 node, 20 CPUs
smpboot: Total of 20 processors activated (88059.24 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcc540000-0xcc76dfff] (2285568 bytes)
PM: Registering ACPI NVS region [mem 0xcd71a000-0xcd79ffff] (548864 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfa52a000-0xfa52afff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfa529000-0xfa52900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfa500000-0xfa51ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfa528000-0xfa528fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfa527000-0xfa5273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfa520000-0xfa523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfa526000-0xfa5263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfa525000-0xfa5257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfa524000-0xfa5240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:01:00.0: [10de:1245] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfa000000-0xfa07ffff pref]
pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfa080000-0xfa083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfa0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:06:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:06:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:06:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:06:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:06:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:06:00.0: reg 0x24: [mem 0xfa400000-0xfa4001ff]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfa400000-0xfa4fffff]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfa300000-0xfa307fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xfa300000-0xfa3fffff]
pci 0000:08:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfa200000-0xfa207fff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfa200000-0xfa2fffff]
pci 0000:09:00.0: [1b4b:9130] type 00 class 0x010601
pci 0000:09:00.0: reg 0x10: [io 0xc040-0xc047]
pci 0000:09:00.0: reg 0x14: [io 0xc030-0xc033]
pci 0000:09:00.0: reg 0x18: [io 0xc020-0xc027]
pci 0000:09:00.0: reg 0x1c: [io 0xc010-0xc013]
pci 0000:09:00.0: reg 0x20: [io 0xc000-0xc00f]
pci 0000:09:00.0: reg 0x24: [mem 0xfa110000-0xfa1107ff]
pci 0000:09:00.0: reg 0x30: [mem 0xfa100000-0xfa10ffff pref]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xfa100000-0xfa1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:0ee8] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:0ee9] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcc14c000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd71a000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcdbe7000-0xcfffffff]
e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [io 0x0400-0x0453] could not be reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfa0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfa400000-0xfa4fffff]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xfa300000-0xfa3fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfa200000-0xfa2fffff]
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xfa100000-0xfa1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfa0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfa400000-0xfa4fffff]
pci_bus 0000:07: resource 1 [mem 0xfa300000-0xfa3fffff]
pci_bus 0000:08: resource 1 [mem 0xfa200000-0xfa2fffff]
pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:09: resource 1 [mem 0xfa100000-0xfa1fffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0a: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0a: resource 10 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5712K (ffff880037a5c000 - ffff880037ff0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc814c000-0xcc14c000] (64MB) mapped at [ffff8800c814c000-ffff8800cc14bfff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
futex hash table entries: 8192 (order: 7, 524288 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1397793840.758:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3E
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfa527000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfa526000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.14.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
gre: GRE over IPv4 demultiplexor driver
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: b87109fb9b432a3b699b335573021c3767998e7b'
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
rtc_cmos 00:03: setting system clock to 2014-04-18 04:04:01 UTC (1397793841)
Freeing unused kernel memory: 1824K (ffffffff81b2b000 - ffffffff81cf3000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 432K (ffff880001594000 - ffff880001600000)
Freeing unused kernel memory: 1376K (ffff8800018a8000 - ffff880001a00000)
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
udev: starting version 147
udevd (164): /proc/164/oom_adj is deprecated, please use /proc/164/oom_score_adj instead.
dracut: Starting plymouth daemon
wmi: module verification failed: signature and/or required key missing - tainting kernel
wmi: Mapper loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 64 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfa525000 port 0xfa525100 irq 64
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:06:00.0: irq 65 for MSI/MSI-X
ahci 0000:06:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfa400000 port 0xfa400100 irq 65
ata8: SATA max UDMA/133 abar m512@0xfa400000 port 0xfa400180 irq 65
ahci 0000:09:00.0: irq 66 for MSI/MSI-X
ahci 0000:09:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq pio
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
scsi14 : ahci
scsi15 : ahci
ata9: SATA max UDMA/133 abar m2048@0xfa110000 port 0xfa110100 irq 66
ata10: SATA max UDMA/133 abar m2048@0xfa110000 port 0xfa110180 irq 66
ata11: SATA max UDMA/133 abar m2048@0xfa110000 port 0xfa110200 irq 66
ata12: SATA max UDMA/133 abar m2048@0xfa110000 port 0xfa110280 irq 66
ata13: SATA max UDMA/133 abar m2048@0xfa110000 port 0xfa110300 irq 66
ata14: SATA max UDMA/133 abar m2048@0xfa110000 port 0xfa110380 irq 66
ata15: SATA max UDMA/133 abar m2048@0xfa110000 port 0xfa110400 irq 66
ata16: SATA max UDMA/133 abar m2048@0xfa110000 port 0xfa110480 irq 66
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: ST2000NM0053-1C1175, 0001, max UDMA/133
ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST2000NM0053-1C1 0001 PQ: 0 ANSI: 5
ata12: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata16.00: configured for UDMA/66
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata8: SATA link down (SStatus 0 SControl 300)
scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
xhci_hcd: module has bad taint, not creating trace events
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
tsc: Refined TSC clocksource calibration: 2201.371 MHz
usb 2-1.8: new full-speed USB device number 3 using ehci-pci
xhci_hcd 0000:07:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 74 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.14.1 xhci_hcd
usb usb3: SerialNumber: 0000:07:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.14.1 xhci_hcd
usb usb4: SerialNumber: 0000:07:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
usb 2-1.8: New USB device found, idVendor=0cf3, idProduct=3000
usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
xhci_hcd 0000:08:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 82 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.14.1 xhci_hcd
usb usb5: SerialNumber: 0000:08:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.14.1 xhci_hcd
usb usb6: SerialNumber: 0000:08:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 5-1: new high-speed USB device number 2 using xhci_hcd
jbd2: module has bad taint, not creating trace events
ext4: module has bad taint, not creating trace events
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/sda1
usb 5-1: New USB device found, idVendor=2109, idProduct=3431
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB2.0 Hub
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
random: nonblocking pool is initialized
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit: type=1404 audit(1397793843.250:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
Switched to clocksource tsc
usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 6-1: New USB device found, idVendor=2109, idProduct=0810
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: 4-Port USB 3.0 Hub
usb 6-1: Manufacturer: VIA Labs, Inc.
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 4 ports detected
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.67 Fri Apr 4 13:48:39 PDT 2014
snd_hda_intel 0000:00:1b.0: irq 83 for MSI/MSI-X
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 84 for MSI/MSI-X
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:60:00:6c:e7:6b
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.SBRG.GPBX) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.SBRG.GPBX) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
EDAC sbridge: Seeking for: dev 1c.0 PCI ID 8086:0e60
EDAC sbridge: Seeking for: dev 1d.2 PCI ID 8086:0e6a
EDAC sbridge: Seeking for: dev 1d.3 PCI ID 8086:0e6b
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:0eb8
EDAC sbridge: Seeking for: dev 11.4 PCI ID 8086:0ebc
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 15:0:0:0: Attached scsi generic sg1 type 3
input: PC Speaker as /devices/platform/pcspkr/input/input17
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU2 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU3 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU4 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU5 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU6 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU7 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU8 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU9 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU10 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU11 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU12 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU13 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU14 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU15 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU16 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU17 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU18 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU19 sig=0x306e4, pf=0x1, revision=0x416
microcode: Microcode Update Driver: v2.00 , Peter Oruba
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Adding 8392700k swap on /dev/sda2. Priority:-1 extents:1 across:8392700k
NET: Registered protocol family 10
e1000e 0000:00:19.0: irq 84 for MSI/MSI-X
e1000e 0000:00:19.0: irq 84 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
8021q: 802.1Q VLAN Support v1.8
nvidia 0000:01:00.0: irq 85 for MSI/MSI-X
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
perf samples too long (2572 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5021 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf samples too long (10032 > 10000), lowering kernel.perf_event_max_sample_rate to 13000