dmesg - test-mrbayes

Return To test-mrbayes System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-19-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #33~precise1-Ubuntu SMP Wed Mar 12 21:16:27 UTC 2014 (Ubuntu 3.11.0-19.33~precise1-generic 3.11.10.5)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ca9befff] usable
BIOS-e820: [mem 0x00000000ca9bf000-0x00000000cac9afff] reserved
BIOS-e820: [mem 0x00000000cac9b000-0x00000000cacaafff] ACPI data
BIOS-e820: [mem 0x00000000cacab000-0x00000000cba0bfff] ACPI NVS
BIOS-e820: [mem 0x00000000cba0c000-0x00000000cca4ffff] reserved
BIOS-e820: [mem 0x00000000cca50000-0x00000000cca50fff] usable
BIOS-e820: [mem 0x00000000cca51000-0x00000000ccc56fff] ACPI NVS
BIOS-e820: [mem 0x00000000ccc57000-0x00000000cd082fff] usable
BIOS-e820: [mem 0x00000000cd083000-0x00000000cd7f3fff] reserved
BIOS-e820: [mem 0x00000000cd7f4000-0x00000000cd7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000022effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./M5A99X EVO R2.0, BIOS 1503 01/16/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CDFFF write-protect
  CE000-EBFFF uncachable
  EC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CD800000 mask FFFFFF800000 uncachable
  4 base 0000CE000000 mask FFFFFE000000 uncachable
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000022f000000 aka 8944M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3288MB, range: 8MB, type UC
reg 4, base: 3296MB, range: 32MB, type UC
total RAM covered: 3288M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3288MB, range: 8MB, type UC
reg 4, base: 3296MB, range: 32MB, type UC
e820: update [mem 0xcd800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcd800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fda000, 0x01fdafff] PGTABLE
BRK [0x01fdb000, 0x01fdbfff] PGTABLE
BRK [0x01fdc000, 0x01fdcfff] PGTABLE
init_memory_mapping: [mem 0x22ee00000-0x22effffff]
 [mem 0x22ee00000-0x22effffff] page 2M
BRK [0x01fdd000, 0x01fddfff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22edfffff]
 [mem 0x22c000000-0x22edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
 [mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xca9befff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xca7fffff] page 2M
 [mem 0xca800000-0xca9befff] page 4k
init_memory_mapping: [mem 0xcca50000-0xcca50fff]
 [mem 0xcca50000-0xcca50fff] page 4k
BRK [0x01fde000, 0x01fdefff] PGTABLE
init_memory_mapping: [mem 0xccc57000-0xcd082fff]
 [mem 0xccc57000-0xccdfffff] page 4k
 [mem 0xcce00000-0xccffffff] page 2M
 [mem 0xcd000000-0xcd082fff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0xcd7f4000-0xcd7fffff]
 [mem 0xcd7f4000-0xcd7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x1ffffffff]
 [mem 0x100001000-0x1001fffff] page 4k
 [mem 0x100200000-0x13fffffff] page 2M
 [mem 0x140000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35ea0000-0x36f47fff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000caca2070 0005C (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 00000000caca91e8 0010C (v05 ALASKA    A M I 01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
ACPI: DSDT 00000000caca2168 07079 (v02 ALASKA    A M I 00000000 INTL 20051117)
ACPI: FACS 00000000cba06f80 00040
ACPI: APIC 00000000caca92f8 0008E (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FPDT 00000000caca9388 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 00000000caca93d0 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000caca9410 00038 (v01 ALASKA    A M I 01072009 AMI  00000005)
ACPI: BGRT 00000000cacaa5f8 00038 (v00 ALASKA    A M I 01072009 AMI  00010013)
ACPI: SSDT 00000000caca94a0 01158 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022effffff]
Initmem setup node 0 [mem 0x00000000-0x22effffff]
  NODE_DATA [mem 0x22eff5000-0x22eff9fff]
 [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x22effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0xca9befff]
  node   0: [mem 0xcca50000-0xcca50fff]
  node   0: [mem 0xccc57000-0xcd082fff]
  node   0: [mem 0xcd7f4000-0xcd7fffff]
  node   0: [mem 0x100001000-0x22effffff]
On node 0 totalpages: 2071956
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 12920 pages used for memmap
  DMA32 zone: 826872 pages, LIFO batch:31
  Normal zone: 19392 pages used for memmap
  Normal zone: 1241087 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xca9bf000-0xcac9afff]
PM: Registered nosave memory: [mem 0xcac9b000-0xcacaafff]
PM: Registered nosave memory: [mem 0xcacab000-0xcba0bfff]
PM: Registered nosave memory: [mem 0xcba0c000-0xcca4ffff]
PM: Registered nosave memory: [mem 0xcca51000-0xccc56fff]
PM: Registered nosave memory: [mem 0xcd083000-0xcd7f3fff]
PM: Registered nosave memory: [mem 0xcd800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xcd800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88022ec00000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2039559
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c0000000
PM: Registered nosave memory: [mem 0xc0000000-0xc3ffffff]
Memory: 7990776K/8287824K available (7514K kernel code, 1080K rwdata, 4076K rodata, 1392K init, 1428K bss, 297048K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1272 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3511.936 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7023.87 BogoMIPS (lpj=14047744)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cd800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 31308 entries in 123 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 OK
Brought up 6 CPUs
smpboot: Total of 6 processors activated (42143.23 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcacab000-0xcba0bfff] (14028800 bytes)
PM: Registering ACPI NVS region [mem 0xcca51000-0xccc56fff] (2121728 bytes)
regulator-dummy: no parameters
RTC time: 16:44:06, date: 04/14/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:1201] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xdc104000-0xdc104fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xdc100000-0xdc103fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io  0xc050-0xc057]
pci 0000:04:00.0: reg 0x14: [io  0xc040-0xc043]
pci 0000:04:00.0: reg 0x18: [io  0xc030-0xc037]
pci 0000:04:00.0: reg 0x1c: [io  0xc020-0xc023]
pci 0000:04:00.0: reg 0x20: [io  0xc000-0xc01f]
pci 0000:04:00.0: reg 0x24: [mem 0xfe200000-0xfe2001ff]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:06.0:   bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0:   bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xca9bf000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcca51000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd083000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x040b] has been reserved
system 00:01: [io  0x04d6] has been reserved
system 00:01: [io  0x0c00-0x0c01] has been reserved
system 00:01: [io  0x0c14] has been reserved
system 00:01: [io  0x0c50-0x0c51] has been reserved
system 00:01: [io  0x0c52] has been reserved
system 00:01: [io  0x0c6c] has been reserved
system 00:01: [io  0x0c6f] has been reserved
system 00:01: [io  0x0cd0-0x0cd1] has been reserved
system 00:01: [io  0x0cd2-0x0cd3] has been reserved
system 00:01: [io  0x0cd4-0x0cd5] has been reserved
system 00:01: [io  0x0cd6-0x0cd7] has been reserved
system 00:01: [io  0x0cd8-0x0cdf] has been reserved
system 00:01: [io  0x0800-0x089f] could not be reserved
system 00:01: [io  0x0b20-0x0b3f] has been reserved
system 00:01: [io  0x0900-0x090f] has been reserved
system 00:01: [io  0x0910-0x091f] has been reserved
system 00:01: [io  0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:06.0:   bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0:   bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:06: resource 4 [io  0x0000-0x03af]
pci_bus 0000:06: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:06: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:06: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17056K (ffff880035ea0000 - ffff880036f48000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c0000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1397493845.756:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15769
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
megasas: 06.600.18.00-rc1 Wed. May. 15 17:00:00 PDT 2013
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfe407000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfe404000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-19-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.11.0-19-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 20, io mem 0xfe408000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.11.0-19-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.11.0-19-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 22, io mem 0xfe405000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.11.0-19-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 78 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.0-19-generic xhci_hcd
usb usb8: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.11.0-19-generic xhci_hcd
usb usb9: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:05:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 85 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.11.0-19-generic xhci_hcd
usb usb10: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.11.0-19-generic xhci_hcd
usb usb11: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 6f1e8a3e2743f36ea8484dd50336b801418b8e3d'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 10:420:742
rtc_cmos 00:04: setting system clock to 2014-04-14 16:44:07 UTC (1397493847)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1392K (ffffffff81d10000 - ffffffff81e6c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 668K (ffff880001759000 - ffff880001800000)
Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
udevd[132]: starting version 175
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x30 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b380 irq 19
ahci 0000:04:00.0: irq 86 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 87 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc90000c7c000, 60:a4:4c:60:ba:e2, XID 08000800 IRQ 87
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe200000 port 0xfe200100 irq 86
ata8: SATA max UDMA/133 abar m512@0xfe200000 port 0xfe200180 irq 86
ata7: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3511.854 MHz
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-8: ST3500320AS, SD15, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: configured for UDMA/100
 sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH20NS15  IL00 PQ: 0 ANSI: 5
usb 3-1: new high-speed USB device number 2 using ehci-pci
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
usb 3-1: New USB device found, idVendor=1307, idProduct=0330
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Mass Storage Device
usb 3-1: Manufacturer: Generic   
usb 3-1: SerialNumber: 00000000000006
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi8 : usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
ata8: SATA link down (SStatus 0 SControl 300)
kjournald starting.  Commit interval 5 seconds
EXT3-fs (loop0): mounted filesystem with ordered data mode
usb 5-2: new full-speed USB device number 2 using ohci-pci
usb 5-2: New USB device found, idVendor=046d, idProduct=c223
usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-2: Product: G11 Keyboard
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
Switched to clocksource tsc
usb 4-4: new low-speed USB device number 2 using ohci-pci
usb 4-4: New USB device found, idVendor=056a, idProduct=0011
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: ET-0405A-UV2.0-1
usb 4-4: Manufacturer: WACOM
scsi 8:0:0:0: Direct-Access     Generic  USB  CF Reader   0.00 PQ: 0 ANSI: 2
scsi 8:0:0:1: Direct-Access     Generic  USB  SD Reader   0.00 PQ: 0 ANSI: 2
scsi 8:0:0:2: Direct-Access     Generic  USB  MS Reader   0.00 PQ: 0 ANSI: 2
scsi 8:0:0:3: Direct-Access     Generic  USB  SM Reader   0.00 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:1: Attached scsi generic sg3 type 0
sd 8:0:0:2: Attached scsi generic sg4 type 0
sd 8:0:0:3: Attached scsi generic sg5 type 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
usb 4-5: new full-speed USB device number 3 using ohci-pci
sd 8:0:0:1: [sdc] Attached SCSI removable disk
sd 8:0:0:2: [sdd] Attached SCSI removable disk
sd 8:0:0:3: [sde] Attached SCSI removable disk
usb 4-5: New USB device found, idVendor=046d, idProduct=c24e
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-5: Product: G500s Laser Gaming Mouse
usb 4-5: Manufacturer: Logitech
usb 4-5: SerialNumber: C6A58A2A600008
init: ureadahead main process (340) terminated with status 5
usb 10-2: new high-speed USB device number 2 using xhci_hcd
usb 10-2: New USB device found, idVendor=04b8, idProduct=0838
usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 10-2: Product: USB2.0 MFP(Hi-Speed)
usb 10-2: Manufacturer: EPSON
usb 10-2: SerialNumber: 4C3433303446D39827
usb-storage 10-2:1.2: USB Mass Storage device detected
scsi9 : usb-storage 10-2:1.2
usb 5-2.1: new low-speed USB device number 3 using ohci-pci
usb 5-2.1: New USB device found, idVendor=046d, idProduct=c221
usb 5-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-2.1: Product: Gaming Keyboard
usb 5-2.4: new full-speed USB device number 4 using ohci-pci
usb 5-2.4: New USB device found, idVendor=046d, idProduct=c225
usb 5-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-2.4: Product: G11 Keyboard
scsi 9:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg6 type 0
sd 9:0:0:0: [sdf] Attached SCSI removable disk
Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k FS
EXT3-fs (loop0): using internal journal
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[520]: starting version 175
type=1400 audit(1397486655.756:2): apparmor="STATUS" operation="profile_load" parent=701 profile="unconfined" name="/sbin/dhclient" pid=709 comm="apparmor_parser"
type=1400 audit(1397486655.756:3): apparmor="STATUS" operation="profile_load" parent=701 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=709 comm="apparmor_parser"
type=1400 audit(1397486655.756:4): apparmor="STATUS" operation="profile_load" parent=701 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=709 comm="apparmor_parser"
type=1400 audit(1397486655.756:5): apparmor="STATUS" operation="profile_replace" parent=723 profile="unconfined" name="/sbin/dhclient" pid=724 comm="apparmor_parser"
type=1400 audit(1397486655.756:6): apparmor="STATUS" operation="profile_replace" parent=723 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser"
type=1400 audit(1397486655.756:7): apparmor="STATUS" operation="profile_replace" parent=723 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=724 comm="apparmor_parser"
type=1400 audit(1397486655.756:8): apparmor="STATUS" operation="profile_replace" parent=701 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=709 comm="apparmor_parser"
type=1400 audit(1397486655.756:9): apparmor="STATUS" operation="profile_replace" parent=701 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=709 comm="apparmor_parser"
type=1400 audit(1397486655.756:10): apparmor="STATUS" operation="profile_replace" parent=723 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser"
type=1400 audit(1397486655.756:11): apparmor="STATUS" operation="profile_replace" parent=723 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=724 comm="apparmor_parser"
wmi: Mapper loaded
input: Wacom Graphire2 4x5 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input2
usbcore: registered new interface driver wacom
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
hidraw: raw HID events driver (C) Jiri Kosina
[drm] Initialized drm 1.1.0 20060810
MCE: In-kernel MCE decoding enabled.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
lp: driver loaded but no devices found
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
EDAC MC: Ver: 3.0.0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
asus_wmi: ASUS WMI generic driver loaded
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
ppdev: user-space parallel port driver
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
asus_wmi: Disabling ACPI video driver
sp5100_tco: initialized (0xffffc90000c7eb00). heartbeat=60 sec (nowayout=0)
input: Logitech G500s Laser Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input4
hid-generic 0003:046D:C24E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500s Laser Gaming Mouse] on usb-0000:00:12.0-5/input0
input: Logitech G500s Laser Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input5
hid-generic 0003:046D:C24E.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500s Laser Gaming Mouse] on usb-0000:00:12.0-5/input1
input: Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2.1/5-2.1:1.0/input/input6
hid-generic 0003:046D:C221.0003: input,hidraw2: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:13.0-2.1/input0
input: Gaming Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2.1/5-2.1:1.1/input/input7
hid-generic 0003:046D:C221.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:13.0-2.1/input1
input: G11 Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2.4/5-2.4:1.0/input/input8
hid-generic 0003:046D:C225.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G11 Keyboard] on usb-0000:00:13.0-2.4/input0
init: failsafe main process (869) killed by TERM signal
usblp 10-2:1.1: usblp3: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0838
usbcore: registered new interface driver usblp
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4007e629
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000e6
SKU: external_amp=0x5
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x11/0x1e
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4007e629 for NID 0x1d
realtek: Enabling init ASM_ID=0xe629 CODEC_ID=10ec0892
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
audit_printk_skb: 54 callbacks suppressed
type=1400 audit(1397486660.884:30): apparmor="STATUS" operation="profile_load" parent=1039 profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=1047 comm="apparmor_parser"
type=1400 audit(1397486660.884:31): apparmor="STATUS" operation="profile_load" parent=1039 profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=1047 comm="apparmor_parser"
type=1400 audit(1397486660.884:32): apparmor="STATUS" operation="profile_replace" parent=1039 profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=1047 comm="apparmor_parser"
type=1400 audit(1397486661.504:33): apparmor="STATUS" operation="profile_load" parent=1039 profile="unconfined" name="/usr/bin/evince" pid=1045 comm="apparmor_parser"
type=1400 audit(1397486661.504:34): apparmor="STATUS" operation="profile_load" parent=1039 profile="unconfined" name="launchpad_integration" pid=1045 comm="apparmor_parser"
type=1400 audit(1397486661.504:35): apparmor="STATUS" operation="profile_load" parent=1039 profile="unconfined" name="sanitized_helper" pid=1045 comm="apparmor_parser"
type=1400 audit(1397486661.504:36): apparmor="STATUS" operation="profile_load" parent=1039 profile="unconfined" name="/usr/bin/evince-previewer" pid=1045 comm="apparmor_parser"
type=1400 audit(1397486661.504:37): apparmor="STATUS" operation="profile_load" parent=1039 profile="unconfined" name="launchpad_integration" pid=1045 comm="apparmor_parser"
type=1400 audit(1397486661.504:38): apparmor="STATUS" operation="profile_load" parent=1039 profile="unconfined" name="sanitized_helper" pid=1045 comm="apparmor_parser"
type=1400 audit(1397486661.504:39): apparmor="STATUS" operation="profile_load" parent=1039 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1045 comm="apparmor_parser"
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
init: udev-fallback-graphics main process (1158) terminated with status 1
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
nvidia 0000:01:00.0: irq 88 for MSI/MSI-X
audit_printk_skb: 87 callbacks suppressed
type=1400 audit(1397486714.462:69): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=2188 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Return To test-mrbayes System Information