dmesg - 01
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.7-1 (2014-03-25)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfddffff] usable
BIOS-e820: [mem 0x00000000cfde0000-0x00000000cfde2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfde3000-0x00000000cfdeffff] ACPI data
BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdfffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-MA74GM-S2H/GA-MA74GM-S2H, BIOS F3a 02/23/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 base 00CFE00000 mask FFFFE00000 uncachable
4 base 0100000000 mask FFE0000000 write-back
5 base 0120000000 mask FFF0000000 write-back
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfde0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f56d0-0x000f56df] mapped at [ffff8800000f56d0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01a9b000, 0x01a9bfff] PGTABLE
BRK [0x01a9c000, 0x01a9cfff] PGTABLE
BRK [0x01a9d000, 0x01a9dfff] PGTABLE
init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[mem 0x12fe00000-0x12fffffff] page 2M
BRK [0x01a9e000, 0x01a9efff] PGTABLE
init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[mem 0x12c000000-0x12fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x12bffffff]
[mem 0x100000000-0x12bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfddffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfddffff] page 4k
RAMDISK: [mem 0x363fe000-0x371f6fff]
ACPI: RSDP 00000000000f7090 000014 (v00 GBT )
ACPI: RSDT 00000000cfde3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfde3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfde30c0 0041E7 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfde0000 000040
ACPI: SSDT 00000000cfde7380 00028A (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000cfde7640 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfde7680 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfde72c0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcfddffff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1047934
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11585 pages used for memmap
DMA32 zone: 847328 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 196608 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfde0000-0xcfde2fff]
PM: Registered nosave memory: [mem 0xcfde3000-0xcfdeffff]
PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdfffff]
PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s85824 r8192 d20672 u524288
pcpu-alloc: s85824 r8192 d20672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1033584
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ fe02000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 3974748K/4191736K available (4809K kernel code, 693K rwdata, 1620K rodata, 988K init, 952K bss, 216988K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
NR_IRQS:33024 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2511.760 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5023.52 BogoMIPS (lpj=10047040)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) Dual Core Processor 4850e (fam: 0f, model: 6b, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10046.69 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcfde0000-0xcfde2fff] (12288 bytes)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff]
TOM2: 0000000130000000 aka 4864M
bus: [bus 00-03] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xefffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [1002:7911] type 00 class 0x060000
pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:7916] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:00.0: [10de:0615] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xde00-0xdeff]
pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfde0000-0xcfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
system 00:01: [io 0x4100-0x411f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x0238-0x023f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x4000-0x40fe] could not be reserved
system 00:01: [io 0x4210-0x4217] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000d2800-0x000d3fff] has been reserved
system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0xcfde0000-0xcfdfffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xcfddffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:03: resource 9 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14308K (ffff8800363fe000 - ffff8800371f7000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
microcode: AMD CPU family 0xf not supported
audit: initializing netlink socket (disabled)
type=2000 audit(1397118883.012:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7919
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2014-04-10 08:34:43 UTC (1397118883)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000)
Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000)
systemd-udevd[56]: starting version 204
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000610000, 00:1d:7d:d5:9c:d8, XID 1c2000c0 IRQ 42
r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
ohci-pci: OHCI PCI platform driver
libata version 3.00 loaded.
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
Floppy drive(s): fd0 is 1.44M
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
FDC 0 is a post-1991 82077
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13-1-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13-1-amd64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13-1-amd64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
ata7.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
ata7.00: configured for UDMA/33
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13-1-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13-1-amd64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
usb 1-2: new high-speed USB device number 3 using ehci-pci
usb 1-2: New USB device found, idVendor=0424, idProduct=2504
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: HPA detected: current 3907027055, native 3907029168
ata1.00: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
ata1.00: 3907027055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
scsi 6:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 6:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-3: new high-speed USB device number 3 using ehci-pci
usb 2-3: New USB device found, idVendor=0bda, idProduct=0161
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: USB2.0-CRW
usb 2-3: Manufacturer: Generic
usb 2-3: SerialNumber: 20070818000000000
usb-storage 2-3:1.1: USB Mass Storage device detected
scsi8 : usb-storage 2-3:1.1
usbcore: registered new interface driver usb-storage
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
usb 4-2: new full-speed USB device number 2 using ohci-pci
PM: Starting manual resume from disk
PM: Hibernation image partition 8:6 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
usb 4-2: New USB device found, idVendor=045e, idProduct=001b
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: SideWinder Force Feedback 2 Joystick
usb 4-2: Manufacturer: Microsoft
random: nonblocking pool is initialized
usb 5-2: new low-speed USB device number 2 using ohci-pci
scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:1: Attached scsi generic sg3 type 0
sd 8:0:0:2: Attached scsi generic sg4 type 0
sd 8:0:0:3: Attached scsi generic sg5 type 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
sd 8:0:0:1: [sdc] Attached SCSI removable disk
sd 8:0:0:2: [sdd] Attached SCSI removable disk
sd 8:0:0:3: [sde] Attached SCSI removable disk
systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
usb 5-2: New USB device found, idVendor=068e, idProduct=0501
usb 5-2: New USB device strings: Mfr=1, Product=4, SerialNumber=0
usb 5-2: Product: CH Pro Pedals USB Rudder Pedals
usb 5-2: Manufacturer: CH Products
usb 3-1: new full-speed USB device number 2 using ohci-pci
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
usb 3-1: New USB device found, idVendor=131d, idProduct=0157
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2.1: new full-speed USB device number 5 using ehci-pci
usb 1-2.1: New USB device found, idVendor=046d, idProduct=0a44
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: Logitech USB Headset
usb 1-2.1: Manufacturer: Logitech
usb 1-2.3: new full-speed USB device number 6 using ehci-pci
usb 1-2.3: New USB device found, idVendor=046d, idProduct=c51a
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Receiver
usb 1-2.3: Manufacturer: Logitech
usb 1-2.4: new full-speed USB device number 7 using ehci-pci
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB Receiver
usb 1-2.4: Manufacturer: Logitech
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Syslog.
systemd[1]: Reached target Syslog.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create static device nodes in /dev...
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
fuse init (API version 7.22)
loop: module loaded
systemd-udevd[237]: starting version 204
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.49 Wed Feb 12 20:42:50 PST 2014
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3a
sp5100_tco: failed to find MMIO address, giving up.
input: PC Speaker as /devices/platform/pcspkr/input/input5
kvm: Nested Virtualization enabled
powernow-k8: fid 0x11 (2500 MHz), vid 0xe
powernow-k8: fid 0x10 (2400 MHz), vid 0xf
powernow-k8: fid 0xe (2200 MHz), vid 0x11
powernow-k8: fid 0xc (2000 MHz), vid 0x13
powernow-k8: fid 0xa (1800 MHz), vid 0x15
powernow-k8: fid 0x2 (1000 MHz), vid 0x16
powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e (2 cpu cores) (version 2.20.00)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
Adding 8380412k swap on /dev/sda6. Priority:-1 extents:1 across:8380412k
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver mceusb
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: Microsoft SideWinder Force Feedback 2 Joystick as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input12
logitech-djreceiver 0003:046D:C52B.0008: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.4/input2
hid-generic 0003:045E:001B.0001: device reports 0 simultaneous effects
hid-generic 0003:045E:001B.0001: pid_block_load failed 60 times
hid-generic 0003:045E:001B.0001: upload request failed
hid-generic 0003:045E:001B.0001: input,hidraw0: USB HID v1.00 Joystick [Microsoft SideWinder Force Feedback 2 Joystick] on usb-0000:00:12.1-2/input0
input: CH Products CH Pro Pedals USB Rudder Pedals as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input13
hid-generic 0003:068E:0501.0002: input,hidraw2: USB HID v1.00 Joystick [CH Products CH Pro Pedals USB Rudder Pedals ] on usb-0000:00:13.0-2/input0
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.3/input/input14
hid-generic 0003:046D:0A44.0003: input,hidraw3: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:12.2-2.1/input3
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3:1.0/input/input15
hid-generic 0003:046D:C51A.0004: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3:1.1/input/input16
hid-generic 0003:046D:C51A.0005: input,hiddev0,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.3/input1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x1a8ce offMax=0x1a8ce
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10_Debian (interface 0x001a0007).
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vboxpci: IOMMU not found (not registered)
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
nvidia 0000:01:00.0: irq 43 for MSI/MSI-X
input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0008/input/input17
logitech-djdevice 0003:046D:C52B.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:12.2-2.4:1
usb 1-2: USB disconnect, device number 3
usb 1-2.1: USB disconnect, device number 5
usb 1-2.3: USB disconnect, device number 6
usb 1-2.4: USB disconnect, device number 7
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2550 at /build/linux-oxWk_8/linux-3.13.7/fs/sysfs/group.c:214 device_del+0x3b/0x1b0()
sysfs group ffffffff8187f3a0 not found for kobject 'hidraw1'
Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables nfsv4 dns_resolver cpufreq_userspace vsock cpufreq_powersave cpufreq_stats cpufreq_conservative pci_stub vboxpci(O) binfmt_misc vboxnetadp(O) vboxnetflt(O) vboxdrv(O) rpcsec_gss_krb5 nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc joydev hid_logitech_dj hid_generic evdev snd_hda_codec_realtek mceusb rc_core snd_usb_audio snd_hda_intel snd_usbmidi_lib snd_seq_midi snd_seq_midi_event snd_rawmidi usbhid hid powernow_k8 kvm_amd kvm snd_hda_codec pcspkr psmouse serio_raw snd_hwdep snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer sp5100_tco snd k8temp soundcore edac_mce_amd edac_core i2c_piix4 button processor thermal_sys nvidia(PO) i2c_core loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 dm_mod usb_storage sg sd_mod sr_mod cdrom crc_t10dif crct10dif_common ata_generic pata_atiixp floppy ahci libahci ohci_pci ohci_hcd ehci_pci ehci_hcd r8169 mii libata scsi_mod usbcore usb_common
CPU: 0 PID: 2550 Comm: upowerd Tainted: P O 3.13-1-amd64 #1 Debian 3.13.7-1
Hardware name: Gigabyte Technology Co., Ltd. GA-MA74GM-S2H/GA-MA74GM-S2H, BIOS F3a 02/23/2009
0000000000000009 ffffffff814a1327 ffff8801296fde00 ffffffff8105ba72
ffff88012a4a6c00 ffff8801296fde50 ffff88012abb00b0 ffff88012933b8e8
ffff88012af52aa0 ffffffff8105bad7 ffffffff8170edb8 0000000000000028
Call Trace:
[] ? dump_stack+0x41/0x51
[] ? warn_slowpath_common+0x72/0x90
[] ? warn_slowpath_fmt+0x47/0x50
[] ? device_del+0x3b/0x1b0
[] ? device_unregister+0x9/0x30
[] ? device_destroy+0x35/0x40
[] ? drop_ref.part.2+0x57/0x70 [hid]
[] ? hidraw_release+0x95/0xb0 [hid]
[] ? __fput+0xc5/0x210
[] ? task_work_run+0x97/0xd0
[] ? do_notify_resume+0x59/0x90
[] ? int_signal+0x12/0x17
---[ end trace 94b2b42c469eefd9 ]---
usb 1-2: new high-speed USB device number 8 using ehci-pci
usb 1-2: New USB device found, idVendor=0424, idProduct=2504
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.1: new full-speed USB device number 9 using ehci-pci
usb 1-2.1: New USB device found, idVendor=046d, idProduct=0a44
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: Logitech USB Headset
usb 1-2.1: Manufacturer: Logitech
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.3/input/input18
hid-generic 0003:046D:0A44.000A: input,hidraw1: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:12.2-2.1/input3
usb 1-2.3: new full-speed USB device number 10 using ehci-pci
usb 1-2.3: New USB device found, idVendor=046d, idProduct=c51a
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Receiver
usb 1-2.3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3:1.0/input/input19
hid-generic 0003:046D:C51A.000B: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3:1.1/input/input20
hid-generic 0003:046D:C51A.000C: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.3/input1
usb 1-2.4: new full-speed USB device number 11 using ehci-pci
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB Receiver
usb 1-2.4: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.000F: hiddev0,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.4/input2
input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.000F/input/input21
logitech-djdevice 0003:046D:C52B.0010: input,hidraw6: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:12.2-2.4:1
usb 1-2: USB disconnect, device number 8
usb 1-2.1: USB disconnect, device number 9
usb 1-2.3: USB disconnect, device number 10
usb 1-2.4: USB disconnect, device number 11
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2550 at /build/linux-oxWk_8/linux-3.13.7/fs/sysfs/group.c:214 device_del+0x3b/0x1b0()
sysfs group ffffffff8187f3a0 not found for kobject 'hidraw5'
Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables nfsv4 dns_resolver cpufreq_userspace vsock cpufreq_powersave cpufreq_stats cpufreq_conservative pci_stub vboxpci(O) binfmt_misc vboxnetadp(O) vboxnetflt(O) vboxdrv(O) rpcsec_gss_krb5 nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc joydev hid_logitech_dj hid_generic evdev snd_hda_codec_realtek mceusb rc_core snd_usb_audio snd_hda_intel snd_usbmidi_lib snd_seq_midi snd_seq_midi_event snd_rawmidi usbhid hid powernow_k8 kvm_amd kvm snd_hda_codec pcspkr psmouse serio_raw snd_hwdep snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer sp5100_tco snd k8temp soundcore edac_mce_amd edac_core i2c_piix4 button processor thermal_sys nvidia(PO) i2c_core loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 dm_mod usb_storage sg sd_mod sr_mod cdrom crc_t10dif crct10dif_common ata_generic pata_atiixp floppy ahci libahci ohci_pci ohci_hcd ehci_pci ehci_hcd r8169 mii libata scsi_mod usbcore usb_common
CPU: 1 PID: 2550 Comm: upowerd Tainted: P W O 3.13-1-amd64 #1 Debian 3.13.7-1
Hardware name: Gigabyte Technology Co., Ltd. GA-MA74GM-S2H/GA-MA74GM-S2H, BIOS F3a 02/23/2009
0000000000000009 ffffffff814a1327 ffff8801296fde00 ffffffff8105ba72
ffff88012997ec00 ffff8801296fde50 ffff880127f50340 ffff88012a59b8e8
ffff88012af52aa0 ffffffff8105bad7 ffffffff8170edb8 0000000000000028
Call Trace:
[] ? dump_stack+0x41/0x51
[] ? warn_slowpath_common+0x72/0x90
[] ? warn_slowpath_fmt+0x47/0x50
[] ? device_del+0x3b/0x1b0
[] ? device_unregister+0x9/0x30
[] ? device_destroy+0x35/0x40
[] ? drop_ref.part.2+0x57/0x70 [hid]
[] ? hidraw_release+0x95/0xb0 [hid]
[] ? __fput+0xc5/0x210
[] ? task_work_run+0x97/0xd0
[] ? do_notify_resume+0x59/0x90
[] ? int_signal+0x12/0x17
---[ end trace 94b2b42c469eefda ]---
usb 1-2: new high-speed USB device number 12 using ehci-pci
usb 1-2: New USB device found, idVendor=0424, idProduct=2504
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.1: new full-speed USB device number 13 using ehci-pci
usb 1-2.1: New USB device found, idVendor=046d, idProduct=0a44
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: Logitech USB Headset
usb 1-2.1: Manufacturer: Logitech
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.3/input/input22
hid-generic 0003:046D:0A44.0011: input,hidraw1: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:12.2-2.1/input3
usb 1-2.3: new full-speed USB device number 14 using ehci-pci
usb 1-2.3: New USB device found, idVendor=046d, idProduct=c51a
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Receiver
usb 1-2.3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3:1.0/input/input23
hid-generic 0003:046D:C51A.0012: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3:1.1/input/input24
hid-generic 0003:046D:C51A.0013: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.3/input1
usb 1-2.4: new full-speed USB device number 15 using ehci-pci
usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB Receiver
usb 1-2.4: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0016: hiddev0,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.4/input2
input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0016/input/input25
logitech-djdevice 0003:046D:C52B.0017: input,hidraw6: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:12.2-2.4:1