dmesg - bar
ATOM BIOS: RV710
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 3063328 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV710_uvd.bin
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading RV710 Microcode
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV710_pfp.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV710_me.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R700_rlc.bin
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/RV710_smc.bin
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800db130c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800db130c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90004f1c598
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 47 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] fb mappable at 0xE045E000
[drm] vram apper at 0xE0000000
[drm] size 16384000
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x100
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
Adding 6041596k swap on /dev/mapper/dCameron-swap_1. Priority:-1 extents:1 across:6041596k
EXT4-fs (dm-1): re-mounted. Opts: (null)
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
loop: module loaded
it87: Found IT8718F chip at 0x290, revision 5
it87: VID is disabled (pins used for GPIO)
it87: Beeping is supported
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
EXT4-fs (dm-3): mounting ext3 file system using the ext4 subsystem
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-6): mounting ext3 file system using the ext4 subsystem
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-8): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.22)
r8169 0000:04:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x45e offMax=0x1ace
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.6_Debian (interface 0x001a0007).
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
vboxpci: IOMMU not found (not registered)
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
postgres (4580): /proc/4580/oom_adj is deprecated, please use /proc/4580/oom_score_adj instead.
RPC: AUTH_GSS upcall timed out.
Please check user daemon is running.
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
type=1006 audit(1396631097.916:2): pid=5368 uid=0 old auid=4294967295 new auid=108 old ses=4294967295 new ses=1 res=1
type=1006 audit(1396631114.248:3): pid=5806 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
perf samples too long (13727 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.738 msecs
perf samples too long (13654 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf samples too long (13576 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
usb 1-4: USB disconnect, device number 2
usb 1-4.1: USB disconnect, device number 5
usb 1-4.1.1: USB disconnect, device number 6
usb 1-4: new high-speed USB device number 7 using ehci-pci
usb 1-4: New USB device found, idVendor=0424, idProduct=2504
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
usb 1-4.1: new high-speed USB device number 8 using ehci-pci
usb 1-4.1: New USB device found, idVendor=0424, idProduct=2503
usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 3 ports detected
usb 1-4.1.1: new high-speed USB device number 9 using ehci-pci
usb 1-4.1.1: New USB device found, idVendor=0424, idProduct=2228
usb 1-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.1.1: Product: Flash Card Reader
usb 1-4.1.1: Manufacturer: Generic
usb 1-4.1.1: SerialNumber: 000022272228
usb-storage 1-4.1.1:1.0: USB Mass Storage device detected
scsi9 : usb-storage 1-4.1.1:1.0
scsi 9:0:0:0: Direct-Access Generic Flash HS-CF 4.49 PQ: 0 ANSI: 0
scsi 9:0:0:1: Direct-Access Generic Flash HS-COMBO 4.49 PQ: 0 ANSI: 0
sd 9:0:0:0: Attached scsi generic sg5 type 0
sd 9:0:0:1: Attached scsi generic sg6 type 0
sd 9:0:0:0: [sde] Attached SCSI removable disk
sd 9:0:0:1: [sdf] Attached SCSI removable disk
usb 1-4: USB disconnect, device number 7
usb 1-4.1: USB disconnect, device number 8
usb 1-4.1.1: USB disconnect, device number 9
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 7:0:0:0: [sdd] Synchronizing SCSI cache
sd 4:0:0:0: [sdc] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 4:0:0:0: [sdc] Stopping disk
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 7:0:0:0: [sdd] Stopping disk
sd 3:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sda] Stopping disk
parport_pc 00:08: disabled
serial 00:07: disabled
serial 00:07: System wakeup disabled by ACPI
[drm:rv730_stop_dpm] *ERROR* Could not force DPM to low
[drm] Disabling audio 0 support
PM: suspend of devices complete after 2073.229 msecs
PM: late suspend of devices complete after 0.341 msecs
pcieport 0000:00:1c.5: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.693 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x3
CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x2
CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28
CPU3 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 141.783 msecs
PM: early resume of devices complete after 0.145 msecs
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
usb usb8: root hub lost power or was reset
pcieport 0000:00:1c.5: System wakeup disabled by ACPI
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
serial 00:07: activated
parport_pc 00:08: activated
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800db130c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800db130c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90004f1c598
[drm] ring test on 0 succeeded in 0 usecs
[drm] ring test on 3 succeeded in 1 usecs
r8169 0000:04:00.0 eth0: link down
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 5 succeeded
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: configured for UDMA/100
[drm:rv770_dpm_set_power_state] *ERROR* rv770_set_sw_state failed
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
floppy driver state
-------------------
now=4299280078 last interrupt=4294892538 diff=4387540 last called handler=reset_interrupt [floppy]
timeout_message=lock fdc
last output bytes:
0 0 0
0 0 0
0 0 0
8 80 4294892537
8 80 4294892537
8 80 4294892537
8 80 4294892537
e 80 4294892537
13 80 4294892537
0 90 4294892537
1a 90 4294892537
0 90 4294892537
12 90 4294892537
0 90 4294892537
14 90 4294892537
18 80 4294892537
8 80 4294892538
8 80 4294892538
8 80 4294892538
8 80 4294892538
last result at 4294892538
last redo_fd_request at 4294892538
status=0
fdc_busy=1
do_floppy=reset_interrupt [floppy]
cont=ffffffffa00e33e0
current_req= (null)
command_status=-1
floppy0: floppy timeout called
r8169 0000:04:00.0 eth0: link up
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] Starting disk
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: configured for UDMA/133
sd 7:0:0:0: [sdd] Starting disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
sd 3:0:0:0: [sdb] Starting disk
ata5: softreset failed (device not ready)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sdc] Starting disk
PM: resume of devices complete after 11530.386 msecs
PM: Finishing wakeup.
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
Restarting tasks ... done.
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
usb 1-4: new high-speed USB device number 10 using ehci-pci
usb 1-4: New USB device found, idVendor=0424, idProduct=2504
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
usb 1-4.1: new high-speed USB device number 11 using ehci-pci
usb 1-4.1: New USB device found, idVendor=0424, idProduct=2503
usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 3 ports detected
usb 1-4.1.1: new high-speed USB device number 12 using ehci-pci
usb 1-4.1.1: New USB device found, idVendor=0424, idProduct=2228
usb 1-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.1.1: Product: Flash Card Reader
usb 1-4.1.1: Manufacturer: Generic
usb 1-4.1.1: SerialNumber: 000022272228
usb-storage 1-4.1.1:1.0: USB Mass Storage device detected
scsi10 : usb-storage 1-4.1.1:1.0
scsi 10:0:0:0: Direct-Access Generic Flash HS-CF 4.49 PQ: 0 ANSI: 0
scsi 10:0:0:1: Direct-Access Generic Flash HS-COMBO 4.49 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:1: Attached scsi generic sg6 type 0
sd 10:0:0:0: [sde] Attached SCSI removable disk
sd 10:0:0:1: [sdf] Attached SCSI removable disk
usb 1-4: USB disconnect, device number 10
usb 1-4.1: USB disconnect, device number 11
usb 1-4.1.1: USB disconnect, device number 12
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.031 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 7:0:0:0: [sdd] Synchronizing SCSI cache
sd 4:0:0:0: [sdc] Synchronizing SCSI cache
sd 7:0:0:0: [sdd] Stopping disk
sd 4:0:0:0: [sdc] Stopping disk
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
parport_pc 00:08: disabled
serial 00:07: disabled
sd 2:0:0:0: [sda] Synchronizing SCSI cache
serial 00:07: System wakeup disabled by ACPI
sd 3:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sda] Stopping disk
[drm] Disabling audio 0 support
PM: suspend of devices complete after 4526.354 msecs
PM: late suspend of devices complete after 0.325 msecs
pcieport 0000:00:1c.5: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.723 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x3
CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x2
CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28
CPU3 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 144.742 msecs
PM: early resume of devices complete after 0.105 msecs
usb usb4: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb5: root hub lost power or was reset
pcieport 0000:00:1c.5: System wakeup disabled by ACPI
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
usb usb8: root hub lost power or was reset
snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
serial 00:07: activated
parport_pc 00:08: activated
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800db130c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800db130c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90004f1c598
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
r8169 0000:04:00.0 eth0: link down
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 5 succeeded
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: configured for UDMA/100
[drm:rv770_dpm_set_power_state] *ERROR* rv770_set_sw_state failed
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
floppy driver state
-------------------
now=4299645576 last interrupt=4294892538 diff=4753038 last called handler=reset_interrupt [floppy]
timeout_message=lock fdc
last output bytes:
0 0 0
0 0 0
0 0 0
8 80 4294892537
8 80 4294892537
8 80 4294892537
8 80 4294892537
e 80 4294892537
13 80 4294892537
0 90 4294892537
1a 90 4294892537
0 90 4294892537
12 90 4294892537
0 90 4294892537
14 90 4294892537
18 80 4294892537
8 80 4294892538
8 80 4294892538
8 80 4294892538
8 80 4294892538
last result at 4294892538
last redo_fd_request at 4299280078
status=0
fdc_busy=1
do_floppy=reset_interrupt [floppy]
cont=ffffffffa00e33e0
current_req= (null)
command_status=-1
floppy0: floppy timeout called
r8169 0000:04:00.0 eth0: link up
r8169 0000:04:00.0 eth0: link down
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] Starting disk
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: configured for UDMA/133
sd 7:0:0:0: [sdd] Starting disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
sd 3:0:0:0: [sdb] Starting disk
r8169 0000:04:00.0 eth0: link up
r8169 0000:04:00.0 eth0: link down
ata5: softreset failed (device not ready)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sdc] Starting disk
PM: resume of devices complete after 11422.884 msecs
PM: Finishing wakeup.
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
Restarting tasks ... done.
usb 1-4: new high-speed USB device number 13 using ehci-pci
usb 1-4: New USB device found, idVendor=0424, idProduct=2504
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
usb 1-4.1: new high-speed USB device number 14 using ehci-pci
usb 1-4.1: New USB device found, idVendor=0424, idProduct=2503
usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 3 ports detected
usb 1-4.1.1: new high-speed USB device number 15 using ehci-pci
r8169 0000:04:00.0 eth0: link up
usb 1-4.1.1: New USB device found, idVendor=0424, idProduct=2228
usb 1-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.1.1: Product: Flash Card Reader
usb 1-4.1.1: Manufacturer: Generic
usb 1-4.1.1: SerialNumber: 000022272228
usb-storage 1-4.1.1:1.0: USB Mass Storage device detected
scsi11 : usb-storage 1-4.1.1:1.0
scsi 11:0:0:0: Direct-Access Generic Flash HS-CF 4.49 PQ: 0 ANSI: 0
scsi 11:0:0:1: Direct-Access Generic Flash HS-COMBO 4.49 PQ: 0 ANSI: 0
sd 11:0:0:0: Attached scsi generic sg5 type 0
sd 11:0:0:1: Attached scsi generic sg6 type 0
r8169 0000:04:00.0 eth0: link down
sd 11:0:0:0: [sde] Attached SCSI removable disk
sd 11:0:0:1: [sdf] Attached SCSI removable disk
r8169 0000:04:00.0 eth0: link up
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link up
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link up
usb 1-4.1.2: new high-speed USB device number 16 using ehci-pci
usb 1-4.1.2: New USB device found, idVendor=058f, idProduct=6387
usb 1-4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.1.2: Product: Rainbow Line
usb 1-4.1.2: Manufacturer: Intenso
usb 1-4.1.2: SerialNumber: AA00000000002141
usb-storage 1-4.1.2:1.0: USB Mass Storage device detected
scsi12 : usb-storage 1-4.1.2:1.0
scsi 12:0:0:0: Direct-Access Intenso Rainbow Line 1100 PQ: 0 ANSI: 0 CCS
sd 12:0:0:0: Attached scsi generic sg7 type 0
sd 12:0:0:0: [sdg] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB)
sd 12:0:0:0: [sdg] Write Protect is off
sd 12:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 12:0:0:0: [sdg] No Caching mode page found
sd 12:0:0:0: [sdg] Assuming drive cache: write through
sd 12:0:0:0: [sdg] No Caching mode page found
sd 12:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
sd 12:0:0:0: [sdg] No Caching mode page found
sd 12:0:0:0: [sdg] Assuming drive cache: write through
sd 12:0:0:0: [sdg] Attached SCSI removable disk
FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
sdg: detected capacity change from 4051697664 to 0
usb 1-4.1.2: USB disconnect, device number 16
usb 1-4.1.2: new high-speed USB device number 17 using ehci-pci
usb 1-4.1.2: New USB device found, idVendor=058f, idProduct=6387
usb 1-4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.1.2: Product: Rainbow Line
usb 1-4.1.2: Manufacturer: Intenso
usb 1-4.1.2: SerialNumber: AA00000000002141
usb-storage 1-4.1.2:1.0: USB Mass Storage device detected
scsi13 : usb-storage 1-4.1.2:1.0
scsi 13:0:0:0: Direct-Access Intenso Rainbow Line 1100 PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: Attached scsi generic sg7 type 0
sd 13:0:0:0: [sdg] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB)
sd 13:0:0:0: [sdg] Write Protect is off
sd 13:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 13:0:0:0: [sdg] No Caching mode page found
sd 13:0:0:0: [sdg] Assuming drive cache: write through
sd 13:0:0:0: [sdg] No Caching mode page found
sd 13:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
sd 13:0:0:0: [sdg] No Caching mode page found
sd 13:0:0:0: [sdg] Assuming drive cache: write through
sd 13:0:0:0: [sdg] Attached SCSI removable disk
FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-4.1.2: USB disconnect, device number 17
usb 1-4: USB disconnect, device number 13
usb 1-4.1: USB disconnect, device number 14
usb 1-4.1.1: USB disconnect, device number 15
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 7:0:0:0: [sdd] Synchronizing SCSI cache
sd 4:0:0:0: [sdc] Synchronizing SCSI cache
sd 4:0:0:0: [sdc] Stopping disk
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 7:0:0:0: [sdd] Stopping disk
parport_pc 00:08: disabled
sd 2:0:0:0: [sda] Synchronizing SCSI cache
serial 00:07: disabled
sd 3:0:0:0: [sdb] Stopping disk
serial 00:07: System wakeup disabled by ACPI
sd 2:0:0:0: [sda] Stopping disk
[drm] Disabling audio 0 support
PM: suspend of devices complete after 14106.555 msecs
PM: late suspend of devices complete after 0.286 msecs
pcieport 0000:00:1c.5: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.775 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x3
CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x2
CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28
CPU3 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 141.600 msecs
PM: early resume of devices complete after 0.104 msecs
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
usb usb6: root hub lost power or was reset
pcieport 0000:00:1c.5: System wakeup disabled by ACPI
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
usb usb7: root hub lost power or was reset
usb usb8: root hub lost power or was reset
snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
serial 00:07: activated
parport_pc 00:08: activated
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800db130c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800db130c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90004f1c598
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
r8169 0000:04:00.0 eth0: link down
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
usb 5-2: reset full-speed USB device number 3 using uhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 5 succeeded
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: configured for UDMA/100
[drm:rv770_dpm_set_power_state] *ERROR* rv770_set_sw_state failed
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
floppy driver state
-------------------
now=4302335680 last interrupt=4294892538 diff=7443142 last called handler=reset_interrupt [floppy]
timeout_message=lock fdc
last output bytes:
0 0 0
0 0 0
0 0 0
8 80 4294892537
8 80 4294892537
8 80 4294892537
8 80 4294892537
e 80 4294892537
13 80 4294892537
0 90 4294892537
1a 90 4294892537
0 90 4294892537
12 90 4294892537
0 90 4294892537
14 90 4294892537
18 80 4294892537
8 80 4294892538
8 80 4294892538
8 80 4294892538
8 80 4294892538
last result at 4294892538
last redo_fd_request at 4299645576
status=0
fdc_busy=1
do_floppy=reset_interrupt [floppy]
cont=ffffffffa00e33e0
current_req= (null)
command_status=-1
floppy0: floppy timeout called
r8169 0000:04:00.0 eth0: link up
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] Starting disk
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: configured for UDMA/133
sd 7:0:0:0: [sdd] Starting disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
sd 3:0:0:0: [sdb] Starting disk
ata5: softreset failed (device not ready)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sdc] Starting disk
PM: resume of devices complete after 11631.788 msecs
PM: Finishing wakeup.
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pcieport 0000:00:01.0: no hotplug settings from platform
radeon 0000:01:00.0: no hotplug settings from platform
snd_hda_intel 0000:01:00.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: no hotplug settings from platform
uhci_hcd 0000:00:1a.0: using default PCI settings
uhci_hcd 0000:00:1a.1: no hotplug settings from platform
uhci_hcd 0000:00:1a.1: using default PCI settings
uhci_hcd 0000:00:1a.2: no hotplug settings from platform
uhci_hcd 0000:00:1a.2: using default PCI settings
ehci-pci 0000:00:1a.7: no hotplug settings from platform
ehci-pci 0000:00:1a.7: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pata_jmicron 0000:03:00.0: no hotplug settings from platform
pcieport 0000:00:1c.5: no hotplug settings from platform
r8169 0000:04:00.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: no hotplug settings from platform
uhci_hcd 0000:00:1d.0: using default PCI settings
uhci_hcd 0000:00:1d.1: no hotplug settings from platform
uhci_hcd 0000:00:1d.1: using default PCI settings
uhci_hcd 0000:00:1d.2: no hotplug settings from platform
uhci_hcd 0000:00:1d.2: using default PCI settings
ehci-pci 0000:00:1d.7: no hotplug settings from platform
ehci-pci 0000:00:1d.7: using default PCI settings
pci 0000:00:1e.0: no hotplug settings from platform
pci 0000:00:1e.0: using default PCI settings
snd_virtuoso 0000:05:01.0: no hotplug settings from platform
snd_virtuoso 0000:05:01.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
i801_smbus 0000:00:1f.3: no hotplug settings from platform
i801_smbus 0000:00:1f.3: using default PCI settings
Restarting tasks ... done.
usb 1-4: new high-speed USB device number 18 using ehci-pci
usb 1-4: New USB device found, idVendor=0424, idProduct=2504
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
usb 1-4.1: new high-speed USB device number 19 using ehci-pci
usb 1-4.1: New USB device found, idVendor=0424, idProduct=2503
usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 3 ports detected
usb 1-4.1.1: new high-speed USB device number 20 using ehci-pci
usb 1-4.1.1: New USB device found, idVendor=0424, idProduct=2228
usb 1-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.1.1: Product: Flash Card Reader
usb 1-4.1.1: Manufacturer: Generic
usb 1-4.1.1: SerialNumber: 000022272228
usb-storage 1-4.1.1:1.0: USB Mass Storage device detected
scsi14 : usb-storage 1-4.1.1:1.0
scsi 14:0:0:0: Direct-Access Generic Flash HS-CF 4.49 PQ: 0 ANSI: 0
scsi 14:0:0:1: Direct-Access Generic Flash HS-COMBO 4.49 PQ: 0 ANSI: 0
sd 14:0:0:0: Attached scsi generic sg5 type 0
sd 14:0:0:1: Attached scsi generic sg6 type 0
sd 14:0:0:0: [sde] Attached SCSI removable disk
sd 14:0:0:1: [sdf] Attached SCSI removable disk