dmesg - valley
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.0-0.rc8.git0.1.fc21.x86_64 (mockbuild@bkernel02) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-14) (GCC) ) #1 SMP Tue Mar 25 14:01:40 UTC 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd732fff] usable
BIOS-e820: [mem 0x00000000dd733000-0x00000000dda8bfff] reserved
BIOS-e820: [mem 0x00000000dda8c000-0x00000000dda9bfff] ACPI data
BIOS-e820: [mem 0x00000000dda9c000-0x00000000ddbc5fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddbc6000-0x00000000de7fafff] reserved
BIOS-e820: [mem 0x00000000de7fb000-0x00000000de7fbfff] usable
BIOS-e820: [mem 0x00000000de7fc000-0x00000000de83efff] ACPI NVS
BIOS-e820: [mem 0x00000000de83f000-0x00000000dec5efff] usable
BIOS-e820: [mem 0x00000000dec5f000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P8Z77-V LE PLUS, BIOS 0901 02/25/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x81f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 800000000 write-back
1 base 800000000 mask FF0000000 write-back
2 base 810000000 mask FF8000000 write-back
3 base 818000000 mask FFC000000 write-back
4 base 81C000000 mask FFE000000 write-back
5 base 81E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8b0-0x000fd8bf] mapped at [ffff8800000fd8b0]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0201b000, 0x0201bfff] PGTABLE
BRK [0x0201c000, 0x0201cfff] PGTABLE
BRK [0x0201d000, 0x0201dfff] PGTABLE
init_memory_mapping: [mem 0x81ee00000-0x81effffff]
[mem 0x81ee00000-0x81effffff] page 2M
BRK [0x0201e000, 0x0201efff] PGTABLE
init_memory_mapping: [mem 0x81c000000-0x81edfffff]
[mem 0x81c000000-0x81edfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x81bffffff]
[mem 0x800000000-0x81bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdd732fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdd5fffff] page 2M
[mem 0xdd600000-0xdd732fff] page 4k
init_memory_mapping: [mem 0xde7fb000-0xde7fbfff]
[mem 0xde7fb000-0xde7fbfff] page 4k
BRK [0x0201f000, 0x0201ffff] PGTABLE
init_memory_mapping: [mem 0xde83f000-0xdec5efff]
[mem 0xde83f000-0xde9fffff] page 4k
[mem 0xdea00000-0xdebfffff] page 2M
[mem 0xdec00000-0xdec5efff] page 4k
BRK [0x02020000, 0x02020fff] PGTABLE
init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
[mem 0xdeff4000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 2M
RAMDISK: [mem 0x368ad000-0x3744efff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000dda8f078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dda99cd0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000dda8f170 00AB60 (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 00000000ddbc4080 000040
ACPI: APIC 00000000dda99de0 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000dda99e78 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000dda99ec0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000dda99f00 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000dda99f38 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000dda9acb0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 00000000dda9a300 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081effffff]
Initmem setup node 0 [mem 0x00000000-0x81effffff]
NODE_DATA [mem 0x81efca000-0x81efddfff]
[ffffea0000000000-ffffea00207fffff] PMD -> [ffff8807fe600000-ffff88081e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x81effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xdd732fff]
node 0: [mem 0xde7fb000-0xde7fbfff]
node 0: [mem 0xde83f000-0xdec5efff]
node 0: [mem 0xdeff4000-0xdeffffff]
node 0: [mem 0x100000000-0x81effffff]
On node 0 totalpages: 8375036
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14126 pages used for memmap
DMA32 zone: 904032 pages, LIFO batch:31
Normal zone: 116672 pages used for memmap
Normal zone: 7467008 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd733000-0xdda8bfff]
PM: Registered nosave memory: [mem 0xdda8c000-0xdda9bfff]
PM: Registered nosave memory: [mem 0xdda9c000-0xddbc5fff]
PM: Registered nosave memory: [mem 0xddbc6000-0xde7fafff]
PM: Registered nosave memory: [mem 0xde7fc000-0xde83efff]
PM: Registered nosave memory: [mem 0xdec5f000-0xdeff3fff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88081ec00000 s86848 r8192 d23744 u262144
pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8244153
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 32879884K/33500144K available (7178K kernel code, 1079K rwdata, 3040K rodata, 1444K init, 1644K bss, 620260K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:65792 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3605.583 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7211.16 BogoMIPS (lpj=3605583)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 24K (ffffffff81e78000 - ffffffff81e7e000)
ftrace: allocating 26301 entries in 103 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (57689.32 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdda9c000-0xddbc5fff] (1220608 bytes)
PM: Registering ACPI NVS region [mem 0xde7fc000-0xde83efff] (274432 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 7:44:06, date: 03/27/14
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000dda39018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000dda3aa98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000dda3bc18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7600000-0xf760ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf761a000-0xf761a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7618000-0xf76183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7610000-0xf7613fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7617000-0xf76173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7616000-0xf76167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7615000-0xf76150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1189] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: [14f1:8880] type 00 class 0x040000
pci 0000:02:00.0: reg 0x10: [mem 0xf7200000-0xf73fffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xf7200000-0xf73fffff]
pci 0000:03:00.0: [10b5:8112] type 01 class 0x060400
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:04.0: [13f6:8788] type 00 class 0x040100
pci 0000:04:04.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:04:04.0: supports D1 D2
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:07:01.0: [1102:0007] type 00 class 0x040100
pci 0000:07:01.0: reg 0x10: [io 0xb000-0xb01f]
pci 0000:07:01.0: supports D1 D2
pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:06:00.0: bridge window [io 0xb000-0xbfff] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:08:00.0: [1b4b:9120] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io 0xa090-0xa097]
pci 0000:08:00.0: reg 0x14: [io 0xa080-0xa083]
pci 0000:08:00.0: reg 0x18: [io 0xa070-0xa077]
pci 0000:08:00.0: reg 0x1c: [io 0xa060-0xa063]
pci 0000:08:00.0: reg 0x20: [io 0xa050-0xa05f]
pci 0000:08:00.0: reg 0x24: [mem 0xf7515000-0xf75157ff]
pci 0000:08:00.0: reg 0x30: [mem 0xf7500000-0xf750ffff pref]
pci 0000:08:00.0: PME# supported from D3hot
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 08]
pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.6: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:09:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xf7400000-0xf7407fff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7: bridge window [mem 0xf7400000-0xf74fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd733000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde7fc000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec5f000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f000000-0x81fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xe0000000-0xe0000fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xf7200000-0xf73fffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: PCI bridge to [bus 06-07]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: PCI bridge to [bus 08]
pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.6: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7: bridge window [mem 0xf7400000-0xf74fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf73fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:06: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:06: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:07: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:07: resource 4 [io 0xb000-0xbfff]
pci_bus 0000:07: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:07: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:07: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:07: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:07: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:07: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:07: resource 17 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:08: resource 0 [io 0xa000-0xafff]
pci_bus 0000:08: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:09: resource 1 [mem 0xf7400000-0xf74fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 11912K (ffff8800368ad000 - ffff88003744f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9733000-0xdd733000] (64MB) mapped at [ffff8800d9733000-ffff8800dd732fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
AVX version of gcm_enc/dec engaged.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1395906245.364:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xf7616000 port 0xf7616380 irq 42
ahci 0000:08:00.0: irq 43 for MSI/MSI-X
ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf7515000 port 0xf7515100 irq 43
ata8: SATA max UDMA/133 abar m2048@0xf7515000 port 0xf7515180 irq 43
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7618000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.0-0.rc8.git0.1.fc21.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7617000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.14.0-0.rc8.git0.1.fc21.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.14.0-0.rc8.git0.1.fc21.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.14.0-0.rc8.git0.1.fc21.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:09:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 52 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.14.0-0.rc8.git0.1.fc21.x86_64 xhci_hcd
usb usb5: SerialNumber: 0000:09:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.14.0-0.rc8.git0.1.fc21.x86_64 xhci_hcd
usb usb6: SerialNumber: 0000:09:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 3c39c5f8c4084889a4320b55088d0672319b947d'
registered taskstats version 1
Magic number: 6:435:724
rtc_cmos 00:05: setting system clock to 2014-03-27 07:44:06 UTC (1395906246)
PM: Hibernation image not present or could not be loaded.
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 330)
ACPI Error:
ata8: SATA link down (SStatus 0 SControl 330)
[DSSP]
Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8807fe0700f0), AE_NOT_FOUND (20131218/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe070348), AE_NOT_FOUND (20131218/psparse-536)
ata6.00: ATAPI: HL-DT-ST BD-RE BH08LS20, 1.00, max UDMA/133
ata1.00: ATA-8: ST31500541AS, CC34, max UDMA/133
ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8807fe0700f0), AE_NOT_FOUND (20131218/psparse-536)
ata1.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359)
scsi 0:0:0:0: Direct-Access ATA ST31500541AS CC34 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe070348), AE_NOT_FOUND (20131218/psparse-536)
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata6.00: configured for UDMA/133
scsi 5:0:0:0: CD-ROM HL-DT-ST BD-RE BH08LS20 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1444K (ffffffff81d0f000 - ffffffff81e78000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1004K (ffff880001705000 - ffff880001800000)
Freeing unused kernel memory: 1056K (ffff880001af8000 - ffff880001c00000)
random: systemd urandom read with 28 bits of entropy available
systemd[1]: systemd 212 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[205]: starting version 212
usb 2-1: new high-speed USB device number 2 using ehci-pci
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-2: new high-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3605.658 MHz
usb 3-2: New USB device found, idVendor=0424, idProduct=2514
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
random: nonblocking pool is initialized
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 5-1: New USB device found, idVendor=0403, idProduct=6010
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: FT2232H device
usb 5-1: Manufacturer: FTDI
usb 5-1: SerialNumber: FTT85G5P
usb 5-2: new high-speed USB device number 3 using xhci_hcd
usb 5-2: New USB device found, idVendor=04b8, idProduct=0007
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: USB2.0 Printer (Hi-speed)
usb 5-2: Manufacturer: EPSON
usb 5-2: SerialNumber: 485230313148DBCCB7
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0158
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: USB2.0-CRW
usb 1-1.1: Manufacturer: Generic
usb 1-1.1: SerialNumber: 20060413092100000
usbcore: registered new interface driver usb-storage
ums-realtek 1-1.1:1.0: USB Mass Storage device detected
scsi8 : usb-storage 1-1.1:1.0
usbcore: registered new interface driver ums-realtek
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
Switched to clocksource tsc
PM: Starting manual resume from disk
PM: Hibernation image partition 8:10 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 2-1.5: New USB device found, idVendor=1532, idProduct=011a
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: Razer BlackWidow Ultimate 2013
usb 2-1.5: Manufacturer: Razer
input: Razer Razer BlackWidow Ultimate 2013 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:1532:011A.0001/input/input5
hid-generic 0003:1532:011A.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2013] on usb-0000:00:1d.0-1.5/input0
input: Razer Razer BlackWidow Ultimate 2013 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:1532:011A.0002/input/input6
hid-generic 0003:1532:011A.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2013] on usb-0000:00:1d.0-1.5/input1
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
input: Razer Razer BlackWidow Ultimate 2013 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:1532:011A.0003/input/input7
hid-generic 0003:1532:011A.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate 2013] on usb-0000:00:1d.0-1.5/input2
usb 2-1.6: new full-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c068
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: G500
usb 2-1.6: Manufacturer: Logitech
usb 2-1.6: SerialNumber: CE48E961530018
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C068.0004/input/input8
hid-generic 0003:046D:C068.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C068.0005/input/input9
hid-generic 0003:046D:C068.0005: input,hiddev0,hidraw4: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6/input1
usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
systemd-journald[153]: Received SIGTERM from PID 1 (systemd).
usb 3-2.1: New USB device found, idVendor=0424, idProduct=2640
usb 3-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-2.1:1.0: USB hub found
hub 3-2.1:1.0: 2 ports detected
usb 3-2.2: new full-speed USB device number 4 using xhci_hcd
usb 3-2.2: New USB device found, idVendor=0403, idProduct=6001
usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.2: Product: FT232R USB UART
usb 3-2.2: Manufacturer: FTDI
usb 3-2.2: SerialNumber: A702RBMD
usb 3-2.1.1: new high-speed USB device number 5 using xhci_hcd
usb 3-2.1.1: New USB device found, idVendor=0424, idProduct=4064
usb 3-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.1.1: Product: Ultra Fast Media Reader
usb 3-2.1.1: Manufacturer: Generic
usb 3-2.1.1: SerialNumber: T12000135499
usb-storage 3-2.1.1:1.0: USB Mass Storage device detected
scsi9 : usb-storage 3-2.1.1:1.0
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit: type=1404 audit(1395906249.125:2): selinux=0 auid=4294967295 ses=4294967295
systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 3981312 512-byte logical blocks: (2.03 GB/1.89 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI removable disk
scsi 9:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.90 PQ: 0 ANSI: 0
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:0: [sdc] Attached SCSI removable disk
systemd-readahead[360]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
systemd-udevd[391]: starting version 212
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
EXT4-fs (sda9): re-mounted. Opts: (null)
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU0 updated to revision 0x19, date = 2013-06-13
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU1 updated to revision 0x19, date = 2013-06-13
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU2 updated to revision 0x19, date = 2013-06-13
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU3 updated to revision 0x19, date = 2013-06-13
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU4 updated to revision 0x19, date = 2013-06-13
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU5 updated to revision 0x19, date = 2013-06-13
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU6 updated to revision 0x19, date = 2013-06-13
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x16
microcode: CPU7 updated to revision 0x19, date = 2013-06-13
microcode: Microcode Update Driver: v2.00 , Peter Oruba
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
alg: No test for crc32 (crc32-pclmul)
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
mei_me 0000:00:16.0: irq 53 for MSI/MSI-X
media: Linux media interface: v0.10
Linux video capture interface: v2.00
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 54 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168f/8111f at 0xffffc9000303a000, 10:bf:48:b9:86:47, XID 08000800 IRQ 54
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
asus_wmi: Disabling ACPI video driver
Adding 16457724k swap on /dev/sda10. Priority:-1 extents:1 across:16457724k FS
systemd-udevd[421]: renamed network interface eth0 to p4p1
usblp 5-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007
usbcore: registered new interface driver usblp
usbcore: registered new interface driver ftdi_sio
ftdi_sio 5-1:1.0: FTDI USB Serial Device converter detected
usb 5-1: Detected FT2232H
usb 5-1: Number of endpoints 2
usb 5-1: Endpoint 1 MaxPacketSize 512
usb 5-1: Endpoint 2 MaxPacketSize 512
usb 5-1: Setting MaxPacketSize 512
usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio 5-1:1.1: FTDI USB Serial Device converter detected
usb 5-1: Detected FT2232H
usb 5-1: Number of endpoints 2
usb 5-1: Endpoint 1 MaxPacketSize 512
usb 5-1: Endpoint 2 MaxPacketSize 512
usb 5-1: Setting MaxPacketSize 512
usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB1
ftdi_sio 3-2.2:1.0: FTDI USB Serial Device converter detected
usb 3-2.2: Detected FT232RL
usb 3-2.2: Number of endpoints 2
usb 3-2.2: Endpoint 1 MaxPacketSize 64
usb 3-2.2: Endpoint 2 MaxPacketSize 64
usb 3-2.2: Setting MaxPacketSize 64
usb 3-2.2: FTDI USB Serial Device converter now attached to ttyUSB2
snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
cx23885 driver version 0.0.3 loaded
CORE cx23885[0]: subsystem: 0070:2259, board: Hauppauge WinTV-HVR1255 [card=36,autodetected]
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
hda_intel: Disabling MSI
ALSA sound/pci/hda/hda_intel.c:3186 0000:01:00.1: Handle VGA-switcheroo audio client
ALSA sound/pci/hda/hda_intel.c:3666 0000:01:00.1: Disabling 64bit DMA
ALSA sound/pci/hda/hda_intel.c:1760 0000:01:00.1: Enable delay in RIRB handling
ALSA sound/pci/hda/patch_realtek.c:434 SKU: Nid=0x1d sku_cfg=0x4005e601
ALSA sound/pci/hda/patch_realtek.c:436 SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:437 SKU: enable_pcbeep=0x0
ALSA sound/pci/hda/patch_realtek.c:438 SKU: check_sum=0x00000005
ALSA sound/pci/hda/patch_realtek.c:439 SKU: customization=0x000000e6
ALSA sound/pci/hda/patch_realtek.c:440 SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:441 SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:442 SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:443 SKU: override=0x1
ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x11/0x1e
ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x19
ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18
ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a
ALSA sound/pci/hda/patch_realtek.c:504 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:520 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input18
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card2/input17
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input13
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input12
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input11
tveeprom 0-0050: Hauppauge model 22111, rev E2F5, serial# 8351856
tveeprom 0-0050: MAC address is 00:0d:fe:7f:70:70
tveeprom 0-0050: tuner model is NXP 18271C2 (idx 155, type 54)
tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
tveeprom 0-0050: audio processor is CX23888 (idx 40)
tveeprom 0-0050: decoder processor is CX23888 (idx 34)
tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter
cx23885[0]: hauppauge eeprom: model=22111
cx25840 2-0044: cx23888 A/V decoder found @ 0x88 (cx23885[0])
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input20
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input19
cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
cx23885[0]: registered device video0 [v4l2]
cx23885[0]: registered device vbi0
cx23885[0]: registered ALSA audio device
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
tda18271 1-0060: creating new instance
TDA18271HD/C2 detected @ 1-0060
tda18271 1-0060: attaching existing instance
DVB: registering new adapter (cx23885[0])
cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
cx23885_dev_checkrevision() Hardware revision = 0xd0
cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xf7200000
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 334.21 Thu Feb 27 15:55:45 PST 2014
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[367]: Received request to flush runtime journal from PID 1
audit: type=1305 audit(1395931459.924:3): audit_pid=952 old=0 auid=4294967295 ses=4294967295 res=1
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x493 offMax=0x24f2
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bridge firewalling registered
cfg80211: Calling CRDA to update world regulatory domain
r8169 0000:05:00.0 p4p1: link down
r8169 0000:05:00.0 p4p1: link down
IPv6: ADDRCONF(NETDEV_UP): p4p1: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
r8169 0000:05:00.0 p4p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p4p1: link becomes ready
usblp0: removed
usblp 5-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007
nvidia 0000:01:00.0: irq 56 for MSI/MSI-X
nvidia 0000:01:00.0: irq 56 for MSI/MSI-X
fuse init (API version 7.22)
Bluetooth: Core ver 2.18
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
xor: automatically using best checksumming function:
avx : 12544.000 MB/sec
raid6: sse2x1 4621 MB/s
raid6: sse2x2 6152 MB/s
raid6: sse2x4 7980 MB/s
raid6: using algorithm sse2x4 (7980 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab at 1
Btrfs loaded
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 3-2.1: USB disconnect, device number 3
usb 3-2.1.1: USB disconnect, device number 5
usb 3-2: USB disconnect, device number 2
usb 3-2.2: USB disconnect, device number 4
ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
ftdi_sio 3-2.2:1.0: device disconnected