dmesg - bor
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000cca22fff] usable
BIOS-e820: [mem 0x00000000cca23000-0x00000000cd123fff] reserved
BIOS-e820: [mem 0x00000000cd124000-0x00000000cd133fff] ACPI data
BIOS-e820: [mem 0x00000000cd134000-0x00000000cd25afff] ACPI NVS
BIOS-e820: [mem 0x00000000cd25b000-0x00000000cd820fff] reserved
BIOS-e820: [mem 0x00000000cd821000-0x00000000cd821fff] usable
BIOS-e820: [mem 0x00000000cd822000-0x00000000cd864fff] ACPI NVS
BIOS-e820: [mem 0x00000000cd865000-0x00000000cdc86fff] usable
BIOS-e820: [mem 0x00000000cdc87000-0x00000000cdff3fff] reserved
BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P8Z77-V LX, BIOS 1502 11/09/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 0D0000000 mask FF0000000 uncachable
4 base 0CF000000 mask FFF000000 uncachable
5 base 21FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3328MB, range: 256MB, type UC
reg 4, base: 3312MB, range: 16MB, type UC
reg 5, base: 8702MB, range: 2MB, type UC
total RAM covered: 7918M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3312MB, range: 16MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 512MB, type WB
reg 6, base: 8702MB, range: 2MB, type UC
e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at [ffff8800000fd870]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x21fc00000-0x21fdfffff]
[mem 0x21fc00000-0x21fdfffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21fbfffff]
[mem 0x21c000000-0x21fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x40003fff]
[mem 0x20200000-0x3fffffff] page 2M
[mem 0x40000000-0x40003fff] page 4k
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x40005000-0xcca22fff]
[mem 0x40005000-0x401fffff] page 4k
[mem 0x40200000-0xcc9fffff] page 2M
[mem 0xcca00000-0xcca22fff] page 4k
init_memory_mapping: [mem 0xcd821000-0xcd821fff]
[mem 0xcd821000-0xcd821fff] page 4k
init_memory_mapping: [mem 0xcd865000-0xcdc86fff]
[mem 0xcd865000-0xcd9fffff] page 4k
[mem 0xcda00000-0xcdbfffff] page 2M
[mem 0xcdc00000-0xcdc86fff] page 4k
init_memory_mapping: [mem 0xcdff4000-0xcdffffff]
[mem 0xcdff4000-0xcdffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x35eee000-0x36f6efff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000cd127080 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000cd131ca0 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000cd127188 0AB17 (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 00000000cd259080 00040
ACPI: APIC 00000000cd131db0 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000cd131e28 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000cd131e70 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000cd131eb0 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000cd131ee8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000cd132258 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000cd132c08 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT 00000000cd1337b0 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 00000000cd1336f8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
Initmem setup node 0 [mem 0x00000000-0x21fdfffff]
NODE_DATA [mem 0x21fdf1000-0x21fdf5fff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217800000-ffff88021f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0xcca22fff]
node 0: [mem 0xcd821000-0xcd821fff]
node 0: [mem 0xcd865000-0xcdc86fff]
node 0: [mem 0xcdff4000-0xcdffffff]
node 0: [mem 0x100000000-0x21fdfffff]
On node 0 totalpages: 2017773
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13042 pages used for memmap
DMA32 zone: 834641 pages, LIFO batch:31
Normal zone: 18424 pages used for memmap
Normal zone: 1179136 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xcca23000-0xcd123fff]
PM: Registered nosave memory: [mem 0xcd124000-0xcd133fff]
PM: Registered nosave memory: [mem 0xcd134000-0xcd25afff]
PM: Registered nosave memory: [mem 0xcd25b000-0xcd820fff]
PM: Registered nosave memory: [mem 0xcd822000-0xcd864fff]
PM: Registered nosave memory: [mem 0xcdc87000-0xcdff3fff]
PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88021fa00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1986222
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7844084K/8071092K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 227008K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 32505856 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3008.805 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6017.61 BogoMIPS (lpj=12035220)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000cd0a6000 end: 0x000000cd0b7fff
dmar: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (24070.44 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcd134000-0xcd25afff] (1208320 bytes)
PM: Registering ACPI NVS region [mem 0xcd822000-0xcd864fff] (274432 bytes)
regulator-dummy: no parameters
RTC time: 11:00:58, date: 03/26/14
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000cd0d1018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000cd0d2a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000cd0d3c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x18) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xcca23000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd822000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcdc87000-0xcfffffff]
e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xdf200000-0xdf200fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.5: PCI bridge to [bus 04-05]
pci 0000:04:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 17 [mem 0xdf200000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16900K (ffff880035eee000 - ffff880036f6f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc8a23000-0xcca23000] (64MB) mapped at [ffff8800c8a23000-ffff8800cca22fff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1395831658.404:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15353
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 56k, total 64k
efifb: mode is 640x350x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x43
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7c18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 6:63:25
memory memory65: hash matches
rtc_cmos 00:05: setting system clock to 2014-03-26 11:00:59 UTC (1395831659)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[115]: starting version 204
libahci: module verification failed: signature and/or required key missing - tainting kernel
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 45 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c2e000, 50:46:5d:64:31:2e, XID 0c900800 IRQ 45
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16180 irq 44
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880214b99140), AE_NOT_FOUND (20130517/psparse-536)
ata1.00: ATA-9: Samsung SSD 840 Series, DXT08B0Q, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880214b99140), AE_NOT_FOUND (20130517/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880214b991b8), AE_NOT_FOUND (20130517/psparse-536)
ata1.00: configured for UDMA/133
ata2.00: ATA-8: ST31000524AS, JC45, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880214b991b8), AE_NOT_FOUND (20130517/psparse-536)
ata2.00: configured for UDMA/133
sda: sda1 sda2
scsi 1:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-3: new full-speed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=046d, idProduct=c52b
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
tsc: Refined TSC clocksource calibration: 3008.836 MHz
usb 3-4: new full-speed USB device number 3 using xhci_hcd
usb 3-4: New USB device found, idVendor=046d, idProduct=c52b
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: USB Receiver
usb 3-4: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=148f, idProduct=3070
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: 802.11 n WLAN
usb 1-1.1: Manufacturer: Ralink
usb 1-1.1: SerialNumber: 1.0
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.7: new high-speed USB device number 3 using ehci-pci
usb 2-1.7: New USB device found, idVendor=046d, idProduct=082b
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.7: Product: Webcam C170
usb 2-1.7: Manufacturer:
usb 2-1.8: new full-speed USB device number 4 using ehci-pci
usb 2-1.8: New USB device found, idVendor=03f0, idProduct=7304
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: Product: deskjet 3500
usb 2-1.8: Manufacturer: hp
usb 2-1.8: SerialNumber: TH398120JX76
Switched to clocksource tsc
input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input2
logitech-djdevice 0003:046D:C52B.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-3:1
Adding 8070140k swap on /dev/sdb4. Priority:-1 extents:1 across:8070140k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[300]: starting version 204
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Memory usable by graphics device = 2048M
checking generic (a0000 e000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: setting latency timer to 64
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
i915 0000:00:02.0: irq 47 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
lp: driver loaded but no devices found
type=1400 audit(1395828064.169:2): apparmor="STATUS" operation="profile_load" parent=333 profile="unconfined" name="/sbin/dhclient" pid=364 comm="apparmor_parser"
type=1400 audit(1395828064.169:3): apparmor="STATUS" operation="profile_load" parent=333 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=364 comm="apparmor_parser"
type=1400 audit(1395828064.169:4): apparmor="STATUS" operation="profile_load" parent=333 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
type=1400 audit(1395828064.169:5): apparmor="STATUS" operation="profile_replace" parent=333 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=364 comm="apparmor_parser"
type=1400 audit(1395828064.169:6): apparmor="STATUS" operation="profile_replace" parent=333 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
type=1400 audit(1395828064.169:7): apparmor="STATUS" operation="profile_replace" parent=333 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
Console: switching to colour frame buffer device 170x96
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:4a: registered as cooling_device9
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4004c601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000004
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0887
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
usbcore: registered new interface driver snd-usb-audio
input: Webcam C170 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
asus_wmi: Backlight controlled by ACPI video driver
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
init: failsafe main process (629) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1395828070.553:8): apparmor="STATUS" operation="profile_load" parent=728 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=733 comm="apparmor_parser"
type=1400 audit(1395828070.553:9): apparmor="STATUS" operation="profile_load" parent=728 profile="unconfined" name="chromium_browser" pid=733 comm="apparmor_parser"
type=1400 audit(1395828070.553:10): apparmor="STATUS" operation="profile_load" parent=728 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=734 comm="apparmor_parser"
type=1400 audit(1395828070.553:11): apparmor="STATUS" operation="profile_load" parent=728 profile="unconfined" name="chromium_browser" pid=734 comm="apparmor_parser"
type=1400 audit(1395828070.557:12): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="chromium_browser" pid=733 comm="apparmor_parser"
type=1400 audit(1395828070.557:13): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="chromium_browser" pid=734 comm="apparmor_parser"
type=1400 audit(1395828070.557:14): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/sbin/dhclient" pid=736 comm="apparmor_parser"
type=1400 audit(1395828070.557:15): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=736 comm="apparmor_parser"
type=1400 audit(1395828070.557:16): apparmor="STATUS" operation="profile_replace" parent=728 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=736 comm="apparmor_parser"
type=1400 audit(1395828070.557:17): apparmor="STATUS" operation="profile_load" parent=728 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=735 comm="apparmor_parser"
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (766) terminated with status 1
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: Logitech Unifying Device. Wireless PID:4004 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0006/input/input12
logitech-djdevice 0003:046D:C52B.0008: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4004] on usb-0000:00:14.0-4:1
WARNING! power/level is deprecated; use power/control instead
usblp 2-1.8:1.0: usblp2: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7304
usbcore: registered new interface driver usblp
wlan1: authenticate with 00:02:cf:c1:d9:d0
wlan1: send auth to 00:02:cf:c1:d9:d0 (try 1/3)
wlan1: authenticated
rt2800usb 1-1.1:1.0 wlan1: disabling HT/VHT due to WEP/TKIP use
rt2800usb 1-1.1:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
rt2800usb 1-1.1:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 00:02:cf:c1:d9:d0 (try 1/3)
wlan1: RX AssocResp from 00:02:cf:c1:d9:d0 (capab=0x471 status=0 aid=3)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
systemd-hostnamed[2531]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
do_trap: 144 callbacks suppressed
traps: software-center[2644] trap int3 ip:7f52fa6d73c9 sp:7fffca0f21f0 error:0
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
systemd-hostnamed[8318]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 0
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 0
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 0
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping