dmesg - craydirty
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-17-generic (buildd@toyol) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #31-Ubuntu SMP Mon Feb 3 21:52:43 UTC 2014 (Ubuntu 3.11.0-17.31-generic 3.11.10.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000e7053fff] usable
BIOS-e820: [mem 0x00000000e7054000-0x00000000e70a2fff] ACPI NVS
BIOS-e820: [mem 0x00000000e70a3000-0x00000000e70aafff] ACPI data
BIOS-e820: [mem 0x00000000e70ab000-0x00000000e73c8fff] reserved
BIOS-e820: [mem 0x00000000e73c9000-0x00000000e73c9fff] usable
BIOS-e820: [mem 0x00000000e73ca000-0x00000000e73d9fff] reserved
BIOS-e820: [mem 0x00000000e73da000-0x00000000e73e3fff] ACPI NVS
BIOS-e820: [mem 0x00000000e73e4000-0x00000000e740bfff] reserved
BIOS-e820: [mem 0x00000000e740c000-0x00000000e744efff] ACPI NVS
BIOS-e820: [mem 0x00000000e744f000-0x00000000e7689fff] reserved
BIOS-e820: [mem 0x00000000e768a000-0x00000000e77fffff] usable
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004177fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System76, Inc. Wildebeest Performance/DH67BL, BIOS BLH6710H.86A.0122.2011.0601.1554 06/01/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x417800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FE0000000 write-back
2 base 0E8000000 mask FF8000000 uncachable
3 base 0F0000000 mask FF0000000 uncachable
4 base 417800000 mask FFF800000 uncachable
5 base 418000000 mask FF8000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 3712MB, range: 128MB, type UC
reg 3, base: 3840MB, range: 256MB, type UC
reg 4, base: 16760MB, range: 8MB, type UC
reg 5, base: 16768MB, range: 128MB, type UC
total RAM covered: 16376M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 512M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3712MB, range: 128MB, type UC
reg 2, base: 3840MB, range: 256MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16760MB, range: 8MB, type UC
reg 7, base: 16768MB, range: 128MB, type UC
e820: update [mem 0xe8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xe7800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcee0-0x000fceef] mapped at [ffff8800000fcee0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x417600000-0x4177fffff]
[mem 0x417600000-0x4177fffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x414000000-0x4175fffff]
[mem 0x414000000-0x4175fffff] page 2M
init_memory_mapping: [mem 0x400000000-0x413ffffff]
[mem 0x400000000-0x413ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xe7053fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xe6ffffff] page 2M
[mem 0xe7000000-0xe7053fff] page 4k
init_memory_mapping: [mem 0xe73c9000-0xe73c9fff]
[mem 0xe73c9000-0xe73c9fff] page 4k
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0xe768a000-0xe77fffff]
[mem 0xe768a000-0xe77fffff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
RAMDISK: [mem 0x35eac000-0x36f4dfff]
ACPI: RSDP 00000000000f0450 00024 (v02 INTEL)
ACPI: XSDT 00000000e70a3068 0004C (v01 INTEL DH67BL 01072009 AMI 00010013)
ACPI: FACP 00000000e70aa3b0 000F4 (v04 INTEL DH67BL 01072009 AMI 00010013)
ACPI: DSDT 00000000e70a3140 0726B (v02 INTEL DH67BL 00000012 INTL 20051117)
ACPI: FACS 00000000e73dbf80 00040
ACPI: APIC 00000000e70aa4a8 00092 (v03 INTEL DH67BL 01072009 AMI 00010013)
ACPI: SSDT 00000000e70aa540 001D6 (v01 INTEL DH67BL 00000001 MSFT 03000001)
ACPI: MCFG 00000000e70aa718 0003C (v01 INTEL DH67BL 01072009 MSFT 00000097)
ACPI: HPET 00000000e70aa758 00038 (v01 INTEL DH67BL 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004177fffff]
Initmem setup node 0 [mem 0x00000000-0x4177fffff]
NODE_DATA [mem 0x4177eb000-0x4177effff]
[ffffea0000000000-ffffea00105fffff] PMD -> [ffff880406e00000-ffff880416dfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x4177fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xe7053fff]
node 0: [mem 0xe73c9000-0xe73c9fff]
node 0: [mem 0xe768a000-0xe77fffff]
node 0: [mem 0x100000000-0x4177fffff]
On node 0 totalpages: 4188519
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14728 pages used for memmap
DMA32 zone: 942539 pages, LIFO batch:31
Normal zone: 50656 pages used for memmap
Normal zone: 3241984 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xe7054000-0xe70a2fff]
PM: Registered nosave memory: [mem 0xe70a3000-0xe70aafff]
PM: Registered nosave memory: [mem 0xe70ab000-0xe73c8fff]
PM: Registered nosave memory: [mem 0xe73ca000-0xe73d9fff]
PM: Registered nosave memory: [mem 0xe73da000-0xe73e3fff]
PM: Registered nosave memory: [mem 0xe73e4000-0xe740bfff]
PM: Registered nosave memory: [mem 0xe740c000-0xe744efff]
PM: Registered nosave memory: [mem 0xe744f000-0xe7689fff]
PM: Registered nosave memory: [mem 0xe7800000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe7800000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880417400000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4123050
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16391272K/16754076K available (7150K kernel code, 1083K rwdata, 3312K rodata, 1364K init, 1420K bss, 362804K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.227 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.45 BogoMIPS (lpj=13568908)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27846 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (54275.63 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xe7054000-0xe70a2fff] (323584 bytes)
PM: Registering ACPI NVS region [mem 0xe73da000-0xe73e3fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xe740c000-0xe744efff] (274432 bytes)
regulator-dummy: no parameters
RTC time: 2:10:48, date: 02/25/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000e73e3898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 00000000e73dad98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe8000000-0xf7ffffff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7229000-0xf722900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7228000-0xf7228fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7227000-0xf72273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7220000-0xf7223fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7226000-0xf72263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7225000-0xf72257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7224000-0xf72240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:0de1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: [1283:8892] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xe7054000-0xe7ffffff]
e820: reserve RAM buffer [mem 0xe73ca000-0xe7ffffff]
e820: reserve RAM buffer [mem 0xe7800000-0xe7ffffff]
e820: reserve RAM buffer [mem 0x417800000-0x417ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [io 0x0400-0x0453] could not be reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xe8000000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17032K (ffff880035eac000 - ffff880036f4e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xe3054000-0xe7054000] (64MB) mapped at [ffff8800e3054000-ffff8800e7053fff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1393294247.396:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32047
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7227000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-17-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7226000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-17-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-17-generic xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-17-generic xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 2a3861a17986e2fcfa4fcad981cb7e6fd9516274'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 2:678:157
bdi 1:9: hash matches
acpi device:24: hash matches
rtc_cmos 00:03: setting system clock to 2014-02-25 02:10:48 UTC (1393294248)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[147]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 51 for MSI/MSI-X
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225100 irq 51
ata2: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225180 irq 51
ata3: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225200 irq 51
ata4: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225280 irq 51
ata5: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225300 irq 51
ata6: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225380 irq 51
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:69:95:e5:88:67
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: WDC WD10EALX-089BA0, 15.01H15, max UDMA/100
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATAPI: ATAPI iHAS124 B, AL0N, max UDMA/100
ata4.00: configured for UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA WDC WD10EALX-089 15.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM ATAPI iHAS124 B AL0N PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
sd 1:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=046d, idProduct=c31c
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer: Logitech
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/input/input2
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.1/input/input3
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
usb 1-1.2: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 3392.296 MHz
usb 1-1.2: New USB device found, idVendor=1058, idProduct=1140
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-1.2: Product: My Book 1140
usb 1-1.2: Manufacturer: Western Digital
usb 1-1.2: SerialNumber: 5743415A4138343535353034
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi6 : usb-storage 1-1.2:1.0
usbcore: registered new interface driver usb-storage
usb 1-1.5: new high-speed USB device number 4 using ehci-pci
usb 1-1.5: New USB device found, idVendor=11b0, idProduct=6148
usb 1-1.5: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 1-1.5: Product: FCR-HS219/1 Mobile Reader
usb 1-1.5: Manufacturer: Kingston
usb 1-1.5: SerialNumber: 113001005689
usb-storage 1-1.5:1.0: USB Mass Storage device detected
scsi7 : usb-storage 1-1.5:1.0
usb 2-1.4: new full-speed USB device number 3 using ehci-pci
usb 2-1.4: New USB device found, idVendor=046d, idProduct=c068
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: G500
usb 2-1.4: Manufacturer: Logitech
usb 2-1.4: SerialNumber: 56ECBE97640018
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
hid-generic 0003:046D:C068.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.4/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input5
hid-generic 0003:046D:C068.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.4/input1
Switched to clocksource tsc
scsi 6:0:0:0: Direct-Access WD My Book 1140 1003 PQ: 0 ANSI: 6
scsi 6:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: Attached scsi generic sg3 type 13
sd 6:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
ses 6:0:0:1: Attached Enclosure device
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
scsi 7:0:0:0: Direct-Access Kingston FCR-HS219/1 9745 PQ: 0 ANSI: 0
scsi 7:0:0:1: Direct-Access Kingston FCR-HS219/1 9745 PQ: 0 ANSI: 0
scsi 7:0:0:2: Direct-Access Kingston FCR-HS219/1 9745 PQ: 0 ANSI: 0
scsi 7:0:0:3: Direct-Access Kingston FCR-HS219/1 9745 PQ: 0 ANSI: 0
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 7:0:0:1: Attached scsi generic sg5 type 0
sd 7:0:0:2: Attached scsi generic sg6 type 0
sd 7:0:0:3: Attached scsi generic sg7 type 0
sd 7:0:0:0: [sdc] Attached SCSI removable disk
sd 7:0:0:1: [sdd] Attached SCSI removable disk
sd 7:0:0:2: [sde] Attached SCSI removable disk
sd 7:0:0:3: [sdf] Attached SCSI removable disk
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Adding 16752636k swap on /dev/sda5. Priority:-1 extents:1 across:16752636k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[353]: starting version 204
lp: driver loaded but no devices found
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 53 for MSI/MSI-X
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
SKU: Nid=0x1d sku_cfg=0x4006f601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000006
SKU: customization=0x000000f6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4006f601 for NID 0x1d
realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0892
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
type=1400 audit(1393294278.040:2): apparmor="STATUS" operation="profile_load" parent=410 profile="unconfined" name="/sbin/dhclient" pid=469 comm="apparmor_parser"
type=1400 audit(1393294278.040:3): apparmor="STATUS" operation="profile_load" parent=410 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=469 comm="apparmor_parser"
type=1400 audit(1393294278.040:4): apparmor="STATUS" operation="profile_load" parent=410 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=469 comm="apparmor_parser"
type=1400 audit(1393294278.040:5): apparmor="STATUS" operation="profile_replace" parent=410 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=469 comm="apparmor_parser"
type=1400 audit(1393294278.040:6): apparmor="STATUS" operation="profile_replace" parent=410 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=469 comm="apparmor_parser"
type=1400 audit(1393294278.040:7): apparmor="STATUS" operation="profile_replace" parent=410 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=469 comm="apparmor_parser"
gpio_ich: GPIO from 180 to 255 on gpio_ich
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x14
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
init: failsafe main process (758) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
type=1400 audit(1393294284.420:8): apparmor="STATUS" operation="profile_replace" parent=886 profile="unconfined" name="/sbin/dhclient" pid=891 comm="apparmor_parser"
type=1400 audit(1393294284.420:9): apparmor="STATUS" operation="profile_replace" parent=886 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=891 comm="apparmor_parser"
type=1400 audit(1393294284.420:10): apparmor="STATUS" operation="profile_replace" parent=886 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=891 comm="apparmor_parser"
type=1400 audit(1393294284.420:11): apparmor="STATUS" operation="profile_replace" parent=886 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=891 comm="apparmor_parser"
type=1400 audit(1393294284.420:12): apparmor="STATUS" operation="profile_replace" parent=886 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=891 comm="apparmor_parser"
type=1400 audit(1393294284.420:13): apparmor="STATUS" operation="profile_replace" parent=886 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=891 comm="apparmor_parser"
type=1400 audit(1393294284.424:14): apparmor="STATUS" operation="profile_load" parent=886 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=894 comm="apparmor_parser"
type=1400 audit(1393294284.424:15): apparmor="STATUS" operation="profile_load" parent=886 profile="unconfined" name="/usr/sbin/cupsd" pid=894 comm="apparmor_parser"
type=1400 audit(1393294284.424:16): apparmor="STATUS" operation="profile_replace" parent=886 profile="unconfined" name="/usr/sbin/cupsd" pid=894 comm="apparmor_parser"
type=1400 audit(1393294284.608:17): apparmor="STATUS" operation="profile_load" parent=886 profile="unconfined" name="/usr/sbin/tcpdump" pid=896 comm="apparmor_parser"
init: avahi-cups-reload main process (966) terminated with status 1
ppdev: user-space parallel port driver
e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: udev-fallback-graphics main process (1013) terminated with status 1
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x1cc offMax=0x11da
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (2811) terminated with status 1
usb 2-1.3: new full-speed USB device number 4 using ehci-pci
usb 2-1.3: New USB device found, idVendor=045e, idProduct=028e
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Controller
usb 2-1.3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 2-1.3: SerialNumber: 11CA4B6
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input17
usbcore: registered new interface driver xpad
usb 2-1.3: USB disconnect, device number 4
perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
init: anacron main process (6608) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
mei_me 0000:00:16.0: suspend
PM: suspend of devices complete after 837.964 msecs
PM: late suspend of devices complete after 0.128 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.746 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
smpboot: CPU 6 is now offline
Broke affinity for irq 16
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 128.135 msecs
PM: early resume of devices complete after 0.079 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata6: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8004.225 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
audit_printk_skb: 72 callbacks suppressed
type=1400 audit(1393347276.484:42): apparmor="STATUS" operation="profile_replace" parent=7591 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=7595 comm="apparmor_parser"
type=1400 audit(1393347276.484:43): apparmor="STATUS" operation="profile_replace" parent=7591 profile="unconfined" name="/usr/sbin/cupsd" pid=7595 comm="apparmor_parser"
type=1400 audit(1393347276.484:44): apparmor="STATUS" operation="profile_replace" parent=7591 profile="unconfined" name="/usr/sbin/cupsd" pid=7595 comm="apparmor_parser"
usb 2-1.3: new full-speed USB device number 5 using ehci-pci
usb 2-1.3: New USB device found, idVendor=045e, idProduct=028e
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Controller
usb 2-1.3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 2-1.3: SerialNumber: 11CA4B6
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input18
usb 2-1.3: USB disconnect, device number 5
usb 2-1.3: new full-speed USB device number 6 using ehci-pci
usb 2-1.3: New USB device found, idVendor=045e, idProduct=028e
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Controller
usb 2-1.3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 2-1.3: SerialNumber: 11CA4B6
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input19
usb 2-1.3: USB disconnect, device number 6
usb 2-1.3: new full-speed USB device number 7 using ehci-pci
usb 2-1.3: New USB device found, idVendor=045e, idProduct=028e
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Controller
usb 2-1.3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 2-1.3: SerialNumber: 11CA4B6
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input20
usb 2-1.3: USB disconnect, device number 7
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
mei_me 0000:00:16.0: suspend
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 879.897 msecs
PM: late suspend of devices complete after 0.129 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.784 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 51
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.995 msecs
PM: early resume of devices complete after 0.078 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: setting latency timer to 64
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8126.452 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
ex1[25790]: segfault at 11c9000 ip 00007feeaef3e418 sp 00007fffd01cc198 error 4 in libc-2.17.so[7feeaede8000+1bd000]
ex1[25927]: segfault at 1ecc000 ip 00007fcac4652422 sp 00007fff52201c38 error 4 in libc-2.17.so[7fcac44fc000+1bd000]
ex1[26013]: segfault at 21a5000 ip 00007f0d68520422 sp 00007fff6a31bdb8 error 4 in libc-2.17.so[7f0d683ca000+1bd000]
ex1[26126]: segfault at 26f9000 ip 00007fab4287042c sp 00007fff00a314a8 error 4 in libc-2.17.so[7fab4271a000+1bd000]
traps: ctest[27585] general protection ip:408e83 sp:7fffee37a900 error:0 in ctest[400000+17000]
traps: ctest[27619] general protection ip:408e93 sp:7fffc9a2a5f0 error:0 in ctest[400000+17000]
init: anacron main process (5827) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
mei_me 0000:00:16.0: suspend
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 841.446 msecs
PM: late suspend of devices complete after 0.128 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.742 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 51
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
smpboot: CPU 6 is now offline
Broke affinity for irq 16
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.948 msecs
PM: early resume of devices complete after 0.082 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8127.330 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
usb 2-1.3: new full-speed USB device number 8 using ehci-pci
usb 2-1.3: New USB device found, idVendor=045e, idProduct=028e
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Controller
usb 2-1.3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 2-1.3: SerialNumber: 11CA4B6
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input21
usb 2-1.3: USB disconnect, device number 8
init: anacron main process (14125) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
mei_me 0000:00:16.0: suspend
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 849.531 msecs
PM: late suspend of devices complete after 0.121 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.824 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 51
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
smpboot: CPU 6 is now offline
Broke affinity for irq 16
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.792 msecs
PM: early resume of devices complete after 0.080 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata3: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8017.989 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
usb 2-1.3: new full-speed USB device number 9 using ehci-pci
usb 2-1.3: New USB device found, idVendor=045e, idProduct=028e
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Controller
usb 2-1.3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 2-1.3: SerialNumber: 11CA4B6
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input22
usb 2-1.3: USB disconnect, device number 9
usb 2-1.3: new full-speed USB device number 10 using ehci-pci
usb 2-1.3: New USB device found, idVendor=045e, idProduct=028e
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Controller
usb 2-1.3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 2-1.3: SerialNumber: 11CA4B6
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input23
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
mei_me 0000:00:16.0: suspend
PM: suspend of devices complete after 827.967 msecs
PM: late suspend of devices complete after 0.133 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.783 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 51
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
smpboot: CPU 6 is now offline
Broke affinity for irq 16
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.950 msecs
PM: early resume of devices complete after 0.082 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
ehci-pci 0000:00:1d.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
usb 2-1.4: reset full-speed USB device number 3 using ehci-pci
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata6: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7975.511 msecs
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24
PM: Finishing wakeup.
Restarting tasks ... done.
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.060 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
mei_me 0000:00:16.0: suspend
PM: suspend of devices complete after 827.690 msecs
PM: late suspend of devices complete after 0.130 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.797 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 51
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.738 msecs
PM: early resume of devices complete after 0.081 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
usb 2-1.4: reset full-speed USB device number 3 using ehci-pci
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8068.289 msecs
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input25
PM: Finishing wakeup.
Restarting tasks ... done.
init: anacron main process (28320) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
mei_me 0000:00:16.0: suspend
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 905.287 msecs
PM: late suspend of devices complete after 0.130 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.738 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
Broke affinity for irq 51
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.834 msecs
PM: early resume of devices complete after 0.084 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
ehci-pci 0000:00:1d.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
usb 2-1.4: reset full-speed USB device number 3 using ehci-pci
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7971.471 msecs
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input26
PM: Finishing wakeup.
Restarting tasks ... done.
init: anacron main process (10500) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
mei_me 0000:00:16.0: suspend
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 843.325 msecs
PM: late suspend of devices complete after 0.130 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.734 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.965 msecs
PM: early resume of devices complete after 0.081 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8011.482 msecs
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input27
PM: Finishing wakeup.
Restarting tasks ... done.
SuperMeatBoy[669]: segfault at 8942 ip 000000000057cfb3 sp 00007fff44875dd0 error 4 in SuperMeatBoy[400000+216000]
Overgrowth.bin. (18792): /proc/18799/oom_adj is deprecated, please use /proc/18799/oom_score_adj instead.
usb 2-1.3: USB disconnect, device number 10
init: anacron main process (20717) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
mei_me 0000:00:16.0: suspend
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 868.769 msecs
PM: late suspend of devices complete after 0.129 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.739 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.611 msecs
PM: early resume of devices complete after 0.079 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: setting latency timer to 64
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8035.748 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
type=1400 audit(1394829876.456:45): apparmor="STATUS" operation="profile_replace" parent=22374 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=22378 comm="apparmor_parser"
type=1400 audit(1394829876.456:46): apparmor="STATUS" operation="profile_replace" parent=22374 profile="unconfined" name="/usr/sbin/cupsd" pid=22378 comm="apparmor_parser"
type=1400 audit(1394829876.456:47): apparmor="STATUS" operation="profile_replace" parent=22374 profile="unconfined" name="/usr/sbin/cupsd" pid=22378 comm="apparmor_parser"
usb 2-1.3: new full-speed USB device number 11 using ehci-pci
usb 2-1.3: New USB device found, idVendor=045e, idProduct=028e
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Controller
usb 2-1.3: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 2-1.3: SerialNumber: 11CA4B6
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28
init: anacron main process (32420) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
mei_me 0000:00:16.0: suspend
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 882.761 msecs
PM: late suspend of devices complete after 0.123 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.731 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 51
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
smpboot: CPU 6 is now offline
Broke affinity for irq 16
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.630 msecs
PM: early resume of devices complete after 0.083 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
usb 2-1.4: reset full-speed USB device number 3 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7995.716 msecs
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input29
PM: Finishing wakeup.
Restarting tasks ... done.
HDMI: invalid ELD data byte 16
HDMI: invalid ELD data byte 19
HDMI: invalid ELD data byte 27
HDMI: invalid ELD data byte 59
steam[20135]: segfault at 0 ip 00000000f71879b0 sp 00000000ffb00198 error 4 in libc-2.17.so[f7049000+1ae000]
usb 2-1.3: USB disconnect, device number 11
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
mei_me 0000:00:16.0: suspend
PM: suspend of devices complete after 832.107 msecs
PM: late suspend of devices complete after 0.131 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.826 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
Broke affinity for irq 51
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.656 msecs
PM: early resume of devices complete after 0.082 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8016.385 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
init: anacron main process (26682) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
mei_me 0000:00:16.0: suspend
PM: suspend of devices complete after 827.137 msecs
PM: late suspend of devices complete after 0.129 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.740 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.652 msecs
PM: early resume of devices complete after 0.079 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata6: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8126.495 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
init: anacron main process (23138) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
mei_me 0000:00:16.0: suspend
PM: suspend of devices complete after 825.769 msecs
PM: late suspend of devices complete after 0.121 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.784 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.734 msecs
PM: early resume of devices complete after 0.083 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7991.608 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
cinterpreter[29701]: segfault at 28 ip 0000000000404d5b sp 00007fff27e59b70 error 4 in cinterpreter[400000+6b000]
cinterpreter[29703]: segfault at 28 ip 0000000000404d5b sp 00007ffff50db960 error 4 in cinterpreter[400000+6b000]
cinterpreter[29705]: segfault at 28 ip 0000000000404d5b sp 00007fff0dadef60 error 4 in cinterpreter[400000+6b000]
cinterpreter[29707]: segfault at 28 ip 0000000000404d5b sp 00007ffff1f299f0 error 4 in cinterpreter[400000+6b000]
cinterpreter[29709]: segfault at 28 ip 0000000000404d5b sp 00007fffb4e352c0 error 4 in cinterpreter[400000+6b000]
cinterpreter[29711]: segfault at 28 ip 0000000000404d5b sp 00007fff2b556510 error 4 in cinterpreter[400000+6b000]
cinterpreter[29713]: segfault at 28 ip 0000000000404d5b sp 00007fff447614b0 error 4 in cinterpreter[400000+6b000]
cinterpreter[29715]: segfault at 28 ip 0000000000404d5b sp 00007fff9ef80950 error 4 in cinterpreter[400000+6b000]
cinterpreter[29717]: segfault at 28 ip 0000000000404d5b sp 00007fffb60cc0c0 error 4 in cinterpreter[400000+6b000]
show_signal_msg: 36 callbacks suppressed
cinterpreter[29849]: segfault at 28 ip 0000000000404d5b sp 00007fff31203b70 error 4 in cinterpreter[400000+6b000]
usb 2-1.3: new high-speed USB device number 12 using ehci-pci
usb 2-1.3: New USB device found, idVendor=1b1c, idProduct=1a10
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: UFD
usb 2-1.3: Manufacturer: Corsair
usb 2-1.3: SerialNumber: AA17300000000482
usb-storage 2-1.3:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-1.3:1.0
scsi 8:0:0:0: Direct-Access Corsair UFD 1100 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg8 type 0
sd 8:0:0:0: Embedded Enclosure Device
sd 8:0:0:0: Failed to get diagnostic page 0x8000002
sd 8:0:0:0: Failed to bind enclosure -19
sd 8:0:0:0: [sdg] 16187392 512-byte logical blocks: (8.28 GB/7.71 GiB)
sd 8:0:0:0: [sdg] Write Protect is off
sd 8:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 8:0:0:0: [sdg] No Caching mode page found
sd 8:0:0:0: [sdg] Assuming drive cache: write through
sd 8:0:0:0: [sdg] No Caching mode page found
sd 8:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
sd 8:0:0:0: [sdg] No Caching mode page found
sd 8:0:0:0: [sdg] Assuming drive cache: write through
sd 8:0:0:0: [sdg] Attached SCSI removable disk
catdoc[8537]: segfault at 9438fc8 ip 0000000000404255 sp 00007fffb52bf538 error 4 in catdoc[400000+9000]
catdoc[8544]: segfault at 96dbfc8 ip 0000000000404255 sp 00007fff309664a8 error 4 in catdoc[400000+9000]
catdoc[8549]: segfault at 891dfc8 ip 0000000000404255 sp 00007fffb84fb008 error 4 in catdoc[400000+9000]
catdoc[8554]: segfault at 9ccffc8 ip 0000000000404255 sp 00007fffed37f618 error 4 in catdoc[400000+9000]
catdoc[8559]: segfault at 9919fc8 ip 0000000000404255 sp 00007fff2307a448 error 4 in catdoc[400000+9000]
catdoc[8564]: segfault at 9427fc8 ip 0000000000404255 sp 00007ffff50579d8 error 4 in catdoc[400000+9000]
catdoc[8569]: segfault at 8c87fc8 ip 0000000000404255 sp 00007fff19effc88 error 4 in catdoc[400000+9000]
catdoc[8574]: segfault at 9a2cfc8 ip 0000000000404255 sp 00007fff953de0f8 error 4 in catdoc[400000+9000]
catdoc[8579]: segfault at 8b62fc8 ip 0000000000404255 sp 00007fffbd48f198 error 4 in catdoc[400000+9000]
sdg: detected capacity change from 8287944704 to 0
usb 2-1.3: USB disconnect, device number 12
init: anacron main process (9626) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
mei_me 0000:00:16.0: suspend
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 849.264 msecs
PM: late suspend of devices complete after 0.120 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.746 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
Broke affinity for irq 51
smpboot: CPU 6 is now offline
Broke affinity for irq 23
Broke affinity for irq 43
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.722 msecs
PM: early resume of devices complete after 0.080 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 7991.280 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
mei_me 0000:00:16.0: suspend
sd 1:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 844.091 msecs
PM: late suspend of devices complete after 0.129 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 79.737 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
Broke affinity for irq 51
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 127.951 msecs
PM: early resume of devices complete after 0.081 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
e1000e 0000:00:19.0: irq 53 for MSI/MSI-X
ehci-pci 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
sd 1:0:0:0: [sda] Starting disk
PM: resume of devices complete after 8082.800 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
caja[2307]: segfault at 8 ip 00007f969db8e103 sp 00007fff996addc0 error 6 in libglib-2.0.so.0.3800.1[7f969db2b000+fe000]