dmesg - mem2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.12-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.12.9-1 (2014-02-01)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000df7dffff] usable
BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7e1fff] ACPI NVS
BIOS-e820: [mem 0x00000000df7e2000-0x00000000df7effff] ACPI data
BIOS-e820: [mem 0x00000000df7f0000-0x00000000df7fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. P55-UD3/P55-UD3, BIOS F9 06/23/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x220000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask FE0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000f5660-0x000f566f] mapped at [c00f5660]
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37600000-0x377fffff]
[mem 0x37600000-0x377fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x375fffff]
[mem 0x34000000-0x375fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37800000-0x379fdfff]
[mem 0x37800000-0x379fdfff] page 4k
BRK [0x016cc000, 0x016ccfff] PGTABLE
BRK [0x016cd000, 0x016cefff] PGTABLE
RAMDISK: [mem 0x363ea000-0x371ecfff]
7814MB HIGHMEM available.
889MB LOWMEM available.
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
BRK [0x016cf000, 0x016cffff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x379fdfff]
HighMem [mem 0x379fe000-0x1fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xdf7dffff]
node 0: [mem 0x00000000-0x1fffffff]
On node 0 totalpages: 2094974
free_area_init_node: node 0, pgdat c1598900, node_mem_map f1fea020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 223742 pages, LIFO batch:31
HighMem zone: 15629 pages used for memmap
HighMem zone: 1867234 pages, LIFO batch:31
Using APIC driver default
SFI: Simple Firmware Interface v0.81
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
MPTABLE: OEM ID: OEM00000
MPTABLE: Product ID: PROD00000000
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #2
Processor #4
Processor #6
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
Processors: 4
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0xdf800000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f79b4000 s35648 r0 d21696 u57344
pcpu-alloc: s35648 r0 d21696 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2093194
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU0 microcode updated early to revision 0x7, date = 2013-08-20
Initializing CPU#0
Initializing HighMem for node 0 (000379fe:00220000)
Memory: 8287776K/8379896K available (4131K kernel code, 373K rwdata, 1264K rodata, 520K init, 580K bss, 92120K reserved, 7468936K highmem)
virtual kernel memory layout:
fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc15a5000 - 0xc1627000 ( 520 kB)
.data : 0xc1409078 - 0xc15a4680 (1645 kB)
.text : 0xc1000000 - 0xc1409078 (4132 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f7406000 soft=f7408000
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2719.895 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5439.79 BogoMIPS (lpj=10879580)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (c1627000 - c162c000)
Enabling APIC mode: Flat. Using 1 I/O APICs
smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f7492000 soft=f7494000
CPU1 microcode updated early to revision 0x7, date = 2013-08-20
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors # 1
CPU 2 irqstacks, hard=f7522000 soft=f7524000
CPU2 microcode updated early to revision 0x7, date = 2013-08-20
Initializing CPU#2
# 2
CPU 3 irqstacks, hard=f7552000 soft=f7554000
# 3 OK
CPU3 microcode updated early to revision 0x7, date = 2013-08-20
Initializing CPU#3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (21759.16 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdf7e0000-0xdf7e1fff] (8192 bytes)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xfb230, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Interpreter disabled.
vgaarb: loaded
PCI: Probing PCI hardware
PCI: root bus 00: using default resources
PCI: Probing PCI hardware (bus 00)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfbfff000-0xfbfff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.3: [8086:3b39] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xf900-0xf91f]
pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f]
pci 0000:00:1f.2: reg 0x24: [io 0xf300-0xf30f]
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffd000-0xfbffd0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf100-0xf107]
pci 0000:00:1f.5: reg 0x14: [io 0xf000-0xf003]
pci 0000:00:1f.5: reg 0x18: [io 0xef00-0xef07]
pci 0000:00:1f.5: reg 0x1c: [io 0xee00-0xee03]
pci 0000:00:1f.5: reg 0x20: [io 0xed00-0xed0f]
pci 0000:00:1f.5: reg 0x24: [io 0xec00-0xec0f]
pci 0000:01:00.0: [10de:0e22] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf7ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xec000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf9ffc000-0xf9ffffff]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
pci 0000:02:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
pci 0000:02:00.1: reg 0x10: [io 0xbf00-0xbf07]
pci 0000:02:00.1: reg 0x14: [io 0xbe00-0xbe03]
pci 0000:02:00.1: reg 0x18: [io 0xbd00-0xbd07]
pci 0000:02:00.1: reg 0x1c: [io 0xbc00-0xbc03]
pci 0000:02:00.1: reg 0x20: [io 0xbb00-0xbb0f]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xde00-0xdeff]
pci 0000:03:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdf7e0000-0xdfffffff]
Switched to clocksource refined-jiffies
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fb920
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb950, dseg 0xf0000
pnp 00:00: [irq 2]
pnp 00:00: [io 0x0020-0x0021]
pnp 00:00: [io 0x00a0-0x00a1]
pnp 00:00: Plug and Play BIOS device, IDs PNP0000 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f-0x0091]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play BIOS device, IDs PNP0200 (active)
pnp 00:02: [irq 0]
pnp 00:02: [io 0x0040-0x0043]
pnp 00:02: Plug and Play BIOS device, IDs PNP0100 (active)
pnp 00:03: [irq 8]
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: Plug and Play BIOS device, IDs PNP0b00 (active)
pnp 00:04: [irq 1]
pnp 00:04: [io 0x0060]
pnp 00:04: [io 0x0064]
pnp 00:04: Plug and Play BIOS device, IDs PNP0303 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play BIOS device, IDs PNP0800 (active)
pnp 00:06: [irq 13]
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: Plug and Play BIOS device, IDs PNP0c04 (active)
pnp 00:07: [mem 0x00000000-0x0009ffff]
pnp 00:07: [mem 0xffffffffffb00000-0xffffffffffb7ffff]
pnp 00:07: [mem 0xfffffffffff00000-0xffffffffffffffff]
pnp 00:07: [mem 0xfffffffffec00000-0xfffffffffec0ffff]
pnp 00:07: [mem 0xfffffffffee00000-0xfffffffffee0ffff]
pnp 00:07: [mem 0x00100000-0xffffffffdf7fffff disabled]
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0xffffffffffb00000-0xffffffffffb7ffff] could not be reserved
system 00:07: [mem 0xfffffffffff00000-0xffffffffffffffff] could not be reserved
system 00:07: [mem 0xfffffffffec00000-0xfffffffffec0ffff] could not be reserved
system 00:07: [mem 0xfffffffffee00000-0xfffffffffee0ffff] could not be reserved
system 00:07: Plug and Play BIOS device, IDs PNP0c01 (active)
pnp 00:08: [mem 0x000f0000-0x000f3fff]
pnp 00:08: [mem 0x000f4000-0x000f7fff]
pnp 00:08: [mem 0x000f8000-0x000fffff]
pnp 00:08: [mem 0x000cda00-0x000cffff]
system 00:08: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:08: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:08: [mem 0x000f8000-0x000fffff] could not be reserved
system 00:08: [mem 0x000cda00-0x000cffff] has been reserved
system 00:08: Plug and Play BIOS device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0290-0x029f]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [io 0x0cf8-0x0cff]
pnp 00:09: [io 0x0400-0x04bf]
pnp 00:09: Plug and Play BIOS device, IDs PNP0a03 (active)
pnp 00:0b: [irq 4]
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: Plug and Play BIOS device, IDs PNP0501 (active)
pnp 00:0d: [irq 7]
pnp 00:0d: [io 0x0378-0x037f]
pnp 00:0d: [io 0x0778-0x077f]
pnp 00:0d: Plug and Play BIOS device, IDs PNP0400 (active)
PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe807ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:02: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14348K (f63ea000 - f71ed000)
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1395177057.484:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1627
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one day, 114 bytes nvram
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
Using IPI No-Shortcut mode
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2014-03-18 21:10:58 UTC (1395177058)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 520K (c15a5000 - c1627000)
Write protecting the kernel text: 4136k
Write protecting the kernel read-only data: 1268k
NX-protecting the kernel data: 4056k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
systemd-udevd[71]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
r8169 0000:03:00.0: irq 40 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xf8202000, 6c:f0:49:00:48:14, XID 083000c0 IRQ 40
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 2
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
ehci-pci 0000:00:1a.7: irq 9, io mem 0xfbfff000
libata version 3.00 loaded.
ahci 0000:02:00.0: version 3.0
pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12-1-686-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 2
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 3, io mem 0xfbffe000
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 10
ata2: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 10
pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:02:00.1: can't find IRQ for PCI INT B; please try using pci=biosirq
pata_jmicron 0000:02:00.1: setting latency timer to 64
scsi2 : pata_jmicron
scsi3 : pata_jmicron
ata3: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00
ata4: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.12-1-686-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 10, io base 0x0000ff00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.12-1-686-pae uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 6, io base 0x0000fe00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.12-1-686-pae uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 9, io base 0x0000fd00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.12-1-686-pae uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 3, io base 0x0000fc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.12-1-686-pae uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000fb00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.12-1-686-pae uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000fa00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.12-1-686-pae uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.3: irq 10, io base 0x0000f900
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 3.12-1-686-pae uhci_hcd
usb usb9: SerialNumber: 0000:00:1d.3
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 11
ata6: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 11
ata_piix 0000:00:1f.5: MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi6 : ata_piix
scsi7 : ata_piix
ata7: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 11
ata8: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 11
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
usb 2-8: new high-speed USB device number 3 using ehci-pci
usb 2-8: New USB device found, idVendor=0424, idProduct=2514
usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-8:1.0: USB hub found
hub 2-8:1.0: 3 ports detected
ata6.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.01: SATA link down (SStatus 0 SControl 300)
ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.01: SATA link down (SStatus 0 SControl 300)
ata5.00: HPA detected: current 976771055, native 976773168
ata5.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
ata5.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 4:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 5:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
usb 8-1: new full-speed USB device number 2 using uhci_hcd
usb 8-1: New USB device found, idVendor=046d, idProduct=c52b
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB Receiver
usb 8-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input2
input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/input/input1
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1d.2-1:1
usb 2-8.1: new high-speed USB device number 4 using ehci-pci
usb 2-8.1: New USB device found, idVendor=0424, idProduct=2640
usb 2-8.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-8.1:1.0: USB hub found
hub 2-8.1:1.0: 3 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Hibernation image partition 8:21 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-8.1.1: new high-speed USB device number 5 using ehci-pci
usb 2-8.1.1: New USB device found, idVendor=0424, idProduct=4060
usb 2-8.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-8.1.1: Product: Ultra Fast Media Reader
usb 2-8.1.1: Manufacturer: Generic
usb 2-8.1.1: SerialNumber: 000000264001
usb 2-8.1.2: new full-speed USB device number 6 using ehci-pci
usb 2-8.1.2: New USB device found, idVendor=2687, idProduct=fb01
usb 2-8.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-8.1.2: Product: Fitbit Base Station
usb 2-8.1.2: Manufacturer: Fitbit Inc.
usb 2-8.1.2: SerialNumber: \xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf
systemd-udevd[374]: starting version 204
input: PC Speaker as /devices/platform/pcspkr/input/input2
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
hid-generic 0003:2687:FB01.0005: hiddev0,hidraw2: USB HID v1.11 Device [Fitbit Inc. Fitbit Base Station] on usb-0000:00:1d.7-8.1.2/input0
hid-generic 0003:2687:FB01.0006: hiddev0,hidraw3: USB HID v1.11 Device [Fitbit Inc. Fitbit Base Station] on usb-0000:00:1d.7-8.1.2/input1
ACPI Exception: AE_BAD_PARAMETER, Thread 4152100032 could not acquire Mutex [0x1] (20130725/utmutex-285)
ACPI Exception: AE_BAD_PARAMETER, Thread 4152100032 could not acquire Mutex [0x1] (20130725/utmutex-285)
ACPI Exception: AE_BAD_PARAMETER, Thread 4152100032 could not acquire Mutex [0x1] (20130725/utmutex-285)
ACPI Exception: AE_BAD_PARAMETER, Thread 4152100032 could not acquire Mutex [0x1] (20130725/utmutex-285)
ACPI Exception: AE_BAD_PARAMETER, Thread 4144902720 could not acquire Mutex [0x1] (20130725/utmutex-285)
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[drm] Initialized drm 1.1.0 20060810
usb-storage 2-8.1.1:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-8.1.1:1.0
usbcore: registered new interface driver usb-storage
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
pcieport 0000:00:03.0: driver skip pci_set_master, fix it!
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86 Kernel Module 334.16 Tue Feb 4 13:55:39 PST 2014
snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
spurious 8259A interrupt: IRQ7.
scsi 8:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
Adding 4194300k swap on /dev/sdb5. Priority:-1 extents:1 across:4194300k
EXT4-fs (sdb2): re-mounted. Opts: (null)
EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:0d: reported by Plug and Play BIOS
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
fuse init (API version 7.22)
loop: module loaded
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x228 offMax=0x969
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.6_Debian (interface 0x001a0007).
vboxpci: IOMMU not found (not compiled)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168d-2.fw
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
NVRM: failed to register with the ACPI subsystem!
nvidia 0000:01:00.0: irq 42 for MSI/MSI-X
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
CPU3: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged