dmesg - memorytesteps
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.1.2.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu Dec 12 13:59:19 CST 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfe0ac00 (usable)
BIOS-e820: 00000000dfe0ac00 - 00000000dfe0cc00 (ACPI NVS)
BIOS-e820: 00000000dfe0ec00 - 00000000dfe5cc00 (reserved)
BIOS-e820: 00000000dfe5cc00 - 00000000dfe5ec00 (ACPI data)
BIOS-e820: 00000000dfe5ec00 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000011c000000 (usable)
DMI 2.3 present.
SMBIOS version 2.3 @ 0xF0430
DMI: Dell Inc. Precision WorkStation 390 /0DN075, BIOS 2.6.0 05/19/2008
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x11c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 000000000 write-back
1 base 0DFF00000 mask FFFF00000 uncachable
2 base 0E0000000 mask FE0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 3583MB, range: 1MB, type UC
reg 2, base: 3584MB, range: 512MB, type UC
total RAM covered: 65023M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3583MB, range: 1MB, type UC
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 32GB, type WB
e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdfe0a max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000dfe0a000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfe0a000 page 4k
kernel direct mapping tables up to dfe0a000 @ 8000-e000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000011c000000
0100000000 - 011c000000 page 2M
kernel direct mapping tables up to 11c000000 @ c000-e000
RAMDISK: 372ae000 - 37fefd8c
ACPI: RSDP 00000000000febf0 00024 (v02 DELL )
ACPI: XSDT 00000000000fcedc 00084 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: FACP 00000000000fd004 000F4 (v03 DELL B8K 00000015 ASL 00000061)
ACPI: DSDT 00000000fff53074 036E3 (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 00000000dfe0ac00 00040
ACPI: SSDT 00000000fff56878 000AC (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fd0f8 00092 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: BOOT 00000000000fd18a 00028 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: ASF! 00000000000fd1b2 00092 (v32 DELL B8K 00000015 ASL 00000061)
ACPI: MCFG 00000000000fd244 0003E (v01 DELL B8K 00000015 ASL 00000061)
ACPI: HPET 00000000000fd282 00038 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: TCPA 00000000000fd4de 00032 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: SLIC 00000000000fd2ba 00176 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: SSDT 00000000dfe0ac40 0023B (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
ACPI: SSDT 00000000dfe0b049 0023B (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
ACPI: SSDT 00000000dfe0b452 00140 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000011c000000
Bootmem setup node 0 0000000000000000-000000011c000000
NODE_DATA [000000000000d000 - 0000000000040fff]
bootmap [0000000000041000 - 00000000000647ff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 011c000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 - 000201faa4]
#3 [00372ae000 - 0037fefd8c] RAMDISK ==> [00372ae000 - 0037fefd8c]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0002020000 - 0002020198] BRK ==> [0002020000 - 0002020198]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
found SMP MP-table at [ffff8800000fe710] fe710
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0011c000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000dfe0a
0: 0x00100000 -> 0x0011c000
On node 0 totalpages: 1031592
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3838 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 898626 pages, LIFO batch:31
Normal zone: 1568 pages used for memmap
Normal zone: 113120 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfe0a000 - 00000000dfe0b000
PM: Registered nosave memory: 00000000dfe0b000 - 00000000dfe0c000
PM: Registered nosave memory: 00000000dfe0c000 - 00000000dfe0f000
PM: Registered nosave memory: 00000000dfe0f000 - 00000000dfe5c000
PM: Registered nosave memory: 00000000dfe5c000 - 00000000dfe5d000
PM: Registered nosave memory: 00000000dfe5d000 - 00000000dfe5e000
PM: Registered nosave memory: 00000000dfe5e000 - 00000000dfe5f000
PM: Registered nosave memory: 00000000dfe5f000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1015584
Policy zone: Normal
audit: enabled (after initialization)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3969328k/4653056k available (5325k kernel code, 526688k absent, 157040k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2660.178 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.35 BogoMIPS (lpj=2660178)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz stepping 06
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (10640.71 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at dfe0ac00 (8192 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 88 (20090903/tbutils-314)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A03:00: host bridge window [mem 0xf4000000-0xfec00000]
pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xefffffff]
pci_root PNP0A03:00: host bridge window [mem 0xff980800-0xff980bff]
pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfec00000]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0xff980800-0xff980bff]
pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
pci 0000:00:1d.3: reg 20: [io 0xff20-0xff3f]
pci 0000:00:1d.7: reg 10: [mem 0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfecf]
pci 0000:00:1f.2: reg 24: [mem 0xff970000-0xff9703ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff]
pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfd000000-0xfdffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xfbf00000-0xfbf1ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfbf00000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xfbdf0000-0xfbdfffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:02.0: reg 10: [mem 0xfbbc0000-0xfbbdffff]
pci 0000:05:02.0: reg 14: [mem 0xfbbe0000-0xfbbfffff]
pci 0000:05:02.0: reg 18: [io 0xdce0-0xdcff]
pci 0000:05:02.0: reg 30: [mem 0xfbc00000-0xfbc1ffff pref]
pci 0000:05:02.0: PME# supported from D0 D3hot D3cold
pci 0000:05:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbcfffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfec00000] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xefffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff980800-0xff980bff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9703ff]
pci 0000:00:1f.2: can't reserve [mem 0xff970000-0xff9703ff]
Expanded resource reserved due to conflict with PCI Bus 0000:00
Expanded resource reserved due to conflict with PCI Bus 0000:00
lo: Dropping TSO features since no CSUM feature.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0060]
pnp 00:01: [io 0x0064]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x0800-0x085f]
pnp 00:01: [io 0x0c00-0x0c7f]
pnp 00:01: [io 0x0860-0x08ff]
pnp 00:01: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:01: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0080-0x009f]
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x0070-0x007f]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x03f0-0x03f5]
pnp 00:06: [io 0x03f7]
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [io 0x0378-0x037f]
pnp 00:07: [io 0x0778-0x077f]
pnp 00:07: [irq 7]
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x00100000-0x00ffffff]
pnp 00:09: [mem 0x01000000-0xdfe0abff]
pnp 00:09: [mem 0x000f0000-0x000fffff]
pnp 00:09: [mem 0x000c0000-0x000cffff]
pnp 00:09: [mem 0xfec00000-0xfecfffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xffb00000-0xffbfffff]
pnp 00:09: [mem 0xffc00000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
pnp 00:0a: [mem 0xfeda0000-0xfedacfff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0c00-0x0c7f] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0x00ffffff] could not be reserved
system 00:09: [mem 0x01000000-0xdfe0abff] could not be reserved
system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:09: [mem 0xffc00000-0xffffffff] has been reserved
system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0a: [mem 0xfeda0000-0xfedacfff] has been reserved
pci 0000:05:02.0: address space collision: [mem 0xfbc00000-0xfbc1ffff pref] conflicts with PCI Bus 0000:05 [mem 0xfbb00000-0xfbcfffff]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1e.0: BAR 15: assigned [mem 0xf4000000-0xf40fffff pref]
pci 0000:00:1f.2: BAR 5: assigned [mem 0xf4100000-0xf41003ff]
pci 0000:00:1f.2: BAR 5: set to [mem 0xf4100000-0xf41003ff] (PCI address [0xf4100000-0xf41003ff]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.5: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xf4400000-0xf45fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref]
pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4800000-0xf49fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xfbf00000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.0: bridge window [mem 0xf4800000-0xf49fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xf4400000-0xf45fffff]
pci 0000:00:1c.4: bridge window [mem 0xf4600000-0xf47fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.5: bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:05:02.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbcfffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf40fffff pref]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0xf4000000-0xfec00000]
pci_bus 0000:00: resource 10 [mem 0xdff00000-0xefffffff]
pci_bus 0000:00: resource 11 [mem 0xff980800-0xff980bff]
pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 2 [mem 0xf4800000-0xf49fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xf4400000-0xf45fffff]
pci_bus 0000:03: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:05: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:05: resource 9 [mem 0xf4000000-0xfec00000]
pci_bus 0000:05: resource 10 [mem 0xdff00000-0xefffffff]
pci_bus 0000:05: resource 11 [mem 0xff980800-0xff980bff]
pci_bus 0000:05: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:05: resource 13 [mem 0xfed20000-0xfed9ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.0: PCI INT A disabled
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.1: PCI INT B disabled
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13575k freed
Simple Boot Flag at 0x7a set to 0x80
audit: initializing netlink socket (enabled)
type=2000 audit(1392433902.885:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7779
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 88C0C2211C139FF0
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
IPMI System Interface driver.
Refined TSC clocksource calibration: 2660.141 MHz.
ipmi_si: Adding default-specified kcs state machine
Switching to clocksource tsc
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xff980800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.1.2.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.1.2.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.1.2.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.1.2.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.1.2.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
hpet1: lost 2 rtc interrupts
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-02-15 03:12:04 UTC (1392433924)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata2: port disabled. ignoring.
ata1.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H53N, B104, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H53N B104 PQ: 0 ANSI: 5
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28
ata4: SATA max UDMA/133 abar m1024@0xf4100000 port 0xf4100180 irq 28
ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28
ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: Maxtor 6Y080M0, YAR512W0, max UDMA/100
ata3.00: 156301488 sectors, multi 8: LBA48
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
ata5.00: ATA-7: SAMSUNG HD161HJ, JF100-22, max UDMA7
ata5.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
ata6.00: ATA-7: ST3160812AS, 3.ADJ, max UDMA/133
ata6.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3160812AS 3.AD PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 4:0:0:0: [sdb] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 5:0:0:0: [sdc] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:0:0: [sdb] Attached SCSI disk
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sd 5:0:0:0: [sdc] Attached SCSI disk
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 2034668
ext3_orphan_cleanup: deleting unreferenced inode 2033629
ext3_orphan_cleanup: deleting unreferenced inode 2033633
ext3_orphan_cleanup: deleting unreferenced inode 2359355
ext3_orphan_cleanup: deleting unreferenced inode 2033653
ext3_orphan_cleanup: deleting unreferenced inode 2034387
ext3_orphan_cleanup: deleting unreferenced inode 2032935
ext3_orphan_cleanup: deleting unreferenced inode 2033888
ext3_orphan_cleanup: deleting unreferenced inode 2034462
ext3_orphan_cleanup: deleting unreferenced inode 2034452
ext3_orphan_cleanup: deleting unreferenced inode 2034460
ext3_orphan_cleanup: deleting unreferenced inode 2057770
ext3_orphan_cleanup: deleting unreferenced inode 2032465
ext3_orphan_cleanup: deleting unreferenced inode 2034383
ext3_orphan_cleanup: deleting unreferenced inode 2034381
ext3_orphan_cleanup: deleting unreferenced inode 2033652
ext3_orphan_cleanup: deleting unreferenced inode 2034458
ext3_orphan_cleanup: deleting unreferenced inode 2033352
ext3_orphan_cleanup: deleting unreferenced inode 2056526
ext3_orphan_cleanup: deleting unreferenced inode 2057052
ext3_orphan_cleanup: deleting unreferenced inode 2033338
ext3_orphan_cleanup: deleting unreferenced inode 2033753
ext3_orphan_cleanup: deleting unreferenced inode 2056504
ext3_orphan_cleanup: deleting unreferenced inode 2056938
ext3_orphan_cleanup: deleting unreferenced inode 2033308
ext3_orphan_cleanup: deleting unreferenced inode 2033004
ext3_orphan_cleanup: deleting unreferenced inode 2056885
ext3_orphan_cleanup: deleting unreferenced inode 2032687
ext3_orphan_cleanup: deleting unreferenced inode 2033263
ext3_orphan_cleanup: deleting unreferenced inode 2056588
ext3_orphan_cleanup: deleting unreferenced inode 2034385
ext3_orphan_cleanup: deleting unreferenced inode 2057608
ext3_orphan_cleanup: deleting unreferenced inode 2057647
ext3_orphan_cleanup: deleting unreferenced inode 2057500
ext3_orphan_cleanup: deleting unreferenced inode 2056595
ext3_orphan_cleanup: deleting unreferenced inode 2056883
ext3_orphan_cleanup: deleting unreferenced inode 2057575
ext3_orphan_cleanup: deleting unreferenced inode 2057577
ext3_orphan_cleanup: deleting unreferenced inode 2057571
ext3_orphan_cleanup: deleting unreferenced inode 2033316
ext3_orphan_cleanup: deleting unreferenced inode 2056589
ext3_orphan_cleanup: deleting unreferenced inode 2056594
ext3_orphan_cleanup: deleting unreferenced inode 2033320
ext3_orphan_cleanup: deleting unreferenced inode 2056194
ext3_orphan_cleanup: deleting unreferenced inode 2032694
ext3_orphan_cleanup: deleting unreferenced inode 2032928
ext3_orphan_cleanup: deleting unreferenced inode 2056581
ext3_orphan_cleanup: deleting unreferenced inode 2032947
ext3_orphan_cleanup: deleting unreferenced inode 2056932
ext3_orphan_cleanup: deleting unreferenced inode 2034503
ext3_orphan_cleanup: deleting unreferenced inode 2032554
ext3_orphan_cleanup: deleting unreferenced inode 2056608
ext3_orphan_cleanup: deleting unreferenced inode 2056607
ext3_orphan_cleanup: deleting unreferenced inode 2056606
ext3_orphan_cleanup: deleting unreferenced inode 2056522
ext3_orphan_cleanup: deleting unreferenced inode 2034454
ext3_orphan_cleanup: deleting unreferenced inode 2033306
ext3_orphan_cleanup: deleting unreferenced inode 2057581
ext3_orphan_cleanup: deleting unreferenced inode 2057587
ext3_orphan_cleanup: deleting unreferenced inode 2056610
ext3_orphan_cleanup: deleting unreferenced inode 2057585
ext3_orphan_cleanup: deleting unreferenced inode 2057589
ext3_orphan_cleanup: deleting unreferenced inode 2056596
ext3_orphan_cleanup: deleting unreferenced inode 2056520
ext3_orphan_cleanup: deleting unreferenced inode 2057579
ext3_orphan_cleanup: deleting unreferenced inode 2034456
ext3_orphan_cleanup: deleting unreferenced inode 2033203
ext3_orphan_cleanup: deleting unreferenced inode 2056557
ext3_orphan_cleanup: deleting unreferenced inode 2056554
ext3_orphan_cleanup: deleting unreferenced inode 2056502
ext3_orphan_cleanup: deleting unreferenced inode 2056563
ext3_orphan_cleanup: deleting unreferenced inode 2056500
ext3_orphan_cleanup: deleting unreferenced inode 2056613
ext3_orphan_cleanup: deleting unreferenced inode 2035843
ext3_orphan_cleanup: deleting unreferenced inode 2056518
ext3_orphan_cleanup: deleting unreferenced inode 2056494
ext3_orphan_cleanup: deleting unreferenced inode 2056487
EXT3-fs (sda1): 77 orphan inodes deleted
EXT3-fs (sda1): recovery complete
EXT3-fs (sda1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda1
dracut: Switching root
udev: starting version 147
EDAC MC: Ver: 2.1.0 Dec 12 2013
EDAC MC0: Giving out device to 'i82975x_edac' 'i82975x': DEV (null)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.132 (May 21, 2013)
tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:04:00.0: setting latency timer to 64
tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:1d:09:13:92:cb
tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI: resource (null) [io 0x0828-0x082f] conflicts with ACPI region GLBC [io 0x828-0x82d]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: Attached scsi generic sg3 type 0
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000 0000:05:02.0: eth1: (PCI:33MHz:32-bit) 00:02:b3:d4:f0:65
e1000 0000:05:02.0: eth1: Intel(R) PRO/1000 Network Connection
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
platform microcode: firmware: requesting intel-ucode/06-0f-06
microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
platform microcode: firmware: requesting intel-ucode/06-0f-06
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0xd0, date = 2010-09-30
microcode: CPU1 updated to revision 0xd0, date = 2010-09-30
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
EXT3-fs (sda1): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda3): using internal journal
EXT3-fs (sda3): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda4): using internal journal
EXT3-fs (sda4): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
Adding 4194808k swap on /dev/sda2. Priority:-1 extents:1 across:4194808k
type=1127 audit(1392433952.301:2): user pid=881 uid=0 auid=4294967295 ses=4294967295 msg='init exe="/sbin/telinit" hostname=? addr=? terminal=console res=success'
type=1129 audit(1392433952.472:3): user pid=881 uid=0 auid=4294967295 ses=4294967295 msg='old-level=N new-level=3 exe="/sbin/telinit" hostname=? addr=? terminal=console res=success'
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 29 for MSI/MSI-X
tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is off for TX and off for RX
type=1305 audit(1392433971.487:4): audit_pid=2624 old=0 auid=4294967295 ses=4294967295 res=1
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
NVRM: The NVIDIA Quadro NVS 285 GPU installed in this system is
NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
NVRM: visit for more
NVRM: information. The 319.60 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
NVRM: No NVIDIA graphics adapter found!
Switching to clocksource hpet
input: PC Speaker as /devices/platform/pcspkr/input/input3
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
ipmi device interface
enabling dynamically allocated vcaches
Starting AFS cache scan...found 14877 non-empty cache files (6%).
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.