dmesg - z-disk
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.5.1.el6.centos.plus.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Tue Feb 11 21:21:23 UTC 2014
Command line: ro root=/dev/mapper/vg_zodiac-lv_zodiac rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_zodiac/lv_zodiac KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM vga=791
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
BIOS-e820: 00000000cff8e000 - 00000000cff90000 type 9
BIOS-e820: 00000000cff90000 - 00000000cffa2000 (ACPI data)
BIOS-e820: 00000000cffa2000 - 00000000cffe0000 (ACPI NVS)
BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000102e000000 (usable)
DMI present.
SMBIOS version 2.6 @ 0xFBB80
DMI: ASUSTeK Computer INC. KGP(M)E-D16/KGP(M)E-D16, BIOS 3201 02/19/2013
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x102e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000102e000000 aka 66272M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcff80 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cff80000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfe00000 page 2M
00cfe00000 - 00cff80000 page 4k
kernel direct mapping tables up to cff80000 @ 10000-13000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000102e000000
0100000000 - 1000000000 page 1G
1000000000 - 102e000000 page 2M
kernel direct mapping tables up to 102e000000 @ 12000-14000
RAMDISK: 36ede000 - 37fef42e
ACPI: RSDP 00000000000facc0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cff90100 00094 (v01 021913 XSDT1006 20130219 MSFT 00000097)
ACPI: FACP 00000000cff90290 000F4 (v03 021913 FACP1006 20130219 MSFT 00000097)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-561)
ACPI: DSDT 00000000cff90580 06083 (v01 S0100 S0100000 00000000 INTL 20060113)
ACPI: FACS 00000000cffa2000 00040
ACPI: APIC 00000000cff90390 0015E (v01 021913 APIC1006 20130219 MSFT 00000097)
ACPI: MCFG 00000000cff904f0 0003C (v01 021913 OEMMCFG 20130219 MSFT 00000097)
ACPI: SPMI 00000000cff90530 00041 (v05 021913 OEMSPMI 20130219 MSFT 00000097)
ACPI: OEMB 00000000cffa2040 0007B (v01 021913 OEMB1006 20130219 MSFT 00000097)
ACPI: HPET 00000000cff9a580 00038 (v01 021913 OEMHPET 20130219 MSFT 00000097)
ACPI: IVRS 00000000cff9a5c0 000E0 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: SRAT 00000000cff9a6a0 001A8 (v02 AMD AGESA 00000001 AMD 00000001)
ACPI: SLIT 00000000cff9a850 00030 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 00000000cff9a880 02CD4 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: EINJ 00000000cff9d560 00130 (v01 AMIER AMI_EINJ 20130219 MSFT 00000097)
ACPI: BERT 00000000cff9d6f0 00030 (v01 AMIER AMI_BERT 20130219 MSFT 00000097)
ACPI: ERST 00000000cff9d720 001B0 (v01 AMIER AMI_ERST 20130219 MSFT 00000097)
ACPI: HEST 00000000cff9d8d0 000A8 (v01 AMIER ABC_HEST 20130219 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 32 -> Node 0
SRAT: PXM 0 -> APIC 33 -> Node 0
SRAT: PXM 0 -> APIC 34 -> Node 0
SRAT: PXM 0 -> APIC 35 -> Node 0
SRAT: PXM 0 -> APIC 36 -> Node 0
SRAT: PXM 0 -> APIC 37 -> Node 0
SRAT: PXM 0 -> APIC 38 -> Node 0
SRAT: PXM 0 -> APIC 39 -> Node 0
SRAT: PXM 0 -> APIC 40 -> Node 0
SRAT: PXM 0 -> APIC 41 -> Node 0
SRAT: PXM 0 -> APIC 42 -> Node 0
SRAT: PXM 0 -> APIC 43 -> Node 0
SRAT: PXM 0 -> APIC 44 -> Node 0
SRAT: PXM 0 -> APIC 45 -> Node 0
SRAT: PXM 0 -> APIC 46 -> Node 0
SRAT: PXM 0 -> APIC 47 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-d0000000
SRAT: Node 0 PXM 0 100000000-102e000000
NUMA: Allocated memnodemap from 13040 - 33640
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-000000102e000000
NODE_DATA [0000000000033640 - 000000000006763f]
bootmap [0000000000100000 - 0000000000305bff] pages 206
(10 early reservations) ==> bootmem [0000000000 - 102e000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002024364] TEXT DATA BSS ==> [0001000000 - 0002024364]
#3 [0036ede000 - 0037fef42e] RAMDISK ==> [0036ede000 - 0037fef42e]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [0002025000 - 00020252f6] BRK ==> [0002025000 - 00020252f6]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
#8 [0000013000 - 0000013030] ACPI SLIT ==> [0000013000 - 0000013030]
#9 [0000013040 - 0000033640] MEMNODEMAP ==> [0000013040 - 0000033640]
found SMP MP-table at [ffff8800000ff780] ff780
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 66272MB)
[ffffea0000000000-ffffea000f1fffff] PMD -> [ffff880028600000-ffff880036dfffff] on node 0
[ffffea000f200000-ffffea0038bfffff] PMD -> [ffff880038000000-ffff8800619fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0102e000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000cff80
0: 0x00100000 -> 0x0102e000
On node 0 totalpages: 16768782
DMA zone: 56 pages used for memmap
DMA zone: 135 pages reserved
DMA zone: 3791 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833464 pages, LIFO batch:31
Normal zone: 217616 pages used for memmap
Normal zone: 15699440 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x98] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x99] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x9a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x9b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x9c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x9d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x9e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x9f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x30] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 48, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x31] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 49, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 32 CPUs, 16 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
PM: Registered nosave memory: 00000000cff8e000 - 00000000cff90000
PM: Registered nosave memory: 00000000cff90000 - 00000000cffa2000
PM: Registered nosave memory: 00000000cffa2000 - 00000000cffe0000
PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880061a00000 s94872 r8192 d23912 u131072
pcpu-alloc: s94872 r8192 d23912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16536695
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_zodiac-lv_zodiac rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_zodiac/lv_zodiac KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM vga=791
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 65920184k/67862528k available (5356k kernel code, 787400k absent, 1154944k reserved, 6985k data, 1284k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1208
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2500.095 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.19 BogoMIPS (lpj=2500095)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21899 entries in 86 pages
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Opteron(tm) Processor 6380 stepping 00
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
Brought up 16 CPUs
Total of 16 processors activated (80003.04 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at cffa2000 (253952 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1018)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 1f
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [OEMB] - 08, should be 05 (20090903/tbutils-314)
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 14: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 18: [io 0x7000-0x7007]
pci 0000:00:11.0: reg 1c: [io 0x6000-0x6003]
pci 0000:00:11.0: reg 20: [io 0x5000-0x500f]
pci 0000:00:11.0: reg 24: [mem 0xfbbfe400-0xfbbfe7ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: reg 10: [mem 0xfbbf6000-0xfbbf6fff]
pci 0000:00:12.1: reg 10: [mem 0xfbbf7000-0xfbbf7fff]
pci 0000:00:12.2: reg 10: [mem 0xfbbfe800-0xfbbfe8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfbbfc000-0xfbbfcfff]
pci 0000:00:13.1: reg 10: [mem 0xfbbfd000-0xfbbfdfff]
pci 0000:00:13.2: reg 10: [mem 0xfbbfec00-0xfbbfecff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.5: reg 10: [mem 0xfbbff000-0xfbbfffff]
pci 0000:06:00.0: reg 10: [mem 0xfbfe0000-0xfbffffff]
pci 0000:06:00.0: reg 18: [io 0xec00-0xec1f]
pci 0000:06:00.0: reg 1c: [mem 0xfbfdc000-0xfbfdffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 06-06]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xfbee0000-0xfbefffff]
pci 0000:05:00.0: reg 18: [io 0xdc00-0xdc1f]
pci 0000:05:00.0: reg 1c: [mem 0xfbedc000-0xfbedffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 18: [mem 0xfbdc0000-0xfbddffff 64bit]
pci 0000:04:00.0: reg 20: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 30: [mem 0xfbda0000-0xfbdbffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:04:00.1: supports D1 D2
pci 0000:00:0b.0: PCI bridge to [bus 04-04]
pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0b.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0d.0: PCI bridge to [bus 02-03]
pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:04.0: reg 10: [io 0xb800-0xb8ff]
pci 0000:03:04.0: supports D1 D2
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:02.0: reg 10: [mem 0xfbcfe000-0xfbcfefff]
pci 0000:01:02.0: supports D1 D2
pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:02.0: PME# disabled
pci 0000:01:03.0: reg 10: [io 0xa800-0xa8ff]
pci 0000:01:03.0: reg 14: [mem 0xfbcffc00-0xfbcffcff]
pci 0000:01:03.0: reg 30: [mem 0xfbcc0000-0xfbcdffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:03.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0xfec20000-0xfec200ff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [mem 0xf6000000-0xf6003fff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0081-0x0083]
pnp 00:03: [io 0x0087]
pnp 00:03: [io 0x0089-0x008b]
pnp 00:03: [io 0x008f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0290-0x029f]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0010-0x001f]
pnp 00:0a: [io 0x0022-0x003f]
pnp 00:0a: [io 0x0044-0x004d]
pnp 00:0a: [io 0x0050-0x005f]
pnp 00:0a: [io 0x0062-0x0063]
pnp 00:0a: [io 0x0065-0x006f]
pnp 00:0a: [io 0x0072-0x007f]
pnp 00:0a: [io 0x0080]
pnp 00:0a: [io 0x0084-0x0086]
pnp 00:0a: [io 0x0088]
pnp 00:0a: [io 0x008c-0x008e]
pnp 00:0a: [io 0x0090-0x009f]
pnp 00:0a: [io 0x00a2-0x00bf]
pnp 00:0a: [io 0x00b1]
pnp 00:0a: [io 0x00e0-0x00ef]
pnp 00:0a: [io 0x04d0-0x04d1]
pnp 00:0a: [io 0x040b]
pnp 00:0a: [io 0x04d6]
pnp 00:0a: [io 0x0550-0x0551]
pnp 00:0a: [io 0x0c00-0x0c01]
pnp 00:0a: [io 0x0c14]
pnp 00:0a: [io 0x0c50-0x0c51]
pnp 00:0a: [io 0x0c52]
pnp 00:0a: [io 0x0c6c]
pnp 00:0a: [io 0x0c6f]
pnp 00:0a: [io 0x0cd0-0x0cd1]
pnp 00:0a: [io 0x0cd2-0x0cd3]
pnp 00:0a: [io 0x0cd4-0x0cd5]
pnp 00:0a: [io 0x0cd6-0x0cd7]
pnp 00:0a: [io 0x0cd8-0x0cdf]
pnp 00:0a: [io 0x0800-0x089f]
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0b00-0x0b0f]
pnp 00:0a: [io 0x0b20-0x0b3f]
pnp 00:0a: [io 0x0900-0x090f]
pnp 00:0a: [io 0x0910-0x091f]
pnp 00:0a: [io 0xfe00-0xfefe]
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [mem 0xffb80000-0xffbfffff]
pnp 00:0a: [mem 0xfec10000-0xfec1001f]
pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
pnp 00:0a: [mem 0xfed40000-0xfed8ffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io 0x02f8-0x02ff]
pnp 00:0c: [irq 3]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [io 0x0ca2-0x0ca3]
pnp 00:0d: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:0e: [mem 0xe0000000-0xefffffff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0x00000000-0x0009ffff]
pnp 00:0f: [mem 0x000c0000-0x000cffff]
pnp 00:0f: [mem 0x000e0000-0x000fffff]
pnp 00:0f: [mem 0x00100000-0xcfffffff]
pnp 00:0f: [mem 0xfec00000-0xffffffff]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x040b] has been reserved
system 00:0a: [io 0x04d6] has been reserved
system 00:0a: [io 0x0550-0x0551] has been reserved
system 00:0a: [io 0x0c00-0x0c01] has been reserved
system 00:0a: [io 0x0c14] has been reserved
system 00:0a: [io 0x0c50-0x0c51] has been reserved
system 00:0a: [io 0x0c52] has been reserved
system 00:0a: [io 0x0c6c] has been reserved
system 00:0a: [io 0x0c6f] has been reserved
system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
system 00:0a: [io 0x0800-0x089f] has been reserved
system 00:0a: [io 0x0b00-0x0b0f] has been reserved
system 00:0a: [io 0x0b20-0x0b3f] has been reserved
system 00:0a: [io 0x0900-0x090f] has been reserved
system 00:0a: [io 0x0910-0x091f] has been reserved
system 00:0a: [io 0xfe00-0xfefe] has been reserved
system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:01:03.0: address space collision: [mem 0xfbcc0000-0xfbcdffff pref] conflicts with PCI Bus 0000:01 [mem 0xfbc00000-0xfbcfffff]
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:14.4: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:09.0: PCI bridge to [bus 06-06]
pci 0000:00:09.0: PCI bridge to [bus 06-06]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:0a.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 04-04]
pci 0000:00:0b.0: PCI bridge to [bus 04-04]
pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0b.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:00.0: bridge window [mem disabled]
pci 0000:02:00.0: bridge window [mem pref disabled]
pci 0000:00:0d.0: PCI bridge to [bus 02-03]
pci 0000:00:0d.0: PCI bridge to [bus 02-03]
pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0d.0: bridge window [mem disabled]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xf00fffff pref]
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
pci 0000:00:0d.0: setting latency timer to 64
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
pci 0000:02:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:02:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.1: PCI INT A disabled
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.1: PCI INT A disabled
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:04:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17477k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1393013427.425:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 2CAEC4FDF053C936
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90016e00000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:0d: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:0d: Found new BMC (man_id: 0x001043, prod_id: 0x0943, dev_id: 0x20)
ipmi_si 00:0d: IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
ERST: Failed to get Error Log Address Range.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbbfe800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.5.1.el6.centos.plus.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbbfec00
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.5.1.el6.centos.plus.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbbf6000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.5.1.el6.centos.plus.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbbf7000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.5.1.el6.centos.plus.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbbfc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.5.1.el6.centos.plus.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
Refined TSC clocksource calibration: 2499.998 MHz.
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbbfd000
Switching to clocksource tsc
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-431.5.1.el6.centos.plus.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbbff000
usb 1-2: new high speed USB device number 2 using ehci_hcd
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-431.5.1.el6.centos.plus.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2014-02-21 20:10:29 UTC (1393013429)
Initalizing network drop monitor service
Freeing unused kernel memory: 1284k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 768k freed
Freeing unused kernel memory: 1576k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
usb 1-2: New USB device found, idVendor=0409, idProduct=005a
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
usb 1-5: new high speed USB device number 3 using ehci_hcd
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:11.0: version 3.0
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
ata2: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
ata3: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
ata4: SATA max UDMA/133 abar m1024@0xfbbfe400 port 0xfbbfe680 irq 22
usb 1-5: New USB device found, idVendor=05e3, idProduct=0732
usb 1-5: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 1-5: Product: USB Reader
usb 1-5: Manufacturer: Genesys
usb 1-5: SerialNumber: 000000000677
usb 1-5: configuration #1 chosen from 1 choice
usb 2-3: new high speed USB device number 2 using ehci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-3: New USB device found, idVendor=046b, idProduct=ff01
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: Generic Hub
usb 2-3: Manufacturer: American Megatrends Inc.
usb 2-3: SerialNumber: serial
usb 2-3: configuration #1 chosen from 1 choice
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 3 ports detected
usb 6-1: new full speed USB device number 2 using ohci_hcd
usb 6-1: New USB device found, idVendor=0cf3, idProduct=3000
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 6-1: configuration #1 chosen from 1 choice
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata3.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-2.4: new full speed USB device number 4 using ehci_hcd
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 1-2.4: New USB device found, idVendor=0557, idProduct=8021
usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2.4: configuration #1 chosen from 1 choice
hub 1-2.4:1.0: USB hub found
hub 1-2.4:1.0: 4 ports detected
usb 2-3.1: new low speed USB device number 4 using ehci_hcd
ata5.00: ATAPI: HL-DT-ST BD-RE BH16NS40, 1.01, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS40 1.01 PQ: 0 ANSI: 5
usb 2-3.1: New USB device found, idVendor=046b, idProduct=ff10
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.1: Product: Virtual Keyboard and Mouse
usb 2-3.1: Manufacturer: American Megatrends Inc.
usb 2-3.1: SerialNumber: serial
usb 2-3.1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3.1/2-3.1:1.0/input/input3
generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:13.2-3.1/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3.1/2-3.1:1.1/input/input4
generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:13.2-3.1/input1
usb 1-2.4.1: new full speed USB device number 5 using ehci_hcd
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
firewire_ohci 0000:01:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
usb 1-2.4.1: New USB device found, idVendor=046d, idProduct=c31c
usb 1-2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4.1: Product: USB Keyboard
usb 1-2.4.1: Manufacturer: Logitech
usb 1-2.4.1: configuration #1 chosen from 1 choice
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.0/input/input5
generic-usb 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.2-2.4.1/input0
firewire_ohci: Added fw-ohci device 0000:01:02.0, OHCI version 1.0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.1/input/input6
generic-usb 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.2-2.4.1/input1
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 1:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 2:0:0:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sdc: sdc1 sdc2
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.2/input/input7
generic-usb 0003:046D:C31C.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Keyboard] on usb-0000:00:12.2-2.4.1/input2
sdb1 sdb2
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 1:0:0:0: [sdb] Attached SCSI disk
sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
dracut: Scanning devices sda2 sdb2 sdc2 for LVM logical volumes vg_zodiac/lv_zodiac
dracut: inactive '/dev/vg_zodiac/lv_zodiac' [1.37 TiB] inherit
firewire_core: created device fw0: GUID 001e8c0000e56bfc, S400
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_zodiac-lv_zodiac
dracut: Loading SELinux policy
type=1404 audit(1393013431.667:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277800 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1393013432.045:3): policy loaded auid=4294967295 ses=4294967295
dracut:
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
scsi 6:0:0:4: Direct-Access Generic STORAGE DEVICE 0551 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdd] Attached SCSI removable disk
sd 6:0:0:1: [sde] Attached SCSI removable disk
dracut: Switching root
sd 6:0:0:2: [sdf] Attached SCSI removable disk
sd 6:0:0:3: [sdg] Attached SCSI removable disk
sd 6:0:0:4: [sdh] Attached SCSI removable disk
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sr 4:0:0:0: Attached scsi generic sg3 type 5
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:1: Attached scsi generic sg5 type 0
sd 6:0:0:2: Attached scsi generic sg6 type 0
sd 6:0:0:3: Attached scsi generic sg7 type 0
sd 6:0:0:4: Attached scsi generic sg8 type 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20, revision 0
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 Feb 11 2014
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 8192MB 3: 8192MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 8192MB 3: 8192MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Registered DDR3 RAM
EDAC amd64: CS3: Registered DDR3 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 1).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 8192MB 3: 8192MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 8192MB 3: 8192MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Registered DDR3 RAM
EDAC amd64: CS3: Registered DDR3 RAM
EDAC MC1: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:19.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
e1000e 0000:06:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
e1000e 0000:06:00.0: setting latency timer to 64
e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
e1000e 0000:06:00.0: irq 56 for MSI/MSI-X
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
e1000e 0000:06:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
e1000e 0000:06:00.0: irq 58 for MSI/MSI-X
e1000e 0000:06:00.0: eth0: registered PHC clock
e1000e 0000:06:00.0: eth0: (PCI Express:2.5GT/s:Width x1) bc:ee:7b:2f:26:02
e1000e 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
alloc irq_desc for 47 on node -1
alloc kstat_irqs on node -1
e1000e 0000:05:00.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47
e1000e 0000:05:00.0: setting latency timer to 64
e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
e1000e 0000:05:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
e1000e 0000:05:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
e1000e 0000:05:00.0: irq 61 for MSI/MSI-X
e1000e 0000:05:00.0: eth1: registered PHC clock
e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) bc:ee:7b:2f:e1:96
e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 63171 MBytes.
[fglrx] vendor: 1002 device: 68c8 count: 1
[fglrx] ioport: bar 4, base 0xc000, size: 0x100
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pci 0000:04:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:04:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.15.3 [Sep 29 2013] with 1 minors
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:04:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33
hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:04:00.1: irq 62 for MSI/MSI-X
snd_hda_intel 0000:04:00.1: setting latency timer to 64
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:04:00.1/sound/card0/input8
CMI8788 0000:03:04.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
r8169 0000:01:03.0: (unregistered net_device): not PCI Express
r8169 0000:01:03.0: eth2: RTL8110s at 0xffffc90016db6c00, 00:1e:2a:3b:39:e8, XID 04000000 IRQ 22
r8169 0000:01:03.0: eth2: jumbo features [frames: 7152 bytes, tx checksumming: ok]
ipmi device interface
platform microcode: firmware: requesting amd-ucode/microcode_amd_fam15h.bin
microcode: CPU0: patch_level=0x600081c
microcode: CPU1: patch_level=0x600081c
microcode: CPU2: patch_level=0x600081c
microcode: CPU3: patch_level=0x600081c
microcode: CPU4: patch_level=0x600081c
microcode: CPU5: patch_level=0x600081c
microcode: CPU6: patch_level=0x600081c
microcode: CPU7: patch_level=0x600081c
microcode: CPU8: patch_level=0x600081c
microcode: CPU9: patch_level=0x600081c
microcode: CPU10: patch_level=0x600081c
microcode: CPU11: patch_level=0x600081c
microcode: CPU12: patch_level=0x600081c
microcode: CPU13: patch_level=0x600081c
microcode: CPU14: patch_level=0x600081c
microcode: CPU15: patch_level=0x600081c
Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev loop0, type iso9660), uses genfs_contexts
Adding 8388600k swap on /dev/sdb1. Priority:-1 extents:1 across:8388600k SSD
Adding 8388600k swap on /dev/sdc1. Priority:-2 extents:1 across:8388600k SSD
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
powernow-k8: Found 1 AMD Opteron(tm) Processor 6380 (16 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (2500 MHz)
powernow-k8: 1 : pstate 1 (2300 MHz)
powernow-k8: 2 : pstate 2 (2000 MHz)
powernow-k8: 3 : pstate 3 (1700 MHz)
powernow-k8: 4 : pstate 4 (1400 MHz)
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
8021q: adding VLAN 0 to HW filter on device eth0
ADDRCONF(NETDEV_UP): eth1: link is not ready
8021q: adding VLAN 0 to HW filter on device eth1
r8169 0000:01:03.0: eth2: link down
r8169 0000:01:03.0: eth2: link down
ADDRCONF(NETDEV_UP): eth2: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
NFS: Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
SELinux: initialized (dev 0:1d, type nfs), uses genfs_contexts
SELinux: initialized (dev 0:1e, type nfs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
8021q: adding VLAN 0 to HW filter on device virbr0
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 2(vnet0) entering forwarding state
device vnet1 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 3(vnet1) entering forwarding state
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
fglrx_pci 0000:04:00.0: irq 63 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 3055
[fglrx] Firegl kernel thread PID: 3056
[fglrx] Firegl kernel thread PID: 3057
[fglrx] IRQ 63 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
vnet0: no IPv6 routers present
kvm: 2884: cpu0 unhandled rdmsr: 0xc0010112
vnet1: no IPv6 routers present
fuse init (API version 7.13)
kvm: 2927: cpu0 unhandled rdmsr: 0xc0010112
CE: hpet increasing min_delta_ns to 40226 nsec
hrtimer: interrupt took 32435 ns