dmesg - Junior
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. M61PM-S2/M61PM-S2, BIOS Beta F9c 03/10/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 0100000000 mask FFE0000000 write-back
3 base 0120000000 mask FFF0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfff0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f4970] f4970
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000096000] 96000 size 20480
init_memory_mapping: 0000000000000000-00000000bfff0000
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bfff0000 page 4k
kernel direct mapping tables up to bfff0000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ bffee000-bfff0000
RAMDISK: 36a78000 - 37534000
ACPI: RSDP 00000000000f6340 00014 (v00 GBT )
ACPI: RSDT 00000000bfff3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: FACP 00000000bfff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: DSDT 00000000bfff30c0 04695 (v01 GBT NVDAACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000bfff0000 00040
ACPI: SSDT 00000000bfff7840 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000bfff7a40 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098)
ACPI: MCFG 00000000bfff7a80 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: APIC 00000000bfff7780 00098 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Initmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [000000012fffb000 - 000000012fffffff]
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012ba00000-ffff88012effffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bfff0
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 982907
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3918 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 768040 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10dea201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfff0000 - 00000000bfff3000
PM: Registered nosave memory: 00000000bfff3000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000e8000000
PM: Registered nosave memory: 00000000e8000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at e8000000 (gap: e8000000:16c00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s82944 r8192 d23552 u524288
pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 965878
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 5b4000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
Memory: 3724776k/4980736k available (3426k kernel code, 1049108k absent, 206852k reserved, 3312k data, 576k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2009.016 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.03 BogoMIPS (lpj=8036064)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 96000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (8036.25 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at bfff0000 (12288 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [e0000000, e7ffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, ffb7ffff]
TOM2: 0000000130000000 aka 4864M
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xd0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0x130000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xe0000000-0xe7ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500
pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601
pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io 0xb000-0xb03f]
pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io 0xb800-0xb83f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xee005000-0xee005fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xee006000-0xee0060ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
pci 0000:00:05.0: reg 10: [mem 0xee000000-0xee003fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
pci 0000:00:07.0: reg 10: [mem 0xee007000-0xee007fff]
pci 0000:00:07.0: reg 14: [io 0xbc00-0xbc07]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:08.0: reg 20: [io 0xd000-0xd00f]
pci 0000:00:08.0: reg 24: [mem 0xee008000-0xee008fff]
pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
pci 0000:00:08.1: reg 20: [io 0xe400-0xe40f]
pci 0000:00:08.1: reg 24: [mem 0xee004000-0xee004fff]
pci 0000:00:0d.0: [10de:03d0] type 0 class 0x000300
pci 0000:00:0d.0: reg 10: [mem 0xe8000000-0xe8ffffff]
pci 0000:00:0d.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:0d.0: reg 1c: [mem 0xec000000-0xecffffff 64bit]
pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:01:06.0: [14f1:8800] type 0 class 0x000400
pci 0000:01:06.0: reg 10: [mem 0xe9000000-0xe9ffffff]
pci 0000:01:06.2: [14f1:8802] type 0 class 0x000480
pci 0000:01:06.2: reg 10: [mem 0xea000000-0xeaffffff]
pci 0000:01:06.4: [14f1:8804] type 0 class 0x000480
pci 0000:01:06.4: reg 10: [mem 0xeb000000-0xebffffff]
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xe9000000-0xebffffff]
pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:0d.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009b800 - 000000000009ffff
reserve RAM buffer: 00000000bfff0000 - 00000000bfffffff
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1080-0x10ff]
pnp 00:01: [io 0x1400-0x147f]
pnp 00:01: [io 0x1480-0x14ff]
pnp 00:01: [io 0x1800-0x187f]
pnp 00:01: [io 0x1880-0x18ff]
pnp 00:01: [mem 0xfefe0000-0xfefe01ff]
pnp 00:01: [mem 0xfefe1000-0xfefe10ff]
pnp 00:01: [mem 0xc0000000-0xcfffffff]
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0800-0x087f]
pnp 00:02: [io 0x0295-0x0314]
pnp 00:02: [io 0x0290-0x0294]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0295-0x0314] has been reserved
system 00:02: [io 0x0290-0x0294] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [mem 0xe0000000-0xe7ffffff]
system 00:08: [mem 0xe0000000-0xe7ffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000cec00-0x000cffff]
pnp 00:09: [mem 0x000f0000-0x000f7fff]
pnp 00:09: [mem 0x000f8000-0x000fbfff]
pnp 00:09: [mem 0x000fc000-0x000fffff]
pnp 00:09: [mem 0xbfff0000-0xbfffffff]
pnp 00:09: [mem 0xffff0000-0xffffffff]
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x00100000-0xbffeffff]
pnp 00:09: [mem 0xc0000000-0xcfffffff]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
system 00:09: [mem 0x000cec00-0x000cffff] has been reserved
system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0xbfff0000-0xbfffffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xbffeffff] could not be reserved
system 00:09: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:0d.0: BAR 6: assigned [mem 0xed000000-0xed01ffff pref]
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [mem 0xe9000000-0xebffffff]
pci 0000:00:04.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xe9000000-0xebffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10992k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1391495426.644:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7425
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ERST: Table is not found!
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-02-04 06:30:27 UTC (1391495427)
Initializing network drop monitor service
Freeing unused kernel memory: 576k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 652k freed
Freeing unused kernel memory: 688k freed
udevd[52]: starting version 175
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
forcedeth 0000:00:07.0: setting latency timer to 64
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
libata version 3.00 loaded.
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:75:2a:e8
forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xee006000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xee005000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
sata_nv 0000:00:08.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd000 irq 20
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd008 irq 20
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
sata_nv 0000:00:08.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 23
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 23
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata5.00: HPA detected: current 781420655, native 781422768
ata5.00: ATA-7: SAMSUNG HD400LD, WQ100-14, max UDMA/100
ata5.00: 781420655 sectors, multi 16: LBA48
ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
ata5.00: configured for UDMA/100
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-5: new high-speed USB device number 3 using ehci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB00, max UDMA/33
ata1.00: applying bridge limits
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB00 PQ: 0 ANSI: 5
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-5: New USB device found, idVendor=0bda, idProduct=0151
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB2.0-CRW
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 20060413092100000
Initializing USB Mass Storage driver...
scsi6 : usb-storage 1-5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata4: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD400LD WQ10 PQ: 0 ANSI: 5
ata6: port disabled--ignoring
sd 4:0:0:0: [sda] 781420655 512-byte logical blocks: (400 GB/372 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 4:0:0:0: [sda] Attached SCSI disk
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
usb 2-3: new full-speed USB device number 2 using ohci_hcd
usb 2-3: New USB device found, idVendor=058f, idProduct=9254
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Generic USB Hub
usb 2-3: Manufacturer: ALCOR
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
usb 2-3.1: new full-speed USB device number 3 using ohci_hcd
usb 2-3.1: New USB device found, idVendor=17ef, idProduct=6011
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1: Product: Lenovo Preferred Pro USB Fingerprint Keyboard
usb 2-3.1: Manufacturer: Chicony
hub 2-3.1:1.0: USB hub found
hub 2-3.1:1.0: 2 ports detected
scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
usb 2-3.2: new low-speed USB device number 4 using ohci_hcd
usb 2-3.2: New USB device found, idVendor=045e, idProduct=0040
usb 2-3.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-3.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 2-3.2: Manufacturer: Microsoft
usb 2-3.3: new low-speed USB device number 5 using ohci_hcd
usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a4
usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.3: Product: 4 Port KVMSwicther
usb 2-3.3: Manufacturer: No brand
usb 2-3.3: SerialNumber: 3\xffffffc3\xffffffa4\xffffffa4\xffffffc3\xffffffb2\xffffffb2
usb 2-3.1.1: new full-speed USB device number 6 using ohci_hcd
usb 2-3.1.1: New USB device found, idVendor=17ef, idProduct=600b
usb 2-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1.1: Product: Lenovo Preferred Pro USB Fingerprint Keyboard
usb 2-3.1.1: Manufacturer: Chicony
usb 2-3.1.2: new full-speed USB device number 7 using ohci_hcd
usb 2-3.1.2: New USB device found, idVendor=0483, idProduct=2016
usb 2-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1.2: Product: Biometric Coprocessor
usb 2-3.1.2: Manufacturer: STMicroelectronics
udevd[373]: starting version 175
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Linux media interface: v0.10
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
EDAC MC: Ver: 2.1.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: PC Speaker as /devices/platform/pcspkr/input/input2
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0xb800
IR NEC protocol handler initialized
Linux video capture interface: v2.00
IR RC5(x) protocol handler initialized
[drm] Initialized drm 1.1.0 20060810
IR RC6 protocol handler initialized
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected], frontend(s): 1
cx88[0]: TV tuner type 4, Radio tuner type -1
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
tveeprom 2-0050: Hauppauge model 90002, rev C176, serial# 189835
tveeprom 2-0050: MAC address is 00:0d:fe:02:e5:8b
tveeprom 2-0050: tuner model is Thompson DTT7592 (idx 76, type 4)
tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 2-0050: audio processor is None (idx 0)
tveeprom 2-0050: decoder processor is CX882 (idx 25)
tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=90002
Registered IR keymap rc-hauppauge
input: cx88 IR (Hauppauge Nova-T DVB-T as /devices/pci0000:00/0000:00:04.0/0000:01:06.2/rc/rc0/input3
rc0: cx88 IR (Hauppauge Nova-T DVB-T as /devices/pci0000:00/0000:00:04.0/0000:01:06.2/rc/rc0
input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input4
rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 16, latency: 32, mmio: 0xea000000
cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 16, latency: 32, mmio: 0xe9000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00)
powernow-k8: fid 0xc (2000 MHz), vid 0xc
powernow-k8: fid 0xa (1800 MHz), vid 0xe
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
wmi: Mapper loaded
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.2/2-3.2:1.0/input/input5
generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-3.2/input0
cx88/2: cx2388x dvb driver version 0.0.9 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 1 frontend(s)
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
hda_intel: Disabling MSI
snd_hda_intel 0000:00:05.0: setting latency timer to 64
input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.3/2-3.3:1.0/input/input6
generic-usb 0003:10D5:55A4.0002: input,hidraw1: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:02.0-3.3/input0
usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint
input: Chicony Lenovo Preferred Pro USB Fingerprint Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1.1/2-3.1.1:1.0/input/input7
generic-usb 0003:17EF:600B.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony Lenovo Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:02.0-3.1.1/input0
generic-usb 0003:17EF:600B.0004: hiddev0,hidraw3: USB HID v1.10 Device [Chicony Lenovo Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:02.0-3.1.1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
DVB: registering new adapter (cx88[0])
DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input8
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21
nouveau 0000:00:0d.0: setting latency timer to 64
[drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
[drm] nouveau 0000:00:0d.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:00:0d.0: ... appears to be valid
[drm] nouveau 0000:00:0d.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:00:0d.0: BIT BIOS found
[drm] nouveau 0000:00:0d.0: Bios version 05.61.32.19
[drm] nouveau 0000:00:0d.0: TMDS table version 1.1
[drm] nouveau 0000:00:0d.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:00:0d.0: DCB version 3.0
[drm] nouveau 0000:00:0d.0: DCB outp 00: 01000310 00000023
[drm] nouveau 0000:00:0d.0: DCB outp 01: 00110204 97e70000
[drm] nouveau 0000:00:0d.0: DCB conn 00: 0000
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDB8A
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDCE1
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDCE2
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDE64
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDEAD
[TTM] Zone kernel: Available graphics memory: 1901818 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:00:0d.0: Detected 256MiB VRAM (unknown type)
[drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[drm] nouveau 0000:00:0d.0: Saving VGA fonts
[drm] nouveau 0000:00:0d.0: DCB type 4 not known
[drm] nouveau 0000:00:0d.0: Unknown-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:00:0d.0: 1 available performance level(s)
[drm] nouveau 0000:00:0d.0: 0: core 425MHz shader 425MHz fanspeed 100%
[drm] nouveau 0000:00:0d.0: c:
[drm] nouveau 0000:00:0d.0: allocated 1920x1080 fb: 0x49000, bo ffff880127828800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:00:0d.0 on minor 0
Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k
EXT3-fs (sda1): using internal journal
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda6): using internal journal
EXT3-fs (sda6): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with ordered data mode
forcedeth 0000:00:07.0: irq 40 for MSI/MSI-X
eth0: no IPv6 routers present
usb 2-3: USB disconnect, device number 2
usb 2-3.1: USB disconnect, device number 3
usb 2-3.1.1: USB disconnect, device number 6
usb 2-3.1.2: USB disconnect, device number 7
usb 2-3.2: USB disconnect, device number 4
usb 2-3.3: USB disconnect, device number 5
usb 2-3: new full-speed USB device number 8 using ohci_hcd
usb 2-3: New USB device found, idVendor=058f, idProduct=9254
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Generic USB Hub
usb 2-3: Manufacturer: ALCOR
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 2-3.1: new full-speed USB device number 9 using ohci_hcd
usb 2-3.1: New USB device found, idVendor=17ef, idProduct=6011
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1: Product: Lenovo Preferred Pro USB Fingerprint Keyboard
usb 2-3.1: Manufacturer: Chicony
hub 2-3.1:1.0: USB hub found
hub 2-3.1:1.0: 2 ports detected
usb 2-3.2: new low-speed USB device number 10 using ohci_hcd
usb 2-3.2: New USB device found, idVendor=045e, idProduct=0040
usb 2-3.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-3.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 2-3.2: Manufacturer: Microsoft
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.2/2-3.2:1.0/input/input9
generic-usb 0003:045E:0040.0005: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-3.2/input0
usb 2-3.1.1: new full-speed USB device number 11 using ohci_hcd
usb 2-3.1.1: New USB device found, idVendor=17ef, idProduct=600b
usb 2-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1.1: Product: Lenovo Preferred Pro USB Fingerprint Keyboard
usb 2-3.1.1: Manufacturer: Chicony
input: Chicony Lenovo Preferred Pro USB Fingerprint Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1.1/2-3.1.1:1.0/input/input10
generic-usb 0003:17EF:600B.0006: input,hidraw1: USB HID v1.10 Keyboard [Chicony Lenovo Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:02.0-3.1.1/input0
generic-usb 0003:17EF:600B.0007: hiddev0,hidraw2: USB HID v1.10 Device [Chicony Lenovo Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:02.0-3.1.1/input1
usb 2-3.1.2: new full-speed USB device number 12 using ohci_hcd
usb 2-3.1.2: New USB device found, idVendor=0483, idProduct=2016
usb 2-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1.2: Product: Biometric Coprocessor
usb 2-3.1.2: Manufacturer: STMicroelectronics
usb 2-3.3: new low-speed USB device number 13 using ohci_hcd
usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a4
usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.3: Product: 4 Port KVMSwicther
usb 2-3.3: Manufacturer: No brand
usb 2-3.3: SerialNumber: 3\xffffffc3\xffffffb4\xffffffb4\xffffffc3\xffffffb2\xffffffb2
input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.3/2-3.3:1.0/input/input11
generic-usb 0003:10D5:55A4.0008: input,hidraw3: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:02.0-3.3/input0
usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint