dmesg - audio-encoding
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-58-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #88-Ubuntu SMP Tue Dec 3 17:37:58 UTC 2013 (Ubuntu 3.2.0-58.88-generic 3.2.53)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091800 (usable)
[ 0.000000] BIOS-e820: 0000000000091800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf820000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff98000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff98000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A78, BIOS 1206 09/14/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf820 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf820000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cf800000 page 2M
[ 0.000000] 00cf800000 - 00cf820000 page 4k
[ 0.000000] kernel direct mapping tables up to cf820000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ cf81e000-cf820000
[ 0.000000] RAMDISK: 36b8e000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb860 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cff80000 00040 (v01 NEC 20090914 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80200 00084 (v01 091409 FACP2214 20090914 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000cff805d0 0CCE8 (v01 A1236 A1236001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff98000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0007C (v01 091409 APIC2214 20090914 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80410 0003C (v01 091409 OEMMCFG 20090914 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000cff80450 00176 (v01 NEC 20090914 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff98040 00072 (v01 091409 OEMB2214 20090914 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff8f5d0 00038 (v01 091409 OEMHPET 20090914 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff8f610 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000091
[ 0.000000] 0: 0x00000100 -> 0x000cf820
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2095009
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3900 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 829536 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf820000 - 00000000cff80000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff98000
[ 0.000000] PM: Registered nosave memory: 00000000cff98000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059164
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ e22a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8080000k/9175040k available (6588k kernel code, 795004k absent, 300036k reserved, 6617k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2807.900 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5615.80 BogoMIPS (lpj=11231600)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004029] Security Framework initialized
[ 0.004041] AppArmor: AppArmor initialized
[ 0.004043] Yama: becoming mindful.
[ 0.004554] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006975] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008948] Mount-cache hash table entries: 256
[ 0.009061] Initializing cgroup subsys cpuacct
[ 0.009066] Initializing cgroup subsys memory
[ 0.009074] Initializing cgroup subsys devices
[ 0.009076] Initializing cgroup subsys freezer
[ 0.009077] Initializing cgroup subsys blkio
[ 0.009083] Initializing cgroup subsys perf_event
[ 0.009107] tseg: 0000000000
[ 0.009118] CPU: Physical Processor ID: 0
[ 0.009120] CPU: Processor Core ID: 0
[ 0.009122] mce: CPU supports 6 MCE banks
[ 0.010383] ACPI: Core revision 20110623
[ 0.016010] ftrace: allocating 26602 entries in 105 pages
[ 0.020421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062417] CPU0: AMD Athlon(tm) II X4 630 Processor stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 8c000
[ 0.152025] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152095] #2
[ 0.152096] smpboot cpu 2: start_ip = 8c000
[ 0.244028] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244088] #3
[ 0.244089] smpboot cpu 3: start_ip = 8c000
[ 0.336035] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336051] Brought up 4 CPUs
[ 0.336053] Total of 4 processors activated (22463.94 BogoMIPS).
[ 0.336706] devtmpfs: initialized
[ 0.337293] EVM: security.selinux
[ 0.337295] EVM: security.SMACK64
[ 0.337296] EVM: security.capability
[ 0.337397] PM: Registering ACPI NVS region at cff98000 (229376 bytes)
[ 0.337397] print_constraints: dummy:
[ 0.337397] RTC time: 22:48:19, date: 01/29/14
[ 0.337397] NET: Registered protocol family 16
[ 0.337397] node 0 link 0: io port [1000, ffffff]
[ 0.337397] TOM: 00000000d0000000 aka 3328M
[ 0.337397] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.337397] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.337397] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.337397] node 0 link 0: mmio [a0000, bffff]
[ 0.337397] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.337397] TOM2: 0000000230000000 aka 8960M
[ 0.337397] bus: [00, 07] on node 0 link 0
[ 0.337397] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.337397] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.337397] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.337397] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
[ 0.337397] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.337397] Extended Config Space enabled on 1 nodes
[ 0.337397] ACPI: bus type pci registered
[ 0.337397] Trying to unpack rootfs image as initramfs...
[ 0.337397] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.337397] PCI: not using MMCONFIG
[ 0.337397] PCI: Using configuration type 1 for base access
[ 0.337397] PCI: Using configuration type 1 for extended access
[ 0.340047] bio: create slab at 0
[ 0.340075] ACPI: Added _OSI(Module Device)
[ 0.340075] ACPI: Added _OSI(Processor Device)
[ 0.340075] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.340075] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.340924] ACPI: EC: Look up EC in DSDT
[ 0.342202] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.420352] ACPI: Interpreter enabled
[ 0.420358] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.420376] ACPI: Using IOAPIC for interrupt routing
[ 0.420397] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.420966] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.443113] ACPI: No dock devices found.
[ 0.443116] HEST: Table not found.
[ 0.443120] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.443185] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.443310] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.443313] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.443315] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.443317] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.443319] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.443320] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.443334] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.443377] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.443406] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.443409] pci 0000:00:02.0: PME# disabled
[ 0.443424] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604
[ 0.443452] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.443454] pci 0000:00:06.0: PME# disabled
[ 0.443483] pci 0000:00:11.0: [1002:4392] type 0 class 0x000104
[ 0.443502] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.443511] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.443520] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.443529] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.443538] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.443548] pci 0000:00:11.0: reg 24: [mem 0xfbdffc00-0xfbdfffff]
[ 0.443603] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.443615] pci 0000:00:12.0: reg 10: [mem 0xfbdfe000-0xfbdfefff]
[ 0.443678] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.443691] pci 0000:00:12.1: reg 10: [mem 0xfbdfd000-0xfbdfdfff]
[ 0.443759] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.443777] pci 0000:00:12.2: reg 10: [mem 0xfbdff800-0xfbdff8ff]
[ 0.443857] pci 0000:00:12.2: supports D1 D2
[ 0.443858] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.443862] pci 0000:00:12.2: PME# disabled
[ 0.443884] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.443896] pci 0000:00:13.0: reg 10: [mem 0xfbdfc000-0xfbdfcfff]
[ 0.443958] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.443971] pci 0000:00:13.1: reg 10: [mem 0xfbdf7000-0xfbdf7fff]
[ 0.444059] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.444077] pci 0000:00:13.2: reg 10: [mem 0xfbdff400-0xfbdff4ff]
[ 0.444156] pci 0000:00:13.2: supports D1 D2
[ 0.444158] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.444162] pci 0000:00:13.2: PME# disabled
[ 0.444185] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.444280] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.444296] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.444305] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.444314] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.444323] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.444332] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.444388] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.444408] pci 0000:00:14.2: reg 10: [mem 0xfbdf0000-0xfbdf3fff 64bit]
[ 0.444472] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.444476] pci 0000:00:14.2: PME# disabled
[ 0.444488] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.444561] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.444603] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.444616] pci 0000:00:14.5: reg 10: [mem 0xfbdf6000-0xfbdf6fff]
[ 0.444680] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.444695] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.444706] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.444717] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.444731] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.444775] pci 0000:01:00.0: [1002:68d8] type 0 class 0x000300
[ 0.444786] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.444795] pci 0000:01:00.0: reg 18: [mem 0xfbee0000-0xfbefffff 64bit]
[ 0.444802] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.444813] pci 0000:01:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.444838] pci 0000:01:00.0: supports D1 D2
[ 0.444856] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[ 0.444867] pci 0000:01:00.1: reg 10: [mem 0xfbebc000-0xfbebffff 64bit]
[ 0.444915] pci 0000:01:00.1: supports D1 D2
[ 0.452054] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.452060] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.452063] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.452067] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.452124] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.452144] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.452166] pci 0000:02:00.0: reg 18: [mem 0xfbfff000-0xfbffffff 64bit]
[ 0.452192] pci 0000:02:00.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
[ 0.452253] pci 0000:02:00.0: supports D1 D2
[ 0.452255] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.452260] pci 0000:02:00.0: PME# disabled
[ 0.452278] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.452285] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.452288] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.452290] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.452350] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.452358] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.452361] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.452363] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.452365] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.452367] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.452369] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.452384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.452533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.452559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.452601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.452653] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.452656] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.452657] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.455822] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.455855] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.455883] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.455909] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.455936] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.455963] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.455990] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.456044] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.456161] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.456161] vgaarb: loaded
[ 0.456161] vgaarb: bridge control possible 0000:01:00.0
[ 0.456161] i2c-core: driver [aat2870] using legacy suspend method
[ 0.456161] i2c-core: driver [aat2870] using legacy resume method
[ 0.456189] SCSI subsystem initialized
[ 0.456231] libata version 3.00 loaded.
[ 0.456231] usbcore: registered new interface driver usbfs
[ 0.456231] usbcore: registered new interface driver hub
[ 0.456231] usbcore: registered new device driver usb
[ 0.456231] PCI: Using ACPI for IRQ routing
[ 0.464889] PCI: pci_cache_line_size set to 64 bytes
[ 0.464956] reserve RAM buffer: 0000000000091800 - 000000000009ffff
[ 0.464958] reserve RAM buffer: 00000000cf820000 - 00000000cfffffff
[ 0.465036] NetLabel: Initializing
[ 0.465037] NetLabel: domain hash size = 128
[ 0.465039] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.465048] NetLabel: unlabeled traffic allowed by default
[ 0.465092] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.465092] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.466083] Switching to clocksource hpet
[ 0.469340] AppArmor: AppArmor Filesystem Enabled
[ 0.469368] pnp: PnP ACPI init
[ 0.469382] ACPI: bus type pnp registered
[ 0.469480] pnp 00:00: [bus 00-ff]
[ 0.469482] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.469484] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.469486] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.469488] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.469490] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.469494] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.469495] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.469545] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.469574] pnp 00:01: [dma 4]
[ 0.469575] pnp 00:01: [io 0x0000-0x000f]
[ 0.469577] pnp 00:01: [io 0x0081-0x0083]
[ 0.469578] pnp 00:01: [io 0x0087]
[ 0.469580] pnp 00:01: [io 0x0089-0x008b]
[ 0.469581] pnp 00:01: [io 0x008f]
[ 0.469582] pnp 00:01: [io 0x00c0-0x00df]
[ 0.469606] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.469613] pnp 00:02: [io 0x0070-0x0071]
[ 0.469623] pnp 00:02: [irq 8]
[ 0.469642] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.469648] pnp 00:03: [io 0x0061]
[ 0.469669] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.469675] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.469679] pnp 00:04: [irq 13]
[ 0.469700] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.469730] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.469751] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.469937] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.469941] pnp 00:06: [irq 4]
[ 0.469943] pnp 00:06: [dma 0 disabled]
[ 0.470012] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.470068] pnp 00:07: [io 0x0060]
[ 0.470069] pnp 00:07: [io 0x0064]
[ 0.470071] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.470072] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.470118] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.470120] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.470123] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.470215] pnp 00:08: [io 0x0010-0x001f]
[ 0.470216] pnp 00:08: [io 0x0022-0x003f]
[ 0.470218] pnp 00:08: [io 0x0062-0x0063]
[ 0.470219] pnp 00:08: [io 0x0065-0x006f]
[ 0.470221] pnp 00:08: [io 0x0072-0x007f]
[ 0.470222] pnp 00:08: [io 0x0080]
[ 0.470224] pnp 00:08: [io 0x0084-0x0086]
[ 0.470225] pnp 00:08: [io 0x0088]
[ 0.470226] pnp 00:08: [io 0x008c-0x008e]
[ 0.470228] pnp 00:08: [io 0x0090-0x009f]
[ 0.470229] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.470230] pnp 00:08: [io 0x00b1]
[ 0.470232] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.470233] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.470235] pnp 00:08: [io 0x040b]
[ 0.470236] pnp 00:08: [io 0x04d6]
[ 0.470237] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.470239] pnp 00:08: [io 0x0c14]
[ 0.470240] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.470242] pnp 00:08: [io 0x0c52]
[ 0.470243] pnp 00:08: [io 0x0c6c]
[ 0.470244] pnp 00:08: [io 0x0c6f]
[ 0.470246] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.470247] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.470248] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.470250] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.470251] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.470253] pnp 00:08: [io 0x0800-0x089f]
[ 0.470254] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.470256] pnp 00:08: [io 0x0b00-0x0b0f]
[ 0.470257] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.470259] pnp 00:08: [io 0x0900-0x090f]
[ 0.470260] pnp 00:08: [io 0x0910-0x091f]
[ 0.470262] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.470263] pnp 00:08: [io 0x0060]
[ 0.470266] pnp 00:08: [io 0x0064]
[ 0.470268] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.470269] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.470329] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.470331] system 00:08: [io 0x040b] has been reserved
[ 0.470333] system 00:08: [io 0x04d6] has been reserved
[ 0.470335] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.470337] system 00:08: [io 0x0c14] has been reserved
[ 0.470339] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.470341] system 00:08: [io 0x0c52] has been reserved
[ 0.470343] system 00:08: [io 0x0c6c] has been reserved
[ 0.470345] system 00:08: [io 0x0c6f] has been reserved
[ 0.470346] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.470348] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.470350] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.470352] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.470354] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.470356] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.470358] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.470360] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.470362] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.470364] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.470366] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.470369] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.470371] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.470373] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.470434] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.470435] pnp 00:09: [io 0x0290-0x0297]
[ 0.470437] pnp 00:09: [io 0x02a0-0x02af]
[ 0.470471] system 00:09: [io 0x0290-0x0297] has been reserved
[ 0.470473] system 00:09: [io 0x02a0-0x02af] has been reserved
[ 0.470476] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.470676] pnp 00:0a: [io 0x0378-0x037f]
[ 0.470680] pnp 00:0a: [irq 5]
[ 0.470682] pnp 00:0a: [dma 0 disabled]
[ 0.470766] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.470794] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.470829] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.470831] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.470913] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.470915] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.470916] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.470918] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[ 0.470919] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.470962] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.470965] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.470967] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.470969] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.470971] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.470974] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.471048] pnp: PnP ACPI: found 13 devices
[ 0.471050] ACPI: ACPI bus type pnp unregistered
[ 0.477817] PCI: max bus depth: 1 pci_try_num: 2
[ 0.477835] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.477838] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.477841] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.477844] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.477847] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.477849] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.477852] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.477855] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.477880] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.477883] pci 0000:00:02.0: setting latency timer to 64
[ 0.477888] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.477890] pci 0000:00:06.0: setting latency timer to 64
[ 0.477897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.477899] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.477901] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.477903] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.477905] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.477907] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.477909] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.477911] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.477914] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.477916] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.477918] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.477921] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.477923] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.477925] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.477927] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.477929] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.477931] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.477966] NET: Registered protocol family 2
[ 0.478127] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.479233] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.481743] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.482044] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.482047] TCP reno registered
[ 0.482061] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.482115] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.482237] NET: Registered protocol family 1
[ 0.482274] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.604063] pci 0000:00:12.0: PCI INT A disabled
[ 0.604082] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.684063] pci 0000:00:12.1: PCI INT A disabled
[ 0.684089] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.684136] pci 0000:00:12.2: PCI INT B disabled
[ 0.684143] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.726015] Freeing initrd memory: 20872k freed
[ 0.764057] pci 0000:00:13.0: PCI INT A disabled
[ 0.764072] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.844054] pci 0000:00:13.1: PCI INT A disabled
[ 0.844079] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.844131] pci 0000:00:13.2: PCI INT B disabled
[ 0.844147] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.924055] pci 0000:00:14.5: PCI INT C disabled
[ 0.924074] pci 0000:01:00.0: Boot video device
[ 0.924081] PCI: CLS 64 bytes, default 64
[ 0.924310] PCI-DMA: Disabling AGP.
[ 0.924410] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.924412] PCI-DMA: using GART IOMMU.
[ 0.924414] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.927136] IBS: LVT offset 1 assigned
[ 0.927154] perf: AMD IBS detected (0x0000001f)
[ 0.927287] audit: initializing netlink socket (disabled)
[ 0.927298] type=2000 audit(1391035699.920:1): initialized
[ 0.945000] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.947174] VFS: Disk quotas dquot_6.5.2
[ 0.947224] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.947698] fuse init (API version 7.17)
[ 0.947773] msgmni has been set to 15950
[ 0.948189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.948219] io scheduler noop registered
[ 0.948221] io scheduler deadline registered
[ 0.948245] io scheduler cfq registered (default)
[ 0.948337] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.948364] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.948407] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.948427] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.948479] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.948495] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.948599] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.948603] ACPI: Power Button [PWRB]
[ 0.948636] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.948639] ACPI: Power Button [PWRF]
[ 0.949474] ERST: Table is not found!
[ 0.949476] GHES: HEST is not enabled!
[ 0.970029] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.209060] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.224361] Linux agpgart interface v0.103
[ 1.225549] brd: module loaded
[ 1.226174] loop: module loaded
[ 1.226331] ahci 0000:00:11.0: version 3.0
[ 1.226356] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.226473] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 1.226477] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.227000] scsi0 : ahci
[ 1.227084] scsi1 : ahci
[ 1.227148] scsi2 : ahci
[ 1.227210] scsi3 : ahci
[ 1.227249] ata1: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffd00 irq 22
[ 1.227253] ata2: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffd80 irq 22
[ 1.227256] ata3: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffe00 irq 22
[ 1.227259] ata4: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffe80 irq 22
[ 1.227419] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.227446] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.227768] Fixed MDIO Bus: probed
[ 1.227783] tun: Universal TUN/TAP device driver, 1.6
[ 1.227785] tun: (C) 1999-2004 Max Krasnyansky
[ 1.227846] PPP generic driver version 2.4.2
[ 1.227940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.227979] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.227999] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.228071] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.228079] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.228102] QUIRK: Enable AMD PLL fix
[ 1.228104] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.228116] ehci_hcd 0000:00:12.2: debug port 1
[ 1.228137] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbdff800
[ 1.240048] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.240210] hub 1-0:1.0: USB hub found
[ 1.240214] hub 1-0:1.0: 6 ports detected
[ 1.240326] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.240346] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.240399] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.240407] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.240419] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.240431] ehci_hcd 0000:00:13.2: debug port 1
[ 1.240455] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbdff400
[ 1.252047] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.252204] hub 2-0:1.0: USB hub found
[ 1.252208] hub 2-0:1.0: 6 ports detected
[ 1.252326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.252356] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.252376] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.252424] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.252450] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbdfe000
[ 1.312198] hub 3-0:1.0: USB hub found
[ 1.312205] hub 3-0:1.0: 3 ports detected
[ 1.312304] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.312325] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.312374] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.312391] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbdfd000
[ 1.372188] hub 4-0:1.0: USB hub found
[ 1.372195] hub 4-0:1.0: 3 ports detected
[ 1.372294] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.372316] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.372363] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.372390] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbdfc000
[ 1.432184] hub 5-0:1.0: USB hub found
[ 1.432192] hub 5-0:1.0: 3 ports detected
[ 1.432288] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.432309] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.432354] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.432374] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbdf7000
[ 1.492183] hub 6-0:1.0: USB hub found
[ 1.492191] hub 6-0:1.0: 3 ports detected
[ 1.492288] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.492309] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.492359] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.492377] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbdf6000
[ 1.544084] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.544167] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.552078] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 1.552185] hub 7-0:1.0: USB hub found
[ 1.552192] hub 7-0:1.0: 2 ports detected
[ 1.552269] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.552335] usbcore: registered new interface driver libusual
[ 1.552366] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.552750] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.552758] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.552928] mousedev: PS/2 mouse device common for all mice
[ 1.553059] rtc_cmos 00:02: RTC can wake from S4
[ 1.553160] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.553185] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.553253] device-mapper: uevent: version 1.0.3
[ 1.553318] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.553325] cpuidle: using governor ladder
[ 1.553326] cpuidle: using governor menu
[ 1.553328] EFI Variables Facility v0.08 2004-May-17
[ 1.553496] TCP cubic registered
[ 1.553569] NET: Registered protocol family 10
[ 1.553931] NET: Registered protocol family 17
[ 1.553934] Registering the dns_resolver key type
[ 1.554084] PM: Hibernation image not present or could not be loaded.
[ 1.554093] registered taskstats version 1
[ 1.560768] Magic number: 14:271:857
[ 1.560866] rtc_cmos 00:02: setting system clock to 2014-01-29 22:48:20 UTC (1391035700)
[ 1.560882] powernow-k8: Found 1 AMD Athlon(tm) II X4 630 Processor (4 cpu cores) (version 2.20.00)
[ 1.560911] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 1.560912] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 1.560914] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 1.560915] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.561252] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.561254] EDD information not available.
[ 1.716050] ata3: softreset failed (device not ready)
[ 1.716054] ata3: applying PMP SRST workaround and retrying
[ 1.716074] ata2: softreset failed (device not ready)
[ 1.716078] ata2: applying PMP SRST workaround and retrying
[ 1.852071] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.888073] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.888103] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.889299] ata3.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[ 1.889302] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.889339] ata2.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[ 1.889341] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.890770] ata3.00: configured for UDMA/133
[ 1.890864] ata2.00: configured for UDMA/133
[ 1.891055] scsi 1:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[ 1.891198] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.891202] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.891222] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.891305] sd 1:0:0:0: [sda] Write Protect is off
[ 1.891309] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.891358] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.891363] scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[ 1.891511] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.891513] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.891525] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.891595] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.891598] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.891629] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.924047] Refined TSC clocksource calibration: 2807.900 MHz.
[ 1.924052] Switching to clocksource tsc
[ 1.926053] sdb: sdb1 sdb2 < sdb5 >
[ 1.926497] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.929018] sda: sda1 sda2 < sda5 >
[ 1.929452] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.930626] Freeing unused kernel memory: 924k freed
[ 1.930845] Write protecting the kernel read-only data: 12288k
[ 1.935153] Freeing unused kernel memory: 1584k freed
[ 1.938790] Freeing unused kernel memory: 1188k freed
[ 1.959641] udevd[103]: starting version 175
[ 1.987835] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.987869] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.987907] r8169 0000:02:00.0: setting latency timer to 64
[ 1.987963] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.988439] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000c22000, 90:e6:ba:c0:8b:9e, XID 18000000 IRQ 42
[ 1.988442] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 1.990720] Initializing USB Mass Storage driver...
[ 1.991015] scsi4 : usb-storage 2-1:1.0
[ 1.991089] usbcore: registered new interface driver usb-storage
[ 1.991091] USB Mass Storage support registered.
[ 1.994795] wmi: Mapper loaded
[ 1.997917] scsi5 : pata_atiixp
[ 1.998021] scsi6 : pata_atiixp
[ 1.998499] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.998502] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.161378] ata5.00: ATAPI: LITE-ON COMBO LTC-48161H, KH0N, max UDMA/33
[ 2.161384] ata5.01: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL03, max UDMA/33
[ 2.162071] ata5.00: configured for UDMA/33
[ 2.176437] ata5.01: configured for UDMA/33
[ 2.179314] scsi 5:0:0:0: CD-ROM LITE-ON COMBO LTC-48161H KH0N PQ: 0 ANSI: 5
[ 2.180362] sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
[ 2.180364] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.180481] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.180585] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 2.184456] scsi 5:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL03 PQ: 0 ANSI: 5
[ 2.188174] ata6.00: ATA-8: ST3320613AS, CC2F, max UDMA/133
[ 2.188178] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.190958] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.191126] sr 5:0:1:0: Attached scsi CD-ROM sr1
[ 2.191262] sr 5:0:1:0: Attached scsi generic sg3 type 5
[ 2.247789] ata6.00: configured for UDMA/100
[ 2.247978] scsi 6:0:0:0: Direct-Access ATA ST3320613AS CC2F PQ: 0 ANSI: 5
[ 2.248142] sd 6:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.248167] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.248229] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.248232] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.248276] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.254476] sdc: sdc1 sdc2 sdc3
[ 2.254912] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2.327520] device-mapper: table: 252:3: dm-0 too small for target: start=959995904, len=16777216, dev_size=976562432
[ 2.532029] usb 4-3: new low-speed USB device number 2 using ohci_hcd
[ 2.728305] input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input2
[ 2.728402] generic-usb 0003:04D9:0274.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.1-3/input0
[ 2.754226] input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input3
[ 2.754332] generic-usb 0003:04D9:0274.0002: input,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.1-3/input1
[ 2.754354] usbcore: registered new interface driver usbhid
[ 2.754356] usbhid: USB HID core driver
[ 2.976051] usb 5-2: new low-speed USB device number 2 using ohci_hcd
[ 3.030197] scsi 4:0:0:0: Direct-Access Hitachi HDP725050GLA360 PQ: 0 ANSI: 2 CCS
[ 3.030765] sd 4:0:0:0: Attached scsi generic sg5 type 0
[ 3.031910] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.032801] sd 4:0:0:0: [sdd] Write Protect is off
[ 3.032806] sd 4:0:0:0: [sdd] Mode Sense: 34 00 00 00
[ 3.033551] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.045691] sdd: sdd2
[ 3.048559] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 3.169298] generic-usb 0003:0665:5161.0003: hiddev0,hidraw2: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:13.0-2/input0
[ 3.432056] usb 5-3: new full-speed USB device number 3 using ohci_hcd
[ 4.020056] usb 6-1: new full-speed USB device number 2 using ohci_hcd
[ 4.150359] xor: automatically using best checksumming function: generic_sse
[ 4.168024] generic_sse: 11475.000 MB/sec
[ 4.168026] xor: using function: generic_sse (11475.000 MB/sec)
[ 4.168501] device-mapper: dm-raid45: initialized v0.2594b
[ 9.548758] kjournald starting. Commit interval 5 seconds
[ 9.548876] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 12.767355] EXT3-fs (dm-1): using internal journal
[ 15.086594] FAT-fs (sdc3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 15.207072] kjournald starting. Commit interval 5 seconds
[ 15.207582] EXT3-fs (sdd2): using internal journal
[ 15.207588] EXT3-fs (sdd2): mounted filesystem with ordered data mode
[ 15.817857] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.507939] udevd[813]: starting version 175
[ 19.318440] lp: driver loaded but no devices found
[ 20.213869] ppdev: user-space parallel port driver
[ 20.248107] parport_pc 00:0a: reported by Plug and Play ACPI
[ 20.248161] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 20.344233] lp0: using parport0 (interrupt-driven).
[ 20.912751] Bluetooth: Core ver 2.16
[ 20.912779] NET: Registered protocol family 31
[ 20.912780] Bluetooth: HCI device and connection manager initialized
[ 20.912783] Bluetooth: HCI socket layer initialized
[ 20.912785] Bluetooth: L2CAP socket layer initialized
[ 20.912790] Bluetooth: SCO socket layer initialized
[ 20.953427] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 20.954042] usbcore: registered new interface driver btusb
[ 20.970379] MCE: In-kernel MCE decoding enabled.
[ 20.974686] EDAC MC: Ver: 2.1.0
[ 20.978884] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 20.978887] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.982540] AMD64 EDAC driver v3.4.0
[ 20.982597] EDAC amd64: DRAM ECC disabled.
[ 20.982607] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 20.982608] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 20.982609] (Note that use of the override may cause unknown side effects.)
[ 21.041906] type=1400 audit(1391028519.975:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=857 comm="apparmor_parser"
[ 21.042389] type=1400 audit(1391028519.975:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=857 comm="apparmor_parser"
[ 21.319490] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 21.319571] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 21.566581] device-mapper: multipath: version 1.3.1 loaded
[ 21.675791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.675794] Bluetooth: BNEP filters: protocol multicast
[ 22.416804] Bluetooth: RFCOMM TTY layer initialized
[ 22.416810] Bluetooth: RFCOMM socket layer initialized
[ 22.416812] Bluetooth: RFCOMM ver 1.11
[ 22.635190] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 22.635194] Disabling lock debugging due to kernel taint
[ 22.656300] [fglrx] Maximum main memory to use for locked dma buffers: 7746 MBytes.
[ 22.656403] [fglrx] vendor: 1002 device: 68d8 count: 1
[ 22.656811] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 22.656824] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 22.656828] pci 0000:01:00.0: setting latency timer to 64
[ 22.657198] [fglrx] Kernel PAT support is enabled
[ 22.657217] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 23.006472] WARNING! power/level is deprecated; use power/control instead
[ 23.558782] type=1400 audit(1391028522.491:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1119 comm="apparmor_parser"
[ 23.558799] type=1400 audit(1391028522.491:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1081 comm="apparmor_parser"
[ 23.559192] type=1400 audit(1391028522.491:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1119 comm="apparmor_parser"
[ 23.559213] type=1400 audit(1391028522.491:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1081 comm="apparmor_parser"
[ 23.559429] type=1400 audit(1391028522.491:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1119 comm="apparmor_parser"
[ 23.559455] type=1400 audit(1391028522.491:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1081 comm="apparmor_parser"
[ 23.732995] Linux video capture interface: v2.00
[ 23.871602] em28xx: New device @ 480 Mbps (eb1a:2710, interface 0, class 0)
[ 23.871663] em28xx #0: chip ID is em2710
[ 23.960898] em28xx #0: board has no eeprom
[ 24.144061] em28xx #0: Sensor is mt9v011, using model Silvercrest Webcam 1.3mpix entry.
[ 24.144073] em28xx #0: Identified as Silvercrest Webcam 1.3mpix (card=71)
[ 24.193126] mt9v011 0-005d: chip found @ 0xba (em28xx #0 - chip version 0x8232)
[ 24.193247] em28xx #0: Config register raw data: 0x00
[ 24.423607] type=1400 audit(1391028523.355:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=1158 comm="apparmor_parser"
[ 24.423770] type=1400 audit(1391028523.355:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1157 comm="apparmor_parser"
[ 24.459185] IR NEC protocol handler initialized
[ 24.560854] em28xx #0: v4l2 driver version 0.1.3
[ 24.626592] IR RC5(x) protocol handler initialized
[ 24.689203] device-mapper: table: 252:3: dm-0 too small for target: start=959995904, len=16777216, dev_size=976562432
[ 24.690698] IR RC6 protocol handler initialized
[ 24.818084] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.956141] em28xx #0: V4L2 video device registered as video0
[ 24.956176] usbcore: registered new interface driver em28xx
[ 24.956178] em28xx driver loaded
[ 25.450088] IR JVC protocol handler initialized
[ 25.684519] IR Sony protocol handler initialized
[ 25.905281] hda_codec: ALC887: BIOS auto-probing.
[ 25.915666] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 25.915779] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 25.915833] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 25.915886] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 25.915939] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 25.915990] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 25.916408] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 25.916478] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
[ 25.916498] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 25.949732] IR MCE Keyboard/mouse protocol handler initialized
[ 25.968237] lirc_dev: IR Remote Control driver registered, major 249
[ 26.018240] IR LIRC bridge handler initialized
[ 26.046965] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 26.047060] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 26.879504] init: failsafe main process (1210) killed by TERM signal
[ 29.192723] init: udev-fallback-graphics main process (1452) terminated with status 1
[ 30.340222] r8169 0000:02:00.0: eth0: link down
[ 30.340231] r8169 0000:02:00.0: eth0: link down
[ 30.340944] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.341216] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.493419] type=1400 audit(1391028529.427:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1508 comm="apparmor_parser"
[ 30.493853] type=1400 audit(1391028529.427:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1508 comm="apparmor_parser"
[ 30.494064] type=1400 audit(1391028529.427:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1510 comm="apparmor_parser"
[ 30.494092] type=1400 audit(1391028529.427:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1508 comm="apparmor_parser"
[ 30.494585] type=1400 audit(1391028529.427:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1510 comm="apparmor_parser"
[ 30.566438] type=1400 audit(1391028529.499:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1511 comm="apparmor_parser"
[ 30.566680] type=1400 audit(1391028529.499:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1511 comm="apparmor_parser"
[ 30.712907] type=1400 audit(1391028529.647:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1513 comm="apparmor_parser"
[ 30.737968] type=1400 audit(1391028529.671:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=1512 comm="apparmor_parser"
[ 30.738207] type=1400 audit(1391028529.671:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=1512 comm="apparmor_parser"
[ 31.975250] r8169 0000:02:00.0: eth0: link up
[ 31.975936] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 36.673597] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[ 36.674448] [fglrx] Firegl kernel thread PID: 2056
[ 36.674518] [fglrx] Firegl kernel thread PID: 2057
[ 36.674587] [fglrx] Firegl kernel thread PID: 2058
[ 36.674687] [fglrx] IRQ 44 Enabled
[ 38.030143] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 38.083357] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 38.304366] [fglrx] Gart USWC size:1280 M.
[ 38.304369] [fglrx] Gart cacheable size:508 M.
[ 38.304373] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 38.304375] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 38.304377] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 43.120023] eth0: no IPv6 routers present
[ 49.411680] init: plymouth-stop pre-start process (2478) terminated with status 1
[ 56.796061] usb 4-2: new low-speed USB device number 3 using ohci_hcd
[ 56.972635] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input11
[ 56.972771] generic-usb 0003:046D:C03D.0004: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-2/input0
[ 261.293179] [fglrx] IRQ 44 Disabled
[ 262.053431] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[ 262.054305] [fglrx] Firegl kernel thread PID: 3279
[ 262.054396] [fglrx] Firegl kernel thread PID: 3280
[ 262.054486] [fglrx] Firegl kernel thread PID: 3281
[ 262.054582] [fglrx] IRQ 44 Enabled
[ 262.131282] [fglrx] Gart USWC size:1280 M.
[ 262.131286] [fglrx] Gart cacheable size:508 M.
[ 262.131290] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 262.131292] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 262.131294] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 2713.566088] usb 2-1: USB disconnect, device number 2