dmesg - cbench-bfq2
Initializing cgroup subsys cpuset
Linux version 3.12.8-1.kx.el6.x86_64 (build@scotty.kgix.net) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Wed Jan 22 21:30:44 EST 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007e16dfff] usable
BIOS-e820: [mem 0x000000007e16e000-0x000000007e22dfff] ACPI NVS
BIOS-e820: [mem 0x000000007e22e000-0x000000007fa31fff] usable
BIOS-e820: [mem 0x000000007fa32000-0x000000007fa99fff] reserved
BIOS-e820: [mem 0x000000007fa9a000-0x000000007faa9fff] usable
BIOS-e820: [mem 0x000000007faaa000-0x000000007fb19fff] ACPI NVS
BIOS-e820: [mem 0x000000007fb1a000-0x000000007fb22fff] usable
BIOS-e820: [mem 0x000000007fb23000-0x000000007fb39fff] ACPI data
BIOS-e820: [mem 0x000000007fb3a000-0x000000007fbfffff] usable
BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc0bfff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: DELL CS23-SH/CS23-SH, BIOS S5400.86B.06.00.0028.081320082126 08/13/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask 3F80000000 write-back
1 base 007FC00000 mask 3FFFC00000 uncachable
2 base 0100000000 mask 3F00000000 write-back
3 base 0200000000 mask 3E00000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2044MB, range: 4MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
total RAM covered: 14332M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 8M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2044MB, range: 4MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
e820: update [mem 0x7fc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7fc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd410-0x000fd41f] mapped at [ffff8800000fd410]
Base memory trampoline at [ffff880000097000] 97000 size 28672
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0208f000, 0x0208ffff] PGTABLE
BRK [0x02090000, 0x02090fff] PGTABLE
BRK [0x02091000, 0x02091fff] PGTABLE
init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
[mem 0x27fe00000-0x27fffffff] page 2M
BRK [0x02092000, 0x02092fff] PGTABLE
init_memory_mapping: [mem 0x27c000000-0x27fdfffff]
[mem 0x27c000000-0x27fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x27bffffff]
[mem 0x200000000-0x27bffffff] page 2M
BRK [0x02093000, 0x02093fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x7e16dfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7dffffff] page 2M
[mem 0x7e000000-0x7e16dfff] page 4k
init_memory_mapping: [mem 0x7e22e000-0x7fa31fff]
[mem 0x7e22e000-0x7e3fffff] page 4k
[mem 0x7e400000-0x7f9fffff] page 2M
[mem 0x7fa00000-0x7fa31fff] page 4k
BRK [0x02094000, 0x02094fff] PGTABLE
init_memory_mapping: [mem 0x7fa9a000-0x7faa9fff]
[mem 0x7fa9a000-0x7faa9fff] page 4k
init_memory_mapping: [mem 0x7fb1a000-0x7fb22fff]
[mem 0x7fb1a000-0x7fb22fff] page 4k
init_memory_mapping: [mem 0x7fb3a000-0x7fbfffff]
[mem 0x7fb3a000-0x7fbfffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x36d9f000-0x37feffff]
crashkernel: memory value expected
ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL )
ACPI: XSDT 000000007fb39120 00094 (v01 INTEL S5400SF 00000000 INTL 01000013)
ACPI: DMAR 000000007fb37000 00088 (v01 INTEL S5400SF 00000001 INTL 01000013)
ACPI: SLIC 000000007fb36000 00176 (v01 INTEL S5400SF 00000002 INTL 01000013)
ACPI: FACP 000000007fb34000 000F4 (v03 INTEL S5400SF 00000000 INTL 01000013)
ACPI: DSDT 000000007fb2d000 05664 (v02 INTEL S5400SF 00000008 INTL 01000013)
ACPI: FACS 000000007faaa000 00040
ACPI: APIC 000000007fb33000 000C8 (v01 INTEL S5400SF 00000000 INTL 01000013)
ACPI: SPCR 000000007fb2c000 00050 (v01 INTEL S5400SF 00000000 INTL 01000013)
ACPI: HPET 000000007fb2b000 00038 (v01 INTEL S5400SF 00000001 INTL 01000013)
ACPI: MCFG 000000007fb2a000 0003C (v01 INTEL S5400SF 00000001 INTL 01000013)
ACPI: SSDT 000000007fb29000 00A14 (v02 INTEL EIST 00004000 INTL 01000013)
ACPI: SSDT 000000007fb28000 00193 (v02 INTEL IPMI 00004000 INTL 01000013)
ACPI: SSDT 000000007fb27000 002D4 (v02 INTEL CST 00004000 INTL 01000013)
ACPI: HEST 000000007fb26000 000A8 (v01 INTEL S5400SF 00000001 INTL 00000001)
ACPI: BERT 000000007fb25000 00030 (v01 INTEL S5400SF 00000001 INTL 00000001)
ACPI: ERST 000000007fb24000 00230 (v01 INTEL S5400SF 00000001 INTL 00000001)
ACPI: EINJ 000000007fb23000 00130 (v01 INTEL S5400SF 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x00000000-0x27fffffff]
NODE_DATA [mem 0x27ffd2000-0x27fff8fff]
[ffffea0000000000-ffffea0009ffffff] PMD -> [ffff880277600000-ffff88027f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x27fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x7e16dfff]
node 0: [mem 0x7e22e000-0x7fa31fff]
node 0: [mem 0x7fa9a000-0x7faa9fff]
node 0: [mem 0x7fb1a000-0x7fb22fff]
node 0: [mem 0x7fb3a000-0x7fbfffff]
node 0: [mem 0x100000000-0x27fffffff]
On node 0 totalpages: 2095598
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8106 pages used for memmap
DMA32 zone: 518737 pages, LIFO batch:31
Normal zone: 24576 pages used for memmap
Normal zone: 1572864 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec88000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x7e16e000-0x7e22dfff]
PM: Registered nosave memory: [mem 0x7fa32000-0x7fa99fff]
PM: Registered nosave memory: [mem 0x7faaa000-0x7fb19fff]
PM: Registered nosave memory: [mem 0x7fb23000-0x7fb39fff]
PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffc0bfff]
PM: Registered nosave memory: [mem 0xffc0c000-0xffffffff]
e820: [mem 0x90000000-0xffbfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88027fc00000 s84928 r8192 d21568 u262144
pcpu-alloc: s84928 r8192 d21568 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062830
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 8148108K/8382392K available (6203K kernel code, 1124K rwdata, 3020K rodata, 1584K init, 1924K bss, 234284K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=8.
NR_IRQS:262400 nr_irqs:1152 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2792.974 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.94 BogoMIPS (lpj=27929740)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys bfqio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 20K (ffffffff81ea7000 - ffffffff81eac000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 25665 entries in 101 pages
dmar: Host address width 38
dmar: DRHD base: 0x000000fe714000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fe714000 ver 1:0 cap 900000c250462 ecap e01
dmar: DRHD base: 0x000000fe719000 flags: 0x0
dmar: IOMMU 1: reg_base_addr fe719000 ver 1:0 cap 900000c250462 ecap e01
dmar: DRHD base: 0x000000fe71a000 flags: 0x0
dmar: IOMMU 2: reg_base_addr fe71a000 ver 1:0 cap 4900000c250462 ecap e01
dmar: DRHD base: 0x000000fe718000 flags: 0x1
dmar: IOMMU 3: reg_base_addr fe718000 ver 1:0 cap 900000c250462 ecap e01
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5462 @ 2.80GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (44688.06 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7e16e000-0x7e22dfff] (786432 bytes)
PM: Registering ACPI NVS region [mem 0x7faaa000-0x7fb19fff] (458752 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20130725/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff880274066de8), AE_AML_BUFFER_LIMIT (20130725/psparse-536)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hwxface-571)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0ca1]
pci_bus 0000:00: root bus resource [io 0x0ca4-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfe700000-0xfe703fff]
pci 0000:00:00.0: [8086:4003] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:4025] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:4029] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.0: [8086:402f] type 00 class 0x088000
pci 0000:00:0f.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:10.0: [8086:4030] type 00 class 0x060000
pci 0000:00:10.1: [8086:4030] type 00 class 0x060000
pci 0000:00:10.2: [8086:4030] type 00 class 0x060000
pci 0000:00:10.3: [8086:4030] type 00 class 0x060000
pci 0000:00:10.4: [8086:4030] type 00 class 0x060000
pci 0000:00:11.0: [8086:4031] type 00 class 0x060000
pci 0000:00:15.0: [8086:4035] type 00 class 0x060000
pci 0000:00:15.1: [8086:4035] type 00 class 0x060000
pci 0000:00:16.0: [8086:4036] type 00 class 0x060000
pci 0000:00:16.1: [8086:4036] type 00 class 0x060000
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x30a0-0x30bf]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x3080-0x309f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x98b04400-0x98b047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.0: System wakeup disabled by ACPI
pci 0000:00:1f.2: [8086:2681] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30c8-0x30cf]
pci 0000:00:1f.2: reg 0x14: [io 0x30d4-0x30d7]
pci 0000:00:1f.2: reg 0x18: [io 0x30c0-0x30c7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30d0-0x30d3]
pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f]
pci 0000:00:1f.2: reg 0x24: [mem 0x98b04000-0x98b043ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
pci 0000:00:05.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:3500] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.3: [8086:350c] type 01 class 0x060400
pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: PCI bridge to [bus 02-07]
pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0x98000000-0x989fffff]
pci 0000:03:00.0: [8086:3510] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:03:01.0: [8086:3514] type 01 class 0x060400
pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
pci 0000:03:01.0: System wakeup disabled by ACPI
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:03:02.0: [8086:3518] type 01 class 0x060400
pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
pci 0000:03:02.0: System wakeup disabled by ACPI
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:02:00.0: PCI bridge to [bus 03-06]
pci 0000:02:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:02:00.0: bridge window [mem 0x98000000-0x988fffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [8086:1096] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0x98820000-0x9883ffff]
pci 0000:06:00.0: reg 0x14: [mem 0x98400000-0x987fffff]
pci 0000:06:00.0: reg 0x18: [io 0x2020-0x203f]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.1: [8086:1096] type 00 class 0x020000
pci 0000:06:00.1: reg 0x10: [mem 0x98800000-0x9881ffff]
pci 0000:06:00.1: reg 0x14: [mem 0x98000000-0x983fffff]
pci 0000:06:00.1: reg 0x18: [io 0x2000-0x201f]
pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:03:02.0: PCI bridge to [bus 06]
pci 0000:03:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:03:02.0: bridge window [mem 0x98000000-0x988fffff]
pci 0000:02:00.3: PCI bridge to [bus 07]
pci 0000:08:0c.0: [1002:515e] type 00 class 0x030000
pci 0000:08:0c.0: reg 0x10: [mem 0x90000000-0x97ffffff pref]
pci 0000:08:0c.0: reg 0x14: [io 0x1000-0x10ff]
pci 0000:08:0c.0: reg 0x18: [mem 0x98a00000-0x98a0ffff]
pci 0000:08:0c.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:08:0c.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0x98a00000-0x98afffff]
pci 0000:00:1e.0: bridge window [mem 0x90000000-0x97ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0ca1] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0ca4-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x90000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfe700000-0xfe703fff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:08:0c.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:08:0c.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7e16e000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7fa32000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7faaa000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7fb23000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7fc00000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x80000000-0x8fffffff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x0400-0x047f] could not be reserved
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: [io 0x0ca2-0x0ca7] could not be reserved
system 00:05: [io 0x0ca8-0x0caf] has been reserved
system 00:05: [io 0x0161] has been reserved
system 00:05: [io 0x0162] has been reserved
system 00:05: [mem 0x00000400-0x000004ff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0c: Plug and Play ACPI device, IDs IPI0001 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:08:0c.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-06] add_size 200000
pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:09.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-07] add_size 200000
pci 0000:00:09.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:09.0: BAR 15: assigned [mem 0x98c00000-0x98dfffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 01]
pci 0000:02:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:02:00.0: BAR 15: assigned [mem 0x98c00000-0x98dfffff 64bit pref]
pci 0000:03:00.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:03:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:03:00.0: BAR 14: can't assign mem (size 0x200000)
pci 0000:03:00.0: BAR 15: assigned [mem 0x98c00000-0x98dfffff 64bit pref]
pci 0000:03:00.0: BAR 13: can't assign io (size 0x1000)
pci 0000:03:00.0: BAR 14: can't assign mem (size 0x200000)
pci 0000:03:00.0: BAR 13: can't assign io (size 0x1000)
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [mem 0x98c00000-0x98dfffff 64bit pref]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:02.0: PCI bridge to [bus 06]
pci 0000:03:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:03:02.0: bridge window [mem 0x98000000-0x988fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-06]
pci 0000:02:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:02:00.0: bridge window [mem 0x98000000-0x988fffff]
pci 0000:02:00.0: bridge window [mem 0x98c00000-0x98dfffff 64bit pref]
pci 0000:02:00.3: PCI bridge to [bus 07]
pci 0000:00:09.0: PCI bridge to [bus 02-07]
pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0x98000000-0x989fffff]
pci 0000:00:09.0: bridge window [mem 0x98c00000-0x98dfffff 64bit pref]
pci 0000:08:0c.0: BAR 6: assigned [mem 0x98a20000-0x98a3ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0x98a00000-0x98afffff]
pci 0000:00:1e.0: bridge window [mem 0x90000000-0x97ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0ca1]
pci_bus 0000:00: resource 5 [io 0x0ca4-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfdffffff]
pci_bus 0000:00: resource 10 [mem 0xfe700000-0xfe703fff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x98000000-0x989fffff]
pci_bus 0000:02: resource 2 [mem 0x98c00000-0x98dfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0x98000000-0x988fffff]
pci_bus 0000:03: resource 2 [mem 0x98c00000-0x98dfffff 64bit pref]
pci_bus 0000:04: resource 2 [mem 0x98c00000-0x98dfffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0x98000000-0x988fffff]
pci_bus 0000:08: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:08: resource 1 [mem 0x98a00000-0x98afffff]
pci_bus 0000:08: resource 2 [mem 0x90000000-0x97ffffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x0ca1]
pci_bus 0000:08: resource 5 [io 0x0ca4-0x0cf7]
pci_bus 0000:08: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 8 [mem 0x000c0000-0x000fffff]
pci_bus 0000:08: resource 9 [mem 0x90000000-0xfdffffff]
pci_bus 0000:08: resource 10 [mem 0xfe700000-0xfe703fff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:08:0c.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18756K (ffff880036d9f000 - ffff880037ff0000)
DMAR: No RMRR found
DMAR: No ATSR found
IOMMU 2 0xfe71a000: using Register based invalidation
IOMMU 1 0xfe719000: using Register based invalidation
IOMMU 0 0xfe714000: using Register based invalidation
IOMMU 3 0xfe718000: using Register based invalidation
IOMMU: Setting RMRR:
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
audit: initializing netlink socket (disabled)
type=2000 audit(1390614641.840:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 16079
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
pcieport 0000:00:09.0: driver skip pci_set_master, fix it!
pcieport 0000:02:00.0: driver skip pci_set_master, fix it!
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
ERST: Error Record Serialization Table (ERST) support is initialized.
console [pstore-1] enabled
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0x98b04400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12.8-1.kx.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.12.8-1.kx.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00003080
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.12.8-1.kx.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 23, io base 0x00003060
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.12.8-1.kx.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.12.8-1.kx.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: Created 1 device(s) ...
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:02: setting system clock to 2014-01-25 01:50:42 UTC (1390614642)
Freeing unused kernel memory: 1584K (ffffffff81d1b000 - ffffffff81ea7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1976K (ffff880001612000 - ffff880001800000)
Freeing unused kernel memory: 1076K (ffff880001af3000 - ffff880001c00000)
BFS CPU scheduler v0.444 by Con Kolivas.
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
udev: starting version 147
udevd (118): /proc/118/oom_adj is deprecated, please use /proc/118/oom_score_adj instead.
[drm] radeon kernel modesetting enabled.
pci 0000:00:1e.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x8086:0x34D4).
[drm] register mmio base: 0x98A00000
[drm] register mmio size: 65536
radeon 0000:08:0c.0: VRAM: 128M 0x0000000090000000 - 0x0000000097FFFFFF (32M used)
radeon 0000:08:0c.0: GTT: 512M 0x0000000070000000 - 0x000000008FFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 4118736 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x00000000FFF00000).
radeon 0000:08:0c.0: WB disabled
radeon 0000:08:0c.0: fence driver on ring 0 use gpu addr 0x0000000070000000 and cpu addr 0xffff880037e4a000
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
[drm] radeon: ring at 0x0000000070001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] No valid Ext TMDS info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD2
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] DFP2: INTERNAL_DVO1
[drm] fb mappable at 0x90040000
[drm] vram apper at 0x90000000
[drm] size 1310720
[drm] fb depth is 8
[drm] pitch is 1280
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
radeon 0000:08:0c.0: fb0: radeondrmfb frame buffer device
radeon 0000:08:0c.0: registered panic notifier
[drm] Initialized radeon 2.34.0 20080528 for 0000:08:0c.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0x98b04000 port 0x98b04100 irq 20
ata2: SATA max UDMA/133 abar m1024@0x98b04000 port 0x98b04180 irq 20
ata3: SATA max UDMA/133 abar m1024@0x98b04000 port 0x98b04200 irq 20
ata4: SATA max UDMA/133 abar m1024@0x98b04000 port 0x98b04280 irq 20
ata5: SATA max UDMA/133 abar m1024@0x98b04000 port 0x98b04300 irq 20
ata6: SATA max UDMA/133 abar m1024@0x98b04000 port 0x98b04380 irq 20
usb 5-1: new low-speed USB device number 2 using uhci_hcd
usb 5-1: New USB device found, idVendor=1061, idProduct=0101
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Keyboard & Mouse
usb 5-1: Manufacturer: Motorola
input: Motorola USB Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input5
hid-generic 0003:1061:0101.0001: input,hidraw0: USB HID v1.11 Keyboard [Motorola USB Keyboard & Mouse] on usb-0000:00:1d.3-1/input0
input: Motorola USB Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input6
hid-generic 0003:1061:0101.0002: input,hidraw1: USB HID v1.11 Mouse [Motorola USB Keyboard & Mouse] on usb-0000:00:1d.3-1/input1
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3750640NS, 3.AEF, max UDMA/133
ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: ATA-7: ST3750640NS, 3.AEF, max UDMA/133
ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: ATA-7: ST3750640NS, 3.AEF, max UDMA/133
ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: unknown partition table
sd 2:0:0:0: [sdc] Attached SCSI disk
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/sda5
dracut: Loading SELinux policy
type=1404 audit(1390614644.500:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277800 rules
SELinux: Permission audit_access in class file not defined in policy.
SELinux: Permission audit_access in class dir not defined in policy.
SELinux: Permission execmod in class dir not defined in policy.
SELinux: Permission audit_access in class lnk_file not defined in policy.
SELinux: Permission open in class lnk_file not defined in policy.
SELinux: Permission execmod in class lnk_file not defined in policy.
SELinux: Permission audit_access in class chr_file not defined in policy.
SELinux: Permission audit_access in class blk_file not defined in policy.
SELinux: Permission execmod in class blk_file not defined in policy.
SELinux: Permission audit_access in class sock_file not defined in policy.
SELinux: Permission execmod in class sock_file not defined in policy.
SELinux: Permission audit_access in class fifo_file not defined in policy.
SELinux: Permission execmod in class fifo_file not defined in policy.
SELinux: Permission syslog in class capability2 not defined in policy.
SELinux: Permission wake_alarm in class capability2 not defined in policy.
SELinux: Permission block_suspend in class capability2 not defined in policy.
SELinux: Permission attach_queue in class tun_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev aio, type aio), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev sda5, type ext4), uses xattr
type=1403 audit(1390614645.030:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:0f.0: irq 68 for MSI/MSI-X
ioatdma 0000:00:0f.0: irq 69 for MSI/MSI-X
ioatdma 0000:00:0f.0: irq 70 for MSI/MSI-X
ioatdma 0000:00:0f.0: irq 71 for MSI/MSI-X
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i5400_edac.c' 'I5400': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5400_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
pcieport 0000:03:02.0: driver skip pci_set_master, fix it!
e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:06:00.0: irq 72 for MSI/MSI-X
e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:8c:65:cc
e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.0 eth0: MAC: 5, PHY: 5, PBA No: 201000-000
e1000e 0000:06:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:06:00.1: irq 73 for MSI/MSI-X
e1000e 0000:06:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:8c:65:cd
e1000e 0000:06:00.1 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.1 eth1: MAC: 5, PHY: 5, PBA No: 201000-000
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMS0 1 (20130725/utaddress-251)
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.ICH1 2 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SI_.GPUS 1 (20130725/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPUS 2 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SI_.GPUS 1 (20130725/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.GPIV 2 (20130725/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPUS 3 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:0c: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
md: bind
md: bind
ipmi_si 00:0c: Found new BMC (man_id: 0x000157, prod_id: 0x003b, dev_id: 0x20)
ipmi_si 00:0c: IPMI kcs interface initialized
input: PC Speaker as /devices/platform/pcspkr/input/input7
microcode: CPU0 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU1 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU2 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU3 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU4 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU5 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU6 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU7 sig=0x10676, pf=0x40, revision=0x60c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
microcode: CPU1 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
microcode: CPU2 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU2 updated to revision 0x60f, date = 2010-09-29
microcode: CPU3 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU3 updated to revision 0x60f, date = 2010-09-29
microcode: CPU4 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU4 updated to revision 0x60f, date = 2010-09-29
microcode: CPU5 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU5 updated to revision 0x60f, date = 2010-09-29
microcode: CPU6 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU6 updated to revision 0x60f, date = 2010-09-29
microcode: CPU7 sig=0x10676, pf=0x40, revision=0x60c
microcode: CPU7 updated to revision 0x60f, date = 2010-09-29
md: raid1 personality registered for level 1
md/raid1:md127: active with 1 out of 2 mirrors
created bitmap (1 pages) for device md127
md127: bitmap initialized from disk: read 1 pages, set 0 of 16 bits
md127: detected capacity change from 0 to 1073729536
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdb1
md/raid1:md126: active with 1 out of 2 mirrors
created bitmap (6 pages) for device md126
md126: bitmap initialized from disk: read 1 pages, set 0 of 11163 bits
md126: detected capacity change from 0 to 749079490560
RAID1 conf printout:
--- wd:1 rd:2
disk 1, wo:0, o:1, dev:sdb2
md127: unknown partition table
md126: unknown partition table
bio: create slab at 1
EXT4-fs (sda5): re-mounted. Opts: (null)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext3), uses xattr
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda2, type ext4), uses xattr
Adding 8191996k swap on /dev/sda3. Priority:-1 extents:1 across:8191996k FS
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
e1000e 0000:06:00.0: irq 72 for MSI/MSI-X
e1000e 0000:06:00.0: irq 72 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:06:00.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready