dmesg - BIOLOGICO-1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.12.0-4-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-5ubuntu3) ) #12-Ubuntu SMP Tue Nov 26 22:38:40 UTC 2013 (Ubuntu 3.12.0-4.12-generic 3.12.1)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ad82efff] usable
BIOS-e820: [mem 0x00000000ad82f000-0x00000000ad881fff] ACPI NVS
BIOS-e820: [mem 0x00000000ad882000-0x00000000ad88bfff] ACPI data
BIOS-e820: [mem 0x00000000ad88c000-0x00000000ad88cfff] ACPI NVS
BIOS-e820: [mem 0x00000000ad88d000-0x00000000adad8fff] reserved
BIOS-e820: [mem 0x00000000adad9000-0x00000000adae9fff] ACPI NVS
BIOS-e820: [mem 0x00000000adaea000-0x00000000adafefff] reserved
BIOS-e820: [mem 0x00000000adaff000-0x00000000adb00fff] ACPI NVS
BIOS-e820: [mem 0x00000000adb01000-0x00000000adb09fff] reserved
BIOS-e820: [mem 0x00000000adb0a000-0x00000000adb0ffff] ACPI NVS
BIOS-e820: [mem 0x00000000adb10000-0x00000000adb71fff] reserved
BIOS-e820: [mem 0x00000000adb72000-0x00000000add74fff] ACPI NVS
BIOS-e820: [mem 0x00000000add75000-0x00000000adefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000024fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX, BIOS 1604 10/16/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x250000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000ADF00000 mask FFFFFFF00000 uncachable
3 base 0000AE000000 mask FFFFFE000000 uncachable
4 base 0000B0000000 mask FFFFF0000000 uncachable
5 disabled
6 disabled
7 disabled
TOM2: 0000000250000000 aka 9472M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 2783MB, range: 1MB, type UC
reg 3, base: 2784MB, range: 32MB, type UC
reg 4, base: 2816MB, range: 256MB, type UC
total RAM covered: 2783M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 256MB, type WB
reg 3, base: 2783MB, range: 1MB, type UC
reg 4, base: 2784MB, range: 32MB, type UC
e820: update [mem 0xadf00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xadf00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x24fe00000-0x24fffffff]
[mem 0x24fe00000-0x24fffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x24c000000-0x24fdfffff]
[mem 0x24c000000-0x24fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x24bffffff]
[mem 0x200000000-0x23fffffff] page 1G
[mem 0x240000000-0x24bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xad82efff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xad7fffff] page 2M
[mem 0xad800000-0xad82efff] page 4k
init_memory_mapping: [mem 0xadd75000-0xadefffff]
[mem 0xadd75000-0xadefffff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35bea000-0x36decfff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000ad882068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ad88ac40 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130725/tbfadt-603)
ACPI: DSDT 00000000ad882150 08AEC (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000adb0af80 00040
ACPI: APIC 00000000ad88ad38 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000ad88add8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000ad88ae18 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 00000000ad88aea8 00304 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024fffffff]
Initmem setup node 0 [mem 0x00000000-0x24fffffff]
NODE_DATA [mem 0x24fff7000-0x24fffbfff]
[ffffea0000000000-ffffea00093fffff] PMD -> [ffff880247600000-ffff88024f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x24fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xad82efff]
node 0: [mem 0xadd75000-0xadefffff]
node 0: [mem 0x100001000-0x24fffffff]
On node 0 totalpages: 2087253
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11047 pages used for memmap
DMA32 zone: 707002 pages, LIFO batch:31
Normal zone: 21504 pages used for memmap
Normal zone: 1376255 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xad82f000-0xad881fff]
PM: Registered nosave memory: [mem 0xad882000-0xad88bfff]
PM: Registered nosave memory: [mem 0xad88c000-0xad88cfff]
PM: Registered nosave memory: [mem 0xad88d000-0xadad8fff]
PM: Registered nosave memory: [mem 0xadad9000-0xadae9fff]
PM: Registered nosave memory: [mem 0xadaea000-0xadafefff]
PM: Registered nosave memory: [mem 0xadaff000-0xadb00fff]
PM: Registered nosave memory: [mem 0xadb01000-0xadb09fff]
PM: Registered nosave memory: [mem 0xadb0a000-0xadb0ffff]
PM: Registered nosave memory: [mem 0xadb10000-0xadb71fff]
PM: Registered nosave memory: [mem 0xadb72000-0xadd74fff]
PM: Registered nosave memory: [mem 0xadf00000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xadf00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88024fc00000 s86592 r8192 d24000 u262144
pcpu-alloc: s86592 r8192 d24000 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2054617
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ a4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ a4000000
PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
Memory: 8050384K/8349012K available (7320K kernel code, 1125K rwdata, 3384K rodata, 1324K init, 1416K bss, 298628K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1288 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4659.557 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 9319.11 BogoMIPS (lpj=18638228)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00adf00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e66000 - ffffffff81e6e000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28206 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (74552.91 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xad82f000-0xad881fff] (339968 bytes)
PM: Registering ACPI NVS region [mem 0xad88c000-0xad88cfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xadad9000-0xadae9fff] (69632 bytes)
PM: Registering ACPI NVS region [mem 0xadaff000-0xadb00fff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xadb0a000-0xadb0ffff] (24576 bytes)
PM: Registering ACPI NVS region [mem 0xadb72000-0xadd74fff] (2109440 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 23:42:48, date: 01/04/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: \_SB_.PCI0.AMDN: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfc10b000-0xfc10b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfc10a000-0xfc10afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfc109000-0xfc1090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfc108000-0xfc108fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfc107000-0xfc1070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfc100000-0xfc103fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfc106000-0xfc106fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfc105000-0xfc105fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfc104000-0xfc1040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:02:00.0: [197b:2362] type 00 class 0x010185
pci 0000:02:00.0: reg 0x10: [io 0xd040-0xd047]
pci 0000:02:00.0: reg 0x14: [io 0xd030-0xd033]
pci 0000:02:00.0: reg 0x18: [io 0xd020-0xd027]
pci 0000:02:00.0: reg 0x1c: [io 0xd010-0xd013]
pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd00f]
pci 0000:02:00.0: reg 0x24: [mem 0xfe610000-0xfe6101ff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:03:00.0: [197b:2362] type 00 class 0x010185
pci 0000:03:00.0: reg 0x10: [io 0xc040-0xc047]
pci 0000:03:00.0: reg 0x14: [io 0xc030-0xc033]
pci 0000:03:00.0: reg 0x18: [io 0xc020-0xc027]
pci 0000:03:00.0: reg 0x1c: [io 0xc010-0xc013]
pci 0000:03:00.0: reg 0x20: [io 0xc000-0xc00f]
pci 0000:03:00.0: reg 0x24: [mem 0xfe510000-0xfe5101ff]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfe400000-0xfe407fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:06:00.0: [10de:1184] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:06:00.0: reg 0x14: [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:06:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:06:00.0: reg 0x24: [io 0xb000-0xb07f]
pci 0000:06:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
pci 0000:06:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:06:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
pci 0000:00:0b.0: PCI bridge to [bus 06]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:00:0b.0: bridge window [mem 0xc8000000-0xd1ffffff 64bit pref]
pci 0000:07:07.0: [1106:3044] type 00 class 0x0c0010
pci 0000:07:07.0: reg 0x10: [mem 0xfe200000-0xfe2007ff]
pci 0000:07:07.0: reg 0x14: [io 0xa000-0xa07f]
pci 0000:07:07.0: supports D2
pci 0000:07:07.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 08]
pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [io 0x9000-0x90ff]
pci 0000:09:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
pci 0000:09:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 09]
pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.1: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xad82f000-0xafffffff]
e820: reserve RAM buffer [mem 0xadf00000-0xafffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:04.0: BAR 15: assigned [mem 0xc2000000-0xc20fffff pref]
pci 0000:00:05.0: BAR 15: assigned [mem 0xc2100000-0xc21fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xc2000000-0xc200ffff pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:04.0: bridge window [mem 0xc2000000-0xc20fffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xc2100000-0xc210ffff pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:05.0: bridge window [mem 0xc2100000-0xc21fffff pref]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:0b.0: PCI bridge to [bus 06]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:00:0b.0: bridge window [mem 0xc8000000-0xd1ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 07]
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:15.0: PCI bridge to [bus 08]
pci 0000:00:15.1: PCI bridge to [bus 09]
pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.1: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:02: resource 2 [mem 0xc2000000-0xc20fffff pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:03: resource 2 [mem 0xc2100000-0xc21fffff pref]
pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:05: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xfb000000-0xfc0fffff]
pci_bus 0000:06: resource 2 [mem 0xc8000000-0xd1ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xa000-0xafff]
pci_bus 0000:07: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x03af]
pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:07: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:07: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:07: resource 10 [mem 0xb0000000-0xffffffff]
pci_bus 0000:09: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:09: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18444K (ffff880035bea000 - ffff880036ded000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ a4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1388878969.552:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15888
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Console: switching to colour frame buffer device 160x64
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfc109000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12.0-4-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfc107000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.12.0-4-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfc104000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.12.0-4-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:04:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.12.0-4-generic xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.12.0-4-generic xhci_hcd
usb usb5: SerialNumber: 0000:04:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 87 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.12.0-4-generic xhci_hcd
usb usb6: SerialNumber: 0000:05:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.12.0-4-generic xhci_hcd
usb usb7: SerialNumber: 0000:05:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0685b4bdbf3d53f7d173ff4d690c01938d88ceee'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 14:393:756
tty ttyS7: hash matches
rtc_cmos 00:04: setting system clock to 2014-01-04 23:42:50 UTC (1388878970)
powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1324K (ffffffff81d1b000 - ffffffff81e66000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 860K (ffff880001729000 - ffff880001800000)
Freeing unused kernel memory: 712K (ffff880001b4e000 - ffff880001c00000)
systemd-udevd[147]: starting version 204
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:12.0: irq 18, io mem 0xfc10a000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
pcieport 0000:00:15.1: driver skip pci_set_master, fix it!
r8169 0000:09:00.0: irq 88 for MSI/MSI-X
r8169 0000:09:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c1c000, 10:bf:48:83:a5:15, XID 0c900800 IRQ 88
r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 3.12.0-4-generic ohci_hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:13.0: irq 20, io mem 0xfc108000
firewire_ohci 0000:07:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 3.12.0-4-generic ohci_hcd
usb usb9: SerialNumber: 0000:00:13.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:14.5: irq 18, io mem 0xfc106000
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 3.12.0-4-generic ohci_hcd
usb usb10: SerialNumber: 0000:00:14.5
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:16.0: irq 22, io mem 0xfc105000
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI PCI host controller
usb usb11: Manufacturer: Linux 3.12.0-4-generic ohci_hcd
usb usb11: SerialNumber: 0000:00:16.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfc10b000 port 0xfc10b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfc10b000 port 0xfc10b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfc10b000 port 0xfc10b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfc10b000 port 0xfc10b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfc10b000 port 0xfc10b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfc10b000 port 0xfc10b380 irq 19
pcieport 0000:00:04.0: driver skip pci_set_master, fix it!
ahci 0000:02:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe610000 port 0xfe610100 irq 44
ata8: SATA max UDMA/133 abar m512@0xfe610000 port 0xfe610180 irq 44
pcieport 0000:00:05.0: driver skip pci_set_master, fix it!
ahci 0000:03:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfe510000 port 0xfe510100 irq 46
ata10: SATA max UDMA/133 abar m512@0xfe510000 port 0xfe510180 irq 46
usb 3-1: New USB device found, idVendor=0dda, idProduct=2026
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: USB2.0 Card Reader
usb 3-1: Manufacturer: ICSI
usb 3-1: SerialNumber: 0000001
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi10 : usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
firewire_core 0000:07:07.0: created device fw0: GUID 001e8c0000484878, S400
tsc: Refined TSC clocksource calibration: 4659.580 MHz
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
ata4.00: configured for UDMA/100
ata1.00: ATA-8: Mushkin MKNSSDCL60GB-DX, 361A13F0, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Mushkin MKNSSDCL 361A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usb 9-1: new full-speed USB device number 2 using ohci-pci
usb 9-1: New USB device found, idVendor=0a12, idProduct=0001
usb 9-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 9-2: new low-speed USB device number 3 using ohci-pci
scsi 10:0:0:0: Direct-Access ICSI IC1210 CF 1.6E PQ: 0 ANSI: 0 CCS
scsi 10:0:0:1: Direct-Access ICSI IC1210 MS 1.6E PQ: 0 ANSI: 0 CCS
scsi 10:0:0:2: Direct-Access ICSI IC1210 MMC/SD 1.6E PQ: 0 ANSI: 0 CCS
scsi 10:0:0:3: Direct-Access ICSI IC1210 SM 1.6E PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:1: Attached scsi generic sg3 type 0
sd 10:0:0:2: Attached scsi generic sg4 type 0
sd 10:0:0:3: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdb] Attached SCSI removable disk
sd 10:0:0:1: [sdc] Attached SCSI removable disk
sd 10:0:0:2: [sdd] Attached SCSI removable disk
sd 10:0:0:3: [sde] Attached SCSI removable disk
usb 9-2: New USB device found, idVendor=040b, idProduct=2013
usb 9-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 9-2: Product: 2.4G wireless Keyboard&Mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: 2.4G wireless Keyboard&Mouse as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.0/input/input4
hid-generic 0003:040B:2013.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G wireless Keyboard&Mouse] on usb-0000:00:13.0-2/input0
input: 2.4G wireless Keyboard&Mouse as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.1/input/input5
hid-generic 0003:040B:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G wireless Keyboard&Mouse] on usb-0000:00:13.0-2/input1
Switched to clocksource tsc
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[474]: starting version 204
lp: driver loaded but no devices found
it87: Found IT8721F chip at 0x290, revision 1
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
pcieport 0000:00:02.0: driver skip pci_set_master, fix it!
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
pcieport 0000:00:0b.0: driver skip pci_set_master, fix it!
nvidia 0000:06:00.0: enabling device (0000 -> 0003)
vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:06:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90010e8eb00). heartbeat=60 sec (nowayout=0)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
usbcore: registered new interface driver btusb
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
microcode: CPU0: patch_level=0x0600081c
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
device-mapper: multipath: version 1.5.1 loaded
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
asus_wmi: Disabling ACPI video driver
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
microcode: CPU0: new patch_level=0x06000822
microcode: CPU1: patch_level=0x0600081c
microcode: CPU2: patch_level=0x0600081c
microcode: CPU2: new patch_level=0x06000822
microcode: CPU3: patch_level=0x0600081c
microcode: CPU4: patch_level=0x0600081c
type=1400 audit(1388878978.532:2): apparmor="STATUS" operation="profile_load" parent=639 profile="unconfined" name="/sbin/dhclient" pid=682 comm="apparmor_parser"
type=1400 audit(1388878978.532:3): apparmor="STATUS" operation="profile_load" parent=639 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=682 comm="apparmor_parser"
type=1400 audit(1388878978.532:4): apparmor="STATUS" operation="profile_load" parent=639 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=682 comm="apparmor_parser"
type=1400 audit(1388878978.532:5): apparmor="STATUS" operation="profile_replace" parent=615 profile="unconfined" name="/sbin/dhclient" pid=681 comm="apparmor_parser"
type=1400 audit(1388878978.532:6): apparmor="STATUS" operation="profile_replace" parent=615 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser"
type=1400 audit(1388878978.532:7): apparmor="STATUS" operation="profile_replace" parent=615 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser"
type=1400 audit(1388878978.532:8): apparmor="STATUS" operation="profile_replace" parent=639 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=682 comm="apparmor_parser"
type=1400 audit(1388878978.532:9): apparmor="STATUS" operation="profile_replace" parent=639 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=682 comm="apparmor_parser"
type=1400 audit(1388878978.532:10): apparmor="STATUS" operation="profile_replace" parent=615 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser"
type=1400 audit(1388878978.532:11): apparmor="STATUS" operation="profile_replace" parent=615 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser"
microcode: CPU4: new patch_level=0x06000822
microcode: CPU5: patch_level=0x0600081c
microcode: CPU6: patch_level=0x0600081c
microcode: CPU6: new patch_level=0x06000822
microcode: CPU7: patch_level=0x0600081c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
hda_intel: Disabling MSI
hda-intel 0000:06:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:06:00.1: Disabling 64bit DMA
hda-intel 0000:06:00.1: Enable delay in RIRB handling
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (831) terminated with status 1
init: failsafe main process (769) killed by TERM signal
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input20
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:06:00.1/sound/card2/input19
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
r8169 0000:09:00.0 eth0: link down
r8169 0000:09:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
nvidia 0000:01:00.0: irq 89 for MSI/MSI-X
r8169 0000:09:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia 0000:06:00.0: irq 90 for MSI/MSI-X
init: plymouth-stop pre-start process (2958) terminated with status 1
systemd-hostnamed[3819]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
audit_printk_skb: 186 callbacks suppressed
type=1400 audit(1388880416.309:74): apparmor="STATUS" operation="profile_replace" parent=348 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=354 comm="apparmor_parser"
type=1400 audit(1388880416.309:75): apparmor="STATUS" operation="profile_replace" parent=348 profile="unconfined" name="/usr/sbin/cupsd" pid=354 comm="apparmor_parser"
type=1400 audit(1388880416.309:76): apparmor="STATUS" operation="profile_replace" parent=348 profile="unconfined" name="/usr/sbin/cupsd" pid=354 comm="apparmor_parser"