dmesg - diskwrite2

Return To diskwrite2 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-57-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #87-Ubuntu SMP Tue Nov 12 21:35:10 UTC 2013 (Ubuntu 3.2.0-57.87-generic 3.2.52)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf760000 (usable)
 BIOS-e820: 00000000bf76e000 - 00000000bf770000 (reserved)
 BIOS-e820: 00000000bf770000 - 00000000bf77e000 (ACPI data)
 BIOS-e820: 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS)
 BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
 BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000001040000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: HP ProLiant DL180 G6  , BIOS O20 05/01/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x1040000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-E3FFF write-protect
  E4000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask F000000000 write-back
  1 base 1000000000 mask FFC0000000 write-back
  2 base 00C0000000 mask FFC0000000 uncachable
  3 base 00BF800000 mask FFFF800000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 64GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3064MB, range: 8MB, type UC
total RAM covered: 65528M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 8  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 32GB, type WB
reg 7, base: 64GB, range: 1GB, type WB
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf760 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf760000
 0000000000 - 0080000000 page 1G
 0080000000 - 00bf600000 page 2M
 00bf600000 - 00bf760000 page 4k
kernel direct mapping tables up to bf760000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000001040000000
 0100000000 - 1040000000 page 1G
kernel direct mapping tables up to 1040000000 @ bf75f000-bf760000
RAMDISK: 364c4000 - 3725a000
ACPI: RSDP 00000000000fa170 00024 (v02 HP    )
ACPI: XSDT 00000000bf770100 000A4 (v01 HP     ProLiant 20120501 MSFT 00000097)
ACPI: FACP 00000000bf770290 000F4 (v04 HP     ProLiant 20120501 MSFT 00000097)
ACPI: DSDT 00000000bf770740 05EF3 (v02 HP     ProLiant 00000241 INTL 20051117)
ACPI: FACS 00000000bf77e000 00040
ACPI: APIC 00000000bf770390 0011E (v02 HP     ProLiant 20120501 MSFT 00000097)
ACPI: SPCR 00000000bf7704b0 00050 (v01 HP     ProLiant 20120501 MSFT 00000097)
ACPI: MCFG 00000000bf770500 0003C (v01 HP     ProLiant 20120501 MSFT 00000097)
ACPI: SPMI 00000000bf770540 00041 (v05 HP     ProLiant 20120501 MSFT 00000097)
ACPI: SLIC 00000000bf770590 00176 (v01 HP     SLIC2241 20120501 MSFT 00000097)
ACPI: BOOT 00000000bf770710 00028 (v01 HP     ProLiant 20120501 MSFT 00000097)
ACPI: OEMB 00000000bf77e040 0007A (v01 HP     ProLiant 20120501 MSFT 00000097)
ACPI: HPET 00000000bf77a740 00038 (v01 HP     ProLiant 20120501 MSFT 00000097)
ACPI: SRAT 00000000bf77a780 001D0 (v02 HP     ProLiant 00000001 INTL 00000001)
ACPI: DMAR 00000000bf77e0c0 00108 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 00000000bf7816e0 00363 (v01 HP     ProLiant 00000012 INTL 20051117)
ACPI: EINJ 00000000bf77a950 00130 (v01     HP ProLiant 20120501 MSFT 00000097)
ACPI: BERT 00000000bf77aae0 00030 (v01     HP ProLiant 20120501 MSFT 00000097)
ACPI: ERST 00000000bf77ab10 001B0 (v01     HP ProLiant 20120501 MSFT 00000097)
ACPI: HEST 00000000bf77acc0 000A8 (v01     HP ProLiant 20120501 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-c0000000
SRAT: Node 0 PXM 0 100000000-840000000
SRAT: Node 1 PXM 1 840000000-1040000000
NUMA: Node 0 [0,a0000) + [100000,c0000000) -> [0,c0000000)
NUMA: Node 0 [0,c0000000) + [100000000,840000000) -> [0,840000000)
Initmem setup node 0 0000000000000000-0000000840000000
  NODE_DATA [000000083fffb000 - 000000083fffffff]
Initmem setup node 1 0000000840000000-0000001040000000
  NODE_DATA [000000103fffb000 - 000000103fffffff]
 [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081fe00000-ffff88083fdfffff] on node 0
 [ffffea0021000000-ffffea0040ffffff] PMD -> [ffff88101f600000-ffff88103f5fffff] on node 1
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x01040000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x000bf760
    0: 0x00100000 -> 0x00840000
    1: 0x00840000 -> 0x01040000
On node 0 totalpages: 8386286
  DMA zone: 64 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3913 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 763808 pages, LIFO batch:31
  Normal zone: 118784 pages used for memmap
  Normal zone: 7483392 pages, LIFO batch:31
On node 1 totalpages: 8388608
  Normal zone: 131072 pages used for memmap
  Normal zone: 8257536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 24 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf760000 - 00000000bf76e000
PM: Registered nosave memory: 00000000bf76e000 - 00000000bf770000
PM: Registered nosave memory: 00000000bf770000 - 00000000bf77e000
PM: Registered nosave memory: 00000000bf77e000 - 00000000bf7d0000
PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:24 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff88081fc00000 s83136 r8192 d23360 u131072
pcpu-alloc: s83136 r8192 d23360 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 08 09 10 11 16 18 20 22 -- -- -- -- 
pcpu-alloc: [1] 04 05 06 07 12 13 14 15 17 19 21 23 -- -- -- -- 
Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 16508649
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65952368k/68157440k available (6586k kernel code, 1057864k absent, 1147208k reserved, 6619k data, 924k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1280 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 536870912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2399.837 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.67 BogoMIPS (lpj=9599348)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 26597 entries in 105 pages
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020f6
DMAR: RMRR base: 0x000000000ed000 end: 0x000000000effff
DMAR: RMRR base: 0x000000bf7ed000 end: 0x000000bf7fffff
DMAR: ATSR flags: 0x0
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #3
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 Ok.
Booting Node   1, Processors  #4
smpboot cpu 4: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #5
smpboot cpu 5: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #6
smpboot cpu 6: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #7
smpboot cpu 7: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 Ok.
Booting Node   0, Processors  #8
smpboot cpu 8: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #9
smpboot cpu 9: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #10
smpboot cpu 10: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #11
smpboot cpu 11: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 Ok.
Booting Node   1, Processors  #12
smpboot cpu 12: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #13
smpboot cpu 13: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #14
smpboot cpu 14: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
 #15
smpboot cpu 15: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 16 CPUs
Total of 16 processors activated (76802.33 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at bf77e000 (335872 bytes)
print_constraints: dummy: 
RTC time:  5:56:31, date: 12/26/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf77e1d0 02B94 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 02B94 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bf780d70 00961 (v01  PmRef  P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00961 (v01  PmRef  P001Cst 00003001 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3406] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: [8086:3410] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io  0xb800-0xb81f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfaff8000-0xfaff83ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0xb880-0xb89f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0xbc00-0xbc1f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0xc000-0xc01f]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfaffa000-0xfaffa3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 003f)
pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0xc880-0xc887]
pci 0000:00:1f.2: reg 14: [io  0xc800-0xc803]
pci 0000:00:1f.2: reg 18: [io  0xc480-0xc487]
pci 0000:00:1f.2: reg 1c: [io  0xc400-0xc403]
pci 0000:00:1f.2: reg 20: [io  0xc080-0xc09f]
pci 0000:00:1f.2: reg 24: [mem 0xfaffc000-0xfaffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:07:00.0: [8086:10c9] type 0 class 0x000200
pci 0000:07:00.0: reg 10: [mem 0xfbe60000-0xfbe7ffff]
pci 0000:07:00.0: reg 14: [mem 0xfbe40000-0xfbe5ffff]
pci 0000:07:00.0: reg 18: [io  0xe880-0xe89f]
pci 0000:07:00.0: reg 1c: [mem 0xfbeb8000-0xfbebbfff]
pci 0000:07:00.0: reg 30: [mem 0xfbe20000-0xfbe3ffff pref]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:07:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.1: [8086:10c9] type 0 class 0x000200
pci 0000:07:00.1: reg 10: [mem 0xfbee0000-0xfbefffff]
pci 0000:07:00.1: reg 14: [mem 0xfbec0000-0xfbedffff]
pci 0000:07:00.1: reg 18: [io  0xec00-0xec1f]
pci 0000:07:00.1: reg 1c: [mem 0xfbebc000-0xfbebffff]
pci 0000:07:00.1: reg 30: [mem 0xfbe80000-0xfbe9ffff pref]
pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
pci 0000:07:00.1: PME# disabled
pci 0000:07:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 07-07]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:06:00.0: [103c:323a] type 0 class 0x000104
pci 0000:06:00.0: reg 10: [mem 0xfbc00000-0xfbdfffff 64bit]
pci 0000:06:00.0: reg 18: [mem 0xfbbff000-0xfbbfffff 64bit]
pci 0000:06:00.0: reg 20: [io  0xd800-0xd8ff]
pci 0000:06:00.0: reg 30: [mem 0xfbb00000-0xfbb7ffff pref]
pci 0000:06:00.0: PME# supported from D0
pci 0000:06:00.0: PME# disabled
pci 0000:00:03.0: PCI bridge to [bus 06-06]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xfbb00000-0xfbdfffff]
pci 0000:00:07.0: PCI bridge to [bus 05-05]
pci 0000:00:09.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci 0000:02:00.0: [102b:0522] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xf8000000-0xf8ffffff pref]
pci 0000:02:00.0: reg 14: [mem 0xfbafc000-0xfbafffff]
pci 0000:02:00.0: reg 18: [mem 0xfb000000-0xfb7fffff]
pci 0000:02:00.0: reg 30: [mem 0xfbae0000-0xfbaeffff pref]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4:   bridge window [mem 0xfb000000-0xfbafffff]
pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf8ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
pci 0000:fe:00.0: [8086:2c70] type 0 class 0x000600
pci 0000:fe:00.1: [8086:2d81] type 0 class 0x000600
pci 0000:fe:02.0: [8086:2d90] type 0 class 0x000600
pci 0000:fe:02.1: [8086:2d91] type 0 class 0x000600
pci 0000:fe:02.2: [8086:2d92] type 0 class 0x000600
pci 0000:fe:02.3: [8086:2d93] type 0 class 0x000600
pci 0000:fe:02.4: [8086:2d94] type 0 class 0x000600
pci 0000:fe:02.5: [8086:2d95] type 0 class 0x000600
pci 0000:fe:03.0: [8086:2d98] type 0 class 0x000600
pci 0000:fe:03.1: [8086:2d99] type 0 class 0x000600
pci 0000:fe:03.2: [8086:2d9a] type 0 class 0x000600
pci 0000:fe:03.4: [8086:2d9c] type 0 class 0x000600
pci 0000:fe:04.0: [8086:2da0] type 0 class 0x000600
pci 0000:fe:04.1: [8086:2da1] type 0 class 0x000600
pci 0000:fe:04.2: [8086:2da2] type 0 class 0x000600
pci 0000:fe:04.3: [8086:2da3] type 0 class 0x000600
pci 0000:fe:05.0: [8086:2da8] type 0 class 0x000600
pci 0000:fe:05.1: [8086:2da9] type 0 class 0x000600
pci 0000:fe:05.2: [8086:2daa] type 0 class 0x000600
pci 0000:fe:05.3: [8086:2dab] type 0 class 0x000600
pci 0000:fe:06.0: [8086:2db0] type 0 class 0x000600
pci 0000:fe:06.1: [8086:2db1] type 0 class 0x000600
pci 0000:fe:06.2: [8086:2db2] type 0 class 0x000600
pci 0000:fe:06.3: [8086:2db3] type 0 class 0x000600
PCI: Discovered peer bus ff
pci 0000:ff:00.0: [8086:2c70] type 0 class 0x000600
pci 0000:ff:00.1: [8086:2d81] type 0 class 0x000600
pci 0000:ff:02.0: [8086:2d90] type 0 class 0x000600
pci 0000:ff:02.1: [8086:2d91] type 0 class 0x000600
pci 0000:ff:02.2: [8086:2d92] type 0 class 0x000600
pci 0000:ff:02.3: [8086:2d93] type 0 class 0x000600
pci 0000:ff:02.4: [8086:2d94] type 0 class 0x000600
pci 0000:ff:02.5: [8086:2d95] type 0 class 0x000600
pci 0000:ff:03.0: [8086:2d98] type 0 class 0x000600
pci 0000:ff:03.1: [8086:2d99] type 0 class 0x000600
pci 0000:ff:03.2: [8086:2d9a] type 0 class 0x000600
pci 0000:ff:03.4: [8086:2d9c] type 0 class 0x000600
pci 0000:ff:04.0: [8086:2da0] type 0 class 0x000600
pci 0000:ff:04.1: [8086:2da1] type 0 class 0x000600
pci 0000:ff:04.2: [8086:2da2] type 0 class 0x000600
pci 0000:ff:04.3: [8086:2da3] type 0 class 0x000600
pci 0000:ff:05.0: [8086:2da8] type 0 class 0x000600
pci 0000:ff:05.1: [8086:2da9] type 0 class 0x000600
pci 0000:ff:05.2: [8086:2daa] type 0 class 0x000600
pci 0000:ff:05.3: [8086:2dab] type 0 class 0x000600
pci 0000:ff:06.0: [8086:2db0] type 0 class 0x000600
pci 0000:ff:06.1: [8086:2db1] type 0 class 0x000600
pci 0000:ff:06.2: [8086:2db2] type 0 class 0x000600
pci 0000:ff:06.3: [8086:2db3] type 0 class 0x000600
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e000 - 000000000009ffff 
reserve RAM buffer: 00000000bf760000 - 00000000bfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io  0x0a00-0x0a7f]
pnp 00:07: [io  0x0a80-0x0a83]
pnp 00:07: [io  0x0a84-0x0a85]
pnp 00:07: [io  0x0a86-0x0a8d]
pnp 00:07: [io  0x0a90-0x0a9f]
pnp 00:07: [io  0x0b00-0x0bfe]
system 00:07: [io  0x0a00-0x0a7f] has been reserved
system 00:07: [io  0x0a80-0x0a83] has been reserved
system 00:07: [io  0x0a84-0x0a85] has been reserved
system 00:07: [io  0x0a86-0x0a8d] has been reserved
system 00:07: [io  0x0a90-0x0a9f] has been reserved
system 00:07: [io  0x0b00-0x0bfe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x0010-0x001f]
pnp 00:08: [io  0x0022-0x003f]
pnp 00:08: [io  0x0044-0x004d]
pnp 00:08: [io  0x0050-0x005f]
pnp 00:08: [io  0x0062-0x0063]
pnp 00:08: [io  0x0065-0x006f]
pnp 00:08: [io  0x0072-0x007f]
pnp 00:08: [io  0x0080]
pnp 00:08: [io  0x0084-0x0086]
pnp 00:08: [io  0x0088]
pnp 00:08: [io  0x008c-0x008e]
pnp 00:08: [io  0x0090-0x009f]
pnp 00:08: [io  0x00a2-0x00bf]
pnp 00:08: [io  0x00e0-0x00ef]
pnp 00:08: [io  0x04d0-0x04d1]
pnp 00:08: [io  0x0800-0x087f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0500-0x057f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed40000-0xfed8ffff]
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x0ca2]
pnp 00:09: [io  0x0ca3]
pnp 00:09: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:0a: [io  0x0ca4]
pnp 00:0a: [io  0x0ca5]
pnp 00:0a: Plug and Play ACPI device, IDs HPQ000b (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0c: [io  0x0060]
pnp 00:0c: [io  0x0064]
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0xbfffffff]
pnp 00:0e: [mem 0xfed90000-0xffffffff]
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.4: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:07:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: BAR 7: assigned [mem 0xfbe00000-0xfbe1ffff 64bit]
pci 0000:07:00.0: BAR 7: set to [mem 0xfbe00000-0xfbe1ffff 64bit] (PCI address [0xfbe00000-0xfbe1ffff])
pci 0000:07:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.0: BAR 10: can't assign mem (size 0x20000)
pci 0000:07:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.1: BAR 7: can't assign mem (size 0x20000)
pci 0000:07:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:07:00.1: BAR 10: can't assign mem (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 07-07]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: PCI bridge to [bus 06-06]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xfbb00000-0xfbdfffff]
pci 0000:00:07.0: PCI bridge to [bus 05-05]
pci 0000:00:09.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.4:   bridge window [mem 0xfb000000-0xfbafffff]
pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf8ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0146 -> 0147)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbdfffff]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:03: resource 2 [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfbafffff]
pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf8ffffff 64bit pref]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:fe: resource 0 [io  0x0000-0xffff]
pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bb760000 - ffff8800bf760000
software IO TLB at phys 0xbb760000 - 0xbf760000
Simple Boot Flag at 0x6d set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1388037390.636:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
APEI: Can not request iomem region  for GARs.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Freeing initrd memory: 13912k freed
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 66 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc100 irq 66
ata2: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc180 irq 66
ata3: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc200 irq 66
ata4: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc280 irq 66
ata5: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc300 irq 66
ata6: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc380 irq 66
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfaff8000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfaffa000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 2400.084 MHz.
Switching to clocksource tsc
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 9:410:922
rtc_cmos 00:03: setting system clock to 2013-12-26 05:56:35 UTC (1388037395)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 924k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1588k freed
Freeing unused kernel memory: 1188k freed
udevd[166]: starting version 175
dca service started, version 1.12.1
HP HPSA Driver (v 2.0.2-1)
hpsa 0000:06:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
hpsa 0000:06:00.0: MSIX
hpsa 0000:06:00.0: irq 67 for MSI/MSI-X
hpsa 0000:06:00.0: irq 68 for MSI/MSI-X
hpsa 0000:06:00.0: irq 69 for MSI/MSI-X
hpsa 0000:06:00.0: irq 70 for MSI/MSI-X
Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
Copyright (c) 2007-2011 Intel Corporation.
igb 0000:07:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
igb 0000:07:00.0: setting latency timer to 64
igb 0000:07:00.0: irq 71 for MSI/MSI-X
igb 0000:07:00.0: irq 72 for MSI/MSI-X
igb 0000:07:00.0: irq 73 for MSI/MSI-X
igb 0000:07:00.0: irq 74 for MSI/MSI-X
igb 0000:07:00.0: irq 75 for MSI/MSI-X
igb 0000:07:00.0: irq 76 for MSI/MSI-X
igb 0000:07:00.0: irq 77 for MSI/MSI-X
igb 0000:07:00.0: irq 78 for MSI/MSI-X
igb 0000:07:00.0: irq 79 for MSI/MSI-X
hpsa 0000:06:00.0: hpsa0:  at IRQ 67 using DAC
scsi6 : hpsa
hpsa 0000:06:00.0: RAID              device c6b0t0l0 added.
hpsa 0000:06:00.0: Direct-Access     device c6b0t0l1 added.
scsi 6:0:0:0: RAID              HP       P410             5.70 PQ: 0 ANSI: 5
scsi 6:0:0:1: Direct-Access     HP       LOGICAL VOLUME   5.70 PQ: 0 ANSI: 5
scsi 6:0:0:0: Attached scsi generic sg0 type 12
sd 6:0:0:1: Attached scsi generic sg1 type 0
sd 6:0:0:1: [sda] 11720890544 512-byte logical blocks: (6.00 TB/5.45 TiB)
sd 6:0:0:1: [sda] 4096-byte physical blocks
sd 6:0:0:1: [sda] Write Protect is off
sd 6:0:0:1: [sda] Mode Sense: 6b 00 00 08
sd 6:0:0:1: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 6:0:0:1: [sda] Attached SCSI disk
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x4) e4:11:5b:e5:2f:b4
igb 0000:07:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:07:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40
igb 0000:07:00.1: setting latency timer to 64
igb 0000:07:00.1: irq 80 for MSI/MSI-X
igb 0000:07:00.1: irq 81 for MSI/MSI-X
igb 0000:07:00.1: irq 82 for MSI/MSI-X
igb 0000:07:00.1: irq 83 for MSI/MSI-X
igb 0000:07:00.1: irq 84 for MSI/MSI-X
igb 0000:07:00.1: irq 85 for MSI/MSI-X
igb 0000:07:00.1: irq 86 for MSI/MSI-X
igb 0000:07:00.1: irq 87 for MSI/MSI-X
igb 0000:07:00.1: irq 88 for MSI/MSI-X
igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.1: eth1: (PCIe:2.5Gb/s:Width x4) e4:11:5b:e5:2f:b5
igb 0000:07:00.1: eth1: PBA No: FFFFFF-0FF
igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Adding 67099644k swap on /dev/sda3.  Priority:-1 extents:1 across:67099644k 
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[456]: starting version 175
lp: driver loaded but no devices found
EDAC MC: Ver: 2.1.0
EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
hpsa 0000:06:00.0: cp ffff880036d00500 has check condition: unknown type: Sense: 0x5, ASC: 0x20, ASCQ: 0x0, Returning result: 0x2, cmd=[85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00]
hpsa 0000:06:00.0: cp ffff880036d00000 has check condition: unknown type: Sense: 0x5, ASC: 0x20, ASCQ: 0x0, Returning result: 0x2, cmd=[85 08 0e 00 00 00 01 00 00 00 00 00 00 40 ec 00]
type=1400 audit(1388037400.991:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=730 comm="apparmor_parser"
type=1400 audit(1388037400.991:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=730 comm="apparmor_parser"
type=1400 audit(1388037400.991:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=730 comm="apparmor_parser"
type=1400 audit(1388037400.991:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=706 comm="apparmor_parser"
type=1400 audit(1388037400.991:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=706 comm="apparmor_parser"
type=1400 audit(1388037400.991:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=706 comm="apparmor_parser"
type=1400 audit(1388037401.019:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=732 comm="apparmor_parser"
type=1400 audit(1388037401.019:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=732 comm="apparmor_parser"
type=1400 audit(1388037401.019:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=732 comm="apparmor_parser"
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf8000000, mapped to 0xffffc90018080000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
ADDRCONF(NETDEV_UP): eth0: link is not ready
fb0: VESA VGA frame buffer device
init: failsafe main process (768) killed by TERM signal
type=1400 audit(1388037401.579:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=898 comm="apparmor_parser"
igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Return To diskwrite2 System Information